| OID symbolic | OID numeric | Type | Access | Description |
|---|
| U32 t11FamAreaAreaId | 1.3.6.1.2.1.137.1.2.1.1.1 | Unsigned32 | not-accessible | The Area_ID of this area. |
| OCT t11FamAreaAssignedPortIdList | 1.3.6.1.2.1.137.1.2.1.1.2 | OCTET STRING | read-only | The list of Port_IDs which have been assigned in
this area and Fabric, formatted as an array of
octets in ascending order. There could be zero or more
Port_IDs assigned on this area and Fabric.
Each octet represents one Port_ID. So, the list containing
the Port_IDs 23, 45, 235, and 56 would be formatted as the
4-octet string x'172d38eb'. |
| t11FamAreaEntry | 1.3.6.1.2.1.137.1.2.1.1 | | not-accessible | An entry gives information on the Area_ID and all
Port_IDs that have been assigned within an area for
the Fabric identified by t11FamFabricIndex, by the
Fabric Address Manager in the switch identified by
fcmInstanceIndex and fcmSwitchIndex. |
| t11FamAreaGroup | 1.3.6.1.2.1.137.2.2.4 | | | A collection of objects containing information about
currently assigned addresses within a domain. |
| t11FamAreaTable | 1.3.6.1.2.1.137.1.2.1 | | not-accessible | This table contains area assignments per-Fabric by a
switch's Fabric Address Manager. Each octet in
t11FamAssignedAreaList is able to be used to index into
this table to find information on each area. |
| OCT t11FamAssignedAreaIdList | 1.3.6.1.2.1.137.1.1.1.1.9 | OCTET STRING | read-only | The list of (zero or more) Area_IDs that have been
assigned by a particular switch in this Fabric, formatted
as an array of octets in ascending order.
Each octet represents one Area_ID. So, the list containing
Area_IDs 23, 45, 235, and 56 would be formatted as the
4-octet string x'172d38eb'.
A particular area's Area_ID is used as the index into the
t11FamAreaTable to get the statistics on that area. |
| G32 t11FamAssignedFcIds | 1.3.6.1.2.1.137.1.1.1.1.13 | Gauge32 | read-only | The number of Fibre Channel Address Identifiers that are
currently assigned on this Fabric.
The sum of the instances of FreeFcIds and AssignedFcIds
corresponding to a particular Fabric is the total number of
Fibre Channel Address Identifiers that the local Fabric
Address Management is capable of assigning on that Fabric. |
| T/F t11FamAutoReconfigure | 1.3.6.1.2.1.137.1.1.1.1.4 | TruthValue | read-write | This object determines how a particular switch
responds to certain error conditions.
The condition that might cause these errors is
the merging of two disjoint Fabrics that have
overlapping Domain_ID lists.
If value of this object is 'true', the switch will
send an RCF (ReConfigureFabric) to rebuild the
Fabric.
If 'false', the switch will isolate the E_Ports on
which the errors happened.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| G32 t11FamAvailableFcIds | 1.3.6.1.2.1.137.1.1.1.1.14 | Gauge32 | read-only | The number of Fibre Channel Address Identifiers that are
unassigned and currently available for immediate assignment
on the Fabric, e.g., with the 'Clean Address' bit set to 1. |
| C32 t11FamBuildFabrics | 1.3.6.1.2.1.137.1.1.1.1.20 | Counter32 | read-only | The number of non-disruptive fabric reconfigurations (BFs)
that have occurred on this Fabric.
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0. |
| t11FamCacheGroup | 1.3.6.1.2.1.137.2.2.5 | | | A collection of objects containing information about
recently-released Fibre Channel Address Identifiers. |
| t11FamCommandGroup | 1.3.6.1.2.1.137.2.2.2 | | | A collection of objects used for initiating an
operation on the Fabric. |
| FCD t11FamConfigDomainId | 1.3.6.1.2.1.137.1.1.1.1.2 | FcDomainIdOrZero | read-write | The configured Domain_ID of the particular switch on this
Fabric, or zero if no Domain_ID has been configured.
The meaning of this object depends on
t11FamConfigDomainIdType object.
If t11FamConfigDomainIdType is 'preferred', then the
configured Domain_ID is called the 'preferred Domain_ID'.
Valid values are between 0 and 239. In a situation where
this Domain_ID cannot be assigned, any other Domain_ID
will be acceptable. A value of zero means any Domain_ID.
If t11FamConfigDomainIdType is 'insistent', then the
configured Domain_ID is called the 'insistent Domain_ID' and
valid values are between 1 and 239. In a situation where
this Domain_ID cannot be assigned, no other Domain_ID is
acceptable.
In both of the above cases, the switch sends an RDI (Request
Domain_ID) to request this Domain_ID to the Principal
Switch. If no Domain_ID is able to be granted in the case
of 'preferred', or if an 'insistent' Domain_ID is configured
but not able to be granted, then it is an error condition.
When this error occurs, the switch will continue as if it
receives a SW_RJT with a reason/explanation of 'Unable to
perform command request'/'Domain_ID not available'. That
is, its E_Ports on that Fabric will be isolated and the
administrator informed via a 't11FamDomainIdNotAssigned'
notification.
If t11FamConfigDomainIdType is 'static', then the configured
Domain_ID is called the 'static Domain_ID' and valid values
are between 1 and 239. In this situation, there is no
Principal Switch in the Fabric and the Domain_ID is simply
assigned by configuration, together with the Fabric_Name.
A switch configured with a static Domain_ID, on receiving
an EFP, BF, RCF, DIA, or RDI SW_ILS, shall reply with an
SW_RJT having Reason Code Explanation 'E_Port is Isolated'
and shall isolate the receiving E_Port.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| INT t11FamConfigDomainIdType | 1.3.6.1.2.1.137.1.1.1.1.3 | INTEGER | read-write | Type of configured Domain_ID contained in
t11FamConfigDomainId.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| t11FamConfiguration | 1.3.6.1.2.1.137.1.1 | | | |
| T/F t11FamContiguousAllocation | 1.3.6.1.2.1.137.1.1.1.1.5 | TruthValue | read-write | Determines how a particular switch behaves when elected as
the Principal Switch.
If true, the switch will only accept RDIs with a contiguous
allocation; specifically, it will reject RDIs with
non-contiguous Domain_IDs, and if an RDI for a contiguous
Domain_ID is not able to be fulfilled, it will try to
replace all the Domain_IDs in the list with contiguous
Domain_IDs, and if that fails, the RDI will be rejected.
If false, then the switch acts normally in granting
the Domain_IDs even if they are not contiguous.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| FCD t11FamDatabaseDomainId | 1.3.6.1.2.1.137.1.2.2.1.1 | FcDomainIdOrZero | not-accessible | The Domain_ID for which this row contains information.
The value must be non-zero. |
| t11FamDatabaseEntry | 1.3.6.1.2.1.137.1.2.2.1 | | not-accessible | An entry (conceptual row) in the t11FamDatabaseTable
containing information about one Domain_ID in the
Fabric identified by t11FamFabricIndex, and known by
the switch identified by t11FamFabricIndex and
t11FamDatabaseDomainId. |
| t11FamDatabaseGroup | 1.3.6.1.2.1.137.2.2.3 | | | A collection of objects containing information about
Domain-IDs assignments. |
| FCN t11FamDatabaseSwitchWwn | 1.3.6.1.2.1.137.1.2.2.1.2 | FcNameIdOrZero | read-only | The node name (WWN) of the switch to which the
corresponding value of t11FamDatabaseDomainId is currently
assigned for the particular Fabric. |
| t11FamDatabaseTable | 1.3.6.1.2.1.137.1.2.2 | | not-accessible | This table contains all information known by
a switch about all the domains that have been
assigned in each Fabric. |
| FCD t11FamDomainId | 1.3.6.1.2.1.137.1.1.1.1.22 | FcDomainIdOrZero | read-only | The Domain_ID of a particular switch on this Fabric or
zero if no Domain_ID has been assigned. |
| NTF t11FamDomainIdNotAssignedNotify | 1.3.6.1.2.1.137.0.1 | | | This notification indicates that a Domain_ID has not
been configured or assigned for a particular Fabric,
identified by t11FamNotifyFabricIndex, on a particular
switch identified by t11FamLocalSwitchWwn. This could
happen under the following conditions, and results in the
switch isolating E_Ports on the Fabric:
- if the switch's request for a configured static
Domain_ID is rejected or no other Domain_ID is
assigned, then the E_Ports are isolated. |
| T/F t11FamEnable | 1.3.6.1.2.1.137.1.1.1.1.26 | TruthValue | read-write | Enables the Fabric Address Manager on this switch
on this Fabric.
If enabled on a Fabric, the switch will participate in
Principal Switch selection, and Domain_IDs are assigned
dynamically. If disabled, the switch will not participate
in Principal Switch selection, and Domain_IDs are
assigned statically. Thus, the corresponding value of
t11FamConfigDomainIdType needs to be 'static'.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| t11FamEntry | 1.3.6.1.2.1.137.1.1.1.1 | | not-accessible | An entry provides information on the local Fabric Address
Manager functionality for a Fabric known to a
particular switch. |
| NTF t11FamFabricChangeNotify | 1.3.6.1.2.1.137.0.3 | | | This notification is sent whenever a particular switch,
identified by t11FamLocalSwitchWwn, sends or
receives a Build Fabric (BF) or a ReConfigure Fabric
(RCF) message on the Fabric identified by
t11FamNotifyFabricIndex.
This notification is not sent if a
't11FamNewPrincipalSwitchNotify' notification is sent
for the same event. |
| T11 t11FamFabricIndex | 1.3.6.1.2.1.137.1.1.1.1.1 | T11FabricIndex | not-accessible | A unique index value that uniquely identifies a
particular Fabric known to a particular switch.
In a Fabric conformant to FC-SW-3, only a single Fabric
can operate within a physical infrastructure, and thus,
the value of this Fabric Index will always be 1.
However, the current standard, FC-SW-4, defines
how multiple Fabrics, each with its own management
instrumentation, could operate within one (or more)
physical infrastructures. When such multiple Fabrics
are in use, this index value is used to uniquely
identify a particular Fabric within a physical
infrastructure. |
| FCN t11FamFabricName | 1.3.6.1.2.1.137.1.1.1.1.27 | FcNameIdOrZero | read-write | The WWN that is configured on this switch to be used as
the name of this Fabric when the value of t11FamEnable is
'false'.
If the value of t11FamEnable is 'true', this value is not
used.
Fibre Channel requires that:
a) all switches in an operational Fabric be
configured with the same Fabric name; and
b) each Fabric have a unique Fabric name.
If either of these is violated, either by switches within a
single Fabric being configured with different Fabric names,
or by multiple Fabrics that share management applications
or interact in other ways having the same Fabric name,
then the behavior of the switches and associated management
functions is not specified by Fibre Channel or Internet
standards.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| C32 t11FamFabricReconfigures | 1.3.6.1.2.1.137.1.1.1.1.21 | Counter32 | read-only | The number of disruptive fabric reconfigurations (RCFs)
that have occurred on this Fabric.
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0. |
| OCT t11FamFcIdCacheAreaIdPortId | 1.3.6.1.2.1.137.1.2.4.1.2 | OCTET STRING | read-only | The combination of this object and t11FamFcIdCachePortIds
represent one range of Fibre Channel Address Identifiers,
which were assigned and later released. This object
contains the Area_ID and Port_ID of the first Fibre
Channel Address Identifier in the range.
Note that this object is only 2 bytes. |
| t11FamFcIdCacheEntry | 1.3.6.1.2.1.137.1.2.4.1 | | not-accessible | An entry (conceptual row) in the t11FamFcIdCacheTable
containing information about one Fibre Channel Address
Identifier that was released from a WWN, corresponding to a
range of one or more ports connected to the switch
(identified by t11FamFabricIndex and t11FamFcIdCacheWwn) in
the Fabric (identified by t11FamFabricIndex). An entry is
created when a Fibre Channel Address Identifier is released
by the last port in the range. The oldest entry is deleted
if the number of rows in this table reaches
t11FamMaxFcIdCacheSize, and its space is required for a new
entry. An entry is also deleted when its Fibre Channel
Address Identifier is assigned to a port. |
| U32 t11FamFcIdCachePortIds | 1.3.6.1.2.1.137.1.2.4.1.3 | Unsigned32 | read-only | The combination of t11FamFcIdCacheAreaIdPortId and this
object represent one range of Fibre Channel Address
Identifiers, which were assigned and later released. This
object contains the number of (consecutive) Fibre Channel
Address Identifiers in the range. |
| t11FamFcIdCacheTable | 1.3.6.1.2.1.137.1.2.4 | | not-accessible | This table contains all the Fibre Channel Address
Identifiers that have recently been released by the
Fabric Address Manager in a switch. So, it lists
all the Fibre Channel Address Identifiers that have valid
WWN-to-Fibre Channel Address Identifier mappings and are
currently not assigned to any ports. These Fibre Channel
Address Identifiers were assigned to ports but have since
been released. These cached Fibre Channel Address
Identifiers contain only Area_ID and Port_ID information.
This cache is kept to provide best-effort re-assignment of
same Fibre Channel Address Identifiers; i.e., when an
Nx_Port asks for a Fibre Channel Address Identifier, soon
after releasing one, the same value is re-assigned, if
possible. |
| FCN t11FamFcIdCacheWwn | 1.3.6.1.2.1.137.1.2.4.1.1 | FcNameIdOrZero | not-accessible | The N_Port_Name (WWN) of the port associated with this
entry. |
| G32 t11FamFreeFcIds | 1.3.6.1.2.1.137.1.1.1.1.12 | Gauge32 | read-only | The number of Fibre Channel Address Identifiers that are
currently unassigned on this Fabric and could be available
for assignment either immediately or at some later time.
The sum of the instances of FreeFcIds and AssignedFcIds
corresponding to a particular Fabric is the total number of
Fibre Channel Address Identifiers that the local Fabric
Address Management is capable of assigning on that Fabric. |
| C32 t11FamGrantedFcIdsEx | 1.3.6.1.2.1.137.1.1.1.1.10 | Counter32 | read-only | The total number of Fibre Channel Address Identifiers
granted (for local use, i.e., with a particular switch's
Domain_ID) by the Fabric Address Manager on that switch.
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0. |
| t11FamGroup | 1.3.6.1.2.1.137.2.2.1 | | | A collection of general objects for displaying and
configuring Fabric Address management. |
| t11FamIfEntry | 1.3.6.1.2.1.137.1.1.2.1 | | not-accessible | An entry containing information on the interface
configuration on the Fabric identified by
t11FamFabricIndex. |
| T/F t11FamIfRcfReject | 1.3.6.1.2.1.137.1.1.2.1.1 | TruthValue | read-create | This object determines if the incoming ReConfigure
Fabric (RCF) messages on this interface on this
Fabric is accepted or not. If this object is 'true', then
the incoming RCF is rejected. If 'false', incoming RCF is
accepted.
Note that this object does not apply to the outgoing
RCFs generated by this interface.
Implementations that support write-access to this object
can do so under whatever conditions they choose. |
| NUM t11FamIfRole | 1.3.6.1.2.1.137.1.1.2.1.2 | T11FamDomainInterfaceRole | read-only | The role of this interface. |
| ROW t11FamIfRowStatus | 1.3.6.1.2.1.137.1.1.2.1.3 | RowStatus | read-create | The status of this row. |
| t11FamIfTable | 1.3.6.1.2.1.137.1.1.2 | | not-accessible | This table contains those Fabric Address Manager parameters
and status values that are per-interface (identified
by an ifIndex value), per-Fabric (identified by a
t11FamFabricIndex value), and per-switch (identified by
values of fcmInstanceIndex and fcmSwitchIndex).
An entry in this table is automatically created when
an E_Port becomes non-isolated on a particular Fabric.
An entry is deleted automatically from this table if:
a) the corresponding interface is no longer an E_Port (e.g.,
a G_Port that is dynamically determined to be an F_Port),
and all configuration parameter(s) have default values; or
b) the interface identified by ifIndex no longer exists
(e.g., because a line-card is physically removed); or
c) the row in the t11FamTable corresponding the fabric
identified by t11FamFabricID no longer exists.
Creating an entry in this table via t11FamIfRowStatus
provides the means to specify non-default parameter value(s)
for an interface at a time when the relevant row in this
table does not exist, i.e., because the interface is either
down or it is not an E_Port. |
| t11FamInfo | 1.3.6.1.2.1.137.1.2 | | | |
| C32 t11FamLocalPrincipalSwitchSlctns | 1.3.6.1.2.1.137.1.1.1.1.18 | Counter32 | read-only | The number of times a particular switch became the
Principal Switch on this Fabric.
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0. |
| FCN t11FamLocalSwitchWwn | 1.3.6.1.2.1.137.1.1.1.1.8 | FcNameIdOrZero | read-only | The WWN of the particular switch on this Fabric. |
| U32 t11FamMaxFcIdCacheSize | 1.3.6.1.2.1.137.1.2.3 | Unsigned32 | read-only | The maximum number of Fibre Channel Address Identifiers
that are able to be cached in the t11FamFcIdCacheTable.
If the number is unknown, the value of this object is
zero. |
| t11FamMIBCompliance | 1.3.6.1.2.1.137.2.1.1 | | | The compliance statement for Fibre Channel switches
that implement Fabric Address Manager functionality. |
| t11FamMIBCompliances | 1.3.6.1.2.1.137.2.1 | | | |
| t11FamMIBConformance | 1.3.6.1.2.1.137.2 | | | |
| t11FamMIBGroups | 1.3.6.1.2.1.137.2.2 | | | |
| t11FamMIBObjects | 1.3.6.1.2.1.137.1 | | | |
| NTF t11FamNewPrincipalSwitchNotify | 1.3.6.1.2.1.137.0.2 | | | This notification indicates that a particular switch,
identified by t11FamLocalSwitchWwn, has become the new
Principal Switch on the Fabric identified by
t11FamNotifyFabricIndex.
This notification is sent soon after its election as
the new Principal Switch, i.e., upon expiration of a
Principal Switch selection timer that is equal to
twice the Fabric Stability Timeout value (F_S_TOV). |
| t11FamNotificationGroup | 1.3.6.1.2.1.137.2.2.6 | | | A collection of notifications for status monitoring
and notification. |
| t11FamNotifications | 1.3.6.1.2.1.137.0 | | | |
| t11FamNotifyControl | 1.3.6.1.2.1.137.1.3 | | | |
| T11 t11FamNotifyFabricIndex | 1.3.6.1.2.1.137.1.3.1 | T11FabricIndex | accessible-for-notify | A unique index value that identifies a particular
Fabric for which a particular notification is generated.
In a Fabric conformant to SW-3, only a single Fabric
can operate within a physical infrastructure, and thus,
the value of this Fabric Index will always be 1.
However, the current standard, FC-SW-4, defines
how multiple Fabrics, each with its own management
instrumentation, could operate within one (or more)
physical infrastructures. In order to accommodate this
scenario, this index value is used to uniquely identify a
particular Fabric within a physical infrastructure. |
| C32 t11FamPrincipalSwitchSelections | 1.3.6.1.2.1.137.1.1.1.1.19 | Counter32 | read-only | The number of Principal Switch selections on this Fabric.
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0. |
| FCN t11FamPrincipalSwitchWwn | 1.3.6.1.2.1.137.1.1.1.1.7 | FcNameIdOrZero | read-only | The WWN of the Principal Switch on this Fabric,
or zero-length string if the identity of the principal
switch is unknown. |
| T11 t11FamPrincSwRunningPriority | 1.3.6.1.2.1.137.1.1.1.1.16 | T11FamDomainPriority | read-only | The running priority of the Principal Switch on this
Fabric. |
| T11 t11FamPriority | 1.3.6.1.2.1.137.1.1.1.1.6 | T11FamDomainPriority | read-write | The initial or configured priority of a particular switch
to be used in Principal Switch selection process.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| T/F t11FamRcFabricNotifyEnable | 1.3.6.1.2.1.137.1.1.1.1.25 | TruthValue | read-write | An indication of whether or not a particular switch
should issue a t11FamFabricChangeNotify notification on
sending or receiving ReConfigureFabric (RCF) on a Fabric.
If the value of the object is 'true', then the
notification is generated. If the value is 'false',
notification is not generated.
If an implementation requires all Fabrics to have the
same value, then setting one instance of this object
to a new object will result in all corresponding
instances being set to that same new value.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| C32 t11FamRecoveredFcIds | 1.3.6.1.2.1.137.1.1.1.1.11 | Counter32 | read-only | The total number of Fibre Channel Address Identifiers that
have been recovered by the Fabric Address Manager on a
particular switch since the switch has been initialized.
A recovered Fibre Channel Address Identifier is one that is
explicitly returned after previously being used.
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0. |
| INT t11FamRestart | 1.3.6.1.2.1.137.1.1.1.1.24 | INTEGER | read-write | This object tells the Fabric Address Manager to
request a Fabric reconfiguration.
If this object is set to 'disruptive', then an RCF
(ReConfigure Fabric) is generated in the Fabric
in order for the Fabric to recover from the errors.
If this object is set to 'nonDisruptive', then a
BF (Build Fabric) is generated in the Fabric.
No action is taken if this object is set to 'noOp'.
The value of the object when read is always 'noOp'.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
| T11 t11FamRunningPriority | 1.3.6.1.2.1.137.1.1.1.1.15 | T11FamDomainPriority | read-only | The running priority of a particular switch on this Fabric.
This value is initialized to the value of t11FamPriority,
and subsequently altered as specified by the procedures
defined in FC-SW-3. |
| T11 t11FamState | 1.3.6.1.2.1.137.1.1.1.1.17 | T11FamState | read-only | The state of the Fabric Address Manager on a particular
switch on this Fabric. |
| T/F t11FamSticky | 1.3.6.1.2.1.137.1.1.1.1.23 | TruthValue | read-only | An indication of whether a particular switch is supporting
the concept of Preferred Domain_IDs via a best-effort
attempt to re-assign the same Fibre Channel Address
Identifier value to a port on the next occasion when a port
requests an assignment on this Fabric.
If the value of this object is 'true', then the switch is
maintaining rows in the t11FamFcIdCacheTable for this
Fabric. |
| t11FamTable | 1.3.6.1.2.1.137.1.1.1 | | not-accessible | This table contains Fabric Address Manager related
parameters that are able to be configured and monitored
in a Fibre Channel switch. For each of the switches
(identified by fcmSwitchIndex) managed by a Fibre Channel
management instance (identified by fcmInstanceIndex),
there is any entry for each Fabric known to that switch.
Entries are implicitly created/removed if and when
additional Fabrics are created/deleted. |
| t11FcFabricAddrMgrMIB | 1.3.6.1.2.1.137 | | | The MIB module for the Fabric Address management
functionality defined by the Fibre Channel standards. For
the purposes of this MIB, Fabric Address Manager refers to
the functionality of acquiring DomainID(s) as specified in
FC-SW-3, and managing Fibre Channel Identifiers as specified
in FC-FS. An instance of 'Fabric Address Manager' software
functionality executes in the Principal Switch, and in each
other switch.
After an agent reboot, the values of read-write objects
defined in this MIB module are implementation-dependent.
Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC 4439; see the RFC itself for
full legal notices. |
