All MIBs › TELDAT-MON-FEATURES-BRS-MIB
Category: Teldat Router Management
Description: Monitors Teldat router bandwidth reservation system (BRS) feature status, usage, and operational counters.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TELDAT-MON-FEATURES-BRS-MIB?
TELDAT-MON-FEATURES-BRS-MIB is a vendor-specific MIB from Teldat covering the Bandwidth Reservation System (BRS) feature on Teldat routers, which manages traffic classes and bandwidth allocation per interface. It exposes a per-interface, per-class counter table tracking transmitted and discarded packets and bytes for each configured BRS traffic class. Its monitoring purpose is software/feature performance status: administrators use it to verify that bandwidth reservation policies are working as intended, watching for discarded packets/bytes that indicate a traffic class is exceeding its reserved bandwidth or being starved, and can reset counters per interface/class as needed. It is a feature-specific companion to other Teldat MIBs (such as interface and QoS-related modules) since BRS operates on top of physical/logical interfaces already represented elsewhere. It is typically deployed in enterprise or branch-office WAN links where Teldat routers enforce QoS bandwidth guarantees across multiple traffic classes. Engineers can download the TELDAT-MON-FEATURES-BRS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-FEATURES-BRS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Teldat enterprise/carrier routers
Monitoring Examples
An administrator would poll telProdNpMonFeatBrsDevCountTable / telProdNpMonFeatBrsDevCountEntry, indexed by telProdNpMonFeatBrsDevCountIfc and telProdNpMonFeatBrsDevCountClass, to compare telProdNpMonFeatBrsDevCountTxPkt/TxByt against telProdNpMonFeatBrsDevCountDiscPkt/DiscByt for a given traffic class -- a rising discard count on a supposedly low-priority class while a high-priority class shows clean throughput indicates the BRS policy is correctly protecting priority traffic under congestion. The telProdNpMonFeatBrsDevCountClear object lets an operator reset counters after adjusting the bandwidth reservation configuration.
What Can Be Monitored
- per-class transmitted packets/bytes
- per-class discarded packets/bytes
- per-interface BRS traffic class counters
- counter reset/clear status
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge |
From RFC1213-MIB
| DisplayString |
| telProdNpMonFeatures | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| telProdNpMonFeatBrs | 1.3.6.1.4.1.2007.4.1.2.4.1 | |||
| telProdNpMonFeatBrsDevCountTable | 1.3.6.1.4.1.2007.4.1.2.4.1.1 | not-accessible | Displays the last statistics describing bandwidth reservation traffic for the selected interface. For the Frame Relay interface displays the last statistics describing bandwidth reservation traffic for all circuit classes of the interface. | |
| telProdNpMonFeatBrsDevCountEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1 | not-accessible | The table index are: the interface number and the order of the selected class within the interface. | |
| INT telProdNpMonFeatBrsDevCountIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsDevCountIndex | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.2 | INTEGER | read-only | Second index: class order within the interface. |
| INT telProdNpMonFeatBrsDevCountClear | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.3 | INTEGER | read-write | Clear command to delete statistics. Enter 1 (delete) to clear the counters. In case the counters were correctly deleted, it will appear 2 (ok); otherwise it will appear 3 (error). Finally, if the counter has been never cleared it will appear 4 (undefined). |
| STR telProdNpMonFeatBrsDevCountClass | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.4 | DisplayString | read-only | Class name. |
| CTR telProdNpMonFeatBrsDevCountTxPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.5 | Counter | read-only | Number of packets transmitted. |
| CTR telProdNpMonFeatBrsDevCountTxByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.6 | Counter | read-only | Number of bytes transmitted. |
| CTR telProdNpMonFeatBrsDevCountDiscByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.7 | Counter | read-only | Number of bytes lost due to overflow. |
| CTR telProdNpMonFeatBrsDevCountDiscPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.8 | Counter | read-only | Number of discarded packets. |
| CTR telProdNpMonFeatBrsDevCountInPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.9 | Counter | read-only | Number of input packets: packets offered to a class before the application of any QoS action. |
| CTR telProdNpMonFeatBrsDevCountInByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.10 | Counter | read-only | Number of input bytes: bytes offered to a class before the application of any QoS action. |
| CTR telProdNpMonFeatBrsDevCountDiscRLPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.11 | Counter | read-only | Number of discarded packets due to rate-limit. |
| CTR telProdNpMonFeatBrsDevCountDiscRLByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.12 | Counter | read-only | Number of discarded bytes due to rate-limit. |
| CTR telProdNpMonFeatBrsDevCountRemarkPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.13 | Counter | read-only | Number of exceeded packets which are dscp-marked. |
| CTR telProdNpMonFeatBrsDevCountRemarkByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.14 | Counter | read-only | Number of exceeded bytes which are dscp-marked. |
| CTR telProdNpMonFeatBrsDevCountReassPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.15 | Counter | read-only | Number of exceeded packets which are re-classified (reassigned to another BRS class). |
| CTR telProdNpMonFeatBrsDevCountReassByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.16 | Counter | read-only | Number of exceeded bytes which are re-classified (reassigned to another BRS class). |
| CTR telProdNpMonFeatBrsDevCountLoopPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.17 | Counter | read-only | Number of discarded packets because they were re-classified and reassigned to a class to which they were previously assigned. |
| CTR telProdNpMonFeatBrsDevCountLoopByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.18 | Counter | read-only | Number of discarded bytes because they were re-classified and reassigned to a class to which they were previously assigned. |
| CTR telProdNpMonFeatBrsDevCountQueueOvflPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.19 | Counter | read-only | Number of discarded packets due to queue overflow. |
| CTR telProdNpMonFeatBrsDevCountQueueOvflByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.20 | Counter | read-only | Number of discarded bytes due to queue overflow. |
| CTR telProdNpMonFeatBrsDevCountWredPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.21 | Counter | read-only | Number of discarded packets due to WRED. |
| CTR telProdNpMonFeatBrsDevCountWredByt | 1.3.6.1.4.1.2007.4.1.2.4.1.1.1.22 | Counter | read-only | Number of discarded bytes due to WRED. |
| telProdNpMonFeatBrsDevLastTable | 1.3.6.1.4.1.2007.4.1.2.4.1.2 | not-accessible | Displays the last statistics of bandwidth reservation saved for the interfaces. | |
| telProdNpMonFeatBrsDevLastEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1 | not-accessible | The table index are: the interface number and the order of the selected class within the interface. | |
| INT telProdNpMonFeatBrsDevLastIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsDevLastIndex | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.2 | INTEGER | read-only | Second index: class order within the interface. |
| STR telProdNpMonFeatBrsDevLastClass | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.3 | DisplayString | read-only | Class name. |
| CTR telProdNpMonFeatBrsDevLastTxPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.4 | Counter | read-only | Number of packets transmitted. |
| CTR telProdNpMonFeatBrsDevLastTxByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.5 | Counter | read-only | Number of bytes transmitted. |
| CTR telProdNpMonFeatBrsDevLastDiscByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.6 | Counter | read-only | Number of bytes lost due to overflow. |
| CTR telProdNpMonFeatBrsDevLastDiscPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.7 | Counter | read-only | Number of discarded packets. |
| CTR telProdNpMonFeatBrsDevLastInPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.8 | Counter | read-only | Number of input packets: packets offered to a class before the application of any QoS action. |
| CTR telProdNpMonFeatBrsDevLastInByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.9 | Counter | read-only | Number of input bytes: bytes offered to a class before the application of any QoS action. |
| CTR telProdNpMonFeatBrsDevLastDiscRLPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.10 | Counter | read-only | Number of discarded packets due to rate-limit. |
| CTR telProdNpMonFeatBrsDevLastDiscRLByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.11 | Counter | read-only | Number of discarded bytes due to rate-limit. |
| CTR telProdNpMonFeatBrsDevLastRemarkPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.12 | Counter | read-only | Number of exceeded packets which are dscp-marked. |
| CTR telProdNpMonFeatBrsDevLastRemarkByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.13 | Counter | read-only | Number of exceeded bytes which are dscp-marked. |
| CTR telProdNpMonFeatBrsDevLastReassPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.14 | Counter | read-only | Number of exceeded packets which are re-classified (reassigned to another BRS class). |
| CTR telProdNpMonFeatBrsDevLastReassByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.15 | Counter | read-only | Number of exceeded bytes which are re-classified (reassigned to another BRS class). |
| CTR telProdNpMonFeatBrsDevLastLoopPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.16 | Counter | read-only | Number of discarded packets because they were re-classified and reassigned to a class to which they were previously assigned. |
| CTR telProdNpMonFeatBrsDevLastLoopByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.17 | Counter | read-only | Number of discarded bytes because they were re-classified and reassigned to a class to which they were previously assigned. |
| CTR telProdNpMonFeatBrsDevLastQueueOvflPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.18 | Counter | read-only | Number of discarded packets due to queue overflow. |
| CTR telProdNpMonFeatBrsDevLastQueueOvflByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.19 | Counter | read-only | Number of discarded bytes due to queue overflow. |
| CTR telProdNpMonFeatBrsDevLastWredPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.20 | Counter | read-only | Number of discarded packets due to WRED. |
| CTR telProdNpMonFeatBrsDevLastWredByt | 1.3.6.1.4.1.2007.4.1.2.4.1.2.1.21 | Counter | read-only | Number of discarded bytes due to WRED. |
| telProdNpMonFeatBrsFrCirCountTable | 1.3.6.1.4.1.2007.4.1.2.4.1.3 | not-accessible | Displays statistics describing bandwidth reservation traffic for the selected Frame Relay interface and circuit. | |
| telProdNpMonFeatBrsFrCirCountEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1 | not-accessible | Each entry contains statistics describing bandwidth reservation traffic for the selected Frame Relay interface and circuit. The table index are: the interface number, the Frame Relay circuit number (DLCI) and the class order within that circuit in this Frame Relay interface. | |
| INT telProdNpMonFeatBrsFrCirCountIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsFrCirCountCir | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.2 | INTEGER | read-only | Second index: Frame Relay circuit number (DLCI). |
| INT telProdNpMonFeatBrsFrCirCountIndex | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.3 | INTEGER | read-only | Third index: class order within that circuit in this Frame Relay interface. |
| INT telProdNpMonFeatBrsFrCirCountClear | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.4 | INTEGER | read-write | Clear command to delete statistics. Enter 1 (delete) to clear the counters. In case the counters were correctly deleted, it will appear 2 (ok); otherwise it will appear 3 (error). Finally, if the counter has been never cleared it will appear 4 (undefined). |
| STR telProdNpMonFeatBrsFrCirCountClass | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.5 | DisplayString | read-only | Class name. |
| CTR telProdNpMonFeatBrsFrCirCountTxPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.6 | Counter | read-only | Number of packets transmitted. |
| CTR telProdNpMonFeatBrsFrCirCountTxByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.7 | Counter | read-only | Number of bytes transmitted. |
| CTR telProdNpMonFeatBrsFrCirCountDiscByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.8 | Counter | read-only | Number of packets lost due to overflow. |
| CTR telProdNpMonFeatBrsFrCirCountDiscPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.9 | Counter | read-only | Number of discarded packets. |
| CTR telProdNpMonFeatBrsFrCirCountInPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.10 | Counter | read-only | Number of input packets: packets offered to a class before the application of any QoS action. |
| CTR telProdNpMonFeatBrsFrCirCountInByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.11 | Counter | read-only | Number of input bytes: bytes offered to a class before the application of any QoS action. |
| CTR telProdNpMonFeatBrsFrCirCountDiscRLPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.12 | Counter | read-only | Number of discarded packets due to rate-limit. |
| CTR telProdNpMonFeatBrsFrCirCountDiscRLByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.13 | Counter | read-only | Number of discarded bytes due to rate-limit. |
| CTR telProdNpMonFeatBrsFrCirCountRemarkPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.14 | Counter | read-only | Number of exceeded packets which are dscp-marked. |
| CTR telProdNpMonFeatBrsFrCirCountRemarkByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.15 | Counter | read-only | Number of exceeded bytes which are dscp-marked. |
| CTR telProdNpMonFeatBrsFrCirCountReassPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.16 | Counter | read-only | Number of exceeded packets which are re-classified (reassigned to another BRS class). |
| CTR telProdNpMonFeatBrsFrCirCountReassByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.17 | Counter | read-only | Number of exceeded bytes which are re-classified (reassigned to another BRS class). |
| CTR telProdNpMonFeatBrsFrCirCountLoopPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.18 | Counter | read-only | Number of discarded packets because they were re-classified and reassigned to a class to which they were previously assigned. |
| CTR telProdNpMonFeatBrsFrCirCountLoopByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.19 | Counter | read-only | Number of discarded bytes because they were re-classified and reassigned to a class to which they were previously assigned. |
| CTR telProdNpMonFeatBrsFrCirCountQueueOvflPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.20 | Counter | read-only | Number of discarded packets due to queue overflow. |
| CTR telProdNpMonFeatBrsFrCirCountQueueOvflByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.21 | Counter | read-only | Number of discarded bytes due to queue overflow. |
| CTR telProdNpMonFeatBrsFrCirCountWredPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.22 | Counter | read-only | Number of discarded packets due to WRED. |
| CTR telProdNpMonFeatBrsFrCirCountWredByt | 1.3.6.1.4.1.2007.4.1.2.4.1.3.1.23 | Counter | read-only | Number of discarded bytes due to WRED. |
| telProdNpMonFeatBrsFrCirLastTable | 1.3.6.1.4.1.2007.4.1.2.4.1.4 | not-accessible | Displays last statistics of bandwidth reservation saved for the selected Frame Relay interface and circuit. | |
| telProdNpMonFeatBrsFrCirLastEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1 | not-accessible | The table index are: the interface number, the Frame Relay circuit number (DLCI) and the class order within that circuit in this Frame Relay interface. | |
| INT telProdNpMonFeatBrsFrCirLastIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsFrCirLastCir | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.2 | INTEGER | read-only | Second index: Frame Relay circuit number (DLCI). |
| INT telProdNpMonFeatBrsFrCirLastIndex | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.3 | INTEGER | read-only | Third index: class order within that circuit in this Frame Relay interface. |
| STR telProdNpMonFeatBrsFrCirLastClass | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.4 | DisplayString | read-only | Class name. |
| CTR telProdNpMonFeatBrsFrCirLastTxPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.5 | Counter | read-only | Number of packets transmitted. |
| CTR telProdNpMonFeatBrsFrCirLastTxByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.6 | Counter | read-only | Number of bytes transmitted. |
| CTR telProdNpMonFeatBrsFrCirLastDiscByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.7 | Counter | read-only | Number of bytes lost due to overflow. |
| CTR telProdNpMonFeatBrsFrCirLastDiscPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.8 | Counter | read-only | Number of discarded packets. |
| CTR telProdNpMonFeatBrsFrCirLastInPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.9 | Counter | read-only | Number of input packets: packets offered to a class before the application of any QoS action. |
| CTR telProdNpMonFeatBrsFrCirLastInByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.10 | Counter | read-only | Number of input bytes: bytes offered to a class before the application of any QoS action. |
| CTR telProdNpMonFeatBrsFrCirLastDiscRLPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.11 | Counter | read-only | Number of discarded packets due to rate-limit. |
| CTR telProdNpMonFeatBrsFrCirLastDiscRLByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.12 | Counter | read-only | Number of discarded bytes due to rate-limit. |
| CTR telProdNpMonFeatBrsFrCirLastRemarkPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.13 | Counter | read-only | Number of exceeded packets which are dscp-marked. |
| CTR telProdNpMonFeatBrsFrCirLastRemarkByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.14 | Counter | read-only | Number of exceeded bytes which are dscp-marked. |
| CTR telProdNpMonFeatBrsFrCirLastReassPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.15 | Counter | read-only | Number of exceeded packets which are re-classified (reassigned to another BRS class). |
| CTR telProdNpMonFeatBrsFrCirLastReassByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.16 | Counter | read-only | Number of exceeded bytes which are re-classified (reassigned to another BRS class). |
| CTR telProdNpMonFeatBrsFrCirLastLoopPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.17 | Counter | read-only | Number of discarded packets because they were re-classified and reassigned to a class to which they were previously assigned. |
| CTR telProdNpMonFeatBrsFrCirLastLoopByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.18 | Counter | read-only | Number of discarded bytes because they were re-classified and reassigned to a class to which they were previously assigned. |
| CTR telProdNpMonFeatBrsFrCirLastQueueOvflPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.19 | Counter | read-only | Number of discarded packets due to queue overflow. |
| CTR telProdNpMonFeatBrsFrCirLastQueueOvflByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.20 | Counter | read-only | Number of discarded bytes due to queue overflow. |
| CTR telProdNpMonFeatBrsFrCirLastWredPkt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.21 | Counter | read-only | Number of discarded packets due to WRED. |
| CTR telProdNpMonFeatBrsFrCirLastWredByt | 1.3.6.1.4.1.2007.4.1.2.4.1.4.1.22 | Counter | read-only | Number of discarded bytes due to WRED. |
| telProdNpMonFeatBrsDevQueueTable | 1.3.6.1.4.1.2007.4.1.2.4.1.5 | not-accessible | This table contains information about the length and occupation of the BRS queues for each class and each priority in all interfaces with this facility enabled. | |
| telProdNpMonFeatBrsDevQueueEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1 | not-accessible | Each entry in the table contains data about the length and occupation of the BRS queues for a class within an interface. The entry is comprised of several variables to store the current value and the maximum permitted value of the queues for each priority within a configured class in an interface. In cases of PPP interfaces with real-time traffic, the occupation of non-real-time traffic also appears. | |
| INT telProdNpMonFeatBrsDevQueueIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsDevQueueClassNum | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.2 | INTEGER | read-only | Second index: class order within the interface. |
| STR telProdNpMonFeatBrsDevQueueClassName | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.3 | DisplayString | read-only | Class name. |
| GAU telProdNpMonFeatBrsDevQueueUrgNum | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.4 | Gauge | read-only | Current value of the urgent priority queue. |
| INT telProdNpMonFeatBrsDevQueueUrgLen | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.5 | INTEGER | read-only | Length of the urgent priority queue. |
| GAU telProdNpMonFeatBrsDevQueueHighNum | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.6 | Gauge | read-only | Current value of the high priority queue. |
| INT telProdNpMonFeatBrsDevQueueHighLen | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.7 | INTEGER | read-only | Length of the high priority queue. |
| GAU telProdNpMonFeatBrsDevQueueNormNum | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.8 | Gauge | read-only | Current value of the normal priority queue. |
| INT telProdNpMonFeatBrsDevQueueNormLen | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.9 | INTEGER | read-only | Length of the normal priority queue. |
| GAU telProdNpMonFeatBrsDevQueueLowNum | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.10 | Gauge | read-only | Current value of the low priority queue. |
| INT telProdNpMonFeatBrsDevQueueLowLen | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.11 | INTEGER | read-only | Length of the low priority queue. |
| INT telProdNpMonFeatBrsDevQueueThroughput | 1.3.6.1.4.1.2007.4.1.2.4.1.5.1.12 | INTEGER | read-only | Throughput of class. |
| telProdNpMonFeatBrsFRCirQueueTable | 1.3.6.1.4.1.2007.4.1.2.4.1.6 | not-accessible | This table contains information about the length and occupation of the BRS queues for each class and each priority in all Frame Relay circuits with this facility enabled. | |
| telProdNpMonFeatBrsFRCirQueueEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1 | not-accessible | Each entry in the table contains data about the length and occupation of the BRS queues for a class within a circuit in a Frame Relay interface. The entry is comprised of several variables to store the current value and the maximum permitted value of the queues for each priority within a configured class in an interface. | |
| INT telProdNpMonFeatBrsFRCirQueueIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsFRCirQueueDlci | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.2 | INTEGER | read-only | Second index: Frame Relay circuit number (DLCI). |
| INT telProdNpMonFeatBrsFRCirQueueClassNum | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.3 | INTEGER | read-only | Third index: class order within that circuit in this Frame Relay interface. |
| STR telProdNpMonFeatBrsFRCirQueueClassName | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.4 | DisplayString | read-only | Class name. |
| GAU telProdNpMonFeatBrsFRCirQueueUrgNum | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.5 | Gauge | read-only | Current value of the urgent priority queue. |
| INT telProdNpMonFeatBrsFRCirQueueUrgLen | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.6 | INTEGER | read-only | Length of the urgent priority queue. |
| GAU telProdNpMonFeatBrsFRCirQueueHighNum | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.7 | Gauge | read-only | Current value of the high priority queue. |
| INT telProdNpMonFeatBrsFRCirQueueHighLen | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.8 | INTEGER | read-only | Length of the high priority queue. |
| GAU telProdNpMonFeatBrsFRCirQueueNormNum | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.9 | Gauge | read-only | Current value of the normal priority queue. |
| INT telProdNpMonFeatBrsFRCirQueueNormLen | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.10 | INTEGER | read-only | Length of the normal priority queue. |
| GAU telProdNpMonFeatBrsFRCirQueueLowNum | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.11 | Gauge | read-only | Current value of the low priority queue. |
| INT telProdNpMonFeatBrsFRCirQueueLowLen | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.12 | INTEGER | read-only | Length of the low priority queue. |
| INT telProdNpMonFeatBrsFRCirQueueThroughput | 1.3.6.1.4.1.2007.4.1.2.4.1.6.1.13 | INTEGER | read-only | Throughput of class. |
| telProdNpMonFeatBrsDevTSTable | 1.3.6.1.4.1.2007.4.1.2.4.1.7 | not-accessible | This table contains information relative to traffic-shaping for each class and for the whole interface ('Global' row). | |
| telProdNpMonFeatBrsDevTSEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1 | not-accessible | Each entry is comprised of several variables to store information relative to traffic-shaping for one class within an interface or for the whole interface ('Global' row). | |
| INT telProdNpMonFeatBrsDevTSIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsDevTSClassNum | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.2 | INTEGER | read-only | Second index: class order within the interface. |
| INT telProdNpMonFeatBrsDevTSClear | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.3 | INTEGER | read-write | This variable is used to make a clear operation: when it is set to 1 (delete), a clear command is executed, starting the measure of the throughput in this moment. The throughput measuring will only take into account those packets which are transmitted after this instant. In reading operations (GET) this variable will show the result of last clear operation attempt: the value is 2 (ok) if clear operation was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if no clear operations have been made yet. |
| STR telProdNpMonFeatBrsDevTSClassName | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.4 | DisplayString | read-only | Class name. |
| INT telProdNpMonFeatBrsDevTSCir | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.5 | INTEGER | read-only | Maximum average permitted throughput (0 indicates there is no limit). |
| INT telProdNpMonFeatBrsDevTSBurst | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.6 | INTEGER | read-only | Currently used burst size (in bits). |
| INT telProdNpMonFeatBrsDevTSState | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.7 | INTEGER | read-only | There are three possible states: (1) congested, (2) bursting, (3) ready. Transmission cannot be executed when a class or an interface is congested; transmission is possible in any other state. |
| INT telProdNpMonFeatBrsDevTSQueued | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.8 | INTEGER | read-only | Indicates if this class is queued: when a class is queued, there is traffic to be transmitted. |
| INT telProdNpMonFeatBrsDevTSLastTx | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.9 | INTEGER | read-only | Last instant where a packet for this class was transmitted. (This parameter is for Teldat personnel use only). |
| INT telProdNpMonFeatBrsDevTSThroughput | 1.3.6.1.4.1.2007.4.1.2.4.1.7.1.10 | INTEGER | read-only | Average throughput for a class. |
| telProdNpMonFeatBrsFRCirTSTable | 1.3.6.1.4.1.2007.4.1.2.4.1.8 | not-accessible | This table contains information relative to traffic-shaping for each class within a Frame Relay circuit (DLCI) and for the whole circuit ('Global' row). | |
| telProdNpMonFeatBrsFRCirTSEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1 | not-accessible | Each entry is comprised of several variables to store information relative to traffic-shaping for one class within a Frame Relay circuit (DLCI) or for the whole circuit ('Global' row). | |
| INT telProdNpMonFeatBrsFRCirTSIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsFRCirTSDlci | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.2 | INTEGER | read-only | Second index: Frame Relay circuit number (DLCI). |
| INT telProdNpMonFeatBrsFRCirTSClassNum | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.3 | INTEGER | read-only | Third index: class order within the Frame Relay circuit (DLCI). |
| INT telProdNpMonFeatBrsFRCirTSClear | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.4 | INTEGER | read-write | This variable is used to make a clear operation: when it is set to 1 (delete), a clear command is executed, starting the measure of the throughput in this moment. The throughput measuring will only take into account those packets which are transmitted after this instant. In reading operations (GET) this variable will show the result of last clear operation attempt: the value is 2 (ok) if clear operation was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if no clear operations have been made yet. |
| STR telProdNpMonFeatBrsFRCirTSClassName | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.5 | DisplayString | read-only | Class name. |
| INT telProdNpMonFeatBrsFRCirTSCir | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.6 | INTEGER | read-only | Maximum average permitted throughput (0 indicates there is no limit). |
| INT telProdNpMonFeatBrsFRCirTSBurst | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.7 | INTEGER | read-only | Currently used burst size (in bits). |
| INT telProdNpMonFeatBrsFRCirTSState | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.8 | INTEGER | read-only | There are three possible states: (1) congested, (2) bursting, (3) ready. Transmission cannot be executed when a class or an interface is congested; transmission is possible in any other state. |
| INT telProdNpMonFeatBrsFRCirTSQueued | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.9 | INTEGER | read-only | Indicates if this class is queued: when a class is queued, there is traffic to be transmitted. |
| INT telProdNpMonFeatBrsFRCirTSLastTx | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.10 | INTEGER | read-only | Last instant where a packet for this class was transmitted. (This parameter is for Teldat personnel use only). |
| INT telProdNpMonFeatBrsFRCirTSThroughput | 1.3.6.1.4.1.2007.4.1.2.4.1.8.1.11 | INTEGER | read-only | Average throughput for a class. |
| telProdNpMonFeatBrsDevTSLvlIndTable | 1.3.6.1.4.1.2007.4.1.2.4.1.9 | not-accessible | This table contains information relative to traffic-shaping used for level-indicator for each class and for the whole interface ('Global' row). | |
| telProdNpMonFeatBrsDevTSLvlIndEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1 | not-accessible | Each entry is comprised of several variables to store information relative to traffic-shaping for level-indicator for one class within an interface or for the whole interface ('Global' row). | |
| INT telProdNpMonFeatBrsDevTSLvlIndIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsDevTSLvlIndClassNum | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.2 | INTEGER | read-only | Second index: class order within the interface. |
| INT telProdNpMonFeatBrsDevTSLvlIndClear | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.3 | INTEGER | read-write | This variable is used to make a clear operation: when it is set to 1 (delete), a clear command is executed, starting the measure of the throughput in this moment. The throughput measuring will only take into account those packets which are transmitted after this instant. In reading operations (GET) this variable will show the result of last clear operation attempt: the value is 2 (ok) if clear operation was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if no clear operations have been made yet. |
| STR telProdNpMonFeatBrsDevTSLvlIndClassName | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.4 | DisplayString | read-only | Class name. |
| INT telProdNpMonFeatBrsDevTSLvlIndCir | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.5 | INTEGER | read-only | Maximum average permitted throughput (0 indicates there is no limit). |
| INT telProdNpMonFeatBrsDevTSLvlIndBurst | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.6 | INTEGER | read-only | Currently used burst size (in bits). |
| INT telProdNpMonFeatBrsDevTSLvlIndState | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.7 | INTEGER | read-only | There are three possible states: (1) congested, (2) bursting, (3) ready. A level-indicator is updated when a class or an interface becomes congested; when congestion ends, it comes back to previous state. |
| INT telProdNpMonFeatBrsDevTSLvlIndQueued | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.8 | INTEGER | read-only | Indicates if this class is queued: when a class is queued, there is traffic to be transmitted. |
| INT telProdNpMonFeatBrsDevTSLvlIndLastTx | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.9 | INTEGER | read-only | Last instant where a packet for this class was transmitted. (This parameter is for Teldat personnel use only). |
| INT telProdNpMonFeatBrsDevTSLvlIndThroughput | 1.3.6.1.4.1.2007.4.1.2.4.1.9.1.10 | INTEGER | read-only | Average throughput for a class. |
| telProdNpMonFeatBrsFRCirTSLvlIndTable | 1.3.6.1.4.1.2007.4.1.2.4.1.10 | not-accessible | This table contains information relative to traffic-shaping used for level-indicator for each class within a Frame Relay circuit (DLCI) and for the whole circuit ('Global' row). | |
| telProdNpMonFeatBrsFRCirTSLvlIndEntry | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1 | not-accessible | Each entry is comprised of several variables to store information relative to traffic-shaping used for level-indicator for one class within a Frame Relay circuit (DLCI) or for the whole circuit ('Global' row). | |
| INT telProdNpMonFeatBrsFRCirTSLvlIndIfc | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.1 | INTEGER | read-only | First index: interface number. |
| INT telProdNpMonFeatBrsFRCirTSLvlIndDlci | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.2 | INTEGER | read-only | Second index: Frame Relay circuit number (DLCI). |
| INT telProdNpMonFeatBrsFRCirTSLvlIndClassNum | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.3 | INTEGER | read-only | Third index: class order within the Frame Relay circuit (DLCI). |
| INT telProdNpMonFeatBrsFRCirTSLvlIndClear | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.4 | INTEGER | read-write | This variable is used to make a clear operation: when it is set to 1 (delete), a clear command is executed, starting the measure of the throughput in this moment. The throughput measuring will only take into account those packets which are transmitted after this instant. In reading operations (GET) this variable will show the result of last clear operation attempt: the value is 2 (ok) if clear operation was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if no clear operations have been made yet. |
| STR telProdNpMonFeatBrsFRCirTSLvlIndClassName | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.5 | DisplayString | read-only | Class name. |
| INT telProdNpMonFeatBrsFRCirTSLvlIndCir | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.6 | INTEGER | read-only | Maximum average permitted throughput (0 indicates there is no limit). |
| INT telProdNpMonFeatBrsFRCirTSLvlIndBurst | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.7 | INTEGER | read-only | Currently used burst size (in bits). |
| INT telProdNpMonFeatBrsFRCirTSLvlIndState | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.8 | INTEGER | read-only | There are three possible states: (1) congested, (2) bursting, (3) ready. A level-indicator is updated when a class or an interface becomes congested; when congestion ends, it comes back to previous state. |
| INT telProdNpMonFeatBrsFRCirTSLvlIndQueued | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.9 | INTEGER | read-only | Indicates if this class is queued: when a class is queued, there is traffic to be transmitted. |
| INT telProdNpMonFeatBrsFRCirTSLvlIndLastTx | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.10 | INTEGER | read-only | Last instant where a packet for this class was transmitted. (This parameter is for Teldat personnel use only). |
| INT telProdNpMonFeatBrsFRCirTSLvlIndThroughput | 1.3.6.1.4.1.2007.4.1.2.4.1.10.1.11 | INTEGER | read-only | Average throughput for a class. |
RFC description
Monitors Teldat Band Reservation System (BRS) traffic statistics and queue management metrics.
Start monitoring Teldat enterprise/carrier router (Bandwidth Reservation System per-class traffic status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.