TAIT-TN9300-MIB :: tn9300UnitStatusMessageEvent

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TAIT-TN9300-MIB › tn9300UnitStatusMessageEvent

tn9300UnitStatusMessageEvent

Module: TAIT-TN9300-MIB

OID (symbolic): TAIT-TN9300-MIB::tn9300UnitStatusMessageEvent

OID (numeric): 1.3.6.1.4.1.3570.3.6.3.0.30

Node type: NOTIFICATION-TYPE

Description: Terminal alarm notification (UnitStatusMessageId) from . Terminal alarm status message IDs: PPP link to MPC down (1), GPS signal lost (2), GPS signal regained (after loss) (3), Terminal antenna connection failure (VSWR out of range) (4), Terminal supply voltage out of range (5), Terminal temperature T0 (normal range) (6), Terminal temperature T1 (over temp) (7), Terminal temperature T2 (over temp) (8), Terminal temperature T3 (over temp) (9), Terminal loss of service (10), Radio frequency out of lock (service regained) (11), MCP configuration error (12), Terminal antenna connection good (13), Terminal unsolicited reset (14), Terminal gained service (15)

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' TAIT-TN9300-MIB::tn9300UnitStatusMessageEvent
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.3570.3.6.3.0.30

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:51179->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (103568875) 11 days, 23:41:28.75
  SNMPv2-MIB::snmpTrapOID.0 = OID: TAIT-TN9300-MIB::tn9300UnitStatusMessageEvent

Start monitoring Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TAIT-TN9300-MIB::tn9300UnitStatusMessageEvent OID value, configure state conditions and alerts, and monitor any Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3570taitTAIT-COMMON-MIB
1.3.6.1.4.1.3570.3taitProductsTAIT-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3570.3.6tn9300MIBTAIT-TN9300-MIB
1.3.6.1.4.1.3570.3.6.3tn9300EventsTAIT-TN9300-MIB
1.3.6.1.4.1.3570.3.6.3.0tn9300EventsV2TAIT-TN9300-MIB
1.3.6.1.4.1.3570.3.6.3.0.30tn9300UnitStatusMessageEventTAIT-TN9300-MIB

Module

This MIB depends on