| OID symbolic | OID numeric | Type | Access | Description |
|---|
| rtpAlarmMgmtModule | 1.3.6.1.4.1.4329.2.1.2.2 | | | The MIB module describes the Managed Objects of
the Alarm Management of the Resilient Telco Platform (RTP)
$Header: c:\cvsroot/mib_base/siemens/HiPath8000_Mibs_2008/RtpAdmAlarmMgmt.mib,v 1.1 2008/11/13 21:06:27 qiaxi01 Exp $ |
| rtpAlarmMgmt | 1.3.6.1.4.1.4329.2.1.2.2.1 | | | The Alarm Management Functionality. |
| rtpArmAlarmObjectTable | 1.3.6.1.4.1.4329.2.1.2.2.1.1 | | not-accessible | A list of Alarm Objects. The conceptual rows in this table
can be read and modified. |
| rtpArmAlarmObjectEntry | 1.3.6.1.4.1.4329.2.1.2.2.1.1.1 | | not-accessible | An Alarm Object entry. |
| ALA rtpArmAlarmObjectType | 1.3.6.1.4.1.4329.2.1.2.2.1.1.1.1 | AlarmType | read-only | The type of the Alarm Object. |
| INT rtpArmAlarmObjectStatus | 1.3.6.1.4.1.4329.2.1.2.2.1.1.1.2 | INTEGER | read-only | the current state of the Alarm Object |
| INT rtpArmAlarmObjectAction | 1.3.6.1.4.1.4329.2.1.2.2.1.1.1.3 | INTEGER | read-write | Get requests will always return 'nothing'.
Setting this object to 'clear' clears the indexed alarm object
by removing all related alarms; the related conceptual rows in
'rtpArmAlarmTable' are removed.
Setting this object to 'nothing' has no effect. |
| rtpArmAlarmTable | 1.3.6.1.4.1.4329.2.1.2.2.1.2 | | not-accessible | A list of active Alarms. The conceptual rows in this table
can be read and deleted.
Active alarms will return with their current Id
(rtpArmAlarmId). You will get further information about this
alarm using the event table (see rtpEvtTable). |
| rtpArmAlarmEntry | 1.3.6.1.4.1.4329.2.1.2.2.1.2.1 | | not-accessible | An Alarm entry. |
| ALA rtpArmAlarmType | 1.3.6.1.4.1.4329.2.1.2.2.1.2.1.1 | AlarmType | read-only | The alarm type of an active alarm or 0. |
| TIM rtpArmAlarmTime | 1.3.6.1.4.1.4329.2.1.2.2.1.2.1.2 | TimeStampSeconds | read-only | The time when the alarm occured, in seconds
since 01.Jan.1970 00:00:00h UTC. This is the event time
used in rtpEvtEventTime. |
| U32 rtpArmAlarmId | 1.3.6.1.4.1.4329.2.1.2.2.1.2.1.3 | Unsigned32 | read-only | The current Id (logId) of an active alarm. This is the log
record Id in the database used in rtpEvtCurrId. |
| INT rtpArmAlarmAction | 1.3.6.1.4.1.4329.2.1.2.2.1.2.1.4 | INTEGER | read-write | Get requests will always return 'nothing'.
Setting this object to one of the specified actions has the
following effects:
deleteSingle: Deletes a single entry selected by its
current Id (rtpArmAlarmId) from the
alarm table. rtpArmAlarmType and
rtpArmAlarmTime should be set to zero
or to valid values (i.e. an existing OID).
deleteBeforeId: Deletes all entries within the specified
alarm type from the top of the alarm table
to the set current Id (rtpArmAlarmId)
from the alarm table.
rtpArmAlarmTime should be set to zero
or to a valid value (i.e. an existing OID).
deleteBeforeTime: Deletes all entries within the specified
alarm type from the top of the alarm table
to the set alarm time (rtpArmAlarmTime)
from the alarm table.
rtpArmAlarmId must be set to a valid value
(i.e. an existing OID).
Setting this object to 'nothing' has no effect. |
| NTF rtpArmCorrIdTrap | 1.3.6.1.4.1.4329.2.1.2.2.1.3 | | | This notification (trap) mainly contains the Current ID of a Clear
event ('rtpEvtCurrId') and the list of Correlated IDs, i.e. those
alarm IDs which have been cleared by the Clear event ('rtpArmCiCorrIDs').
The list of Correlated IDs may be empty. It may also be too long to
fit into a single SNMP PDU (= Protocol Data Unit). For the latter
reason, it may be necessary to send more than one trap for the same
Clear event in order to provide all Correlated IDs. There are objects
in the trap controlling the sending of multiple parts of the
Correlated ID list ('rtpArmCiMultipartNum', 'rtpArmCiAmountOfParts').
Note: since there is no filtering for 'rtpArmCorrIdTrap' traps, all
recipients (configured either in 'rtpEvtFilterTable' - see the event
management mib file: RtpAdmEventMgmt.my - or at the EMANATE Master
Agent) will receive the same(!) value in 'rtpArmCiLastTransId',
respectively! |
| U32 rtpArmCiLastTransId | 1.3.6.1.4.1.4329.2.1.2.2.1.4 | Unsigned32 | read-only | Transmission identifier used for the last sent trap.
This value will be incremented every time before sending a
'rtpArmCorrIdTrap' trap to a management station which has
defined an event filter (see rtpEvtFilterTable in the
event management mib file: RtpAdmEventMgmt.my!).
It is also incremented for each 'multipart trap' (see
rtpArmCiMultipartNum) in case the list of correlated IDs (see
rtpArmCiCorrIDs) spreads over multiple traps.
A management station which has defined an event filter can
detect the loss of 'clear' events when subsequently received
'rtpArmCorrIdTrap' traps do not have subsequent transmission
identifiers (i.e. transId2 - transId1 > 1).
A management station should poll this object to detect the
loss of 'rtpArmCorrIdTrap' traps.
Warning: this is a non-persistent value. Each time the agent
restarts, its value is 0 until the 1st 'rtpArmCorrIdTrap' trap
with the transmission id of 1 is sent. |
| I32 rtpArmCiMultipartNum | 1.3.6.1.4.1.4329.2.1.2.2.1.5 | Integer32 | read-only | This is the sequence number of the trap if multiple
'rtpArmCorrIdTrap' traps are sent to transfer the complete list
of correlated IDs for 'rtpEvtCurrId' (see rtpArmCorrIdTrap!).
The first part of a so called 'multipart trap' has the value 1.
If the list fits into a single trap (see rtpArmCiCorrIDs - octet
string), this value is also 1.
A GET request on this object always returns 0. |
| I32 rtpArmCiAmountOfParts | 1.3.6.1.4.1.4329.2.1.2.2.1.6 | Integer32 | read-only | This object represents the amount of 'multipart traps' needed to
transfer the complete list of correlated IDs for 'rtpEvtCurrId'.
If the list fits into a single trap, this value is 1.
(see rtpArmCorrIdTrap!)
A GET request on this object always returns 0. |
| I32 rtpArmCiAmountOfCorrIDs | 1.3.6.1.4.1.4329.2.1.2.2.1.7 | Integer32 | read-only | The amount of correlated IDs cleared by 'rtpEvtCurrId' (see
rtpArmCorrIdTrap!).
Note: if multiple traps are needed to transfer the complete list
of correlated IDs, this value indicates the amount of correlated
IDs across all 'multipart traps'.
A GET request on this object always returns 0. |
| OCT rtpArmCiCorrIDs | 1.3.6.1.4.1.4329.2.1.2.2.1.8 | OCTET STRING | read-only | This value is the ascii representation of a list of correlated IDs
separated by colons. (e.g. 10000:10010:10020:10030)
In case of 'multipart traps' it represents only a part of the
whole list at one time. In case the list of correlated IDs is
empty, the octet string has a length of 0.
A GET request on this object always returns an empty octet string
with a length of 0. |
