All MIBs › TAIT-TN9300-MIB › tn9300SiteCCReassignTimeout
tn9300SiteCCReassignTimeout
Module: TAIT-TN9300-MIB
OID (symbolic): TAIT-TN9300-MIB::tn9300SiteCCReassignTimeout
OID (numeric): 1.3.6.1.4.1.3570.3.6.2.2.1.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Control Channel Reassignment Timeout: Represents the time (in minutes), between switching the control channel from one channel to another.
Control channel reassignment should be used only when there is a compelling (i.e. regulatory) reason to move the control channel at intervals.
If this feature is used it is recommended that jammed channels are inhibited from becoming control channels.
If set to 0, the lowest numbered, uninhibited channel becomes the control channel and remains so unless it fails. If it fails the node will reassign the next lowest numbered channel.
Immediately before reassignment, the control channel issues a MOVE command to all radios to transfer them to the new control channel frequency.
What is tn9300SiteCCReassignTimeout?
The time in minutes between automatic control-channel reassignments at this site; 0 disables rotation and the lowest-numbered uninhibited channel stays the control channel unless it fails. Per the source description this should only be used for regulatory reasons, and jammed channels should be inhibited from becoming control channels when it's enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3570.3.6.2.2.1.1.10 snmpwalk -v2c -c public <target> TAIT-TN9300-MIB::tn9300SiteCCReassignTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3570.3.6.2.2.1.1.10.1 snmpget -v2c -c public <target> TAIT-TN9300-MIB::tn9300SiteCCReassignTimeout.1
Start monitoring Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TAIT-TN9300-MIB::tn9300SiteCCReassignTimeout OID value, configure state conditions and alerts, and monitor any Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3570 | tait | TAIT-COMMON-MIB |
| 1.3.6.1.4.1.3570.3 | taitProducts | TAIT-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3570.3.6 | tn9300MIB | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2 | tn9300Objs | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2 | tn9300SiteObjs | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1 | tn9300SiteTable | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1.1 | tn9300SiteEntry | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1.1.10 | tn9300SiteCCReassignTimeout | TAIT-TN9300-MIB |