| OID symbolic | OID numeric | Type | Access | Description |
|---|
| t11FcRouteMIB | 1.3.6.1.2.1.144 | | | The MIB module for configuring and displaying Fibre
Channel Route Information.
Copyright (C) The Internet Society (2006). This version
of this MIB module is part of RFC 4625; see the RFC
itself for full legal notices. |
| t11FcRouteNotifications | 1.3.6.1.2.1.144.0 | | | |
| t11FcRouteObjects | 1.3.6.1.2.1.144.1 | | | |
| t11FcRouteFabricTable | 1.3.6.1.2.1.144.1.1 | | not-accessible | The table containing Fibre Channel Routing information
that is specific to a Fabric. |
| t11FcRouteFabricEntry | 1.3.6.1.2.1.144.1.1.1 | | not-accessible | Each entry contains routing information specific to a
particular Fabric on a particular switch (identified by
values of fcmInstanceIndex and fcmSwitchIndex). |
| T11 t11FcRouteFabricIndex | 1.3.6.1.2.1.144.1.1.1.1 | T11FabricIndex | not-accessible | A unique index value that uniquely identifies a
particular Fabric.
In a Fabric conformant to FC-SW-3, only a single Fabric
can operate within a physical infrastructure, and thus
the value of this Fabric Index will always be 1.
In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
can operate within one (or more) physical infrastructures.
In such a case, index value is used to uniquely identify a
particular Fabric within a physical infrastructure. |
| TIM t11FcRouteFabricLastChange | 1.3.6.1.2.1.144.1.1.1.2 | TimeStamp | read-only | The value of sysUpTime at the most recent time when any
corresponding row in the t11FcRouteTable was created,
modified, or deleted. A corresponding row in the
t11FcRouteTable is for the same management instance,
the same switch, and same Fabric as the row in this table.
If no change has occurred since the last restart of the
management system, then the value of this object is 0. |
| t11FcRouteTable | 1.3.6.1.2.1.144.1.2 | | not-accessible | The Fibre Channel Routing tables for the
locally managed switches. This table lists all the
routes that are configured in and/or computed by any
local switch for any Fabric.
Such routes are used by a switch to forward frames (of user
data) on a Fabric. The conceptual process is based on
extracting the Destination Fibre Channel Address Identifier
(D_ID) out of a received frame (of user data) and comparing
it to each entry of this table that is applicable to the
given switch and Fabric. Such comparison consists of first
performing a logical-AND of the extracted D_ID with a mask
(the value of t11FcRouteDestMask) and second comparing the
result of that 'AND' operation to the value of
t11FcRouteDestAddrId. A similar comparison is made of the
Source Fibre Channel Address Identifier (S_ID) of a frame
against the t11FcRouteSrcAddrId and t11FcRouteSrcMask values
of an entry. If an entry's value of t11FcRouteInInterface
is non-zero, then a further comparison determines if the
frame was received on the appropriate interface. If all of
these comparisons for a particular entry are successful,
then that entry represents a potential route for forwarding
the received frame.
For entries configured by a user, t11FcRouteProto has
the value 'netmgmt'; only entries of this type can be
deleted by the user. |
| t11FcRouteEntry | 1.3.6.1.2.1.144.1.2.1 | | not-accessible | Each entry contains a route to a particular destination,
possibly from a particular subset of source addresses,
on a particular Fabric via a particular output interface
and learned in a particular manner. |
| ADR t11FcRouteDestAddrId | 1.3.6.1.2.1.144.1.2.1.1 | FcAddressIdOrZero | not-accessible | The destination Fibre Channel Address Identifier of
this route. A zero-length string for this field is
not allowed. |
| ADR t11FcRouteDestMask | 1.3.6.1.2.1.144.1.2.1.2 | FcAddressIdOrZero | not-accessible | The mask to be logical-ANDed with a destination
Fibre Channel Address Identifier before it is compared
to the value in the t11FcRouteDestAddrId field.
Allowed values are 255.255.255, 255.255.0, or 255.0.0.
FSPF's definition generates routes to a Domain_ID,
so the mask for all FSPF-generated routes is 255.0.0.
The zero-length value has the same meaning as 0.0.0. |
| ADR t11FcRouteSrcAddrId | 1.3.6.1.2.1.144.1.2.1.3 | FcAddressIdOrZero | not-accessible | The source Fibre Channel Address Identifier of this
route. Note that if this object and the corresponding
instance of t11FcRouteSrcMask both have a value of 0.0.0,
then this route matches all source addresses. The
zero-length value has the same meaning as 0.0.0. |
| ADR t11FcRouteSrcMask | 1.3.6.1.2.1.144.1.2.1.4 | FcAddressIdOrZero | not-accessible | The mask to be logical-ANDed with a source
Fibre Channel Address Identifier before it is compared
to the value in the t11FcRouteSrcAddrId field. Allowed
values are 255.255.255, 255.255.0, 255.0.0, or 0.0.0.
The zero-length value has the same meaning as 0.0.0. |
| NUM t11FcRouteInInterface | 1.3.6.1.2.1.144.1.2.1.5 | InterfaceIndexOrZero | not-accessible | If the value of this object is non-zero, it is the
value of ifIndex that identifies the local
Fibre Channel interface through which a frame
must have been received in order to match with
this entry. If the value of this object is zero,
the matching does not require that the frame be
received on any specific interface. |
| INT t11FcRouteProto | 1.3.6.1.2.1.144.1.2.1.6 | INTEGER | not-accessible | The mechanism via which this route was learned:
other(1) - not specified
local(2) - local interface
netmgmt(3)- static route
fspf(4) - Fibre Shortest Path First |
| NUM t11FcRouteOutInterface | 1.3.6.1.2.1.144.1.2.1.7 | InterfaceIndex | not-accessible | The value of ifIndex that identifies the local
Fibre Channel interface through which the next hop
of this route is to be reached. |
| FCD t11FcRouteDomainId | 1.3.6.1.2.1.144.1.2.1.8 | FcDomainIdOrZero | read-create | The domain_ID of next hop switch.
This object can have a value of zero if the value
of t11FcRouteProto is 'local'. |
| U32 t11FcRouteMetric | 1.3.6.1.2.1.144.1.2.1.9 | Unsigned32 | read-create | The routing metric for this route.
The use of this object is dependent on t11FcRouteProto. |
| INT t11FcRouteType | 1.3.6.1.2.1.144.1.2.1.10 | INTEGER | read-create | The type of route.
local(1) - a route for which the next Fibre Channel
port is the final destination;
remote(2) - a route for which the next Fibre Channel
port is not the final destination. |
| INT t11FcRouteIfDown | 1.3.6.1.2.1.144.1.2.1.11 | INTEGER | read-create | The value of this object indicates what happens to
this route when the output interface (given by the
corresponding value of t11FcRouteOutInterface) is
operationally 'down'. If this object's value is 'retain',
the route is to be retained in this table. If this
object's value is 'remove', the route is to be removed
from this table. |
| STO t11FcRouteStorageType | 1.3.6.1.2.1.144.1.2.1.12 | StorageType | read-create | The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. |
| ROW t11FcRouteRowStatus | 1.3.6.1.2.1.144.1.2.1.13 | RowStatus | read-create | The status of this conceptual row.
The only rows that can be deleted by setting this object to
'destroy' are those for which t11FcRouteProto has the value
'netmgmt'. |
| t11FcRouteConformance | 1.3.6.1.2.1.144.2 | | | |
| t11FcRouteCompliances | 1.3.6.1.2.1.144.2.1 | | | |
| t11FcRouteCompliance | 1.3.6.1.2.1.144.2.1.1 | | | The compliance statement for entities that
implement the T11-FC-ROUTE-MIB.
--
-- Note: The next four OBJECT clauses are for auxiliary objects, and the
-- SMIv2 does not permit inclusion of objects that are not accessible
-- in an OBJECT clause (see Sections 3.1 & 5.4.3 in STD 58, RFC 2580).
-- Thus, these four clauses cannot be included below in the normal
-- location for OBJECT clauses.
--
-- OBJECT t11FcRouteSrcAddrId
-- SYNTAX FcAddressIdOrZero (SIZE (0))
-- DESCRIPTION
-- 'Support is not required for routes that
-- match only a subset of possible source
-- addresses.'
--
-- OBJECT t11FcRouteSrcMask
-- SYNTAX FcAddressIdOrZero (SIZE (0))
-- DESCRIPTION
-- 'Support is not required for routes that
-- match only a subset of possible source
-- addresses.'
--
-- OBJECT t11FcRouteDestMask
-- DESCRIPTION
-- 'Support is mandatory only for FSPF-generated
-- routes. Since FSPF's definition generates
-- routes to a Domain_ID, the mask for all
-- FSPF-generated routes is 255.0.0. Thus,
-- support is only required for 255.0.0.'
--
-- OBJECT t11FcRouteInInterface
-- SYNTAX InterfaceIndexOrZero (0)
-- DESCRIPTION
-- 'Support for routes specific to particular
-- source interfaces is not required.' |
| t11FcRouteGroups | 1.3.6.1.2.1.144.2.2 | | | |
| t11FcRouteGroup | 1.3.6.1.2.1.144.2.2.1 | | | A collection of objects for displaying and configuring
routes. |
