TIMETRA-ETH-TUNNEL-MIB

All MIBs › TIMETRA-ETH-TUNNEL-MIB

Organization: Alcatel-Lucent

Last Updated: 2009-02-28

Description: TIMETRA-ETH-TUNNEL-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-ETH-TUNNEL-MIB?

TIMETRA-ETH-TUNNEL-MIB is an Alcatel-Lucent (Nokia) MIB for the SROS operating system used on their service router platforms, defining management objects for Ethernet Tunnel components -- a link-aggregation-like construct that bundles multiple member ports/LAGs into a protected Ethernet tunnel with configurable protection switching behavior. It exposes both configuration data (tunnel protection type, hold-down/hold-up timers for members, revert time, row status) and operational state through a separate operational table reflecting the tunnel's actual runtime status. Its monitoring value lies in tracking the software/protocol status of the tunnel's protection-switching state machine -- confirming whether the primary or protection path is currently active and whether a member is flapping due to hold-timer misconfiguration -- important for services relying on sub-second Ethernet resiliency. It is deployed as part of the broader TIMETRA/SROS MIB family and depends on Alcatel-Lucent's own indexing conventions for physical/logical port members rather than IETF LAG standards directly. It is typically used in carrier and enterprise networks running Alcatel-Lucent 7750/7450-class service routers for Ethernet transport resiliency. Network engineers evaluating or troubleshooting this functionality can download the TIMETRA-ETH-TUNNEL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-ETH-TUNNEL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent (Nokia) 7750/7450-series SROS service routers

Monitoring Examples

An administrator would poll tmnxEthTunnelConfigTable/tmnxEthTunnelConfigEntry for a given tmnxEthTunnelIndex to check tmnxEthTunnelProtectionType and tmnxEthTunnelRevertTime, then cross-check tmnxEthTunnelOperTable/tmnxEthTunnelOperEntry to confirm the tunnel's actual operational/active member state. A tunnel whose operational table shows the standby member active longer than expected, combined with tmnxEthTunnelHoldDownTimeMember/tmnxEthTunnelHoldUpTimeMember settings that are too aggressive, would explain repeated protection switchovers (flapping) on that tunnel.

What Can Be Monitored

Ethernet tunnel protection type
tunnel member hold-down/hold-up timers
tunnel revert time
tunnel configuration change timestamp
tunnel operational/active state

Imported Objects

From IF-MIB

InterfaceIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-CHASSIS-MIB

TmnxChassisIndex

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-SAP-MIB

sapEncapValue	OBJECT-TYPE
sapPortId	OBJECT-TYPE

From TIMETRA-SERV-MIB

svcId

OBJECT-TYPE

From TIMETRA-TC-MIB

TItemDescription
TmnxAdminState
TmnxEncapVal
TmnxOperState

How to Use in IPNetwork Monitor

Example using tmnxEthTunnelApsMemberActCount OID:

Select an Alcatel-Lucent (Nokia) 7750/7450-series SROS service router (Ethernet tunnel protection-switching status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxEthTunnelApsMemberActCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tmnxEthTunnelApsMemberActCount indicates the number of times, since system startup, that the Ethernet Tunnel Group member has been active. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraEthTunnelMIBModule	1.3.6.1.4.1.6527.1.1.3.64			This document is the SNMP MIB module to manage and provision the Ethernet Tunnel components of the Alcatel-Lucent SROS device. Copyright (c) 2009-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxEthTunnelConformance	1.3.6.1.4.1.6527.3.1.1.64
tmnxEthTunnelCompliances	1.3.6.1.4.1.6527.3.1.1.64.1
tmnxEthTunnelCompliance	1.3.6.1.4.1.6527.3.1.1.64.1.1			The compliance statement for revision 1.0 of TIMETRA-ETH-TUNNEL-MIB.
tmnxEthTunnelV8v0Compliance	1.3.6.1.4.1.6527.3.1.1.64.1.2			The compliance statement for revision 2.0 of TIMETRA-ETH-TUNNEL-MIB.
tmnxEthTunnelGroups	1.3.6.1.4.1.6527.3.1.1.64.2
tmnxEthTunnelTSGroups	1.3.6.1.4.1.6527.3.1.1.64.2.0
tmnxEthTunnelTimeStampGroup	1.3.6.1.4.1.6527.3.1.1.64.2.0.1			The group of objects that track configuration changes for the maintenance of Ethernet Tunnels for the 7x50.
tmnxEthTunnelTimeStampV8v0Group	1.3.6.1.4.1.6527.3.1.1.64.2.0.2			The group of objects that track configuration changes for the maintenance of Ethernet Tunnels for Release 8.0 of the 7x50.
tmnxEthTunnelConfigGroups	1.3.6.1.4.1.6527.3.1.1.64.2.1
tmnxEthTunnelBaseConfigGroup	1.3.6.1.4.1.6527.3.1.1.64.2.1.1			The group of objects for management of Ethernet Tunnel Group configurations for the 7x50.
tmnxEthTunnelBaseConfigV8v0Group	1.3.6.1.4.1.6527.3.1.1.64.2.1.2			The group of objects for management of Ethernet Tunnel Group configurations for Release 8.0 of the 7x50.
tmnxEthTunnelOperGroups	1.3.6.1.4.1.6527.3.1.1.64.2.2
tmnxEthTunnelBaseOperGroup	1.3.6.1.4.1.6527.3.1.1.64.2.2.1			The group of objects for management of Ethernet Tunnel Group operations for the 7x50.
tmnxEthTunnelMemberGroups	1.3.6.1.4.1.6527.3.1.1.64.2.3
tmnxEthTunnelBaseMemberGroup	1.3.6.1.4.1.6527.3.1.1.64.2.3.1			The group of objects for management of Ethernet Tunnel Group Member configurations for the 7x50.
tmnxEthTunnelAPSGroups	1.3.6.1.4.1.6527.3.1.1.64.2.4
tmnxEthTunnelBaseAPSGroup	1.3.6.1.4.1.6527.3.1.1.64.2.4.1			The group of objects for management of Ethernet Tunnel Group APS configurations for the 7x50.
tmnxEthTunnelBaseAPSV8v0Group	1.3.6.1.4.1.6527.3.1.1.64.2.4.2			The group of objects for management of Ethernet Tunnel Group APS configurations for the 7x50 in release 8.0.
tmnxEthTunnelNotifyGroups	1.3.6.1.4.1.6527.3.1.1.64.2.5
tmnxEthTunnelAPSNotifyGroup	1.3.6.1.4.1.6527.3.1.1.64.2.5.1			The group of notifications supporting the management of Ethernet Tunnel Group configuration for the 7x50.
tmnxEthTunnelSAPGroups	1.3.6.1.4.1.6527.3.1.1.64.2.6
tmnxEthTunnelSAPMemberGroup	1.3.6.1.4.1.6527.3.1.1.64.2.6.1			The group of objects added in Release 8.0 to support configuration and maintenance of Ethernet Tunnel Groups on SAPs for the 7x50.
tmnxEthTunnelLEGroups	1.3.6.1.4.1.6527.3.1.1.64.2.7
tmnxEthTunnelLEGroup	1.3.6.1.4.1.6527.3.1.1.64.2.7.1			The group of objects added in Release 8.0 to support configuration and maintenance of Ethernet Tunnel Groups for loadsharing (LAG) for the 7x50.
tmnxEthTunnelObjs	1.3.6.1.4.1.6527.3.1.2.64
tmnxEthTunnelConfigTimeStamps	1.3.6.1.4.1.6527.3.1.2.64.0
TIM tmnxEthTunnelCfgTblLastChanged	1.3.6.1.4.1.6527.3.1.2.64.0.1	TimeStamp	read-only	The tmnxEthTunnelCfgTblLastChanged indicates the time, since system startup, when a row in the tmnxEthTunnelConfigTable last changed.
TIM tmnxEthTunnelMbrTblLastChanged	1.3.6.1.4.1.6527.3.1.2.64.0.2	TimeStamp	read-only	The tmnxEthTunnelMbrTblLastChanged indicates the time, since system startup, when a row in the tmnxEthTunnelMemberTable last changed.
TIM tmnxEthTunnelLETableChanged	1.3.6.1.4.1.6527.3.1.2.64.0.3	TimeStamp	read-only	The value of tmnxEthTunnelLETableChanged indicates the time, since system startup, when a row in the tmnxEthTunnelLETable last changed.
TIM tmnxEthTunnelSAPMbrTblChanged	1.3.6.1.4.1.6527.3.1.2.64.0.4	TimeStamp	read-only	The tmnxEthTunnelSAPMbrTblChanged indicates the time, since system startup, when a row in the tmnxEthTunnelSAPMemberTable last changed.
tmnxEthTunnelConfigurations	1.3.6.1.4.1.6527.3.1.2.64.1
tmnxEthTunnelConfigTable	1.3.6.1.4.1.6527.3.1.2.64.1.1		not-accessible	The tmnxEthTunnelConfigTable consists of the Ethernet Tunnel Group configuration information.
tmnxEthTunnelConfigEntry	1.3.6.1.4.1.6527.3.1.2.64.1.1.1		not-accessible	The tmnxEthTunnelConfigEntry contains information pertaining to an individual Ethernet Tunnel Group. Rows in this table are created and destroyed using the tmnxEthTunnelRowStatus object. A corresponding row in the tmnxPortTable will exist for each row in this table, based on the tmnxEthTunnelOperEntry tmnxEthTunnelChassisIndex and tmnxEthTunnelIfIndex object pair. The tmnxPortEntry corresponding to this entry manages the administration, description, MAC address and other port related configuration.
TMN tmnxEthTunnelIndex	1.3.6.1.4.1.6527.3.1.2.64.1.1.1.1	TmnxEthTunnelIndex	not-accessible	The tmnxEthTunnelIndex specifies the row index of the Ethernet Tunnel Group.
ROW tmnxEthTunnelRowStatus	1.3.6.1.4.1.6527.3.1.2.64.1.1.1.2	RowStatus	read-create	The tmnxEthTunnelRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelConfigTable. A corresponding row in the tmnxPortTable is created by the system when a tmnxEthTunnelRowStatus value of 'createAndGo (4)' is issued on a new row in the tmnxEthTunnelConfigTable. The corresponding row in the tmnxPortTable will be destroyed by the system when the tmnxEthTunnelRowStatus value of 'destroy (6)' is issued.
TIM tmnxEthTunnelTimeStamp	1.3.6.1.4.1.6527.3.1.2.64.1.1.1.3	TimeStamp	read-only	The tmnxEthTunnelTimeStamp indicates the time, since system startup, of the last change to this row.
U32 tmnxEthTunnelHoldDownTimeMember	1.3.6.1.4.1.6527.3.1.2.64.1.1.1.4	Unsigned32	read-create	The value of tmnxEthTunnelHoldDownTimeMember specifies the time, in centiseconds, used for the hold-timer for associated Continuity Check (CC) Session down event dampening. This guards against reporting excessive member operational state transitions. This is implemented by not advertising subsequent transitions of the CC state to the Ethernet Tunnel Group until the configured timer has expired. A value of zero (0) specifies that a down transition is reported immediately.
INT tmnxEthTunnelProtectionType	1.3.6.1.4.1.6527.3.1.2.64.1.1.1.5	INTEGER	read-create	The value of tmnxEthTunnelProtectionType specifies the model used for determining which members are actively receiving and transmitting data. When the value is set to 'g8031-1to1 (1)', as per G.8031 spec, only two members are allowed, and only one of them can be active at one point in time. When the value is set to 'loadsharing (2)', multiple members can be active at one point in time. The value of tmnxEthTunnelProtectionType can only be changed when the corresponding tmnxPortEntry row object tmnxPortAdminStatus is set to 'outOfService (3)'
U32 tmnxEthTunnelRevertTime	1.3.6.1.4.1.6527.3.1.2.64.1.1.1.6	Unsigned32	read-create	The value of tmnxEthTunnelRevertTime specifies the time, in seconds, that the tunnel waits to restore the working member. A value of zero (0) sets the behavior of the Ethernet Tunnel Group to be non-revertive, while a positive value specifies the wait time. After clearing of a condition that necessitated an automatic switch, the wait to restore period, indicated by reading the tmnxEthTunnelRevertTimeCountDn object, must elapse before reverting. This is intended to avoid rapid switch oscillations. This object is only applicable when the tmnxEthTunnelProtectionType is set to 'g8031-1to1 (1)'.
U32 tmnxEthTunnelHoldUpTimeMember	1.3.6.1.4.1.6527.3.1.2.64.1.1.1.7	Unsigned32	read-create	The value of tmnxEthTunnelHoldUpTimeMember specifies the time, in deciseconds, used for the hold-timer for associated Continuity Check (CC) Session up event dampening. This guards against reporting excessive member operational state transitions. This is implemented by not advertising subsequent transitions of the CC state to the Ethernet Tunnel Group until the configured timer has expired. A value of zero (0) specifies that an up transition is reported immediately.
tmnxEthTunnelOperTable	1.3.6.1.4.1.6527.3.1.2.64.1.2		not-accessible	The tmnxEthTunnelOperTable consists of the Ethernet Tunnel Group operational information. This table augments the tmnxEthTunnelConfigTable.
tmnxEthTunnelOperEntry	1.3.6.1.4.1.6527.3.1.2.64.1.2.1		not-accessible	The tmnxEthTunnelOperEntry contains information pertaining to an individual Ethernet Tunnel Group's operational state.
TMN tmnxEthTunnelChassisIndex	1.3.6.1.4.1.6527.3.1.2.64.1.2.1.1	TmnxChassisIndex	read-only	The tmnxEthTunnelChassisIndex indicates the chassis index for the Ethernet Tunnel Group. The tmnxEthTunnelChassisIndex along with the tmnxEthTunnelIfIndex specifies the row in tmnxPortEntry that corresponds to the Ethernet Tunnel Group.
NUM tmnxEthTunnelIfIndex	1.3.6.1.4.1.6527.3.1.2.64.1.2.1.2	InterfaceIndexOrZero	read-only	The tmnxEthTunnelIfIndex indicates the tmnxPortPortID for the Ethernet Tunnel Group. The tmnxEthTunnelChassisIndex along with the tmnxEthTunnelIfIndex specifies the row in tmnxPortEntry that corresponds to the Ethernet Tunnel Group.
NUM tmnxEthTunnelMgmtMemberIfIndex	1.3.6.1.4.1.6527.3.1.2.64.1.2.1.3	InterfaceIndexOrZero	read-only	The tmnxEthTunnelMgmtMemberIfIndex indicates the tmnxEthTunnelMemberIfIndex of the Ethernet Tunnel Group member with which the Ethernet Tunnel Group port (tmnxEthTunnelIfIndex) inherits its port configurations. The management member is set to the first member added to the Ethernet Tunnel or the next higher member in the case of removing the first member from the group. If no members are configured for the group, the tmnxEthTunnelMgmtMemberIfIndex is set to zero (0).
TMN tmnxEthTunnelActiveMembers	1.3.6.1.4.1.6527.3.1.2.64.1.2.1.4	TmnxEthTunnelMemberList	read-only	The tmnxEthTunnelActiveMembers indicates which members are actively receiving and transmitting data for the Ethernet Tunnel Group.
U32 tmnxEthTunnelRevertTimeCountDn	1.3.6.1.4.1.6527.3.1.2.64.1.2.1.5	Unsigned32	read-only	The tmnxEthTunnelRevertTimeCountDn indicates the remaining time, in seconds, before the Ethernet Tunnel Group reverts back to the working member. A tmnxEthTunnelRevertTimeCountDn value of '0' indicates that the Ethernet Tunnel Group is not in a revertive wait state.
tmnxEthTunnelMemberTable	1.3.6.1.4.1.6527.3.1.2.64.1.3		not-accessible	The tmnxEthTunnelMemberTable consists of the members associated with the corresponding tmnxEthTunnelConfigEntry.
tmnxEthTunnelMemberEntry	1.3.6.1.4.1.6527.3.1.2.64.1.3.1		not-accessible	The tmnxEthTunnelMemberEntry contains information pertaining to an individual member interface associated with a tmnxEthTunnelConfigEntry. Rows in this table are created and destroyed using the tmnxEthTunnelMemberRowStatus object.
TMN tmnxEthTunnelMemberIndex	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.1	TmnxEthTunnelMemberIndex	not-accessible	The tmnxEthTunnelMemberIndex specifies the row index of the member.
ROW tmnxEthTunnelMemberRowStatus	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.2	RowStatus	read-create	The tmnxEthTunnelMemberRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelMemberTable.
TIM tmnxEthTunnelMemberTimeStamp	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.3	TimeStamp	read-only	The value of tmnxEthTunnelMemberTimeStamp indicates the time, since system startup, of the last change to this row.
NUM tmnxEthTunnelMemberIfIndex	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.4	InterfaceIndexOrZero	read-create	The value of tmnxEthTunnelMemberIfIndex specifies the member's port tmnxPortPortID associated with the tmnxEthTunnelConfigEntry. Once specified, the tmnxEthTunnelMemberIfIndex can not be changed; the row must be destroyed and re-created.
TMN tmnxEthTunnelMemberIfCtlTag	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.5	TmnxEncapVal	read-create	The value of tmnxEthTunnelMemberIfCtlTag specifies the member's encapsulation. Once specified, the tmnxEthTunnelMemberIfCtlTag can not be changed; the row must be destroyed and re-created. The default value of all ones (0xFFFFFFFF) represents an invalid, unspecified, control tag.
TIT tmnxEthTunnelMemberDescription	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.6	TItemDescription	read-create	The value of tmnxEthTunnelMemberDescription specifies a detailed description of the Ethernet Tunnel member.
TMN tmnxEthTunnelMemberAdminStatus	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.7	TmnxAdminState	read-create	The value of tmnxEthTunnelMemberAdminStatus specifies the administrative state of the member. 'outOfService (3)' specifies that the member will not partake in Tunnel Redundancy or load sharing.
TMN tmnxEthTunnelMemberOperStatus	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.8	TmnxOperState	read-only	The tmnxEthTunnelMemberOperStatus indicates the operational state of of the member. The tmnxEthTunnelMemberOperStatus supports the following two TmnxOperState values: inService (2) outOfService (3)
U32 tmnxEthTunnelMemberPrecedence	1.3.6.1.4.1.6527.3.1.2.64.1.3.1.9	Unsigned32	read-create	The value of tmnxEthTunnelMemberPrecedence specifies the precedence level of the Member. When tmnxEthTunnelProtectionType of the group is set to 'g8031-1to1 (1)', only two precedence values are valid, and each member MUST have a different precedence. 0 - This is considered the primary member, or the working member. 1 - This is considered the secondary member, or the protection member. When tmnxEthTunnelProtectionType is set to the value 'loadsharing (2)' the precedence of all members should be the same.
tmnxEthTunnelAPSConfigs	1.3.6.1.4.1.6527.3.1.2.64.1.4
tmnxEthTunnelApsTable	1.3.6.1.4.1.6527.3.1.2.64.1.4.1		not-accessible	The tmnxEthTunnelApsTable consists of APS configuration for Ethernet Tunnel Groups configured with a tmnxEthTunnelProtectionType set to 'g8031-1to1 (1)'.
tmnxEthTunnelApsEntry	1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1		not-accessible	The tmnxEthTunnelApsEntry contains APS information for an individual Ethernet Tunnel Group. Entries in the tmnxEthTunnelApsTable are created and destroyed by the system by changing the tmnxEthTunnelProtectionType object.
TMN tmnxEthTunnelApsRxPdu	1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.1	TmnxEthTunnelApsPduType	read-only	The value of tmnxEthTunnelApsRxPdu indicates the PDU last received on the Ethernet Tunnel Group.
TMN tmnxEthTunnelApsTxPdu	1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.2	TmnxEthTunnelApsPduType	read-only	The value of tmnxEthTunnelApsTxPdu indicates the PDU last transmitted on the Ethernet Tunnel Group.
BIT tmnxEthTunnelApsDefectStatus	1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.3	Bits	read-only	The value of tmnxEthTunnelApsDefectStatus indicates what defects are active on the Ethernet Tunnel Group. The Defects are defined as: dFopCM -- Configuration Mismatch dFopPM -- Provisioning Mismatch dFopNR -- Protocol No Response
TIM tmnxEthTunnelApsSwitchoverTime	1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.4	TimeStamp	read-only	The value of tmnxEthTunnelApsSwitchoverTime indicates the time that the Ethernet Tunnel Group last experienced an APS switchover.
tmnxEthTunnelApsMemberTable	1.3.6.1.4.1.6527.3.1.2.64.1.4.2		not-accessible	The tmnxEthTunnelApsMemberTable consists of Ethernet Tunnel Group members which are associated with an Ethernet Tunnel Group where the tmnxEthTunnelProtectionType is set to 'g8031-1to1 (1)'.
tmnxEthTunnelApsMemberEntry	1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1		not-accessible	The tmnxEthTunnelApsMemberEntry contains the APS information pertaining to an Ethernet Tunnel Group member. Entries in the tmnxEthTunnelApsMemberTable are created and destroyed by the system, when the Ethernet Tunnel Group object tmnxEthTunnelProtectionType is changed.
C32 tmnxEthTunnelApsMemberActCountEx	1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1.1	Counter32	read-only	The value of tmnxEthTunnelApsMemberActCount indicates the number of times, since system startup, that the Ethernet Tunnel Group member has been active.
C32 tmnxEthTunnelApsMemberActTime	1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1.2	Counter32	read-only	The value of tmnxEthTunnelApsMemberActTime indicates the accumulative time (in seconds) that the Ethernet Tunnel Group member has been active.
tmnxEthTunnelApsCommandTable	1.3.6.1.4.1.6527.3.1.2.64.1.4.3		not-accessible	The tmnxEthTunnelApsCommandTable consists of the one-shot action commands that effect state of Ethernet Tunnel APS configuration.
tmnxEthTunnelApsCommandEntry	1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1		not-accessible	The tmnxEthTunnelApsCommandEntry contains the commands available to exist on an existing Ethernet Tunnel APS Group Member. Rows in this table are created and destroyed by the system.
INT tmnxEthTunnelApsCommandSwitch	1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1.1	INTEGER	read-write	The value of tmnxEthTunnelApsCommandSwitch specifies the switch command to initiate on an Ethernet Tunnel APS Group. When read, this object returns the last command written or 'noCmd (0)' if no command has been written to this Ethernet Tunnel APS Group since initialization. The return of the last command written does not imply that this command is currently in effect. This request may be preempted by a higher priority local or remote request. In order to determine the current state of the group it is necessary to read the objects tmnxEthTunnelApsRxPdu and tmnxEthTunnelApsTxPdu. The value 'noCmd (0)' may not be used in a write command. The value 'clear (1)' clears all the switch commands listed below for the specified member. In addition, if tmnxEthTunnelRevertTime is a non-zero value (revertive mode) the active WTR (Wait To Restore) state is also cleared. The value 'lockoutOfSecondary (2)' prevents the primary (working) member from switching to the secondary (protection) member. The specified member should be the secondary member index, otherwise an inconsistentValue error is returned. The value 'forceSwitchPrimaryToSecondary (3)' switches the primary member to the secondary member. If the secondary member is specified an inconsistentValue error is returned. The value 'manualSwitchPrimaryToSecondary (4)' switches the specified primary member ot the secondary member. If the secondary member is specified an inconsistentValue error is returned. The value 'exercise (5)' exercises the protocol for a protection switch of the specified member by issuing an Exercise request for that member and checking the response on the APS member.
INT tmnxEthTunnelApsCommandExsResult	1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1.2	INTEGER	read-only	The value of tmnxEthTunnelApsCommandExsResult indicates the result of the last 'excerise (5)' command issued from the tmnxEthTunnelApsCommandSwitch object. When this object returns 'unknown (4)' no 'excersie (5)' command has been written to this Ethernet Tunnel Group Member since initialization.
tmnxEthTunnelLEConfigs	1.3.6.1.4.1.6527.3.1.2.64.1.5
tmnxEthTunnelLETable	1.3.6.1.4.1.6527.3.1.2.64.1.5.1		not-accessible	The tmnxEthTunnelLETable consists of the configuration for Ethernet Tunnel Groups that have tmnxEthTunnelProtectionType set to 'loadsharing (2)'.
tmnxEthTunnelLEEntry	1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1		not-accessible	The tmnxEthTunnelLEEntry contains the load sharing information pertaining to an Ethernet Tunnel Group. Entries in the tmnxEthTunnelLETable are created or destroyed by setting the tmnxEthTunnelProtectionType to or from 'loadsharing (2)'.
INT tmnxEthTunnelLEAccessAdaptQos	1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.1	INTEGER	read-write	The value of tmnxEthTunnelLEAccessAdaptQos specifies how the Ethernet Tunnel Group SAP queue and virtual scheduler buffering and rate parameters are adapted over multiple active MDAs. link (1) - The Ethernet Tunnel Group will create the SAP queues and virtual schedulers with the actual parameters on each MDA. distribute(2) - Each MDA will receive a fraction of the SAP and scheduler parameters.
T/F tmnxEthTunnelLEPerFpIngQueueing	1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.2	TruthValue	read-write	The value of tmnxEthTunnelLEPerFpIngQueueing specifies whether a more efficient method of queue allocation for Ethernet Tunnel Group SAPs should be utilized. An 'inconsistentValue' error is returned if this object is set to a different value when there are existing members in the Ethernet Tunnel Group.
U32 tmnxEthTunnelLEMbrThreshold	1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.3	Unsigned32	read-write	The value of tmnxEthTunnelLEMbrThreshold specifies the threshold for the Ethernet Tunnel Group. When a physical port member state changes and the number of operational physical port members is less than or equal to tmnxEthTunnelLEMbrThreshold, the Ethernet Tunnel Group is set operationally down. When the number of operational physical members become greater than tmnxEthTunnelLEMbrThreshold, the Ethernet Tunnel Group is set operationally up The value of zero specifies to bring the Ethernet Tunnel Group operationally down only when all members are operationally down, and bring the Ethernet Tunnel Group operationally up when at least one member is operationally up.
tmnxEthTunnelSAPConfigs	1.3.6.1.4.1.6527.3.1.2.64.1.6
tmnxEthTunnelSAPMemberTable	1.3.6.1.4.1.6527.3.1.2.64.1.6.1		not-accessible	The tmnxEthTunnelSAPMemberTable consists of the configuration for Ethernet Tunnel Group members associated to SAPs.
tmnxEthTunnelSAPMemberEntry	1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1		not-accessible	The tmnxEthTunnelSAPMemberEntry contains the SAP information pertaining to an Ethernet Tunnel Group member. Entries in the tmnxEthTunnelSAPMemberTable are created and destroyed by setting the tmnxEthTunnelSAPMemberRowStatus object. Entries in this table corresponding to control SAPs, those with the index sapEncapValue set to 8191 (0x1FFF), are not writable. For a data SAP that is sharing the fate of a control SAP, these entries allow the configuration of the tag values for the corresponding path in the Ethernet Tunnel port.
ROW tmnxEthTunnelSAPMemberRowStatus	1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1.1	RowStatus	read-create	The tmnxEthTunnelSAPMemberRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelSAPMemberTable.
TMN tmnxEthTunnelSAPMemberTagValue	1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1.2	TmnxEncapVal	read-create	The value of tmnxEthTunnelSAPMemberTagValue specifies the members' encapsulation for the SAP. The default value of all ones (0xFFFFFFFF) represents an invalid or unspecified tag.
tmnxEthTunnelStatistics	1.3.6.1.4.1.6527.3.1.2.64.2
tmnxEthTunnelNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.64
tmnxEthTunnelNotifications	1.3.6.1.4.1.6527.3.1.3.64.0
tmnxEthTunnelApsNotifications	1.3.6.1.4.1.6527.3.1.3.64.0.2
NTF tmnxEthTunnelApsCfgRaiseAlarm	1.3.6.1.4.1.6527.3.1.3.64.0.2.1			The tmnxEthTunnelApsCfgRaiseAlarm is generated when an Ethernet Tunnel Group working and protection configuration mismatch is detected, at the ETH layer, by detecting the reception of APS protocol from the working transport entity.
NTF tmnxEthTunnelApsCfgClearAlarm	1.3.6.1.4.1.6527.3.1.3.64.0.2.2			The tmnxEthTunnelApsCfgClearAlarm is generated when an Ethernet Tunnel Group working and protection configuration mismatch is cleared.
NTF tmnxEthTunnelApsPrvsnRaiseAlarm	1.3.6.1.4.1.6527.3.1.3.64.0.2.3			The tmnxEthTunnelApsPrvsnRaiseAlarm is generated when an Ethernet Tunnel Group provisioning mismatch is detected, at the ETH layer, by comparing A, B and D bits of the transmitted and received APS protocol. The provision mismatch state is considered as if there is a signal failure on the protection member. This ensures that the working member is kept as active member in the provision mismatch state.
NTF tmnxEthTunnelApsPrvsnClearAlarm	1.3.6.1.4.1.6527.3.1.3.64.0.2.4			The tmnxEthTunnelApsPrvsnClearAlarm is generated when an Ethernet Tunnel Group provisioning mismatch is cleared.
NTF tmnxEthTunnelApsNoRspRaiseAlarm	1.3.6.1.4.1.6527.3.1.3.64.0.2.5			The tmnxEthTunnelApsNoRspRaiseAlarm is generated when an Ethernet Tunnel Group experiences an incompletion of protection switching, at the ETH layer, by comparing the transmitted 'Requested Signal' values and the received 'Bridged Signal' in the APS protocol.
NTF tmnxEthTunnelApsNoRspClearAlarm	1.3.6.1.4.1.6527.3.1.3.64.0.2.6			The tmnxEthTunnelApsNoRspClearAlarm is generated when an Ethernet Tunnel Group no longer experiences an incompletion of protection switching at the ETH layer.
NTF tmnxEthTunnelApsSwitchoverAlarm	1.3.6.1.4.1.6527.3.1.3.64.0.2.7			The tmnxEthTunnelApsSwitchoverAlarm is generated when an Ethernet Tunnel Group experiences a member activity switchover. The tmnxEthTunnelMemberPrecedence always specifies the active member.

RFC description

Manages Ethernet Tunnel components for Alcatel-Lucent SROS carrier-class routers.

Start monitoring Alcatel-Lucent (Nokia) 7750/7450-series SROS service routers (Ethernet tunnel protection-switching status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-ETH-TUNNEL-MIB