All MIBs › TAIT-TN9300-MIB › tn9300SiteExtraWaitSlots
tn9300SiteExtraWaitSlots
Module: TAIT-TN9300-MIB
OID (symbolic): TAIT-TN9300-MIB::tn9300SiteExtraWaitSlots
OID (numeric): 1.3.6.1.4.1.3570.3.6.2.2.1.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Extra Wait Slots: Represents the number of extra slots that the site should wait for a radio to reply to a control channel poll (i.e. an AHOY).
This feature is used at sites where there is an extra delay in the transmission/reception of on-air codewords that puts it outside of the MPT timing specifications, e.g. a cell extender site, which can add in 1 or more slots of delay.
Disadvantages: 1. To stop conflicts, the site will withdraw the extra slots when waiting. This means other radios will be unable to make call requests during this time.
2. As a site can only process one outgoing call (site to radio) at a time, it will not be able to process as many calls.
3. As a rule of thumb, each extra wait slot added to the site will halve the maximum call rate the site can handle.
What is tn9300SiteExtraWaitSlots?
The number of extra time slots the site waits for a radio to reply to a control-channel poll (AHOY), used to compensate for extra transmission delay such as at a cell-extender site. The source description warns that each extra slot roughly halves the site's maximum call-handling rate, so admins should set this no higher than the site's actual delay requires.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3570.3.6.2.2.1.1.9 snmpwalk -v2c -c public <target> TAIT-TN9300-MIB::tn9300SiteExtraWaitSlots
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3570.3.6.2.2.1.1.9.1 snmpget -v2c -c public <target> TAIT-TN9300-MIB::tn9300SiteExtraWaitSlots.1
Start monitoring Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TAIT-TN9300-MIB::tn9300SiteExtraWaitSlots OID value, configure state conditions and alerts, and monitor any Tait TaitNet TN9300 DMR node controller (node state/peer connectivity/call-switching status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3570 | tait | TAIT-COMMON-MIB |
| 1.3.6.1.4.1.3570.3 | taitProducts | TAIT-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3570.3.6 | tn9300MIB | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2 | tn9300Objs | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2 | tn9300SiteObjs | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1 | tn9300SiteTable | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1.1 | tn9300SiteEntry | TAIT-TN9300-MIB |
| 1.3.6.1.4.1.3570.3.6.2.2.1.1.9 | tn9300SiteExtraWaitSlots | TAIT-TN9300-MIB |