All MIBs › TIMETRA-MSDP-NG-MIB
Organization: Nokia
Last Updated: 2016-01-01
Description: TIMETRA-MSDP-NG-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-MSDP-NG-MIB?
This is a Nokia (formerly Alcatel-Lucent) proprietary SNMP MIB for SROS routers that manages and provisions the Multicast Source Discovery Protocol (MSDP), which interconnects multicast routing domains by letting PIM rendezvous points share active-source information much like BGP peering. It exposes global MSDP settings, peer message-rate thresholds, data encapsulation mode, and export policy bindings. It is used heavily to monitor the software/protocol health of the multicast control plane: admin state of MSDP, the received message rate against a configured threshold, and the maximum number of active sources permitted, all flagging overload or misbehaving peers. It depends conceptually on PIM and BGP-style peering standards, since MSDP's peer session model mirrors BGP TCP-based sessions. It is deployed in service-provider core/edge networks running multicast services such as IPTV on Nokia 7750 SR/7950 XRS SROS routers. Engineers can download the TIMETRA-MSDP-NG-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-MSDP-NG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia/Alcatel-Lucent 7750 SR / 7950 XRS SROS router
Monitoring Examples
An admin polls tmnxMsdpNgGeneralTable/tmnxMsdpNgGeneralEntry to read tmnxMsdpNgMsgRcvRate against tmnxMsdpNgMsgRcvRateThd, where a sustained rate above threshold points to a flooding or misconfigured peer generating excessive Source-Active messages. tmnxMsdpNgMaxActiveSources shows how close the router is to its configured cap on active multicast sources, useful for capacity planning. tmnxMsdpNgAdminState confirms whether MSDP is administratively enabled, and tmnxMsdpNgDataEncapsulation reveals the negotiated encapsulation mode for forwarded multicast data.
What Can Be Monitored
- MSDP admin state
- received message rate vs threshold
- maximum active multicast sources
- data encapsulation mode
- export policy assignment
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressPrefixLength | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TimeInterval | |
| TimeStamp | |
| TruthValue |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From TIMETRA-TC-MIB
| TNamedItem | |
| TNamedItemOrEmpty | |
| TPolicyStatementNameOrEmpty | |
| TmnxAdminState |
From TIMETRA-VRTR-MIB
| vRtrID | OBJECT-TYPE |
How to Use in IPNetwork Monitor
Example using tmnxMsdpNgStatusActSrcLimExceed OID:
Select a Nokia/Alcatel-Lucent 7750 SR / 7950 XRS SROS router (MSDP peer admin state/message-rate status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxMsdpNgStatusActSrcLimExceed into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tmnxMsdpNgStatusActSrcLimExceed indicates the number of times the global active source limit has been exceeded. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| timetraMsdpNgMIBModule | 1.3.6.1.4.1.6527.1.1.3.104 | This is the SNMP MIB module to manage and provision MSDP protocol on Nokia SROS equipment. The Multicast Source Discovery Protocol (MSDP) is used to connect multicast routing domains. It typically runs on the same router as the Protocol Independent Multicast (PIM) sparse-mode rendezvous point (RP). Each MSDP router establishes adjacencies with internal and external MSDP peers similar to the Border Gateway Protocol (BGP). These peer routers inform each other about active sources within the domain. When they detect active sources, the routers can send PIM sparse-mode explicit join messages to the active source. Copyright 2014-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tmnxMsdpNgConformance | 1.3.6.1.4.1.6527.3.1.1.104 | |||
| tmnxMsdpNgCompliances | 1.3.6.1.4.1.6527.3.1.1.104.1 | |||
| tmnxMsdpNgV13v0Compliance | 1.3.6.1.4.1.6527.3.1.1.104.1.1 | The compliance statement for management of MSDP features on Nokia 7x50 SR series systems. | ||
| tmnxMsdpNgGroups | 1.3.6.1.4.1.6527.3.1.1.104.2 | |||
| tmnxMsdpNgGeneralGroup | 1.3.6.1.4.1.6527.3.1.1.104.2.1 | A collection of global objects supporting management of MSDP protocol on Nokia 7x50 SR series systems. | ||
| tmnxMsdpNgPeerGroup | 1.3.6.1.4.1.6527.3.1.1.104.2.2 | A collection of objects supporting management of MSDP peers on Nokia 7x50 SR series systems. | ||
| tmnxMsdpNgPeerGroupGroup | 1.3.6.1.4.1.6527.3.1.1.104.2.3 | A collection of objects supporting management of MSDP peer groups on Nokia 7x50 SR series systems. | ||
| tmnxMsdpNgSourceGroup | 1.3.6.1.4.1.6527.3.1.1.104.2.4 | A collection of objects supporting management of MSDP sources on Nokia 7x50 SR series systems. | ||
| tmnxMsdpNgSAGroup | 1.3.6.1.4.1.6527.3.1.1.104.2.5 | A collection of objects supporting management of MSDP source active information on Nokia 7x50 SR series systems. | ||
| tmnxMsdpNgNotificationGroup | 1.3.6.1.4.1.6527.3.1.1.104.2.6 | The group of notifications supporting management of the MSDP operations on Nokia 7x50 SR series systems. | ||
| tmnxMsdpNgSARejGroup | 1.3.6.1.4.1.6527.3.1.1.104.2.7 | A collection of objects supporting management of MSDP rejected source active information on Nokia 7x50 SR series systems. | ||
| tmnxMsdpNgObjects | 1.3.6.1.4.1.6527.3.1.2.104 | |||
| tmnxMsdpNgGlobals | 1.3.6.1.4.1.6527.3.1.2.104.1 | |||
| TIM tmnxMsdpNgGeneralTableLstChanged | 1.3.6.1.4.1.6527.3.1.2.104.1.1 | TimeStamp | read-only | The value of tmnxMsdpNgGeneralTableLstChanged indicates the sysUpTime at the time of the last modification of an entry in the tmnxMsdpNgGeneralTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxMsdpNgGeneralTable | 1.3.6.1.4.1.6527.3.1.2.104.2 | not-accessible | The tmnxMsdpNgGeneralTable contains objects for general control and management of the MSDP protocol instance within a virtual router. | |
| tmnxMsdpNgGeneralEntry | 1.3.6.1.4.1.6527.3.1.2.104.2.1 | not-accessible | Each row entry represents an instance of the MSDP protocol running within a virtual router. Entries in this table cannot be created and deleted via SNMP SET operations. | |
| I32 tmnxMsdpNgMaxActiveSources | 1.3.6.1.4.1.6527.3.1.2.104.2.1.1 | Integer32 | read-write | The value of tmnxMsdpNgMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of source active messages that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of '0' means that no source active messages will be accepted. |
| U32 tmnxMsdpNgMsgRcvRate | 1.3.6.1.4.1.6527.3.1.2.104.2.1.2 | Unsigned32 | read-write | The value of tmnxMsdpNgMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpNgMsgRcvRateTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value '0'. Once the number of MSDP packets defined in tmnxMsdpNgMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgMsgRcvRateTime seconds have elapsed. |
| U32 tmnxMsdpNgMsgRcvRateTime | 1.3.6.1.4.1.6527.3.1.2.104.2.1.3 | Unsigned32 | read-write | The value of tmnxMsdpNgMsgRcvRateTime specifies the time in seconds that together with tmnxMsdpNgMsgRcvRate defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value '0'. Once the number of MSDP packets defined in tmnxMsdpNgMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgMsgRcvRateTime seconds have elapsed. |
| G32 tmnxMsdpNgMsgRcvRateThd | 1.3.6.1.4.1.6527.3.1.2.104.2.1.4 | Gauge32 | read-write | The value of tmnxMsdpNgMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpNgMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value '0'. Once the number of MSDP packets defined in tmnxMsdpNgMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgMsgRcvRateTime seconds have elapsed. |
| T/F tmnxMsdpNgDataEncapsulation | 1.3.6.1.4.1.6527.3.1.2.104.2.1.5 | TruthValue | read-write | The value of tmnxMsdpNgDataEncapsulation is used to configure a rendezvous point (RP) using MSDP to encapsulate multicast data received in MSDP register messages inside forwarded MSDP source-active messages. By default data encapsulation is enabled. |
| TMN tmnxMsdpNgAdminState | 1.3.6.1.4.1.6527.3.1.2.104.2.1.6 | TmnxAdminState | read-write | The value of tmnxMsdpNgAdminState specifies the desired administrative state for MSDP. When MSDP is 'outOfService' the operational state of MSDP as well as the operational state of other entities under it, like peer or peer group is also disabled. |
| TPO tmnxMsdpNgExportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.7 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgExportPolicy1 specifies the first export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgExportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.8 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgExportPolicy2 specifies the second export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgExportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.9 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgExportPolicy3 specifies the third export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgExportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.10 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgExportPolicy4 specifies the fourth export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgExportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.11 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgExportPolicy5 specifies the fifth export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgImportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.12 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgImportPolicy1 specifies the first import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgImportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.13 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgImportPolicy2 specifies the second import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgImportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.14 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgImportPolicy3 specifies the third import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgImportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.15 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgImportPolicy4 specifies the fourth import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgImportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.104.2.1.16 | TPolicyStatementNameOrEmpty | read-write | The value of tmnxMsdpNgImportPolicy5 specifies the fifth import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced. |
| IPt tmnxMsdpNgLocalAddressType | 1.3.6.1.4.1.6527.3.1.2.104.2.1.17 | InetAddressType | read-write | The value of tmnxMsdpNgLocalAddressType specifies the type of tmnxMsdpNgLocalAddress. |
| IP tmnxMsdpNgLocalAddress | 1.3.6.1.4.1.6527.3.1.2.104.2.1.18 | InetAddress | read-write | The value of tmnxMsdpNgLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured. |
| G32 tmnxMsdpNgStatusPeerCount | 1.3.6.1.4.1.6527.3.1.2.104.2.1.19 | Gauge32 | read-only | The value of tmnxMsdpNgStatusPeerCount indicates the number of configured peers. |
| G32 tmnxMsdpNgStatusPeersEstablished | 1.3.6.1.4.1.6527.3.1.2.104.2.1.20 | Gauge32 | read-only | The value of tmnxMsdpNgStatusPeersEstablished indicates the number of peers in established state. |
| G32 tmnxMsdpNgStatusSACount | 1.3.6.1.4.1.6527.3.1.2.104.2.1.21 | Gauge32 | read-only | The value of tmnxMsdpNgStatusSACount indicates the number of source active configured in cache. |
| TIM tmnxMsdpNgStatusLastTimeUp | 1.3.6.1.4.1.6527.3.1.2.104.2.1.22 | TimeStamp | read-only | The value of tmnxMsdpNgStatusLastTimeUp indicates the last time the protocol was enabled. |
| C32 tmnxMsdpNgStatusActSrcLimExceedEx | 1.3.6.1.4.1.6527.3.1.2.104.2.1.23 | Counter32 | read-only | The value of tmnxMsdpNgStatusActSrcLimExceed indicates the number of times the global active source limit has been exceeded. |
| INT tmnxMsdpNgRpfLookupSequence | 1.3.6.1.4.1.6527.3.1.2.104.2.1.24 | INTEGER | read-write | tmnxMsdpNgRpfLookupSequence is used to configure the sequence of route tables that MSDP uses for finding a Reverse Path Forwarding(RPF) interface for a particular multicast route. 'mucastRouteTable' is the unicast route table to be used only by multicast protocols(MSDP) which will contain routes submitted by multi-protocol BGP, ISIS and OSPF. 'ucastRouteTable' is the regular unicast route table which will contain routes submitted by all the unicast routing protocols. By default, only the 'ucastRouteTable' is looked up by MSDP for calculating RPF interface towards the source/rendezvous point. However the operator can specify the following: a) Use unicast route table only b) Use multicast unicast route table only or c) Use both the route tables. In case of (c), MSDP will always lookup first in the 'mucastRouteTable' and if there is a route, it will use it. If MSDP does not find a route in the first lookup, it will try to find it in the 'ucastRouteTable'. |
| U32 tmnxMsdpNgSACacheLifetime | 1.3.6.1.4.1.6527.3.1.2.104.2.1.25 | Unsigned32 | read-write | The value of tmnxMsdpNgSACacheLifetime specifies lifetime given to SA cache entries in seconds when created or refreshed. This object does not measure time per se; instead, it is the delta from the time at which an SA message is received at which it should be expired if not refreshed. (i.e., it is the value of tmnxMsdpNgSAExpiryTime immediately after receiving an SA message applying to that row.) |
| C32 tmnxMsdpNgSARejectExportPolicy | 1.3.6.1.4.1.6527.3.1.2.104.2.1.26 | Counter32 | read-only | The value of tmnxMsdpNgSARejectExportPolicy indicates number of SA messages that were not sent due to export policy. |
| C32 tmnxMsdpNgSARejectImportPolicy | 1.3.6.1.4.1.6527.3.1.2.104.2.1.27 | Counter32 | read-only | The value of tmnxMsdpNgSARejectImportPolicy indicates number of SA messages that were rejected due to import policy. |
| tmnxMsdpNgPeerTable | 1.3.6.1.4.1.6527.3.1.2.104.3 | not-accessible | The tmnxMsdpNgPeerTable table provides information on the properties of a MSDP peer. | |
| tmnxMsdpNgPeerEntry | 1.3.6.1.4.1.6527.3.1.2.104.3.1 | not-accessible | tmnxMsdpNgPeerEntry represents a row entry in tmnxMsdpNgPeerTable for a MSDP peer. Entries can be created and deleted via SNMP SET operations through tmnxMsdpNgPeerRowStatus. | |
| IPt tmnxMsdpNgPeerAddressType | 1.3.6.1.4.1.6527.3.1.2.104.3.1.1 | InetAddressType | not-accessible | The value of tmnxMsdpNgPeerAddressType indicates the type of tmnxMsdpNgPeerAddress. |
| IP tmnxMsdpNgPeerAddress | 1.3.6.1.4.1.6527.3.1.2.104.3.1.2 | InetAddress | not-accessible | The value of tmnxMsdpNgPeerAddress indicates the address of the MSDP peer. |
| ROW tmnxMsdpNgPeerRowStatus | 1.3.6.1.4.1.6527.3.1.2.104.3.1.3 | RowStatus | read-create | tmnxMsdpNgPeerRowStatus is the object used for creating and deleting row entries in this table. |
| I32 tmnxMsdpNgPeerMaxActiveSources | 1.3.6.1.4.1.6527.3.1.2.104.3.1.4 | Integer32 | read-create | The value of tmnxMsdpNgPeerMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted. |
| U32 tmnxMsdpNgPeerMsgRcvRate | 1.3.6.1.4.1.6527.3.1.2.104.3.1.5 | Unsigned32 | read-create | The value of tmnxMsdpNgPeerMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpNgPeerMsgRcvRateTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerMsgRcvRateTime seconds have elapsed. |
| U32 tmnxMsdpNgPeerMsgRcvRateTime | 1.3.6.1.4.1.6527.3.1.2.104.3.1.6 | Unsigned32 | read-create | The value of tmnxMsdpNgPeerMsgRcvRateTime specifies the time in seconds that together with tmnxMsdpNgPeerMsgRcvRate defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerMsgRcvRateTime seconds have elapsed. |
| G32 tmnxMsdpNgPeerMsgRcvRateThd | 1.3.6.1.4.1.6527.3.1.2.104.3.1.7 | Gauge32 | read-create | The value of tmnxMsdpNgPeerMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpNgPeerMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerMsgRcvRateTime seconds have elapsed. |
| OCT tmnxMsdpNgPeerAuthKey | 1.3.6.1.4.1.6527.3.1.2.104.3.1.8 | OCTET STRING | read-create | The value of tmnxMsdpNgPeerAuthKey specifies the authentication key to be used for a specific MSDP peering session. Authentication is done using the MD-5 message based digest protocol. Authentication cannot be configured globally and can be applied per peer only. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. By default, all MSDP messages are accepted and the MD5 signature option authentication key is disabled |
| T/F tmnxMsdpNgPeerAuthKeyEncrypted | 1.3.6.1.4.1.6527.3.1.2.104.3.1.9 | TruthValue | read-create | When the value of tmnxMsdpNgPeerAuthKeyEncrypted is 'true', the password specified by tmnxMsdpNgPeerAuthKey is in the encrypted form. When the value of tmnxMsdpNgPeerAuthKeyEncrypted is 'false', the password specified by tmnxMsdpNgPeerAuthKey is in plain text. tmnxMsdpNgPeerAuthKey and tmnxMsdpNgPeerAuthKeyEncrypted, which indicates whether or not the password string is encrypted, must be set together in the same SNMP request PDU or else the set request will fail with an inconsistentValue error. |
| T/F tmnxMsdpNgPeerDefaultPeer | 1.3.6.1.4.1.6527.3.1.2.104.3.1.10 | TruthValue | read-create | The value of tmnxMsdpNgPeerDefaultPeer is used to configure a peer as the default Msdp peer due to which all source-active messages from the peer will be accepted without the usual peer-reverse-path-forwarding (RPF) check. |
| TMN tmnxMsdpNgPeerAdminState | 1.3.6.1.4.1.6527.3.1.2.104.3.1.11 | TmnxAdminState | read-create | The value of tmnxMsdpNgPeerAdminState specifies the desired administrative state for a MSDP peer. When a MSDP peer is 'outOfService' the operational state of MSDP as well as the operational state of other entities under it, like peer group is also disabled. By default, the state of a MSDP peer is 'inService'. |
| TPO tmnxMsdpNgPeerExportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.12 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerExportPolicy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpNgPeerExportPolicy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerExportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.13 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerExportPolicy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerExportPolicy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerExportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.14 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerExportPolicy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerExportPolicy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerExportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.15 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerExportPolicy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerExportPolicy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerExportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.16 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerExportPolicy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerExportPolicy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerImportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.17 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerImportPolicy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpNgPeerImportPolicy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerImportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.18 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerImportPolicy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerImportPolicy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerImportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.19 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerImportPolicy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerImportPolicy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerImportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.20 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerImportPolicy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerImportPolicy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerImportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.104.3.1.21 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerImportPolicy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerImportPolicy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| IPt tmnxMsdpNgPeerLocalAddressType | 1.3.6.1.4.1.6527.3.1.2.104.3.1.22 | InetAddressType | read-create | The value of tmnxMsdpNgPeerLocalAddressType is used to configure the type of tmnxMsdpNgPeerLocalAddress. |
| IP tmnxMsdpNgPeerLocalAddress | 1.3.6.1.4.1.6527.3.1.2.104.3.1.23 | InetAddress | read-create | The value of tmnxMsdpNgPeerLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured. |
| INT tmnxMsdpNgPeerState | 1.3.6.1.4.1.6527.3.1.2.104.3.1.24 | INTEGER | read-only | The value of tmnxMsdpNgPeerState indicates the status of the connection. |
| TIM tmnxMsdpNgPeerLastUpOrDown | 1.3.6.1.4.1.6527.3.1.2.104.3.1.25 | TimeStamp | read-only | The value of tmnxMsdpNgPeerLastUpOrDown indicates the time at which the most recent peer-state change occurred. |
| C32 tmnxMsdpNgPeerConRetry | 1.3.6.1.4.1.6527.3.1.2.104.3.1.26 | Counter32 | read-only | The value of tmnxMsdpNgPeerConRetry indicates number of peer connection retry attempts. |
| U32 tmnxMsdpNgPeerStateTimer | 1.3.6.1.4.1.6527.3.1.2.104.3.1.27 | Unsigned32 | read-only | The value of tmnxMsdpNgPeerStateTimer indicates the number of seconds to wait before another message is sent to a peer. |
| U32 tmnxMsdpNgPeerTimeout | 1.3.6.1.4.1.6527.3.1.2.104.3.1.28 | Unsigned32 | read-only | The value of tmnxMsdpNgPeerTimeout indicates the number of seconds to wait for a response from the peer before declaring the peer unavailable. |
| G32 tmnxMsdpNgPeerSAAccepted | 1.3.6.1.4.1.6527.3.1.2.104.3.1.29 | Gauge32 | read-only | The value of tmnxMsdpNgPeerSAAccepted indicates the number of entries in the source-active cache accepted from the peer. |
| G32 tmnxMsdpNgPeerSARx | 1.3.6.1.4.1.6527.3.1.2.104.3.1.30 | Gauge32 | read-only | The value of tmnxMsdpNgPeerSARx indicates the number of entries in the source-active cache received by the peer. |
| TIM tmnxMsdpNgPeerLastASLimit | 1.3.6.1.4.1.6527.3.1.2.104.3.1.31 | TimeStamp | read-only | The value of tmnxMsdpNgPeerLastASLimit indicates the time that the last active source limit was triggered. |
| IPt tmnxMsdpNgPeerOperLclAddrType | 1.3.6.1.4.1.6527.3.1.2.104.3.1.32 | InetAddressType | read-only | The value of tmnxMsdpNgPeerOperLclAddrType indicates the address type of tmnxMsdpNgPeerOperLclAddr. |
| IP tmnxMsdpNgPeerOperLclAddr | 1.3.6.1.4.1.6527.3.1.2.104.3.1.33 | InetAddress | read-only | The value of tmnxMsdpNgPeerOperLclAddr indicates the operational value of the local address. |
| tmnxMsdpNgPeerGroupTable | 1.3.6.1.4.1.6527.3.1.2.104.4 | not-accessible | The tmnxMsdpNgPeerGroupTable provides a listing of all MSDP Peer Groups. | |
| tmnxMsdpNgPeerGroupEntry | 1.3.6.1.4.1.6527.3.1.2.104.4.1 | not-accessible | tmnxMsdpNgPeerGroupEntry represents a MSDP Peer Group. Entries can be created and deleted via SNMP SET operations. | |
| TNA tmnxMsdpNgPeerGroupName | 1.3.6.1.4.1.6527.3.1.2.104.4.1.1 | TNamedItem | not-accessible | The value of tmnxMsdpNgPeerGroupName indicates the peer group name. |
| ROW tmnxMsdpNgPeerGroupRowStatus | 1.3.6.1.4.1.6527.3.1.2.104.4.1.2 | RowStatus | read-create | tmnxMsdpNgPeerGroupRowStatus is the object used for creating and deleting row entries in this table. |
| U32 tmnxMsdpNgPeerGroupMsgRcvRate | 1.3.6.1.4.1.6527.3.1.2.104.4.1.3 | Unsigned32 | read-create | The value of tmnxMsdpNgPeerGroupMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpNgMsgRcvRateTime seconds By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgMsgRcvRateTime seconds have elapsed. |
| U32 tmnxMsdpNgPeerGrpMsgRcvRateTime | 1.3.6.1.4.1.6527.3.1.2.104.4.1.4 | Unsigned32 | read-create | The value of tmnxMsdpNgPeerGrpMsgRcvRateTime specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of source active messages that can be stored on the system. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGroupMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpMsgRcvRateTime seconds have elapsed. |
| G32 tmnxMsdpNgPeerGroupMsgRcvRateThd | 1.3.6.1.4.1.6527.3.1.2.104.4.1.5 | Gauge32 | read-create | The value of tmnxMsdpNgPeerGroupMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpNgPeerGroupMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGroupMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpMsgRcvRateTime seconds have elapsed. |
| TMN tmnxMsdpNgPeerGroupAdminState | 1.3.6.1.4.1.6527.3.1.2.104.4.1.6 | TmnxAdminState | read-create | The value of tmnxMsdpNgPeerGroupAdminState specifies the desired administrative state for a MSDP peer group. When tmnxMsdpNgPeerGroupAdminState is 'outOfService' the operational state of the MSDP peer group as well as the operational state of other entities under it, like other peers is also disabled. By default, the state of a MSDP peer group is 'inService'. |
| TPO tmnxMsdpNgPeerGroupExportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.7 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupExportPolicy1 specifies the export policy number 1 at peer group level. |
| TPO tmnxMsdpNgPeerGroupExportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.8 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupExportPolicy2 specifies the export policy number 2 at peer group protocol level. |
| TPO tmnxMsdpNgPeerGroupExportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.9 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupExportPolicy3 specifies the export policy number 3 at peer group protocol level. |
| TPO tmnxMsdpNgPeerGroupExportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.10 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupExportPolicy4 specifies the export policy number 4 at peer group protocol level. |
| TPO tmnxMsdpNgPeerGroupExportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.11 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupExportPolicy5 specifies the export policy number 5 at peer group protocol level. |
| TPO tmnxMsdpNgPeerGroupImportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.12 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupImportPolicy1 specifies the import policy number 1 at peer group level. |
| TPO tmnxMsdpNgPeerGroupImportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.13 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupImportPolicy2 specifies the import policy number 2 at peer group level. |
| TPO tmnxMsdpNgPeerGroupImportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.14 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupImportPolicy3 specifies the import policy number 3 at peer group level. |
| TPO tmnxMsdpNgPeerGroupImportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.15 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupImportPolicy4 specifies the import policy number 4 at peer group level. |
| TPO tmnxMsdpNgPeerGroupImportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.104.4.1.16 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGroupImportPolicy5 specifies the import policy number 5 at peer group level. |
| IPt tmnxMsdpNgPeerGroupLocalAddrType | 1.3.6.1.4.1.6527.3.1.2.104.4.1.17 | InetAddressType | read-create | The value of tmnxMsdpNgPeerGroupLocalAddrType is used to configure the type of tmnxMsdpNgPeerGroupLocalAddress. |
| IP tmnxMsdpNgPeerGroupLocalAddress | 1.3.6.1.4.1.6527.3.1.2.104.4.1.18 | InetAddress | read-create | The value of tmnxMsdpNgPeerGroupLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured. |
| INT tmnxMsdpNgPeerGroupMode | 1.3.6.1.4.1.6527.3.1.2.104.4.1.19 | INTEGER | read-create | The value of tmnxMsdpNgPeerGroupMode is used to configure groups of peers in a full mesh topology. MSDP peers can be grouped in a full-mesh topology that prevents excessive flooding of source-active messages to neighboring peers. When operating in meshed mode, source-active messages received from a mesh group member are always accepted but are not flooded to other members of the same mesh group. As a result, these source-active messages are only flooded to non-mesh group peers or members of other mesh groups. By default 'standard' (non-meshed) mode is used. |
| I32 tmnxMsdpNgPeerGroupMaxActSources | 1.3.6.1.4.1.6527.3.1.2.104.4.1.20 | Integer32 | read-create | The value of tmnxMsdpNgPeerGroupMaxActSources specifies the maximum number of source active messages that will be accepted by this MSDP peer group. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted. |
| C32 tmnxMsdpNgPeerGroupActMsgsExMax | 1.3.6.1.4.1.6527.3.1.2.104.4.1.21 | Counter32 | read-only | The value of tmnxMsdpNgPeerGroupActMsgsExMax indicates the number of source active messages received from this group that exceeded the established maximum number. |
| C32 tmnxMsdpNgPeerGrpSARejExpPolicy | 1.3.6.1.4.1.6527.3.1.2.104.4.1.22 | Counter32 | read-only | The value of tmnxMsdpNgPeerGrpSARejExpPolicy indicates the number of source active messages received from this group that were were not sent due to export policy. |
| C32 tmnxMsdpNgPeerGrpSARejImpPolicy | 1.3.6.1.4.1.6527.3.1.2.104.4.1.23 | Counter32 | read-only | The value of tmnxMsdpNgPeerGrpSARejImpPolicy indicates the number of source active messages received from this group that were rejected due to import policy. |
| tmnxMsdpNgPeerGrpPeerTable | 1.3.6.1.4.1.6527.3.1.2.104.5 | not-accessible | The tmnxMsdpNgPeerGrpPeerTable table provides a listing of all peers under MSDP Peer Groups. | |
| tmnxMsdpNgPeerGrpPeerEntry | 1.3.6.1.4.1.6527.3.1.2.104.5.1 | not-accessible | An entry representing a peer in an MSDP Peer Group. Entries can be created and deleted via SNMP SET operations. | |
| IPt tmnxMsdpNgPeerGrpPeerAddressType | 1.3.6.1.4.1.6527.3.1.2.104.5.1.1 | InetAddressType | not-accessible | The value of tmnxMsdpNgPeerGrpPeerAddressType indicates the type of address of the MSDP peer. |
| IP tmnxMsdpNgPeerGrpPeerAddress | 1.3.6.1.4.1.6527.3.1.2.104.5.1.2 | InetAddress | not-accessible | The value of tmnxMsdpNgPeerGrpPeerAddress indicates the address of the MSDP peer. |
| ROW tmnxMsdpNgPeerGrpPeerRowStatus | 1.3.6.1.4.1.6527.3.1.2.104.5.1.3 | RowStatus | read-create | tmnxMsdpNgPeerGrpPeerRowStatus is the object used for creating and deleting row entries in this table. |
| I32 tmnxMsdpNgPeerGrpPeerMaxActSrcs | 1.3.6.1.4.1.6527.3.1.2.104.5.1.4 | Integer32 | read-create | The value of tmnxMsdpNgPeerGrpPeerMaxActSrcs specifies the maximum number of source active messages that will be accepted by MSDP peer group peer. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted. |
| U32 tmnxMsdpNgPeerGrpPeerMsgRcvRt | 1.3.6.1.4.1.6527.3.1.2.104.5.1.5 | Unsigned32 | read-create | The value of tmnxMsdpNgPeerGrpPeerMsgRcvRt specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpNgPeerGrpPeerMsgRxRtTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpPeerMsgRxRtTime seconds have elapsed. |
| U32 tmnxMsdpNgPeerGrpPeerMsgRxRtTime | 1.3.6.1.4.1.6527.3.1.2.104.5.1.6 | Unsigned32 | read-create | The value of tmnxMsdpNgPeerGrpPeerMsgRxRtTime specifies the time in seconds that together with tmnxMsdpNgPeerGrpPeerMsgRcvRt defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpPeerMsgRxRtTime seconds have elapsed. |
| G32 tmnxMsdpNgPeerGrpPeerMsgRcvRtThd | 1.3.6.1.4.1.6527.3.1.2.104.5.1.7 | Gauge32 | read-create | The value of tmnxMsdpNgPeerGrpPeerMsgRcvRtThd specifies the number of MSDP messages that can be processed before tmnxMsdpNgPeerGrpPeerMsgRcvRt is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpPeerMsgRxRtTime seconds have elapsed. |
| OCT tmnxMsdpNgPeerGrpPeerAuthKey | 1.3.6.1.4.1.6527.3.1.2.104.5.1.8 | OCTET STRING | read-create | The value of tmnxMsdpNgPeerGrpPeerAuthKey specifies the authentication key to be used for a specific MSDP peer group peering session. Authentication is done using the MD-5 message based digest protocol. Authentication cannot be configured globally and can be applied per peer only. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. By default all MSDP messages are accepted and the MD5 signature option authentication key is disabled |
| T/F tmnxMsdpNgPeerGrpPeerAKeyEncrypt | 1.3.6.1.4.1.6527.3.1.2.104.5.1.9 | TruthValue | read-create | When the value of tmnxMsdpNgPeerGrpPeerAKeyEncrypt is 'true', the password specified by tmnxMsdpNgPeerGrpPeerAuthKey is in the encrypted form. When the value of tmnxMsdpNgPeerGrpPeerAKeyEncrypt is 'false', the password specified by tmnxMsdpNgPeerGrpPeerAuthKey is in plain text. tmnxMsdpNgPeerGrpPeerAuthKey and tmnxMsdpNgPeerGrpPeerAKeyEncrypt, which indicates whether or not the password string is encrypted, must be set together in the same SNMP request PDU or else the set request will fail with an inconsistentValue error. |
| T/F tmnxMsdpNgPeerGrpPeerDefaultPeer | 1.3.6.1.4.1.6527.3.1.2.104.5.1.10 | TruthValue | read-create | The value of tmnxMsdpNgPeerGrpPeerDefaultPeer is used to configure a peer as the default MSDP peer due to which all source-active messages from the peer will be accepted without the usual peer-reverse-path-forwarding (RPF) check. |
| TMN tmnxMsdpNgPeerGrpPeerAdminState | 1.3.6.1.4.1.6527.3.1.2.104.5.1.11 | TmnxAdminState | read-create | The value of tmnxMsdpNgPeerGrpPeerAdminState specifies the desired administrative state for a peer under a MSDP peer group. When tmnxMsdpNgPeerGrpPeerAdminState is 'outOfService' the operational state of the MSDP peer is disabled. By default, tmnxMsdpNgPeerGrpPeerAdminState is 'inService'. |
| TPO tmnxMsdpNgPeerGrpPeerExportPlcy1 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.12 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerExportPlcy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpNgPeerGrpPeerExportPlcy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerExportPlcy2 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.13 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerExportPlcy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerExportPlcy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerExportPlcy3 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.14 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerExportPlcy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerExportPlcy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerExportPlcy4 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.15 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerExportPlcy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerExportPlcy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerExportPlcy5 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.16 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerExportPlcy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerExportPlcy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerImportPlcy1 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.17 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerImportPlcy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpNgPeerGrpPeerImportPlcy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerImportPlcy2 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.18 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerImportPlcy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerImportPlcy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerImportPlcy3 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.19 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerImportPlcy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerImportPlcy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerImportPlcy4 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.20 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerImportPlcy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerImportPlcy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| TPO tmnxMsdpNgPeerGrpPeerImportPlcy5 | 1.3.6.1.4.1.6527.3.1.2.104.5.1.21 | TPolicyStatementNameOrEmpty | read-create | The value of tmnxMsdpNgPeerGrpPeerImportPlcy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerImportPlcy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced. |
| IPt tmnxMsdpNgPeerGrpPeerLocAddrType | 1.3.6.1.4.1.6527.3.1.2.104.5.1.22 | InetAddressType | read-create | The value of tmnxMsdpNgPeerGrpPeerLocAddrType specifies the type of tmnxMsdpNgPeerGrpPeerLocalAddr. |
| IP tmnxMsdpNgPeerGrpPeerLocalAddr | 1.3.6.1.4.1.6527.3.1.2.104.5.1.23 | InetAddress | read-create | The value of tmnxMsdpNgPeerGrpPeerLocalAddr is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured. |
| INT tmnxMsdpNgPeerGrpPeerState | 1.3.6.1.4.1.6527.3.1.2.104.5.1.24 | INTEGER | read-only | The value of tmnxMsdpNgPeerGrpPeerState indicates the status of the connection. |
| TIM tmnxMsdpNgPeerGrpPeerLstUpOrDwn | 1.3.6.1.4.1.6527.3.1.2.104.5.1.25 | TimeStamp | read-only | The value of tmnxMsdpNgPeerGrpPeerLstUpOrDwn indicates the time at which the most recent peer-state change occurred. |
| C32 tmnxMsdpNgPeerGrpPeerConRetry | 1.3.6.1.4.1.6527.3.1.2.104.5.1.26 | Counter32 | read-only | The value of tmnxMsdpNgPeerGrpPeerConRetry indicates number of peer connection retry attempts. |
| U32 tmnxMsdpNgPeerGrpPeerStateTimer | 1.3.6.1.4.1.6527.3.1.2.104.5.1.27 | Unsigned32 | read-only | The value of tmnxMsdpNgPeerGrpPeerStateTimer indicates the number of seconds to wait before another message is sent to a peer. |
| U32 tmnxMsdpNgPeerGrpPeerTimeout | 1.3.6.1.4.1.6527.3.1.2.104.5.1.28 | Unsigned32 | read-only | The value of tmnxMsdpNgPeerGrpPeerTimeout indicates the number of seconds to wait for a response from the peer before declaring the peer unavailable. |
| G32 tmnxMsdpNgPeerGrpPeerSAAccepted | 1.3.6.1.4.1.6527.3.1.2.104.5.1.29 | Gauge32 | read-only | The value of tmnxMsdpNgPeerGrpPeerSAAccepted indicates the number of entries in the source-active cache accepted from the peer. |
| G32 tmnxMsdpNgPeerGrpPeerSARx | 1.3.6.1.4.1.6527.3.1.2.104.5.1.30 | Gauge32 | read-only | The value of tmnxMsdpNgPeerGrpPeerSARx indicates the number of entries in the source-active cache received by the peer. |
| TIM tmnxMsdpNgPeerGrpPeerLastASLimit | 1.3.6.1.4.1.6527.3.1.2.104.5.1.31 | TimeStamp | read-only | The value of tmnxMsdpNgPeerGrpPeerLastASLimit indicates the time that the last active source limit was triggered. |
| IPt tmnxMsdpNgPeerGrpPeerOpAddrType | 1.3.6.1.4.1.6527.3.1.2.104.5.1.32 | InetAddressType | read-only | The value of tmnxMsdpNgPeerGrpPeerOpAddrType indicates the type of tmnxMsdpNgPeerGrpPeerOpAddr. |
| IP tmnxMsdpNgPeerGrpPeerOpAddr | 1.3.6.1.4.1.6527.3.1.2.104.5.1.33 | InetAddress | read-only | The value of tmnxMsdpNgPeerGrpPeerOpAddr indicates the operational value of the local end of a MSDP session. |
| tmnxMsdpNgSourceTable | 1.3.6.1.4.1.6527.3.1.2.104.6 | not-accessible | The tmnxMsdpNgSourceTable provides a listing of all MSDP Source configuration. | |
| tmnxMsdpNgSourceEntry | 1.3.6.1.4.1.6527.3.1.2.104.6.1 | not-accessible | An tmnxMsdpNgSourceEntry represents a MSDP Source configuration. Entries can be created and deleted via SNMP SET operations. | |
| IPt tmnxMsdpNgSourcePrefixType | 1.3.6.1.4.1.6527.3.1.2.104.6.1.1 | InetAddressType | not-accessible | The value of tmnxMsdpNgSourcePrefixType indicates the type of tmnxMsdpNgSourcePrefix. |
| IP tmnxMsdpNgSourcePrefix | 1.3.6.1.4.1.6527.3.1.2.104.6.1.2 | InetAddress | not-accessible | The value of tmnxMsdpNgSourcePrefix indicates the IP address of the sources from which the source active messages would be accepted. |
| ADR tmnxMsdpNgSourceMask | 1.3.6.1.4.1.6527.3.1.2.104.6.1.3 | InetAddressPrefixLength | not-accessible | The value of tmnxMsdpNgSourceMask indicates the mask to be used along with tmnxMsdpNgSourcePrefix to obtain the range of addresses from which the router can accept source active messages. |
| ROW tmnxMsdpNgSourceRowStatus | 1.3.6.1.4.1.6527.3.1.2.104.6.1.4 | RowStatus | read-create | tmnxMsdpNgSourceRowStatus is the object used for creating and deleting row entries in this table. |
| I32 tmnxMsdpNgSourceMaxActiveSources | 1.3.6.1.4.1.6527.3.1.2.104.6.1.5 | Integer32 | read-create | The value of tmnxMsdpNgSourceMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted. |
| INT tmnxMsdpNgSourceDiscMethod | 1.3.6.1.4.1.6527.3.1.2.104.6.1.6 | INTEGER | read-only | The value of tmnxMsdpNgSourceDiscMethod indicates the discovery method for this multicast source. If the source entry was created by an user, the value of this field is 'configured'. If the source was created dynamically, the value is 'dynamic' |
| C32 tmnxMsdpNgSourceSrcActMsgsExMax | 1.3.6.1.4.1.6527.3.1.2.104.6.1.7 | Counter32 | read-only | The value of tmnxMsdpNgSourceSrcActMsgsExMax indicates the number of source active messages received from this source that exceeded the established maximum number. |
| TIM tmnxMsdpNgSourceLastExEventTime | 1.3.6.1.4.1.6527.3.1.2.104.6.1.8 | TimeStamp | read-only | The value of tmnxMsdpNgSourceLastExEventTime indicates the time the last exceed event was triggered. |
| tmnxMsdpNgSATable | 1.3.6.1.4.1.6527.3.1.2.104.7 | not-accessible | The tmnxMsdpNgSATable table stores the MSDP Source Active(SA) advertisements currently in the MSDP speaker's cache. | |
| tmnxMsdpNgSAEntry | 1.3.6.1.4.1.6527.3.1.2.104.7.1 | not-accessible | An entry representing an MSDP SA advertisement. The INDEX to this table includes msdpSACacheOriginRP for diagnosing incorrect MSDP advertisements; normally a Source and Group pair would be unique. This is a read-only table. | |
| IPt tmnxMsdpNgSAGroupAddrType | 1.3.6.1.4.1.6527.3.1.2.104.7.1.1 | InetAddressType | not-accessible | The value of tmnxMsdpNgSAGroupAddrType indicates the address type of tmnxMsdpNgSAGroupAddr. |
| IP tmnxMsdpNgSAGroupAddr | 1.3.6.1.4.1.6527.3.1.2.104.7.1.2 | InetAddress | not-accessible | The value of tmnxMsdpNgSAGroupAddr indicates the group address of the Source Active entry. |
| IPt tmnxMsdpNgSASourceAddrType | 1.3.6.1.4.1.6527.3.1.2.104.7.1.3 | InetAddressType | not-accessible | The value of tmnxMsdpNgSASourceAddrType indicates the address type of tmnxMsdpNgSASourceAddr. |
| IP tmnxMsdpNgSASourceAddr | 1.3.6.1.4.1.6527.3.1.2.104.7.1.4 | InetAddress | not-accessible | The value of tmnxMsdpNgSASourceAddr indicates the source address of the Source Active entry. |
| IPt tmnxMsdpNgSAOriginRPType | 1.3.6.1.4.1.6527.3.1.2.104.7.1.5 | InetAddressType | not-accessible | The value of tmnxMsdpNgSAOriginRPType indicates the address type of tmnxMsdpNgSAOriginRP. |
| IP tmnxMsdpNgSAOriginRP | 1.3.6.1.4.1.6527.3.1.2.104.7.1.6 | InetAddress | not-accessible | The value of tmnxMsdpNgSAOriginRP indicates the origin RP address of the Source Active entry. |
| IPt tmnxMsdpNgSAPrLearnFrType | 1.3.6.1.4.1.6527.3.1.2.104.7.1.7 | InetAddressType | read-only | The value of tmnxMsdpNgSAPrLearnFrType indicates the address type of tmnxMsdpNgSAPeerLearntFrom. |
| IP tmnxMsdpNgSAPeerLearntFrom | 1.3.6.1.4.1.6527.3.1.2.104.7.1.8 | InetAddress | read-only | The value of tmnxMsdpNgSAPeerLearntFrom indicates the peer from which this Source Active entry was last accepted. |
| IPt tmnxMsdpNgSARPFPeerType | 1.3.6.1.4.1.6527.3.1.2.104.7.1.9 | InetAddressType | read-only | The value of tmnxMsdpNgSARPFPeerType indicates the address type of tmnxMsdpNgSARPFPeer. |
| IP tmnxMsdpNgSARPFPeer | 1.3.6.1.4.1.6527.3.1.2.104.7.1.10 | InetAddress | read-only | The value of tmnxMsdpNgSARPFPeer indicates the peer from which an SA message corresponding to this cache entry would be accepted (i.e. the RPF peer for tmnxMsdpNgSAOriginRP). This may be different than tmnxMsdpNgSAPeerLearntFrom if this entry was created by an MSDP SA-Response. |
| NUM tmnxMsdpNgSAUpTime | 1.3.6.1.4.1.6527.3.1.2.104.7.1.11 | TimeInterval | read-only | The value of tmnxMsdpNgSAUpTime indicates the time since this entry was first placed in the Source Active (SA) cache. It is the difference between the time that the entry was first placed in the SA cache and the current time. |
| NUM tmnxMsdpNgSAExpiryTime | 1.3.6.1.4.1.6527.3.1.2.104.7.1.12 | TimeInterval | read-only | The value of tmnxMsdpNgSAExpiryTime indicates the time remaining before this entry will expire from the Source Active (SA) cache. It is difference between the current time and the time that the entry will expire. |
| tmnxMsdpNgPeerStatsTable | 1.3.6.1.4.1.6527.3.1.2.104.8 | not-accessible | The table tmnxMsdpNgPeerStatsTable is the statistics information related to a MSDP peer. | |
| tmnxMsdpNgPeerStatsEntry | 1.3.6.1.4.1.6527.3.1.2.104.8.1 | not-accessible | tmnxMsdpNgPeerStatsEntry is an entry (conceptual row) in the tmnxMsdpNgPeerStatsTable. Each entry represents a MSDP peer related statistics information. | |
| C32 tmnxMsdpNgPeerStatsActSrcLimExcd | 1.3.6.1.4.1.6527.3.1.2.104.8.1.1 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsActSrcLimExcd indicates the number of times the global active source limit has been exceeded by this peer instance. |
| NUM tmnxMsdpNgPeerStatsLastStChange | 1.3.6.1.4.1.6527.3.1.2.104.8.1.2 | TimeInterval | read-only | The value of tmnxMsdpNgPeerStatsLastStChange indicates how long ago the peer state changed. |
| NUM tmnxMsdpNgPeerStatsLastMsgPeer | 1.3.6.1.4.1.6527.3.1.2.104.8.1.3 | TimeInterval | read-only | The value of tmnxMsdpNgPeerStatsLastMsgPeer indicates how long ago the last message was received from this peer instance. |
| C32 tmnxMsdpNgPeerStatsRPFFailures | 1.3.6.1.4.1.6527.3.1.2.104.8.1.4 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsRPFFailures indicates number of reverse path forwarding (RPF) failures. |
| C32 tmnxMsdpNgPeerStatsRemoteCloses | 1.3.6.1.4.1.6527.3.1.2.104.8.1.5 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsRemoteCloses indicates the number of times the remote peer closed. |
| C32 tmnxMsdpNgPeerStatsPeerTimeouts | 1.3.6.1.4.1.6527.3.1.2.104.8.1.6 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsPeerTimeouts indicates the number of peer timeouts. |
| C32 tmnxMsdpNgPeerStatsSAMsgsSent | 1.3.6.1.4.1.6527.3.1.2.104.8.1.7 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsSAMsgsSent indicates the number of source-active messages sent. |
| C32 tmnxMsdpNgPeerStatsSAMsgsRx | 1.3.6.1.4.1.6527.3.1.2.104.8.1.8 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsSAMsgsRx indicates the number of source-active messages received. |
| C32 tmnxMsdpNgPeerStatsSAReqMsgsSent | 1.3.6.1.4.1.6527.3.1.2.104.8.1.9 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsSAReqMsgsSent indicates the number of source-active request messages sent. |
| C32 tmnxMsdpNgPeerStatsSAReqMsgsRx | 1.3.6.1.4.1.6527.3.1.2.104.8.1.10 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsSAReqMsgsRx indicates the number of source-active request messages received. |
| C32 tmnxMsdpNgPeerStatsSAResMsgsSent | 1.3.6.1.4.1.6527.3.1.2.104.8.1.11 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsSAResMsgsSent indicates the number of source-active response messages sent. |
| C32 tmnxMsdpNgPeerStatsSAResMsgsRx | 1.3.6.1.4.1.6527.3.1.2.104.8.1.12 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsSAResMsgsRx indicates the number of source-active response messages received. |
| C32 tmnxMsdpNgPeerStatsKAMsgsSent | 1.3.6.1.4.1.6527.3.1.2.104.8.1.13 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsKAMsgsSent indicates the number of keep-alive messages sent. |
| C32 tmnxMsdpNgPeerStatsKAMsgsRx | 1.3.6.1.4.1.6527.3.1.2.104.8.1.14 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsKAMsgsRx indicates the number of keep-alive messages received. |
| C32 tmnxMsdpNgPeerStatsUnknMsgsRx | 1.3.6.1.4.1.6527.3.1.2.104.8.1.15 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsUnknMsgsRx indicates the number of unknown messages received. |
| C32 tmnxMsdpNgPeerStatsErrMsgsRx | 1.3.6.1.4.1.6527.3.1.2.104.8.1.16 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsErrMsgsRx indicates number of error messages received. |
| G32 tmnxMsdpNgPeerStatsSALearnt | 1.3.6.1.4.1.6527.3.1.2.104.8.1.17 | Gauge32 | read-only | The value of tmnxMsdpNgPeerStatsSALearnt indicates the number of unique source active entries in the cache learned from the peer. |
| C32 tmnxMsdpNgPeerStatsSARejExpPlcy | 1.3.6.1.4.1.6527.3.1.2.104.8.1.18 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsSARejExpPlcy indicates the number of source active messages from the peer that were not sent due to export policy. |
| C32 tmnxMsdpNgPeerStatsSARejImpPlcy | 1.3.6.1.4.1.6527.3.1.2.104.8.1.19 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsSARejImpPlcy indicates the number of source active messages from the peer that were rejected due to import policy. |
| C32 tmnxMsdpNgPeerStatsResvMsgsRx | 1.3.6.1.4.1.6527.3.1.2.104.8.1.20 | Counter32 | read-only | The value of tmnxMsdpNgPeerStatsResvMsgsRx indicates the number of MSDP messages received with type 'Reserved'. |
| tmnxMsdpNgSrcActRejTable | 1.3.6.1.4.1.6527.3.1.2.104.9 | not-accessible | The tmnxMsdpNgSrcActRejTable table stores the MSDP Source Active(SA) advertisements rejected from the MSDP speaker's cache. | |
| tmnxMsdpNgSrcActRejEntry | 1.3.6.1.4.1.6527.3.1.2.104.9.1 | not-accessible | An entry representing an MSDP SA advertisement that is rejected. This is a read-only table. | |
| TNA tmnxMsdpNgSARejPeerGroupName | 1.3.6.1.4.1.6527.3.1.2.104.9.1.1 | TNamedItemOrEmpty | not-accessible | The value of tmnxMsdpNgSARejPeerGroupName indicates the peer group name of the Source Active entry that is rejected. |
| IPt tmnxMsdpNgSARejGroupAddrType | 1.3.6.1.4.1.6527.3.1.2.104.9.1.2 | InetAddressType | not-accessible | The value of tmnxMsdpNgSARejGroupAddrType indicates the address type of tmnxMsdpNgSARejGroupAddr. |
| IP tmnxMsdpNgSARejGroupAddr | 1.3.6.1.4.1.6527.3.1.2.104.9.1.3 | InetAddress | not-accessible | The value of tmnxMsdpNgSARejGroupAddr indicates the group address of the Source Active entry that is rejected. |
| IPt tmnxMsdpNgSARejSourceAddrType | 1.3.6.1.4.1.6527.3.1.2.104.9.1.4 | InetAddressType | not-accessible | The value of tmnxMsdpNgSARejSourceAddrType indicates the address type of tmnxMsdpNgSARejSourceAddr. |
| IP tmnxMsdpNgSARejSourceAddr | 1.3.6.1.4.1.6527.3.1.2.104.9.1.5 | InetAddress | not-accessible | The value of tmnxMsdpNgSARejSourceAddr indicates the source address of the Source Active entry that is rejected. |
| IPt tmnxMsdpNgSARejOriginRPType | 1.3.6.1.4.1.6527.3.1.2.104.9.1.6 | InetAddressType | not-accessible | The value of tmnxMsdpNgSARejOriginRPType indicates the address type of tmnxMsdpNgSARejOriginRP. |
| IP tmnxMsdpNgSARejOriginRP | 1.3.6.1.4.1.6527.3.1.2.104.9.1.7 | InetAddress | not-accessible | The value of tmnxMsdpNgSARejOriginRP indicates the origin rendezvous point (RP) address of the Source Active entry that is rejected. |
| IPt tmnxMsdpNgSARejPeerAddrType | 1.3.6.1.4.1.6527.3.1.2.104.9.1.8 | InetAddressType | not-accessible | The value of tmnxMsdpNgSARejPeerAddrType indicates the address type of tmnxMsdpNgSARejPeerAddr. |
| IP tmnxMsdpNgSARejPeerAddr | 1.3.6.1.4.1.6527.3.1.2.104.9.1.9 | InetAddress | not-accessible | The value of tmnxMsdpNgSARejPeerAddr indicates the peer from which this rejected Source Active entry was last received. |
| INT tmnxMsdpNgSARejFailureReason | 1.3.6.1.4.1.6527.3.1.2.104.9.1.10 | INTEGER | read-only | The value of tmnxMsdpNgSARejFailureReason indicates the reason why this Source Active entry is rejected. |
| tmnxMsdpNgNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.104 | |||
| tmnxMsdpNgNotifications | 1.3.6.1.4.1.6527.3.1.3.104.0 | |||
| NTF tmnxMsdpNgActSrcLimExcd | 1.3.6.1.4.1.6527.3.1.3.104.0.1 | The tmnxMsdpNgActSrcLimExcd event is generated whenever the global active source limit has been exceeded. | ||
| NTF tmnxMsdpNgPeerActSrcLimExcd | 1.3.6.1.4.1.6527.3.1.3.104.0.2 | The tmnxMsdpNgPeerActSrcLimExcd event is generated whenever the active source limit has been exceeded for the peer. | ||
| NTF tmnxMsdpNgRPFFailure | 1.3.6.1.4.1.6527.3.1.3.104.0.3 | The tmnxMsdpNgRPFFailure event is generated whenever a RPF(Reverse Path Forwarding) failure occurs for a source configured by user. | ||
| NTF tmnxMsdpNgSourceSrcActMsgsExcd | 1.3.6.1.4.1.6527.3.1.3.104.0.4 | The tmnxMsdpNgSourceSrcActMsgsExcd event is generated when the source active messages received from this source has exceeded the established maximum number. | ||
| NTF tmnxMsdpNgGroupSrcActMsgsExcd | 1.3.6.1.4.1.6527.3.1.3.104.0.5 | The tmnxMsdpNgGroupSrcActMsgsExcd event is generated when the source active messages received from this group has exceeded the established maximum number. |
RFC description
Multicast Source Discovery Protocol (MSDP) management for Nokia SROS routers, enabling multicast routing domain connectivity.
Start monitoring Nokia/Alcatel-Lucent 7750 SR / 7950 XRS SROS router (MSDP peer admin state/message-rate status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.