| OID symbolic | OID numeric | Type | Access | Description |
|---|
| t11FcFspfMIB | 1.3.6.1.2.1.143 | | | The MIB module for managing the Fabric Shortest Path
First (FSPF) protocol. FSPF is specified in FC-SW-4.
Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC 4626; see the RFC itself for
full legal notices. |
| t11FspfNotifications | 1.3.6.1.2.1.143.0 | | | |
| NTF t11FspfNbrStateChangNotify | 1.3.6.1.2.1.143.0.1 | | | This notification signifies that there has been a change in
the state of an FSPF neighbor. This is generated when the
FSPF state changes to a terminal state, through either
regression (i.e., goes from Full to Init or Down) or
progression (i.e., from any state to Full). The value of
't11FspfIfNbrState' is the state of the neighbor after the
change. |
| t11FspfObjects | 1.3.6.1.2.1.143.1 | | | |
| t11FspfConfiguration | 1.3.6.1.2.1.143.1.1 | | | |
| t11FspfTable | 1.3.6.1.2.1.143.1.1.1 | | not-accessible | This table allows the users to configure and monitor FSPF's
per-Fabric parameters and statistics on all Fabrics known to
locally managed switches.
Entries are created/removed by the agent if and when
(Virtual) Fabrics are created/deleted. |
| t11FspfEntry | 1.3.6.1.2.1.143.1.1.1.1 | | not-accessible | An entry containing FSPF variables, parameters, and
statistics on a particular switch (identified by values
of fcmInstanceIndex and fcmSwitchIndex) for a particular
Fabric (identified by a t11FspfFabricIndex value).
(Note that the local switch's per-fabric Domain-ID is
available in t11FamConfigDomainId, which is defined in
T11-FC-FABRIC-ADDR-MGR-MIB.) |
| T11 t11FspfFabricIndex | 1.3.6.1.2.1.143.1.1.1.1.1 | T11FabricIndex | not-accessible | A unique index value that uniquely identifies a
particular Fabric.
In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
can operate within one (or more) physical infrastructures.
In such a case, index value is used to uniquely identify a
particular Fabric within a physical infrastructure.
In a Fabric that has (can have) only a single Fabric
operating within the physical infrastructure, the
value of this Fabric Index will always be 1. |
| U32 t11FspfMinLsArrival | 1.3.6.1.2.1.143.1.1.1.1.2 | Unsigned32 | read-write | The minimum time after accepting a Link State Record
(LSR) on this Fabric before accepting another update of
the same LSR on the same Fabric.
An LSR update that is not accepted because of this time
interval is discarded. |
| U32 t11FspfMinLsInterval | 1.3.6.1.2.1.143.1.1.1.1.3 | Unsigned32 | read-write | The minimum time after this switch sends an LSR on this
Fabric before it will send another update of the same LSR
on the same Fabric. |
| U32 t11FspfLsRefreshTime | 1.3.6.1.2.1.143.1.1.1.1.4 | Unsigned32 | read-only | The interval between transmission of refresh LSRs on this
Fabric. |
| U32 t11FspfMaxAge | 1.3.6.1.2.1.143.1.1.1.1.5 | Unsigned32 | read-only | The maximum age an LSR will be retained in the FSPF
database on this Fabric. An LSR is removed from the
database after MaxAge is reached. |
| C32 t11FspfMaxAgeDiscardsEx | 1.3.6.1.2.1.143.1.1.1.1.6 | Counter32 | read-only | The number of LSRs discarded due to their age reaching
t11FspfMaxAge in this Fabric. The last discontinuity of
this counter is indicated by t11FspfCreateTime. |
| C32 t11FspfPathComputations | 1.3.6.1.2.1.143.1.1.1.1.7 | Counter32 | read-only | The number of times that the path computation algorithm
has been invoked by this Switch on this Fabric to compute
a set of minimum cost paths for this Fabric. The last
discontinuity of this counter is indicated by
t11FspfCreateTime. |
| C32 t11FspfChecksumErrors | 1.3.6.1.2.1.143.1.1.1.1.8 | Counter32 | read-only | The number of FSPF checksum errors that were detected
locally (and therefore discarded) on this Fabric.
The last discontinuity of this counter is indicated by
t11FspfCreateTime. |
| G32 t11FspfLsrs | 1.3.6.1.2.1.143.1.1.1.1.9 | Gauge32 | read-only | The current number of entries for this Fabric in the
t11FspfLsrTable. |
| T11 t11FspfCreateTime | 1.3.6.1.2.1.143.1.1.1.1.10 | T11FspfLastCreationTime | read-only | The value of sysUpTime when this entry was last created. |
| INT t11FspfAdminStatus | 1.3.6.1.2.1.143.1.1.1.1.11 | INTEGER | read-write | The desired state of FSPF in this Fabric. If value of
this object is set to 'up', then FSPF is enabled in
this Fabric. If set to 'down', then FSPF is disabled
in this Fabric -- when FSPF is disabled, FSPF provides
no routes to be included in the T11-FC-ROUTE-MIB module.
(see the T11-FC-ROUTE-MIB). |
| INT t11FspfOperStatus | 1.3.6.1.2.1.143.1.1.1.1.12 | INTEGER | read-only | State of FSPF in this Fabric. If 't11FspfAdminStatus' is
'down', then the 't11FspfOperStatus' should be 'down'.
If 't11FspfAdminStatus' is changed to 'up', then
't11FspfOperStatus' should change to 'up' as and when
FSPF is active in this Fabric. |
| T/F t11FspfNbrStateChangNotifyEnable | 1.3.6.1.2.1.143.1.1.1.1.13 | TruthValue | read-write | Specifies whether or not the local agent should
issue the notification 't11FspfNbrStateChangNotify'
when the local switch learns of a change of state
in the FSPF Neighbor Finite State Machine on an
interface in this Fabric.
If the value of the object is 'true, then the
notification is generated. If the value is 'false',
notification is not generated. |
| INT t11FspfSetToDefault | 1.3.6.1.2.1.143.1.1.1.1.14 | INTEGER | read-write | Setting this value to 'default' changes the value of each
and every writable object in this row to its default
value.
No action is taken if this object is set to 'noOp'.
The value of the object, when read, is always 'noOp'. |
| STO t11FspfStorageType | 1.3.6.1.2.1.143.1.1.1.1.15 | StorageType | read-write | The storage type for read-write objects in this
conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. |
| t11FspfIfTable | 1.3.6.1.2.1.143.1.1.2 | | not-accessible | This table allows the users to configure and monitor
the FSPF parameters that are per-interface (identified
by a t11FspfIfIndex value), per-Fabric (identified by a
t11FspfFabricIndex value), and per-switch (identified by
values of fcmInstanceIndex and fcmSwitchIndex).
Creating a row in this table via t11FspfIfRowStatus
provides the means to specify non-default parameter value(s)
for an interface at a time when the relevant row in this
table would not otherwise exist because the interface is
either down or it is not an E_Port, but the corresponding
row in the t11FspfTable must already exist.
After the non-default values have been specified for a
port's parameters, they need to be retained in this table,
even when the port becomes 'isolated'. However, having
unnecessary rows in this table clutters it up and makes
those rows that are useful harder for an NMS to find.
Therefore, when an E_Port becomes isolated, its row gets
deleted if and only if all of its parameter values are the
default values; also, when an E_Port becomes non-isolated
in a particular Fabric, a row in this table needs to exist
and is automatically created, if necessary.
The specific conditions for an automated/implicit deletion
of a row are:
a) if the corresponding interface is no longer an E_Port
(e.g., a G_Port which is dynamically determined to be an
F_Port), and all configurable parameters have default
values; or
b) if the interface identified by t11FspfIfIndex no longer
exists (e.g., because a line-card is physically removed);
or
c) if the corresponding row in the t11FspfTable is deleted. |
| t11FspfIfEntry | 1.3.6.1.2.1.143.1.1.2.1 | | not-accessible | An entry containing FSPF information for the interface
identified by t11FspfIfIndex, on the fabric identified
by t11FspfFabricIndex, on the switch identified by
fcmSwitchIndex. |
| NUM t11FspfIfIndex | 1.3.6.1.2.1.143.1.1.2.1.1 | InterfaceIndex | not-accessible | The value of ifIndex that identifies the local
Fibre Channel interface for which this entry
contains FSPF information. |
| U32 t11FspfIfHelloInterval | 1.3.6.1.2.1.143.1.1.2.1.2 | Unsigned32 | read-create | Interval between the periodic HELLO messages sent on this
interface in this Fabric to verify the link health. Note
that this value must be same at both ends of a link in
this Fabric. |
| U32 t11FspfIfDeadInterval | 1.3.6.1.2.1.143.1.1.2.1.3 | Unsigned32 | read-create | Maximum time for which no HELLO messages can be received
on this interface in this Fabric. After this time, the
interface is assumed to be broken and removed from the
database. Note that this value must be greater than the
HELLO interval specified on this interface in this Fabric. |
| U32 t11FspfIfRetransmitInterval | 1.3.6.1.2.1.143.1.1.2.1.4 | Unsigned32 | read-create | The time after which an unacknowledged LSR is
retransmitted on this interface in this Fabric. |
| C32 t11FspfIfInLsuPkts | 1.3.6.1.2.1.143.1.1.2.1.5 | Counter32 | read-only | Number of Link State Update (LSU) packets received on
this interface in this Fabric. The last discontinuity
of this counter is indicated by t11FspfIfCreateTime. |
| C32 t11FspfIfInLsaPkts | 1.3.6.1.2.1.143.1.1.2.1.6 | Counter32 | read-only | Number of Link State Acknowledgement (LSA) packets
received on this interface in this Fabric. The last
discontinuity of this counter is indicated by
t11FspfIfCreateTime. |
| C32 t11FspfIfOutLsuPkts | 1.3.6.1.2.1.143.1.1.2.1.7 | Counter32 | read-only | Number of Link State Update (LSU) packets transmitted
on this interface in this Fabric. The last
discontinuity of this counter is indicated by
t11FspfIfCreateTime. |
| C32 t11FspfIfOutLsaPkts | 1.3.6.1.2.1.143.1.1.2.1.8 | Counter32 | read-only | Number of Link State Acknowledgement (LSA) packets
transmitted on this interface in this Fabric. The
last discontinuity of this counter is indicated by
t11FspfIfCreateTime. |
| C32 t11FspfIfOutHelloPkts | 1.3.6.1.2.1.143.1.1.2.1.9 | Counter32 | read-only | Number of HELLO packets transmitted on this interface in
this Fabric. The last discontinuity of this counter is
indicated by t11FspfIfCreateTime. |
| C32 t11FspfIfInHelloPkts | 1.3.6.1.2.1.143.1.1.2.1.10 | Counter32 | read-only | Number of HELLO packets received on this interface in
this Fabric. The last discontinuity of this counter is
indicated by t11FspfIfCreateTime. |
| C32 t11FspfIfRetransmittedLsuPkts | 1.3.6.1.2.1.143.1.1.2.1.11 | Counter32 | read-only | The number of LSU packets that contained one or more
retransmitted LSRs, and that were transmitted on this
interface in this Fabric. The last discontinuity of
this counter is indicated by t11FspfIfCreateTime. |
| C32 t11FspfIfInErrorPkts | 1.3.6.1.2.1.143.1.1.2.1.12 | Counter32 | read-only | Number of invalid FSPF control packets received on this
interface in this Fabric. The last discontinuity of
this counter is indicated by t11FspfIfCreateTime. |
| NUM t11FspfIfNbrState | 1.3.6.1.2.1.143.1.1.2.1.13 | T11FspfInterfaceState | read-only | The state of FSPF's 'neighbor state machine', which is
the operational state of the interaction with the
neighbor's interface that is connected to this interface.
If the 't11FspfIfAdminStatus' is 'down', then this object
should be 'down'. If the 't11FspfIfAdminStatus' is 'up',
then this object's value depends on the state of FSPF's
'neighbor state machine' on this interface in this
Fabric. |
| FCD t11FspfIfNbrDomainId | 1.3.6.1.2.1.143.1.1.2.1.14 | FcDomainIdOrZero | read-only | The Domain Id of the neighbor in this Fabric. |
| U32 t11FspfIfNbrPortIndex | 1.3.6.1.2.1.143.1.1.2.1.15 | Unsigned32 | read-only | The index, as known by the neighbor, of the neighbor's
interface that is connected to this interface in this
Fabric. |
| INT t11FspfIfAdminStatus | 1.3.6.1.2.1.143.1.1.2.1.16 | INTEGER | read-create | The desired state of FSPF on this interface in this
Fabric, whenever 't11FspfAdminStatus' is 'up'.
If the value of this object is set to 'up', then FSPF is
enabled on this interface in this Fabric. If set to
'down', then FSPF is disabled on this interface in this
Fabric. Note that the operational state of FSPF on an
interface is given by t11FspfIfNbrState. |
| T11 t11FspfIfCreateTime | 1.3.6.1.2.1.143.1.1.2.1.17 | T11FspfLastCreationTime | read-only | The value of sysUpTime when this entry was last
created. |
| INT t11FspfIfSetToDefault | 1.3.6.1.2.1.143.1.1.2.1.18 | INTEGER | read-create | Setting this value to 'default' changes the value of each
and every writable object in this row to its default
value.
If all the configuration parameters have their default
values, and if the interface is down, then the row is
deleted automatically.
No action is taken if this object is set to 'noOp'.
The value of the object, when read, is always 'noOp'. |
| U32 t11FspfIfLinkCostFactor | 1.3.6.1.2.1.143.1.1.2.1.19 | Unsigned32 | read-create | The administrative factor used in calculating the cost
of sending a frame on this interface in this Fabric.
The formula used to calculate the link cost is:
Link Cost = S * (1.0625e12 / ifSpeed)
where:
S = (the value of this object / 100)
ifSpeed = interface speed (as defined in the IF-MIB). |
| STO t11FspfIfStorageType | 1.3.6.1.2.1.143.1.1.2.1.20 | StorageType | read-create | The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. |
| ROW t11FspfIfRowStatus | 1.3.6.1.2.1.143.1.1.2.1.21 | RowStatus | read-create | The status of the conceptual row.
This object can be used to create an entry only if there
is an entry in the t11FspfTable for the corresponding
Fabric, and if the interface is either isolated or is a
non-E_port.
Setting this object to 'destroy' will typically fail;
to reverse the creation process, set the corresponding
instance of t11FspfIfSetToDefault to 'default'. |
| NUM t11FspfIfPrevNbrState | 1.3.6.1.2.1.143.1.1.3 | T11FspfInterfaceState | accessible-for-notify | The previous state of FSPF's Neighbor Finite State
Machine on an interface.
This object is only used in the
't11FspfNbrStateChangNotify' notification. |
| t11FspfDatabase | 1.3.6.1.2.1.143.1.2 | | | |
| t11FspfLsrTable | 1.3.6.1.2.1.143.1.2.1 | | not-accessible | This table is the database of all the latest
incarnations of the Link State Records (LSRs) that
are currently contained in the topology database,
for all interfaces on all Fabrics known to
locally managed switches.
A Fabric's topology database contains the LSRs that
have been either issued or received by a local switch on
that Fabric, and that have not reached t11FspfMaxAge. |
| t11FspfLsrEntry | 1.3.6.1.2.1.143.1.2.1.1 | | not-accessible | This gives information for the most recent update of an
LSR. There is one entry for every LSR issued or received
by a locally managed switch (identified by
fcmInstanceIndex and fcmSwitchIndex) in a Fabric
(identified by t11FspfFabricIndex). |
| FCD t11FspfLsrDomainId | 1.3.6.1.2.1.143.1.2.1.1.1 | FcDomainIdOrZero | not-accessible | Domain Id of the LSR owner in this Fabric. It is the
Link State Id of this LSR. |
| T11 t11FspfLsrType | 1.3.6.1.2.1.143.1.2.1.1.2 | T11FspfLsrType | not-accessible | Type of this LSR. |
| FCD t11FspfLsrAdvDomainId | 1.3.6.1.2.1.143.1.2.1.1.3 | FcDomainIdOrZero | read-only | Domain Id of the switch that is advertising the LSR on
the behalf of the switch owning it. |
| U32 t11FspfLsrAge | 1.3.6.1.2.1.143.1.2.1.1.4 | Unsigned32 | read-only | The time since this LSR was inserted into the database. |
| U32 t11FspfLsrIncarnationNumber | 1.3.6.1.2.1.143.1.2.1.1.5 | Unsigned32 | read-only | The link state incarnation number of this LSR. This is
used to identify most recent instance of an LSR while
updating the topology database when an LSR is received.
The updating of an LSR includes incrementing its
incarnation number prior to transmission of the updated
LSR. So, the most recent LSR is the one with the
largest incarnation number. |
| U32 t11FspfLsrCheckSum | 1.3.6.1.2.1.143.1.2.1.1.6 | Unsigned32 | read-only | The checksum of the LSR. |
| U32 t11FspfLsrLinks | 1.3.6.1.2.1.143.1.2.1.1.7 | Unsigned32 | read-only | Number of entries in the t11FspfLinkTable associated with
this LSR. |
| U32 t11FspfLinkNumber | 1.3.6.1.2.1.143.1.2.3 | Unsigned32 | read-only | The number of rows in the t11FspfLinkTable. |
| t11FspfLinkTable | 1.3.6.1.2.1.143.1.2.4 | | not-accessible | This table contains the list of Inter-Switch Links and
their information that is part of an LSR, either
received or transmitted. |
| t11FspfLinkEntry | 1.3.6.1.2.1.143.1.2.4.1 | | not-accessible | An entry that contains information about a link
contained in an LSR in this Fabric. An entry is created
whenever a new link appears in an (issued or received)
LSR. An entry is deleted when a link no longer appears
in an (issued or received) LSR. |
| U32 t11FspfLinkIndex | 1.3.6.1.2.1.143.1.2.4.1.1 | Unsigned32 | not-accessible | An arbitrary index of this link. |
| FCD t11FspfLinkNbrDomainId | 1.3.6.1.2.1.143.1.2.4.1.2 | FcDomainIdOrZero | read-only | The Domain Id of the neighbor on the other end of this
link in this Fabric. |
| U32 t11FspfLinkPortIndex | 1.3.6.1.2.1.143.1.2.4.1.3 | Unsigned32 | read-only | The source E_port of this link, as indicated by the index
value in the LSR received from the switch identified by
't11FspfLsrDomainId'. |
| U32 t11FspfLinkNbrPortIndex | 1.3.6.1.2.1.143.1.2.4.1.4 | Unsigned32 | read-only | The destination E_port of this link, as indicated by the
index value in the LSR received from the switch identified
by 't11FspfLinkNbrDomainId'. |
| T11 t11FspfLinkType | 1.3.6.1.2.1.143.1.2.4.1.5 | T11FspfLinkType | read-only | The type of this link. |
| I32 t11FspfLinkCost | 1.3.6.1.2.1.143.1.2.4.1.6 | Integer32 | read-only | The cost of sending a frame on this link in this Fabric.
Link cost is calculated using the formula:
link cost = S * (1.0625e12 / Signalling Rate)
For issued LSRs, S is determined by the value of
t11FspfIfLinkCostFactor for the corresponding interface
and Fabric. |
| t11FspfConformance | 1.3.6.1.2.1.143.2 | | | |
| t11FspfMIBCompliances | 1.3.6.1.2.1.143.2.1 | | | |
| t11FspfMIBCompliance | 1.3.6.1.2.1.143.2.1.1 | | | The compliance statement for entities that
implement the FSPF. |
| t11FspfMIBGroups | 1.3.6.1.2.1.143.2.2 | | | |
| t11FspfGeneralGroup | 1.3.6.1.2.1.143.2.2.1 | | | A collection of objects for displaying and
configuring FSPF parameters. |
| t11FspfIfGroup | 1.3.6.1.2.1.143.2.2.2 | | | A collection of objects for displaying the FSPF
interface information. |
| t11FspfIfCounterGroup | 1.3.6.1.2.1.143.2.2.3 | | | A collection of objects for counting particular
FSPF-packet occurrences on an interface. |
| t11FspfDatabaseGroup | 1.3.6.1.2.1.143.2.2.4 | | | A collection of objects for displaying the FSPF
topology database information. |
| t11FspfNotificationGroup | 1.3.6.1.2.1.143.2.2.5 | | | A collection of notifications for FSPF. |
