All MIBs › TAIT-TN9300-MIB
Organization: www.taitworld.com
Last Updated: 2019-03-18
Category: Radio and Wireless
Description: Manages Tait TN9300 mobile radio configuration, channel state, and transceiver operations.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TAIT-TN9300-MIB?
TAIT-TN9300-MIB is a Tait Communications MIB for the TN9300 DMR (Digital Mobile Radio) Node Controller, managing configuration and operational state of Tait's TaitNet DMR trunked radio network node controllers. It exposes node-level identity/version data, node priority and requested-vs-actual operational state, network connectivity check status to peer nodes (address and state for two configured check targets), and call-switching activity. Its monitoring value is centered on software/system status of the node controller: tn9300State versus tn9300RequestedState reveals whether the node has actually transitioned to its intended operating mode, tn9300NetCheckStateA/B show connectivity health to peer nodes, and tn9300CallsSwitching indicates current call-handling load. It is a self-contained proprietary radio-network MIB with no evident dependency on general IETF MIBs beyond basic SNMP conventions. It is deployed in TaitNet DMR trunked radio networks (public safety, utility, transport) where TN9300 node controllers manage radio site connectivity and call switching. Engineers can download the TAIT-TN9300-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TAIT-TN9300-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Tait TaitNet TN9300 DMR node controller
Monitoring Examples
A network operations team would poll tn9300State against tn9300RequestedState to confirm a node controller has successfully entered its intended state (e.g., active vs. standby) after a configuration change or failover. Polling tn9300NetCheckStateA/tn9300NetCheckStateB, alongside their configured tn9300NetCheckAddressA/tn9300NetCheckAddressB targets, would reveal a lost network path to a peer node before it causes a service outage. Monitoring tn9300CallsSwitching would show current call-switching activity, useful for detecting an overloaded node or confirming failover load has shifted correctly.
What Can Be Monitored
- node operational state vs requested state
- network connectivity check status to peer nodes
- calls switching / call load
- node version and priority
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TruthValue |
From TAIT-COMMON-MIB
| taitModules | OBJECT-IDENTITY |
| taitProducts | OBJECT-IDENTITY |
From TAIT-TN9300-TC
| ChannelState | |
| DipLineState | |
| EventSeverity | |
| LicenseValidity | |
| Mpt1327ChannelState | |
| Mpt1327LinkState | |
| NetworkCheckState | |
| NgwLinkState | |
| NodeRequestedState | |
| NodeState | |
| RemoteNodeState | |
| RemoteNodeSyncState | |
| SipCallSpeechVotingPriority | |
| SipLineIncomingType | |
| SipLineRegistrationType | |
| SipLineState | |
| UnitAuthentication | |
| UnitStatusMessageId |
How to Use in IPNetwork Monitor
Example using tn9300Mpt1327RxBytes OID:
Select a Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tn9300Mpt1327RxBytes into the Find box to locate it in the OID tree, then select it and click OK. The number of bytes received from the MPT1327 Gateway. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| tn9300MibModule | 1.3.6.1.4.1.3570.1.1.11 | TaitNet TN9300 DMR Node Controller Module | ||
| tn9300MIB | 1.3.6.1.4.1.3570.3.6 | |||
| tn9300Confs | 1.3.6.1.4.1.3570.3.6.1 | |||
| tn9300Groups | 1.3.6.1.4.1.3570.3.6.1.1 | |||
| tn9300StatusGroup | 1.3.6.1.4.1.3570.3.6.1.1.1 | The objects that describe the status of the node controller. | ||
| tn9300SiteGroup | 1.3.6.1.4.1.3570.3.6.1.1.2 | The objects that describe the status of a site. | ||
| tn9300ChannelGroup | 1.3.6.1.4.1.3570.3.6.1.1.3 | The objects that describe the status of a channel. | ||
| tn9300Mpt1327Group | 1.3.6.1.4.1.3570.3.6.1.1.6 | The objects that describe the status of the MPT1327 Gateway. | ||
| tn9300Mpt1327ChGroup | 1.3.6.1.4.1.3570.3.6.1.1.7 | The objects that describe the status of an MPT1327 gateway channel. | ||
| tn9300SipLineGroup | 1.3.6.1.4.1.3570.3.6.1.1.8 | The objects that describe the status of a SIP line. | ||
| tn9300DipLineGroup | 1.3.6.1.4.1.3570.3.6.1.1.9 | The objects that describe the status of a DIP connection. | ||
| tn9300RemoteNodeGroup | 1.3.6.1.4.1.3570.3.6.1.1.10 | The objects that describe the status of a remote node. | ||
| tn9300EventGroup | 1.3.6.1.4.1.3570.3.6.1.1.12 | The notification group. | ||
| tn9300MobileIpGroup | 1.3.6.1.4.1.3570.3.6.1.1.13 | The objects that describe the counters for mobile IP. | ||
| tn9300UnitGroup | 1.3.6.1.4.1.3570.3.6.1.1.14 | The objects that describe the status of a unit. | ||
| tn9300EventObjectGroup | 1.3.6.1.4.1.3570.3.6.1.1.15 | The objects that are used specifically for events. | ||
| tn9300EventGroupV2 | 1.3.6.1.4.1.3570.3.6.1.1.16 | The new set of notification objects. | ||
| tn9300NetworkGwGroup | 1.3.6.1.4.1.3570.3.6.1.1.17 | The objects that describe the status of a network gateway. | ||
| tn9300Compl | 1.3.6.1.4.1.3570.3.6.1.2 | |||
| tn9300ComplianceV1 | 1.3.6.1.4.1.3570.3.6.1.2.1 | The implementation requirements for the Tait TN9300 MIB | ||
| tn9300Objs | 1.3.6.1.4.1.3570.3.6.2 | |||
| tn9300NodeObjs | 1.3.6.1.4.1.3570.3.6.2.1 | |||
| STR tn9300Version | 1.3.6.1.4.1.3570.3.6.2.1.1 | DisplayString | read-only | The version of software running on the node controller. |
| STR tn9300Name | 1.3.6.1.4.1.3570.3.6.2.1.2 | DisplayString | read-only | Name: Represents the name of this node controller. |
| I32 tn9300Priority | 1.3.6.1.4.1.3570.3.6.2.1.3 | Integer32 | read-only | Priority: Represents the priority of this node. On multi-node systems the lowest priority node assumes control of the network. |
| NOD tn9300RequestedState | 1.3.6.1.4.1.3570.3.6.2.1.4 | NodeRequestedState | read-only | Requested state: Represents the state in which this node has been instructed to operate. Status types are Unknown (0), Offline (1), Program (2) or Online (3). |
| NOD tn9300State | 1.3.6.1.4.1.3570.3.6.2.1.5 | NodeState | read-only | State: Represents the state in which this node is operating. Status types are Unknown (0), Offline (1), Program (2), Switching (3) or Control (4). |
| IPt tn9300NetCheckAddressAType | 1.3.6.1.4.1.3570.3.6.2.1.7 | InetAddressType | read-only | The type of internet address for network check A. |
| IP tn9300NetCheckAddressA | 1.3.6.1.4.1.3570.3.6.2.1.8 | InetAddress | read-only | The IP address for network check A. |
| NET tn9300NetCheckStateA | 1.3.6.1.4.1.3570.3.6.2.1.9 | NetworkCheckState | read-only | The status of network check A. Status types are Not Configured (0), OK (1) or Failed (2). |
| IPt tn9300NetCheckAddressBType | 1.3.6.1.4.1.3570.3.6.2.1.10 | InetAddressType | read-only | The type of internet address for network check B. |
| IP tn9300NetCheckAddressB | 1.3.6.1.4.1.3570.3.6.2.1.11 | InetAddress | read-only | The IP address for network check B. |
| NET tn9300NetCheckStateB | 1.3.6.1.4.1.3570.3.6.2.1.12 | NetworkCheckState | read-only | The status of network check B. Status types are Not Configured (0), OK (1) or Failed (2). |
| G32 tn9300CallsSwitching | 1.3.6.1.4.1.3570.3.6.2.1.13 | Gauge32 | read-only | The number of calls being switched by this node. |
| G32 tn9300ConnectionsSwitching | 1.3.6.1.4.1.3570.3.6.2.1.14 | Gauge32 | read-only | The number of connections being switched by this node. |
| G32 tn9300MemoryUsage | 1.3.6.1.4.1.3570.3.6.2.1.15 | Gauge32 | read-only | The total physical memory used by all node processes (percent) |
| G32 tn9300CpuUsage | 1.3.6.1.4.1.3570.3.6.2.1.16 | Gauge32 | read-only | The current total CPU load of all node processes (percent) |
| T/F tn9300DiskSpaceOk | 1.3.6.1.4.1.3570.3.6.2.1.17 | TruthValue | read-only | Indicates whether the available disk space is above or below threshold. |
| LIC tn9300LicenseValidity | 1.3.6.1.4.1.3570.3.6.2.1.18 | LicenseValidity | read-only | The current validity of the license. Types are as follows: Valid (0), File not found (1), Invalid host ID (2), Invalid product code (3), Invalid version (4), Invalid expiry date (5), Expired (6), Corrupt signature (7), Conflicting features (8), Invalid tier mode (9), Invalid license format (10) |
| tn9300SiteObjs | 1.3.6.1.4.1.3570.3.6.2.2 | |||
| tn9300SiteTable | 1.3.6.1.4.1.3570.3.6.2.2.1 | not-accessible | This table stores the status of the sites connected to this node controller. | |
| tn9300SiteEntry | 1.3.6.1.4.1.3570.3.6.2.2.1.1 | not-accessible | The table entry index specification, just the site number. | |
| I32 tn9300SiteNumber | 1.3.6.1.4.1.3570.3.6.2.2.1.1.1 | Integer32 | not-accessible | Site Number: Represents a unique identifier for this site. |
| STR tn9300SiteName | 1.3.6.1.4.1.3570.3.6.2.2.1.1.2 | DisplayString | read-only | Site Name: The name of this site. |
| STR tn9300SiteSyscode | 1.3.6.1.4.1.3570.3.6.2.2.1.1.3 | DisplayString | read-only | Syscode: The syscode of this site. |
| T/F tn9300SiteEnabled | 1.3.6.1.4.1.3570.3.6.2.2.1.1.4 | TruthValue | read-only | Enabled: Boolean value, true if this site is enabled. |
| T/F tn9300SiteOk | 1.3.6.1.4.1.3570.3.6.2.2.1.1.5 | TruthValue | read-only | Enabled: Boolean value, true if this site is OK. |
| T/F tn9300SiteAutoQueueDepth | 1.3.6.1.4.1.3570.3.6.2.2.1.1.6 | TruthValue | read-only | Automatic Queue Depth: Boolean value, if true, the queue depth is set to twice the number of traffic channels at this site with a minimum value of 3 and a maximum of 20. |
| I32 tn9300SiteQueueDepth | 1.3.6.1.4.1.3570.3.6.2.2.1.1.7 | Integer32 | read-only | Queue Depth: Represents the maximum number of calls that are allowed to be queued at this site. |
| I32 tn9300SiteZone | 1.3.6.1.4.1.3570.3.6.2.2.1.1.8 | Integer32 | read-only | Zone: The ID of the zone to which this site belongs. When a call is placed to a radio that is registered on a site with a zone ID the network will attempt to contact the radio on all sites with the same zone ID. This reduces registration traffic but increases individual call request traffic. It is useful on systems with large numbers of radios and few individual calls. These systems often only make group calls. This feature is not recommended if registration based group calls are used. |
| I32 tn9300SiteExtraWaitSlots | 1.3.6.1.4.1.3570.3.6.2.2.1.1.9 | Integer32 | read-only | Extra Wait Slots: Represents the number of extra slots that the site should wait for a radio to reply to a control channel poll (i.e. an AHOY). This feature is used at sites where there is an extra delay in the transmission/reception of on-air codewords that puts it outside of the MPT timing specifications, e.g. a cell extender site, which can add in 1 or more slots of delay. Disadvantages: 1. To stop conflicts, the site will withdraw the extra slots when waiting. This means other radios will be unable to make call requests during this time. 2. As a site can only process one outgoing call (site to radio) at a time, it will not be able to process as many calls. 3. As a rule of thumb, each extra wait slot added to the site will halve the maximum call rate the site can handle. |
| I32 tn9300SiteCCReassignTimeout | 1.3.6.1.4.1.3570.3.6.2.2.1.1.10 | Integer32 | read-only | Control Channel Reassignment Timeout: Represents the time (in minutes), between switching the control channel from one channel to another. Control channel reassignment should be used only when there is a compelling (i.e. regulatory) reason to move the control channel at intervals. If this feature is used it is recommended that jammed channels are inhibited from becoming control channels. If set to 0, the lowest numbered, uninhibited channel becomes the control channel and remains so unless it fails. If it fails the node will reassign the next lowest numbered channel. Immediately before reassignment, the control channel issues a MOVE command to all radios to transfer them to the new control channel frequency. |
| T/F tn9300SiteTCRotation | 1.3.6.1.4.1.3570.3.6.2.2.1.1.11 | TruthValue | read-only | Traffic Channel Rotation: If traffic channel rotation is enabled, the node will allocate a new traffic channel to each call. The traffic channels are chosen based on the channel number with lower numbers being used first. Only idle channels that are configured to be traffic channels are used in the selection process. When all the channels at the site have been used, the selection process starts again with the lowest channel number. |
| I32 tn9300SiteRxActivityTimeout | 1.3.6.1.4.1.3570.3.6.2.2.1.1.12 | Integer32 | read-only | Site Receiver Activity Timeout: Represents a number of slots (each of duration 106ms). If interference is detected in each consecutive slot for this number of slots, the channel is deemed to be jammed. |
| I32 tn9300SiteRxInactiveTimeout | 1.3.6.1.4.1.3570.3.6.2.2.1.1.13 | Integer32 | read-only | Site Receiver Activity Timeout: Represents a number of slots (each of duration 106ms). If no interference is detected in each consecutive slot for this number of slots, the channel is deemed to be not jammed. |
| I32 tn9300SiteFramelength | 1.3.6.1.4.1.3570.3.6.2.2.1.1.14 | Integer32 | read-only | Framelength: Represents the number of slots in a frame. Bigger framelengths reduce the probability of two radios selecting the same slot and failing. However call setup is slower when retries occur. A value of zero represents dynamic framelength. In this case the node will use an algorithm, based on codeword statistics, to determine the most appropriate framelength between the limits set by the maximum and minimum dynamic framelength. |
| I32 tn9300SiteMinFramelength | 1.3.6.1.4.1.3570.3.6.2.2.1.1.15 | Integer32 | read-only | Minimum Dynamic Framelength: Represents the minimum number of slots in a frame when using dynamic framelength. |
| I32 tn9300SiteMaxFramelength | 1.3.6.1.4.1.3570.3.6.2.2.1.1.16 | Integer32 | read-only | Maximum Dynamic Framelength: Represents the maximum number of slots in a frame when using dynamic framelength. |
| I32 tn9300SiteDualCC | 1.3.6.1.4.1.3570.3.6.2.2.1.1.17 | Integer32 | read-only | Dual Control Channels: Allows for a second control channel on this site. Both control channels share the other channels for traffic use. This is useful at sites with lots of traffic channels and/or a large quantity of data communications. In addition to the primary control channel the next lowest numbered channel will be used as the second control channel (so long as it is correctly configured and not inhibited.) When this feature is enabled and a radio registers on the primary control channel: 1. The node determines if it is allowed to used the second control channel. 2. If it is, the node instructs the radio to register on the second control channel. When using dual control channels, you can have them with the same syscode or with complementary syscodes that have different PAR values Single (0), Dual-same syscode(1), Dual-different PAR(2) |
| I32 tn9300SiteOpenMuteTimeout | 1.3.6.1.4.1.3570.3.6.2.2.1.1.18 | Integer32 | read-only | Open Mute Timeout: Represents the time (seconds) that a traffic channel will wait for the receiver to go idle before sending clear messages. The traffic channel waits for the receiver to go idle as parties transmitting on the channel may miss the clear messages. On some systems the receiver may get jammed from noise (stuck mute) and therefore the channel may not go 'idle'. This timeout is used to force the sending of clear messages in these circumstances. |
| I32 tn9300SiteManAdjSiteRF | 1.3.6.1.4.1.3570.3.6.2.2.1.1.19 | Integer32 | read-only | Manual Adjacent Site RF: Represents the RF number of a manual adjacent control channel. Used for a cell extender. |
| STR tn9300SiteManAdjSiteSyscode | 1.3.6.1.4.1.3570.3.6.2.2.1.1.20 | DisplayString | read-only | Manual Adjacent Site Syscode: Represents the syscode of a manual adjacent control channel. Used for a cell extender. |
| G32 tn9300SiteNChannels | 1.3.6.1.4.1.3570.3.6.2.2.1.1.21 | Gauge32 | read-only | Number of channels: Represents the number of channels installed at this site. |
| G32 tn9300SiteNControlChannels | 1.3.6.1.4.1.3570.3.6.2.2.1.1.22 | Gauge32 | read-only | Number of control channels: Represents the number of channels operating as control channels at this site. |
| G32 tn9300SiteNTrafficChannels | 1.3.6.1.4.1.3570.3.6.2.2.1.1.23 | Gauge32 | read-only | Number of traffic channels: Represents the number of channels operating as traffic channels at this site. |
| G32 tn9300SiteNIdleChannels | 1.3.6.1.4.1.3570.3.6.2.2.1.1.24 | Gauge32 | read-only | Number of idle channels: Represents the number of idle channels at this site. |
| G32 tn9300SiteNDisabledChannels | 1.3.6.1.4.1.3570.3.6.2.2.1.1.25 | Gauge32 | read-only | Number of disabled channels: Represents the number of disabled channels at this site. |
| G32 tn9300SiteNFailedChannels | 1.3.6.1.4.1.3570.3.6.2.2.1.1.26 | Gauge32 | read-only | Number of failed channels: Represents the number of failed channels at this site. |
| G32 tn9300SiteNOnAirCalls | 1.3.6.1.4.1.3570.3.6.2.2.1.1.27 | Gauge32 | read-only | Number of on-air calls: Represents the number of calls currently on-air at this site. |
| G32 tn9300SiteNRingingCalls | 1.3.6.1.4.1.3570.3.6.2.2.1.1.28 | Gauge32 | read-only | Number of ringing calls: Represents the number of calls waiting to be answered at this site. |
| G32 tn9300SiteNQueuedCalls | 1.3.6.1.4.1.3570.3.6.2.2.1.1.29 | Gauge32 | read-only | Number of queued calls: Represents the number of calls that are queued at this site. |
| C32 tn9300SiteTotalCalls | 1.3.6.1.4.1.3570.3.6.2.2.1.1.30 | Counter32 | read-only | Total calls: Represents the total number of calls at this site since the node started. |
| C32 tn9300SiteTotalChannelCalls | 1.3.6.1.4.1.3570.3.6.2.2.1.1.31 | Counter32 | read-only | Total channel calls: Represents the total number of calls that required a traffic channel at this site since the node started. |
| C32 tn9300SiteTotalQueueTime | 1.3.6.1.4.1.3570.3.6.2.2.1.1.32 | Counter32 | read-only | Total queue time: Represents the total queue time in seconds of all calls at this site since the node started. |
| C32 tn9300SiteChannelTimeFailed | 1.3.6.1.4.1.3570.3.6.2.2.1.1.33 | Counter32 | read-only | Channel time failed: Represents the total time in seconds that channels at this site have spent in the failed state since the node started. |
| C32 tn9300SiteChannelTimeTraffic | 1.3.6.1.4.1.3570.3.6.2.2.1.1.34 | Counter32 | read-only | Channel time traffic: Represents the total time in seconds that channels at this site have spent as traffic channels since the node started. |
| C32 tn9300SiteChannelTimeControl | 1.3.6.1.4.1.3570.3.6.2.2.1.1.35 | Counter32 | read-only | Channel time control: Represents the total time in seconds that channels at this site have spent as control channels since the node started. |
| C32 tn9300SiteChannelTimeIdle | 1.3.6.1.4.1.3570.3.6.2.2.1.1.36 | Counter32 | read-only | Channel time idle: Represents the total time in seconds that channels at this site have spent in the idle state since the node started. |
| C32 tn9300SiteCallsQueuedUnder5 | 1.3.6.1.4.1.3570.3.6.2.2.1.1.37 | Counter32 | read-only | The number of calls that have been queued under 5 seconds at this site since the node started. |
| C32 tn9300SiteCallsQueued5To10 | 1.3.6.1.4.1.3570.3.6.2.2.1.1.38 | Counter32 | read-only | The number of calls that have been queued between 5 and 10 seconds at this site since the node started. |
| C32 tn9300SiteCallsQueued10To20 | 1.3.6.1.4.1.3570.3.6.2.2.1.1.39 | Counter32 | read-only | The number of calls that have been queued between 10 and 20 seconds at this site since the node started. |
| C32 tn9300SiteCallsQueuedOver20 | 1.3.6.1.4.1.3570.3.6.2.2.1.1.40 | Counter32 | read-only | The number of calls that have been queued for longer than 20 seconds at this site since the node started. |
| STR tn9300SiteAlias | 1.3.6.1.4.1.3570.3.6.2.2.1.1.41 | DisplayString | read-only | Site alias: The short name of this site. |
| T/F tn9300SiteControlChCountOk | 1.3.6.1.4.1.3570.3.6.2.2.1.1.42 | TruthValue | read-only | Indicates whether the actual number of control channel for the site matches the required. |
| G32 tn9300SiteNAlternateChannels | 1.3.6.1.4.1.3570.3.6.2.2.1.1.43 | Gauge32 | read-only | Number of alternate channels: Represents the number of channels operating as alternate channels at this site. |
| C32 tn9300SiteChannelTimeAlternate | 1.3.6.1.4.1.3570.3.6.2.2.1.1.44 | Counter32 | read-only | Channel time alternate: Represents the total time in seconds that channels at this site have spent as alternate channels since the node started. |
| tn9300ChannelTable | 1.3.6.1.4.1.3570.3.6.2.2.2 | not-accessible | This table stores the details of the channels. | |
| tn9300ChannelEntry | 1.3.6.1.4.1.3570.3.6.2.2.2.1 | not-accessible | The table entry index specification, the site number and the channel number. | |
| I32 tn9300ChannelNumber | 1.3.6.1.4.1.3570.3.6.2.2.2.1.1 | Integer32 | not-accessible | The number of this channel. |
| IPt tn9300ChannelIpAddressType | 1.3.6.1.4.1.3570.3.6.2.2.2.1.2 | InetAddressType | read-only | The type of internet address for this channel. |
| IP tn9300ChannelIpAddress | 1.3.6.1.4.1.3570.3.6.2.2.2.1.3 | InetAddress | read-only | The IP address for this channel. |
| I32 tn9300ChannelPort | 1.3.6.1.4.1.3570.3.6.2.2.2.1.4 | Integer32 | read-only | The port number of this channel. |
| I32 tn9300ChannelRf | 1.3.6.1.4.1.3570.3.6.2.2.2.1.5 | Integer32 | read-only | The radio frequency of this channel. |
| T/F tn9300ChannelEnabled | 1.3.6.1.4.1.3570.3.6.2.2.2.1.6 | TruthValue | read-only | Boolean value, true if this channel is enabled. |
| T/F tn9300ChannelControlAllowed | 1.3.6.1.4.1.3570.3.6.2.2.2.1.7 | TruthValue | read-only | Boolean value, true if this channel is allowed to become a control channel. |
| T/F tn9300ChannelTrafficAllowed | 1.3.6.1.4.1.3570.3.6.2.2.2.1.8 | TruthValue | read-only | Boolean value, true if this channel is allowed to become a traffic channel. |
| T/F tn9300ChannelInhibitIfJammed | 1.3.6.1.4.1.3570.3.6.2.2.2.1.9 | TruthValue | read-only | Boolean value, true if this channel is configured to be inhibited if it is jammed. |
| CHA tn9300ChannelState | 1.3.6.1.4.1.3570.3.6.2.2.2.1.10 | ChannelState | read-only | The state of this channel. Status types are Unknown (0), Disabled (1), Idle (2), Control (3), Traffic (4), Data (5) or Failed (6). |
| T/F tn9300ChannelJammed | 1.3.6.1.4.1.3570.3.6.2.2.2.1.11 | TruthValue | read-only | Boolean value, true if this channel is jammed. |
| T/F tn9300ChannelMinorAlarm | 1.3.6.1.4.1.3570.3.6.2.2.2.1.12 | TruthValue | read-only | Boolean value, true if this channel has a minor alarm. |
| T/F tn9300ChannelMajorAlarm | 1.3.6.1.4.1.3570.3.6.2.2.2.1.13 | TruthValue | read-only | Boolean value, true if this channel has a major alarm. |
| STR tn9300ChannelAParty | 1.3.6.1.4.1.3570.3.6.2.2.2.1.14 | DisplayString | read-only | The MPT1327 number of the A party (if a call is in progress on the channel). |
| STR tn9300ChannelBParty | 1.3.6.1.4.1.3570.3.6.2.2.2.1.15 | DisplayString | read-only | The MPT1327 number of the B party (if a call is in progress on the channel). |
| C32 tn9300ChannelBspRxPackets | 1.3.6.1.4.1.3570.3.6.2.2.2.1.16 | Counter32 | read-only | The number of BSP packets received from this channel. |
| C32 tn9300ChannelBspTxPackets | 1.3.6.1.4.1.3570.3.6.2.2.2.1.17 | Counter32 | read-only | The number of BSP packets transmitted to this channel. |
| C32 tn9300ChannelBspLostPackets | 1.3.6.1.4.1.3570.3.6.2.2.2.1.18 | Counter32 | read-only | The number of BSP packets which were lost in transmission to this channel. |
| C32 tn9300ChannelRtpRxPackets | 1.3.6.1.4.1.3570.3.6.2.2.2.1.19 | Counter32 | read-only | The number of RTP packets received from this channel. |
| C32 tn9300ChannelRtpTxPackets | 1.3.6.1.4.1.3570.3.6.2.2.2.1.20 | Counter32 | read-only | The number of RTP packets transmitted to this channel. |
| C32 tn9300ChannelRtpLostPackets | 1.3.6.1.4.1.3570.3.6.2.2.2.1.21 | Counter32 | read-only | The number of RTP packets which were lost in transmission to this channel. |
| G32 tn9300ChannelRtpRtt | 1.3.6.1.4.1.3570.3.6.2.2.2.1.22 | Gauge32 | read-only | The round trip time for RTP pings. |
| G32 tn9300ChannelRtpRttJitter | 1.3.6.1.4.1.3570.3.6.2.2.2.1.23 | Gauge32 | read-only | The round trip time jitter for RTP pings. |
| C32 tn9300ChannelTimeFailed | 1.3.6.1.4.1.3570.3.6.2.2.2.1.24 | Counter32 | read-only | The total time in seconds that this channel has spent in the failed state since the node started. |
| C32 tn9300ChannelTimeTraffic | 1.3.6.1.4.1.3570.3.6.2.2.2.1.25 | Counter32 | read-only | The total time in seconds that this channel has spent as a traffic channel since the node started. |
| C32 tn9300ChannelTimeControl | 1.3.6.1.4.1.3570.3.6.2.2.2.1.26 | Counter32 | read-only | The total time in seconds that this channel has spent as a control channel since the node started. |
| C32 tn9300ChannelTimeIdle | 1.3.6.1.4.1.3570.3.6.2.2.2.1.27 | Counter32 | read-only | The total time in seconds that this channel has spent in the idle state since the node started. |
| T/F tn9300ChannelAlternateAllowed | 1.3.6.1.4.1.3570.3.6.2.2.2.1.28 | TruthValue | read-only | Boolean value, true if this channel is allowed to become an alternate channel. |
| C32 tn9300ChannelTimeAlternate | 1.3.6.1.4.1.3570.3.6.2.2.2.1.29 | Counter32 | read-only | The total time in seconds that this channel has spent as an alternate channel since the node started. |
| I32 tn9300ChannelBaseStationNumber | 1.3.6.1.4.1.3570.3.6.2.2.2.1.99 | Integer32 | not-accessible | The number of the base station this channel belongs to. |
| tn9300AdjacentSiteTable | 1.3.6.1.4.1.3570.3.6.2.2.5 | not-accessible | This table stores the details of the adjacent sites. | |
| tn9300AdjacentSiteEntry | 1.3.6.1.4.1.3570.3.6.2.2.5.1 | not-accessible | The table entry index specification, the site number and the adjacent site number. | |
| I32 tn9300AdjSiteSendOrder | 1.3.6.1.4.1.3570.3.6.2.2.5.1.1 | Integer32 | not-accessible | The send order of this adjacent site. |
| STR tn9300AdjSiteAlias | 1.3.6.1.4.1.3570.3.6.2.2.5.1.2 | DisplayString | read-only | Site alias: The short name of this site. |
| STR tn9300AdjSiteSyscode1 | 1.3.6.1.4.1.3570.3.6.2.2.5.1.3 | DisplayString | read-only | Adjacent Site Syscode1: Represents the first syscode of a this adjacent control channel. Used for a cell extender. |
| I32 tn9300AdjSiteRF1 | 1.3.6.1.4.1.3570.3.6.2.2.5.1.4 | Integer32 | read-only | Adjacent Site RF1: Represents the first RF number of this adjacent control channel. Used for a cell extender. |
| STR tn9300AdjSiteSyscode2 | 1.3.6.1.4.1.3570.3.6.2.2.5.1.5 | DisplayString | read-only | Adjacent Site Syscode2: Represents the second syscode of a this adjacent control channel. Used for a cell extender. |
| I32 tn9300AdjSiteRF2 | 1.3.6.1.4.1.3570.3.6.2.2.5.1.6 | Integer32 | read-only | Adjacent Site RF2: Represents the second RF number of this adjacent control channel. Used for a cell extender. |
| tn9300SipLineObjs | 1.3.6.1.4.1.3570.3.6.2.3 | |||
| tn9300SipLineTable | 1.3.6.1.4.1.3570.3.6.2.3.1 | not-accessible | This table stores the details of the SIP lines. | |
| tn9300SipLineEntry | 1.3.6.1.4.1.3570.3.6.2.3.1.1 | not-accessible | The table entry index specification, the SIP line number. | |
| I32 tn9300SipLineNumber | 1.3.6.1.4.1.3570.3.6.2.3.1.1.1 | Integer32 | not-accessible | SIP line number: The number of this SIP line. |
| STR tn9300SipLineName | 1.3.6.1.4.1.3570.3.6.2.3.1.1.2 | DisplayString | read-only | SIP line name: The name of this SIP line. |
| SIP tn9300SipLineRegistrationType | 1.3.6.1.4.1.3570.3.6.2.3.1.1.3 | SipLineRegistrationType | read-only | SIP line type: The registration type configured on this SIP line. Registration types are Unknown (0), Outbound (1), Inbound (2) or AIS (3). |
| STR tn9300SipLineUserName | 1.3.6.1.4.1.3570.3.6.2.3.1.1.4 | DisplayString | read-only | SIP line user name: The user name of this SIP line. |
| T/F tn9300SipLineEnabled | 1.3.6.1.4.1.3570.3.6.2.3.1.1.5 | TruthValue | read-only | Enabled: Boolean value, true if this SIP line is enabled. |
| SIP tn9300SipLineSpchVotePri | 1.3.6.1.4.1.3570.3.6.2.3.1.1.6 | SipCallSpeechVotingPriority | read-only | SIP line speech voting priority: Priorities are Unknown (0), Normal (1) or Override (2). |
| T/F tn9300SipLineAisMultipartContents | 1.3.6.1.4.1.3570.3.6.2.3.1.1.7 | TruthValue | read-only | Multipart contents on AIS INVITE message: Boolean value, true if the multipart contents are supported. |
| T/F tn9300SipLineAisMonitor | 1.3.6.1.4.1.3570.3.6.2.3.1.1.8 | TruthValue | read-only | Registration of AIS call monitor: Boolean value, true if an AIS console is permitted to register as a call monitor. |
| STR tn9300SipLineSipGroup | 1.3.6.1.4.1.3570.3.6.2.3.1.1.9 | DisplayString | read-only | SIP group name: The SIP group name for this SIP line. |
| STR tn9300SipLineInphoneTable | 1.3.6.1.4.1.3570.3.6.2.3.1.1.10 | DisplayString | read-only | Inphone table name: The Inphone table name for this SIP line. |
| SIP tn9300SipLineIncomingType | 1.3.6.1.4.1.3570.3.6.2.3.1.1.11 | SipLineIncomingType | read-only | SIP line A party ID: The ident of the A party for incoming calls on this SIP line (if any). Ident types are Unknown (0), PSTNI (1) or PABXI (2). |
| IPt tn9300SipLineProxyAddressType | 1.3.6.1.4.1.3570.3.6.2.3.1.1.12 | InetAddressType | read-only | SIP line outgoing proxy IP address type: The type of internet address for the outgoing proxy used by this SIP line. |
| IP tn9300SipLineProxyAddress | 1.3.6.1.4.1.3570.3.6.2.3.1.1.13 | InetAddress | read-only | SIP line outgoing proxy IP address: The IP address for the outgoing proxy used by this SIP line. |
| IPt tn9300SipLineIpAddressType | 1.3.6.1.4.1.3570.3.6.2.3.1.1.14 | InetAddressType | read-only | SIP gateway IP address type: The type of internet address for the SIP gateway connected this SIP line. |
| IP tn9300SipLineIpAddress | 1.3.6.1.4.1.3570.3.6.2.3.1.1.15 | InetAddress | read-only | SIP gateway IP address: The IP address of the SIP gateway connected by this SIP line. |
| SIP tn9300SipLineState | 1.3.6.1.4.1.3570.3.6.2.3.1.1.16 | SipLineState | read-only | SIP line state: The state in which this SIP line is operating. Status types are Unknown (0), Disabled (1), Up (2) or Down (3). |
| C32 tn9300SipLineUptime | 1.3.6.1.4.1.3570.3.6.2.3.1.1.17 | Counter32 | read-only | SIP line uptime: The length of time (in days hh:mm:ss) that the connection between the SIP gateway and the node has been established since its last reset. |
| C32 tn9300SipLineConnects | 1.3.6.1.4.1.3570.3.6.2.3.1.1.18 | Counter32 | read-only | SIP line connects: The number of times that the connection between the node and the SIP gateway has been re-established. |
| C32 tn9300SipLineCalls | 1.3.6.1.4.1.3570.3.6.2.3.1.1.19 | Counter32 | read-only | SIP line calls: The number of calls in progress on the SIP line. |
| tn9300DipLineObjs | 1.3.6.1.4.1.3570.3.6.2.4 | |||
| tn9300DipLineTable | 1.3.6.1.4.1.3570.3.6.2.4.1 | not-accessible | This table stores the details of the DIP connection channels. | |
| tn9300DipLineEntry | 1.3.6.1.4.1.3570.3.6.2.4.1.1 | not-accessible | The table entry index specification, the DIP connection channel number. | |
| I32 tn9300DipLineNumber | 1.3.6.1.4.1.3570.3.6.2.4.1.1.1 | Integer32 | not-accessible | DIP connection number: The number of this DIP connection. |
| STR tn9300DipLineName | 1.3.6.1.4.1.3570.3.6.2.4.1.1.2 | DisplayString | read-only | DIP connection name: The name of this DIP connection. |
| IPt tn9300DipLineNgwIpAddrType | 1.3.6.1.4.1.3570.3.6.2.4.1.1.3 | InetAddressType | read-only | DIP connection NGW IP address type: The type of internet address for the network gateway used by this DIP connection. |
| IP tn9300DipLineNgwIpAddr | 1.3.6.1.4.1.3570.3.6.2.4.1.1.4 | InetAddress | read-only | DIP connection NGW IP address: The IP address of the network gateway used by this DIP connection. |
| STR tn9300DipLineAddress | 1.3.6.1.4.1.3570.3.6.2.4.1.1.5 | DisplayString | read-only | DIP connection Address: The MPT1327 address used for this DIP connection. |
| STR tn9300DipLinePilotAddress | 1.3.6.1.4.1.3570.3.6.2.4.1.1.6 | DisplayString | read-only | DIP connection Address: The MPT1327 pilot address used for this DIP connection. |
| SIP tn9300DipLineSpchVotePri | 1.3.6.1.4.1.3570.3.6.2.4.1.1.7 | SipCallSpeechVotingPriority | read-only | DIP connection speech voting priority: How the node's packet switch handles incoming speech from the DIP connection. Unknown (0). Normal (1) - speech is handled in the same way as speech from a radio. Override (2) - speech will pre-empt existing speech from a radio, the dispatcher can interrupt any radio in a group call. |
| DIP tn9300DipLineState | 1.3.6.1.4.1.3570.3.6.2.4.1.1.8 | DipLineState | read-only | DIP connection state: The state in which this DIP connection is operating. Status types are Unknown (0), Unconfigured (1), Idle (2), Active (3) or Failed (4). |
| NGW tn9300DipLineNgwLinkState | 1.3.6.1.4.1.3570.3.6.2.4.1.1.9 | NgwLinkState | read-only | DIP connection NGW link state: The state of the link between this DIP connection and its associated network gateway. Status types are Unknown (0), OK (1) or Failed (2). |
| STR tn9300DipLineAParty | 1.3.6.1.4.1.3570.3.6.2.4.1.1.10 | DisplayString | read-only | DIP connection A party: The MPT1327 number of the A party (if a call is in progress on this DIP connection). |
| STR tn9300DipLineBParty | 1.3.6.1.4.1.3570.3.6.2.4.1.1.11 | DisplayString | read-only | DIP connection channel B party: The MPT1327 number of the B party (if a call is in progress on this DIP connection). |
| IPt tn9300DipLnClientIpAddrType | 1.3.6.1.4.1.3570.3.6.2.4.1.1.12 | InetAddressType | read-only | DIP connection client IP address type: The type of internet address for the client connected to this DIP connection. |
| IP tn9300DipLnClientIpAddr | 1.3.6.1.4.1.3570.3.6.2.4.1.1.13 | InetAddress | read-only | DIP connection client IP address: The IP address of the client connected to this DIP connection. |
| C32 tn9300DipLineClientUptime | 1.3.6.1.4.1.3570.3.6.2.4.1.1.14 | Counter32 | read-only | DIP connection client uptime: The time that the client has been connected to this DIP connection. |
| C32 tn9300DipLineClientConnects | 1.3.6.1.4.1.3570.3.6.2.4.1.1.15 | Counter32 | read-only | DIP connection client connects: The number of client connections on this DIP connection since this node was last started. |
| C32 tn9300DipLineNgpRxPackets | 1.3.6.1.4.1.3570.3.6.2.4.1.1.16 | Counter32 | read-only | DIP connection NGP rx packets: The number of NGP packets received on this DIP connection from its associated network gateway. |
| C32 tn9300DipLineNgpTxPackets | 1.3.6.1.4.1.3570.3.6.2.4.1.1.17 | Counter32 | read-only | DIP connection NGP tx packets: The number of NGP packets transmitted from this DIP connection to its associated network gateway. |
| C32 tn9300DipLineNgpLostPackets | 1.3.6.1.4.1.3570.3.6.2.4.1.1.18 | Counter32 | read-only | DIP connection NGP lost packets: The number of NGP packets lost in transmission from this DIP connection to its associated network gateway. |
| C32 tn9300DipLineRtpRxPackets | 1.3.6.1.4.1.3570.3.6.2.4.1.1.19 | Counter32 | read-only | DIP connection RTP rx packets: The number of RTP packets received on this DIP connection from its associated network gateway. |
| C32 tn9300DipLineRtpTxPackets | 1.3.6.1.4.1.3570.3.6.2.4.1.1.20 | Counter32 | read-only | DIP connection RTP tx packets: The number of RTP packets transmitted from this DIP connection to its associated network gateway. |
| C32 tn9300DipLineRtpLostPackets | 1.3.6.1.4.1.3570.3.6.2.4.1.1.21 | Counter32 | read-only | DIP connection RTP lost packets: The number of RTP packets lost in transmission from this DIP connection to its associated network gateway. |
| G32 tn9300DipLineRtpRtt | 1.3.6.1.4.1.3570.3.6.2.4.1.1.22 | Gauge32 | read-only | DIP connection RTP round trip time: The round trip time for RTP pings between this DIP connection and its associated network gateway. |
| G32 tn9300DipLineRtpJitter | 1.3.6.1.4.1.3570.3.6.2.4.1.1.23 | Gauge32 | read-only | DIP connection RTP round trip time jitter: The round trip time jitter for RTP pings between this DIP connection and its associated network gateway. |
| tn9300Mpt1327Objs | 1.3.6.1.4.1.3570.3.6.2.5 | |||
| IPt tn9300Mpt1327IpAddressType | 1.3.6.1.4.1.3570.3.6.2.5.1 | InetAddressType | read-only | The type of internet address for the MPT1327 Gateway. |
| IP tn9300Mpt1327IpAddress | 1.3.6.1.4.1.3570.3.6.2.5.2 | InetAddress | read-only | The IP address of the MPT1327 Gateway. |
| I32 tn9300Mpt1327Port | 1.3.6.1.4.1.3570.3.6.2.5.3 | Integer32 | read-only | The port number for the MPT1327 Gateway. |
| MPT tn9300Mpt1327State | 1.3.6.1.4.1.3570.3.6.2.5.4 | Mpt1327LinkState | read-only | The state in which the MPT1327 gateway is operating. Status types are Unknown (0), OK (1) or Failed (2). |
| C32 tn9300Mpt1327RxBytesEx | 1.3.6.1.4.1.3570.3.6.2.5.5 | Counter32 | read-only | The number of bytes received from the MPT1327 Gateway. |
| C32 tn9300Mpt1327TxBytes | 1.3.6.1.4.1.3570.3.6.2.5.6 | Counter32 | read-only | The number of bytes transmitted to the MPT1327 Gateway. |
| C32 tn9300Mpt1327LinkErrors | 1.3.6.1.4.1.3570.3.6.2.5.7 | Counter32 | read-only | The number of errors detected on the link to the MPT1327 Gateway. |
| C32 tn9300Mpt1327Connections | 1.3.6.1.4.1.3570.3.6.2.5.8 | Counter32 | read-only | The number of connections established to the MPT1327 Gateway. |
| tn9300Mpt1327ChObjs | 1.3.6.1.4.1.3570.3.6.2.6 | |||
| tn9300Mpt1327ChTable | 1.3.6.1.4.1.3570.3.6.2.6.1 | not-accessible | This table stores the details of the MPT1327 gateway channels. | |
| tn9300Mpt1327ChEntry | 1.3.6.1.4.1.3570.3.6.2.6.1.1 | not-accessible | The table entry index specification, the MPT1327 gateway channel number. | |
| I32 tn9300Mpt1327ChNumber | 1.3.6.1.4.1.3570.3.6.2.6.1.1.1 | Integer32 | not-accessible | MPT1327 gateway channel number: The number of this channel. |
| IPt tn9300Mpt1327ChIpAddressType | 1.3.6.1.4.1.3570.3.6.2.6.1.1.2 | InetAddressType | read-only | MPT1327 gateway channel IP address type: The type of internet address for the network gateway used by this channel. |
| IP tn9300Mpt1327ChIpAddress | 1.3.6.1.4.1.3570.3.6.2.6.1.1.3 | InetAddress | read-only | MPT1327 gateway channel IP address: The IP address of the network gateway used by this channel. |
| I32 tn9300Mpt1327ChPort | 1.3.6.1.4.1.3570.3.6.2.6.1.1.4 | Integer32 | read-only | MPT1327 gateway channel port: The port on the network gateway used by this channel. |
| MPT tn9300Mpt1327ChState | 1.3.6.1.4.1.3570.3.6.2.6.1.1.5 | Mpt1327ChannelState | read-only | MPT1327 gateway channel state: The state in which this channel is operating. Status types are Unknown (0), Idle (1), Traffic (2), Control (3) or Failed (4). |
| NGW tn9300Mpt1327ChLinkState | 1.3.6.1.4.1.3570.3.6.2.6.1.1.6 | NgwLinkState | read-only | MPT1327 gateway channel link state: The state of the link between this channel and its associated network gateway. Status types are Unknown (0), OK (1) or Failed (2). |
| STR tn9300Mpt1327ChAParty | 1.3.6.1.4.1.3570.3.6.2.6.1.1.7 | DisplayString | read-only | MPT1327 gateway channel A party: The MPT1327 number of the A party (if a call is in progress on this channel). |
| STR tn9300Mpt1327ChBParty | 1.3.6.1.4.1.3570.3.6.2.6.1.1.8 | DisplayString | read-only | MPT1327 gateway channel B party: The MPT1327 number of the B party (if a call is in progress on this channel). |
| C32 tn9300Mpt1327ChNgpRxPackets | 1.3.6.1.4.1.3570.3.6.2.6.1.1.9 | Counter32 | read-only | MPT1327 gateway channel NGP rx packets: The number of NGP packets received on this channel from its associated network gateway. |
| C32 tn9300Mpt1327ChNgpTxPackets | 1.3.6.1.4.1.3570.3.6.2.6.1.1.10 | Counter32 | read-only | MPT1327 gateway channel NGP tx packets: The number of NGP packets transmitted from this channel to its associated network gateway. |
| C32 tn9300Mpt1327ChNgpLostPackets | 1.3.6.1.4.1.3570.3.6.2.6.1.1.11 | Counter32 | read-only | MPT1327 gateway channel NGP lost packets: The number of NGP packets lost in transmission from this channel to its associated network gateway. |
| C32 tn9300Mpt1327ChRtpRxPackets | 1.3.6.1.4.1.3570.3.6.2.6.1.1.12 | Counter32 | read-only | MPT1327 gateway channel RTP rx packets: The number of RTP packets received on this channel from its associated network gateway. |
| C32 tn9300Mpt1327ChRtpTxPackets | 1.3.6.1.4.1.3570.3.6.2.6.1.1.13 | Counter32 | read-only | MPT1327 gateway channel RTP tx packets: The number of RTP packets transmitted from this channel to its associated network gateway. |
| C32 tn9300Mpt1327ChRtpLostPackets | 1.3.6.1.4.1.3570.3.6.2.6.1.1.14 | Counter32 | read-only | MPT1327 gateway channel RTP lost packets: The number of RTP packets lost in transmission from this channel to its associated network gateway. |
| G32 tn9300Mpt1327ChRtpRtt | 1.3.6.1.4.1.3570.3.6.2.6.1.1.15 | Gauge32 | read-only | MPT1327 gateway channel RTP round trip time: The round trip time for RTP pings. |
| G32 tn9300Mpt1327ChRtpJitter | 1.3.6.1.4.1.3570.3.6.2.6.1.1.16 | Gauge32 | read-only | MPT1327 gateway channel RTP round trip time jitter: The round trip time jitter for RTP pings. |
| tn9300RemoteNodeObjs | 1.3.6.1.4.1.3570.3.6.2.7 | |||
| tn9300RemoteNodeTable | 1.3.6.1.4.1.3570.3.6.2.7.1 | not-accessible | This table stores the details of the remote nodes. | |
| tn9300RemoteNodeEntry | 1.3.6.1.4.1.3570.3.6.2.7.1.1 | not-accessible | The table entry index specification, the node number. | |
| I32 tn9300RemoteNodeNumber | 1.3.6.1.4.1.3570.3.6.2.7.1.1.1 | Integer32 | not-accessible | Remote node number: The number of this remote node. |
| STR tn9300RemoteNodeName | 1.3.6.1.4.1.3570.3.6.2.7.1.1.2 | DisplayString | read-only | Remote node name. |
| IPt tn9300RemoteNodeIpAddrType | 1.3.6.1.4.1.3570.3.6.2.7.1.1.3 | InetAddressType | read-only | Remote node IP address type: The type of internet address for this remote node. |
| IP tn9300RemoteNodeIpAddr | 1.3.6.1.4.1.3570.3.6.2.7.1.1.4 | InetAddress | read-only | Remote node IP address: The IP address of this remote node. |
| I32 tn9300RemoteNodePriority | 1.3.6.1.4.1.3570.3.6.2.7.1.1.5 | Integer32 | read-only | Remote node priority. |
| REM tn9300RemoteNodeState | 1.3.6.1.4.1.3570.3.6.2.7.1.1.6 | RemoteNodeState | read-only | Remote node state: The state in which the this remote node is operating. Status types are Unknown (0), Offline (1), Program (2), Switching (3), Control (4), Failed (5) or Graceful Shutdown (6). |
| G32 tn9300RemoteNodeCallSw | 1.3.6.1.4.1.3570.3.6.2.7.1.1.7 | Gauge32 | read-only | Number of calls being switched on this remote node. |
| G32 tn9300RemoteNodeConnectSw | 1.3.6.1.4.1.3570.3.6.2.7.1.1.8 | Gauge32 | read-only | Number of connections being switched on this remote node. |
| REM tn9300RemoteNodeSynced | 1.3.6.1.4.1.3570.3.6.2.7.1.1.9 | RemoteNodeSyncState | read-only | The state of synchronisation between the control and a remote node. Types are OK (0), Failed (1), Unknown (2), or None (3). |
| tn9300MobileIpObjs | 1.3.6.1.4.1.3570.3.6.2.8 | |||
| I32 tn9300MipRegistered | 1.3.6.1.4.1.3570.3.6.2.8.1 | Integer32 | read-only | The number of units registered on the mobile home agent. |
| I32 tn9300MipFailing | 1.3.6.1.4.1.3570.3.6.2.8.2 | Integer32 | read-only | The number of units failing to register on the mobile home agent. |
| C32 tn9300MipTimeouts | 1.3.6.1.4.1.3570.3.6.2.8.3 | Counter32 | read-only | The number of home agent registration timeouts that have occured. |
| C32 tn9300MipRejections | 1.3.6.1.4.1.3570.3.6.2.8.4 | Counter32 | read-only | The number of home agent registration rejections that have occured. |
| C32 tn9300MipIcmpRxPackets | 1.3.6.1.4.1.3570.3.6.2.8.5 | Counter32 | read-only | The number of ICMP packets that have been received over mobile IP. |
| C32 tn9300MipIcmpTxPackets | 1.3.6.1.4.1.3570.3.6.2.8.6 | Counter32 | read-only | The number of ICMP packets that have been sent over mobile IP. |
| C32 tn9300MipUdpRxPackets | 1.3.6.1.4.1.3570.3.6.2.8.7 | Counter32 | read-only | The number of UDP packets that have been received over mobile IP. |
| C32 tn9300MipUdpTxPackets | 1.3.6.1.4.1.3570.3.6.2.8.8 | Counter32 | read-only | The number of UDP packets that have been sent over mobile IP. |
| C32 tn9300MipRxBytes | 1.3.6.1.4.1.3570.3.6.2.8.9 | Counter32 | read-only | The number of bytes that have been received over mobile IP. |
| C32 tn9300MipTxBytes | 1.3.6.1.4.1.3570.3.6.2.8.10 | Counter32 | read-only | The number of bytes that have been sent over mobile IP. |
| tn9300UnitObjs | 1.3.6.1.4.1.3570.3.6.2.9 | |||
| tn9300UnitTable | 1.3.6.1.4.1.3570.3.6.2.9.1 | not-accessible | This table stores the details of the units. | |
| tn9300UnitEntry | 1.3.6.1.4.1.3570.3.6.2.9.1.1 | not-accessible | The table entry index specification, the unit address. | |
| I32 tn9300UnitAddress | 1.3.6.1.4.1.3570.3.6.2.9.1.1.1 | Integer32 | not-accessible | Unit address: The unit number, in the format of the DMR raw address. |
| STR tn9300UnitAlias | 1.3.6.1.4.1.3570.3.6.2.9.1.1.2 | DisplayString | read-only | Unit alias: a 7 bit ASCII character unique identifier. |
| UNI tn9300UnitAuthentication | 1.3.6.1.4.1.3570.3.6.2.9.1.1.3 | UnitAuthentication | read-only | The authentication state of a unit. Types are as follows: Not Polled (0), Polling (1), Not Home (2), Busy (3), Bad Authentication (4), Bad CRC Received (5), Good Authentication Received (6), Rejected (7), Not Registered (8) |
| UNI tn9300UnitStatusMessageId | 1.3.6.1.4.1.3570.3.6.2.9.2 | UnitStatusMessageId | accessible-for-notify | Unit alarm status message IDs: PPP link to MPC down (1), GPS signal lost (2), GPS signal regained (after loss) (3), Unit antenna connection failure (VSWR out of range) (4), Unit supply voltage out of range (5), Unit temperature T0 (normal range) (6), Unit temperature T1 (over temp) (7), Unit temperature T2 (over temp) (8), Unit temperature T3 (over temp) (9), Unit loss of service (10), Radio frequency out of lock (service regained) (11), MCP configuration error (12) |
| tn9300NetworkGwObjs | 1.3.6.1.4.1.3570.3.6.2.10 | |||
| tn9300NetworkGwTable | 1.3.6.1.4.1.3570.3.6.2.10.1 | not-accessible | This table stores the details of network gateways. | |
| tn9300NetworkGwEntry | 1.3.6.1.4.1.3570.3.6.2.10.1.1 | not-accessible | The table entry index specification, the network gateway ID. | |
| I32 tn9300NetworkGwId | 1.3.6.1.4.1.3570.3.6.2.10.1.1.1 | Integer32 | not-accessible | The ID of a network gateway. |
| T/F tn9300NetworkGwConnOk | 1.3.6.1.4.1.3570.3.6.2.10.1.1.2 | TruthValue | accessible-for-notify | Indicates whether the network gateway connection is up or not. |
| IPt tn9300NetworkGwIpAddrType | 1.3.6.1.4.1.3570.3.6.2.10.1.1.3 | InetAddressType | accessible-for-notify | The type of internet address for this network gateway. |
| IP tn9300NetworkGwIpAddr | 1.3.6.1.4.1.3570.3.6.2.10.1.1.4 | InetAddress | accessible-for-notify | The IP address for this network gateway. |
| tn9300EventObjs | 1.3.6.1.4.1.3570.3.6.2.99 | |||
| EVE tn9300EventSeverity | 1.3.6.1.4.1.3570.3.6.2.99.2 | EventSeverity | accessible-for-notify | The severity of an event. Types are OK (0), Minor (1), or Major (2). |
| I32 tn9300EventUnitAddress | 1.3.6.1.4.1.3570.3.6.2.99.3 | Integer32 | accessible-for-notify | The unit number, in the format of the DMR raw address. Corresponds to tn9300UnitAddress. |
| I32 tn9300EventBaseStationNumber | 1.3.6.1.4.1.3570.3.6.2.99.4 | Integer32 | accessible-for-notify | The number of the base station the channel belongs to. Corresponds to tn9300ChannelBaseStationNumber. |
| I32 tn9300EventChannelNumber | 1.3.6.1.4.1.3570.3.6.2.99.5 | Integer32 | accessible-for-notify | The number of this channel. Corresponds to tn9300ChannelNumber. |
| I32 tn9300EventNetworkGwId | 1.3.6.1.4.1.3570.3.6.2.99.6 | Integer32 | accessible-for-notify | The ID of this network gateway. Corresponds to tn9300NetworkGwId. |
| tn9300Events | 1.3.6.1.4.1.3570.3.6.3 | |||
| tn9300EventsV2 | 1.3.6.1.4.1.3570.3.6.3.0 | |||
| NTF tn9300NodeActivationEvent | 1.3.6.1.4.1.3570.3.6.3.0.1 | Node activated: The node has entered the active state. | ||
| NTF tn9300SiteFailureEvent | 1.3.6.1.4.1.3570.3.6.3.0.2 | Site failure: A site has failed. | ||
| NTF tn9300SiteOkEvent | 1.3.6.1.4.1.3570.3.6.3.0.3 | Site OK: A site has recovered. | ||
| NTF tn9300ChannelMinorAlarmEvent | 1.3.6.1.4.1.3570.3.6.3.0.4 | Channel minor alarm: A channel has raised a minor alarm. | ||
| NTF tn9300ChannelMajorAlarmEvent | 1.3.6.1.4.1.3570.3.6.3.0.5 | Channel major alarm: A channel has raised a major alarm. | ||
| NTF tn9300ChannelFailureEvent | 1.3.6.1.4.1.3570.3.6.3.0.6 | Channel failure: A channel has failed. | ||
| NTF tn9300ChannelOkEvent | 1.3.6.1.4.1.3570.3.6.3.0.7 | Channel OK: A channel has recovered. | ||
| NTF tn9300ChannelJammedEvent | 1.3.6.1.4.1.3570.3.6.3.0.8 | A channel is jammed. | ||
| NTF tn9300ChannelUnjammedEvent | 1.3.6.1.4.1.3570.3.6.3.0.9 | A channel is no longer jammed. | ||
| NTF tn9300SipLinkUpEvent | 1.3.6.1.4.1.3570.3.6.3.0.14 | SIP link up. | ||
| NTF tn9300SipLinkDownEvent | 1.3.6.1.4.1.3570.3.6.3.0.15 | SIP link down. | ||
| NTF tn9300DipLinkUpEvent | 1.3.6.1.4.1.3570.3.6.3.0.16 | DIP link up. | ||
| NTF tn9300DipLinkDownEvent | 1.3.6.1.4.1.3570.3.6.3.0.17 | DIP link down. | ||
| NTF tn9300ControlChannelEvent | 1.3.6.1.4.1.3570.3.6.3.0.18 | Too few control channels: The number of control channels at a site is less than required. | ||
| NTF tn9300NetworkErrorEvent | 1.3.6.1.4.1.3570.3.6.3.0.19 | One or both of the network checks failed. | ||
| NTF tn9300RemoteNodeUpEvent | 1.3.6.1.4.1.3570.3.6.3.0.20 | A remote node is up. | ||
| NTF tn9300RemoteNodeDownEvent | 1.3.6.1.4.1.3570.3.6.3.0.21 | A remote node is down. | ||
| NTF tn9300LowDiskSpaceEvent | 1.3.6.1.4.1.3570.3.6.3.0.22 | The node is low on available disk space. | ||
| NTF tn9300LicenseCheckFailedEvent | 1.3.6.1.4.1.3570.3.6.3.0.23 | The node does not have a valid license installed. | ||
| NTF tn9300NetworkGatewayUpEvent | 1.3.6.1.4.1.3570.3.6.3.0.24 | A network gateway connection has been established. | ||
| NTF tn9300NetworkGatewayDownEvent | 1.3.6.1.4.1.3570.3.6.3.0.25 | A network gateway has been disconnected. | ||
| NTF tn9300NodeFailedEvent | 1.3.6.1.4.1.3570.3.6.3.0.26 | All network checks have failed. | ||
| NTF tn9300NetworkUpEvent | 1.3.6.1.4.1.3570.3.6.3.0.27 | A network check has succeeded. | ||
| NTF tn9300AuthenticationOkEvent | 1.3.6.1.4.1.3570.3.6.3.0.28 | A radio has passed an authentication check. | ||
| NTF tn9300AuthenticationFailureEvent | 1.3.6.1.4.1.3570.3.6.3.0.29 | A radio has failed an authentication check. | ||
| NTF tn9300UnitStatusMessageEvent | 1.3.6.1.4.1.3570.3.6.3.0.30 | Terminal alarm notification (UnitStatusMessageId) from . Terminal alarm status message IDs: PPP link to MPC down (1), GPS signal lost (2), GPS signal regained (after loss) (3), Terminal antenna connection failure (VSWR out of range) (4), Terminal supply voltage out of range (5), Terminal temperature T0 (normal range) (6), Terminal temperature T1 (over temp) (7), Terminal temperature T2 (over temp) (8), Terminal temperature T3 (over temp) (9), Terminal loss of service (10), Radio frequency out of lock (service regained) (11), MCP configuration error (12), Terminal antenna connection good (13), Terminal unsolicited reset (14), Terminal gained service (15) | ||
| NTF tn9300RemoteNodeSyncFailedEvent | 1.3.6.1.4.1.3570.3.6.3.0.31 | A remote node database is out of sync. | ||
| NTF tn9300RemoteNodeSyncOkEvent | 1.3.6.1.4.1.3570.3.6.3.0.32 | A remote node database is synced with this node. | ||
| NTF tn9300UnitDeregisteredBySystemEvent | 1.3.6.1.4.1.3570.3.6.3.0.33 | A unit was deregistered by system (timed-out). | ||
| NTF tn9300NodeStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.34 | The node has changed state. | ||
| NTF tn9300NodeIpNetworkStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.35 | At least one of the network check results have changed. | ||
| NTF tn9300NodeDiskSpaceEvent | 1.3.6.1.4.1.3570.3.6.3.0.36 | The available disk space has either went below or above threshold. | ||
| NTF tn9300NodeLicenseEvent | 1.3.6.1.4.1.3570.3.6.3.0.37 | The validity of the license has changed. | ||
| NTF tn9300SiteStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.38 | A site has changed state. | ||
| NTF tn9300SiteControlChCountEvent | 1.3.6.1.4.1.3570.3.6.3.0.39 | The number of control channels for a site has either went below or equal the required. | ||
| NTF tn9300BSMinorAlarmStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.40 | A base station's minor alarm state has changed. | ||
| NTF tn9300BSMajorAlarmStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.41 | A base station's major alarm state has changed. | ||
| NTF tn9300BSStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.42 | A base station has changed state. | ||
| NTF tn9300ChannelJammedStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.43 | A channel's jammed state has changed. | ||
| NTF tn9300ChannelStuckMuteEvent | 1.3.6.1.4.1.3570.3.6.3.0.44 | A channel has reached its site's open mute timeout. | ||
| NTF tn9300SipLinkStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.45 | A SIP link has changed state. | ||
| NTF tn9300DipLinkStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.46 | A DIP link has changed state. | ||
| NTF tn9300RemoteNodeStateEvent | 1.3.6.1.4.1.3570.3.6.3.0.47 | A remote node has changed state. | ||
| NTF tn9300RemoteNodeSyncEvent | 1.3.6.1.4.1.3570.3.6.3.0.48 | A remote node's sync state has changed. | ||
| NTF tn9300NetworkGwConnEvent | 1.3.6.1.4.1.3570.3.6.3.0.49 | A network gateway has changed state. | ||
| NTF tn9300UnitAuthenticationEvent | 1.3.6.1.4.1.3570.3.6.3.0.50 | A unit's authentication state has changed. | ||
| NTF tn9300UnitStatusMsgEvent | 1.3.6.1.4.1.3570.3.6.3.0.51 | A status message from a unit was received. | ||
| NTF tn9300UnitRegTimeoutEvent | 1.3.6.1.4.1.3570.3.6.3.0.52 | A unit has reached the registration time limit and was deregistered by the system. | ||
| tn9300ObjectsForEvents | 1.3.6.1.4.1.3570.3.6.3.99 | |||
| tn9300CgmMIB | 1.3.6.1.4.1.3570.3.6.4 |
RFC description
Tait TN9300 professional radio system MIB managing RF communications equipment and related network interfaces.
Start monitoring Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.