All MIBs › TAIT-TN9300-MIB › tn9300SiteDualCC
tn9300SiteDualCC
Module: TAIT-TN9300-MIB
OID (symbolic): TAIT-TN9300-MIB::tn9300SiteDualCC
OID (numeric): 1.3.6.1.4.1.3570.3.6.2.2.1.1.17
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Dual Control Channels: Allows for a second control channel on this site. Both control channels share the other channels for traffic use.
This is useful at sites with lots of traffic channels and/or a large quantity of data communications. In addition to the primary control channel the next lowest numbered channel will be used as the second control channel (so long as it is correctly configured and not inhibited.)
When this feature is enabled and a radio registers on the primary control channel:
1. The node determines if it is allowed to used the second control channel. 2. If it is, the node instructs the radio to register on the second control channel.
When using dual control channels, you can have them with the same syscode or with complementary syscodes that have different PAR values
Single (0), Dual-same syscode(1), Dual-different PAR(2)
What is tn9300SiteDualCC?
Configures whether the site uses a second control channel in addition to the primary: Single(0), Dual-same syscode(1), or Dual-different PAR(2). Admins enable dual control channels on sites with heavy traffic or data usage to double control-channel capacity, sharing the remaining channels for traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3570.3.6.2.2.1.1.17 snmpwalk -v2c -c public <target> TAIT-TN9300-MIB::tn9300SiteDualCC
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3570.3.6.2.2.1.1.17.1 snmpget -v2c -c public <target> TAIT-TN9300-MIB::tn9300SiteDualCC.1
Start monitoring Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TAIT-TN9300-MIB::tn9300SiteDualCC OID value, configure state conditions and alerts, and monitor any Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3570 | tait | TAIT-COMMON-MIB |
| 1.3.6.1.4.1.3570.3 | taitProducts | TAIT-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3570.3.6 | tn9300MIB | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2 | tn9300Objs | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2 | tn9300SiteObjs | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1 | tn9300SiteTable | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1.1 | tn9300SiteEntry | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1.1.17 | tn9300SiteDualCC | TAIT-TN9300-MIB |