T11-FC-FABRIC-CONFIG-SERVER-MIB

All MIBs › T11-FC-FABRIC-CONFIG-SERVER-MIB

Organization: For the initial versions, T11. For later versions, the IETF's IMSS Working Group.

Last Updated: 2007-06-27

Category: Fibre Channel and Storage

Description: Provides management of Fibre Channel Fabric Configuration Server functionality, including topology discovery across Fabrics.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring T11-FC-FABRIC-CONFIG-SERVER-MIB with a free 30-day trial of IPNetwork Monitor.

What Is T11-FC-FABRIC-CONFIG-SERVER-MIB?

T11-FC-FABRIC-CONFIG-SERVER-MIB is a vendor-neutral T11/FC-GS-5 standards MIB for managing the Fibre Channel Fabric Configuration Server (FCS) function on a Fibre Channel switch, which discovers and reports the topology and configuration of interconnected switches, hubs, and bridges (Interconnect Elements) making up an FC SAN fabric. It exposes objects to trigger a fabric discovery scan over a specified range, track discovery status/completion time, and retrieve the resulting inventory of discovered Interconnect Elements. In terms of monitoring, its principal value is topology and software-process status: discovery status and completion-time objects reveal whether a fabric discovery job is running, completed, or failed/timed out, functioning as a job-status indicator, while the resulting Interconnect Element table provides an up-to-date inventory of switches/devices in the fabric that can be checked against an expected baseline to detect an unexpected topology change. This MIB is defined by the T11 FC-GS-5 standard and is meant to be used alongside other Fibre Channel MIBs (e.g., FC-MGMT, FC zoning MIBs) for a complete SAN management picture, rather than in isolation. Typical deployment context is an enterprise or data-center Fibre Channel SAN switch used to interconnect storage arrays and servers, where fabric-wide topology visibility supports SAN troubleshooting and change detection. Engineers implementing or auditing this functionality typically reference the T11-FC-FABRIC-CONFIG-SERVER-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in T11-FC-FABRIC-CONFIG-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor-neutral, T11 FC-GS-5 standards-based MIB, not tied to a specific manufacturer
Fibre Channel SAN switches

Monitoring Examples

An administrator would set parameters in t11FcsFabricDiscoveryTable/t11FcsFabricDiscoveryEntry (t11FcsFabricDiscoveryRangeLow/RangeHigh and t11FcsFabricDiscoveryTimeOut) and trigger t11FcsFabricDiscoveryStart to kick off a fabric scan, then poll t11FcsDiscoveryStateTable/t11FcsDiscoveryStateEntry via t11FcsFabricIndex to check t11FcsDiscoveryStatus and t11FcsDiscoveryCompleteTime for job completion. Once complete, t11FcsIeTable would be walked to enumerate the discovered switches/hubs/bridges in the fabric, and a comparison against a prior discovery would reveal if an Interconnect Element unexpectedly disappeared, indicating a switch failure or a fabric partition. A discovery that times out or reports a failed status directly indicates a fabric-wide connectivity or configuration problem rather than a single-device fault.

What Can Be Monitored

fabric discovery status
fabric discovery completion time
discovered Interconnect Element inventory
discovery range/timeout configuration
per-fabric discovery state

Imported Objects

From FC-MGMT-MIB

FcAddressIdOrZero
FcDomainIdOrZero
FcNameIdOrZero
FcPortType
fcmInstanceIndex	OBJECT-TYPE
fcmSwitchIndex	OBJECT-TYPE

From NETWORK-SERVICES-MIB

URLString

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
mib-2

From SNMPv2-TC

TEXTUAL-CONVENTION
TimeStamp
TruthValue

From T11-FC-FABRIC-ADDR-MGR-MIB

t11FamLocalSwitchWwn

OBJECT-TYPE

From T11-FC-NAME-SERVER-MIB

T11NsGs4RejectReasonCode

From T11-TC-MIB

T11FabricIndex

How to Use in IPNetwork Monitor

Example using t11FcsInGetReqs OID:

Select a device implementing T11-FC-FABRIC-CONFIG-SERVER-MIB as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type t11FcsInGetReqs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of Get Requests received by the Fabric Configuration Server on this Fabric. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
t11FcFabricConfigServerMIB	1.3.6.1.2.1.162			The MIB module for the management of a Fabric Configuration Server (FCS) in a Fibre Channel (FC) network. An FCS is defined by the FC-GS-5 standard. This MIB provides the capabilities to trigger a discovery of the configuration of one or more Fabrics, to retrieve the results of such a discovery, as well as to control and monitor the operation of an FCS. The discovered configuration contains information about: - Interconnect Elements (IEs), i.e., switches, hubs, bridges, etc., - Ports on IEs, and - Platforms that consist of one or more FC nodes. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4935; see the RFC itself for full legal notices.
OCT t11FcsAttachPortName	1.3.6.1.2.1.162.1.2.5.1.2	OCTET STRING	read-only	The attached port name. Zero or more of these names may be associated with a port object. The first 8 bytes of this object contain the WWN of the port followed by 2 reserved bytes. Following this is one byte of Port flags and one byte of Port type, as described in FC-GS-5.
t11FcsAttachPortNameListEntry	1.3.6.1.2.1.162.1.2.5.1		not-accessible	Information about the name of a particular attached port, which is known to a switch (identified by fcmInstanceIndex and fcmSwitchIndex).
T11 t11FcsAttachPortNameListIndex	1.3.6.1.2.1.162.1.2.5.1.1	T11FcListIndex	not-accessible	The index value of the attach port name list.
t11FcsAttachPortNameListTable	1.3.6.1.2.1.162.1.2.5		not-accessible	This table contains all the lists of attach port names.
t11FcsDiscoveredConfig	1.3.6.1.2.1.162.1.2
t11FcsDiscoveredConfigGroup	1.3.6.1.2.1.162.2.2.3			A collection of objects to contain the Fabric configuration information discovered by Fabric Configuration Servers.
t11FcsDiscovery	1.3.6.1.2.1.162.1.1
NTF t11FcsDiscoveryCompleteNotify	1.3.6.1.2.1.162.0.2			This notification is generated by the Fabric Configuration Server on the completion of the discovery of Fabrics in the range that has t11FcsFabricDiscoveryRangeLow at its low end.
TIM t11FcsDiscoveryCompleteTime	1.3.6.1.2.1.162.1.1.2.1.3	TimeStamp	read-only	This object contains the value of sysUpTime at which discovery was most recently completed or aborted on this Fabric. This object contains the value of zero before the first discovery on this Fabric.
T/F t11FcsDiscoveryCompNotifyEnable	1.3.6.1.2.1.162.1.4.1.1.2	TruthValue	read-write	This object specifies if the Fabric Configuration Server should generate 't11FcsDiscoveryCompleteNotify' notifications. If the value of this object is 'true', then the notification is issued. If the value of this object is 'false', then the notification is not issued.
t11FcsDiscoveryControlGroup	1.3.6.1.2.1.162.2.2.1			A collection of objects for requesting a Fabric Configuration Server to discover the configuration of one or more Fabrics.
t11FcsDiscoveryStateEntry	1.3.6.1.2.1.162.1.1.2.1		not-accessible	The discovery status for a particular Fabric on the switch identified by fcmInstanceIndex and fcmSwitchIndex.
t11FcsDiscoveryStateTable	1.3.6.1.2.1.162.1.1.2		not-accessible	This table contains the status of discovery of locally known Fabrics.
INT t11FcsDiscoveryStatus	1.3.6.1.2.1.162.1.1.2.1.2	INTEGER	read-write	The status of the discovery for the particular Fabric. Initially when the switch comes up, all instances of this object have the value: 'localOnly', and the database contains only local information, i.e., no information discovered via the Fabric Configuration Server protocol specified in FC-GS-5. If t11FcsFabricDiscoveryStart is set to 'start' for a range of Fabrics that includes this Fabric, then the value of this object transitions to 'inProgress'. When the discovery completes, this object transitions to 'completed', and the data is cached for the minimum interval of time specified by t11FcsFabricDiscoveryTimeOut. After this interval has been exceeded, the data may be lost, in which case, the value of this object changes to 'localOnly'. This object cannot be set via SNMP to any value other than 'localOnly'. If this object is set (via SNMP) to 'localOnly', the cached data for the Fabric is discarded immediately, and if a discovery initiated from this switch was in progress for this Fabric, then that discovery is aborted.
t11FcsDiscoveryStatusGroup	1.3.6.1.2.1.162.2.2.2			A collection of objects with which to monitor the status of discovery (of Fabric configurations) by Fabric Configuration Servers.
t11FcsFabricDiscoveryEntry	1.3.6.1.2.1.162.1.1.1.1		not-accessible	Control information for discovery by the switch identified by fcmInstanceIndex and fcmSwitchIndex.
T11 t11FcsFabricDiscoveryRangeHigh	1.3.6.1.2.1.162.1.1.1.1.2	T11FabricIndex	read-write	The discovery by a particular switch operates within all existing Fabrics that have a Fabric Index within a specific inclusive range. This object specifies the maximum Fabric Index value within that range. This value just represents the higher end of the range and does not necessarily represent any existing Fabric.
T11 t11FcsFabricDiscoveryRangeLow	1.3.6.1.2.1.162.1.1.1.1.1	T11FabricIndex	read-write	The discovery by a particular switch operates within all existing Fabrics that have a Fabric Index within a specific inclusive range. This object specifies the minimum Fabric Index value within that range. This value just represents the lower end of the range and does not necessarily represent any existing Fabric.
INT t11FcsFabricDiscoveryStart	1.3.6.1.2.1.162.1.1.1.1.3	INTEGER	read-write	This object provides the capability to trigger the start of a discovery by a Fabric Configuration Server. If this object is set to 'start', then the discovery is started on those Fabrics that have their Fabric Index value in the range specified by t11FcsFabricDiscoveryRangeLow and t11FcsFabricDiscoveryRangeHigh. It is recommended that whenever an instance of this object is set to 'start', that the desired range be specified at the same time by setting the corresponding instances of t11FcsFabricDiscoveryRangeLow and t11FcsFabricDiscoveryRangeHigh. Setting this object to 'start' will be rejected if a discovery is already/still in progress on any Fabrics in the specified range. No action is taken if this object is set to 'noOp'. The value of this object when read is always 'noOp'.
t11FcsFabricDiscoveryTable	1.3.6.1.2.1.162.1.1.1		not-accessible	This table contains control information for discovery of Fabric configuration by switches. Values written to objects in this table are not retained over agent reboots.
U32 t11FcsFabricDiscoveryTimeOut	1.3.6.1.2.1.162.1.1.1.1.4	Unsigned32	read-write	The minimum interval of time for which the discovered Fabric information is cached by a Fabric Configuration Server.
T11 t11FcsFabricIndex	1.3.6.1.2.1.162.1.1.2.1.1	T11FabricIndex	not-accessible	A unique index value that uniquely identifies a particular Fabric. In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures, and this index value is used to uniquely identify a particular (physical or virtual) Fabric within a physical infrastructure. In a Fabric conformant to versions earlier than FC-SW-4, only a single Fabric could operate within a physical infrastructure, and thus, the value of this Fabric Index was defined to always be 1.
FCD t11FcsIeDomainId	1.3.6.1.2.1.162.1.2.1.1.3	FcDomainIdOrZero	read-only	The Domain ID of this Interconnect Element.
t11FcsIeEntry	1.3.6.1.2.1.162.1.2.1.1		not-accessible	Information about an Interconnect Element that was discovered on a Fabric (identified by t11FcsFabricIndex), by a switch (identified by fcmInstanceIndex and fcmSwitchIndex).
FCN t11FcsIeFabricName	1.3.6.1.2.1.162.1.2.1.1.5	FcNameIdOrZero	read-only	The Fabric_Name (WWN) of this Interconnect Element. When the Fabric_Name is unknown, this object contains the all-zeros value: x'00 00 00 00 00 00 00 00'.
OCT t11FcsIeInfoList	1.3.6.1.2.1.162.1.2.1.1.8	OCTET STRING	read-only	The information list for this Interconnect Element. The value of this object is formatted as specified in FC-GS-5, i.e., it has the following substrings in order: vendor name, model name/number, and release code/level, followed by zero or more substrings of vendor-specific information. Each substring is terminated with a byte containing a null value (x'00').
OCT t11FcsIeLogicalName	1.3.6.1.2.1.162.1.2.1.1.6	OCTET STRING	read-only	The logical name of this Interconnect Element. When the logical name is unknown, this object contains the zero-length string.
NUM t11FcsIeMgmtAddrListIndex	1.3.6.1.2.1.162.1.2.1.1.7	T11FcListIndexPointerOrZero	read-only	The management address list for this Interconnect Element. This object points to an entry in the t11FcsMgmtAddrListTable.
ADR t11FcsIeMgmtId	1.3.6.1.2.1.162.1.2.1.1.4	FcAddressIdOrZero	read-only	The management identifier of this Interconnect Element. If the Interconnect Element is a switch, this object will be the Domain Controller identifier of the switch. When the value of the identifier is unknown, this object contains the all-zeros value: x'00 00 00'.
FCN t11FcsIeName	1.3.6.1.2.1.162.1.2.1.1.1	FcNameIdOrZero	not-accessible	The WWN of an Interconnect Element. This object uniquely identifies an Interconnect Element on a Fabric. If the IE is a switch, then this object is the Switch_Name (WWN) of the switch.
t11FcsIeTable	1.3.6.1.2.1.162.1.2.1		not-accessible	A table of Interconnect Elements. Interconnect Elements (IEs) are switches, hubs, bridges etc. By default, the Fabric Configuration Server will maintain detailed information pertaining only to local resources. As far as discovered topology is concerned, only the IE name, type, and Domain ID information will be maintained. If a discovery cycle is triggered on a set of Fabrics, this table along with the Port and Platform tables will be populated with the discovered information. The discovered data will be retained in this table for at least t11FcsFabricDiscoveryTimeOut seconds after the completion of its discovery or until the discovered data is invalidated.
T11 t11FcsIeType	1.3.6.1.2.1.162.1.2.1.1.2	T11FcIeType	read-only	The type of this Interconnect Element.
C32 t11FcsInDeregReqs	1.3.6.1.2.1.162.1.3.1.1.5	Counter32	read-only	The number of Deregistration Requests received by the Fabric Configuration Server on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
C32 t11FcsInGetReqsEx	1.3.6.1.2.1.162.1.3.1.1.1	Counter32	read-only	The number of Get Requests received by the Fabric Configuration Server on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
C32 t11FcsInRegReqs	1.3.6.1.2.1.162.1.3.1.1.3	Counter32	read-only	The number of Registration Requests received by the Fabric Configuration Server on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
STR t11FcsMgmtAddr	1.3.6.1.2.1.162.1.2.2.1.3	URLString	read-only	The management address of this entry. The format of this object is a Uniform Resource Locator (URL), e.g., for SNMP, see RFC 4088.
T11 t11FcsMgmtAddrChangeFabricIndex	1.3.6.1.2.1.162.1.4.2	T11FabricIndex	accessible-for-notify	The index value that identifies the Fabric on which a management address change has been detected.
FCN t11FcsMgmtAddrChangeIeName	1.3.6.1.2.1.162.1.4.3	FcNameIdOrZero	accessible-for-notify	The IE for which a management address change has been detected.
NTF t11FcsMgmtAddrChangeNotify	1.3.6.1.2.1.162.0.3			This notification is generated by the Fabric Configuration Server whenever the management address of an IE changes, i.e., whenever an entry in the t11FcsMgmtAddrListTable changes.
T/F t11FcsMgmtAddrChangeNotifyEnable	1.3.6.1.2.1.162.1.4.1.1.3	TruthValue	read-write	This object specifies if the Fabric Configuration Server should generate 't11FcsMgmtAddrChangeNotify' notifications. If the value of this object is 'true', then the notification is issued. If the value of this object is 'false', then the notification is not issued.
U32 t11FcsMgmtAddrIndex	1.3.6.1.2.1.162.1.2.2.1.2	Unsigned32	not-accessible	An integer value to distinguish different management addresses in the same list.
t11FcsMgmtAddrListEntry	1.3.6.1.2.1.162.1.2.2.1		not-accessible	Information about one management address in a management address list, which is known to a switch (identified by fcmInstanceIndex and fcmSwitchIndex).
T11 t11FcsMgmtAddrListIndex	1.3.6.1.2.1.162.1.2.2.1.1	T11FcListIndex	not-accessible	The index value of the management address list.
t11FcsMgmtAddrListTable	1.3.6.1.2.1.162.1.2.2		not-accessible	This table contains the set of management address lists that are currently referenced by any instance of the t11FcsIeMgmtAddrListIndex or t11FcsPlatformMgmtAddrListIndex objects.
t11FcsMIBCompliance	1.3.6.1.2.1.162.2.1.1			The compliance statement for entities that implement the Fabric Configuration Server.
t11FcsMIBCompliances	1.3.6.1.2.1.162.2.1
t11FcsMIBConformance	1.3.6.1.2.1.162.2
t11FcsMIBGroups	1.3.6.1.2.1.162.2.2
t11FcsMIBObjects	1.3.6.1.2.1.162.1
FCN t11FcsNodeName	1.3.6.1.2.1.162.1.2.7.1.2	FcNameIdOrZero	read-only	The name of this node.
t11FcsNodeNameListEntry	1.3.6.1.2.1.162.1.2.7.1		not-accessible	Information about a node, which is known to a switch (identified by fcmInstanceIndex and fcmSwitchIndex).
T11 t11FcsNodeNameListIndex	1.3.6.1.2.1.162.1.2.7.1.1	T11FcListIndex	not-accessible	The index value of the node name list.
t11FcsNodeNameListTable	1.3.6.1.2.1.162.1.2.7		not-accessible	This table contains all the lists of nodes.
t11FcsNotificationGroup	1.3.6.1.2.1.162.2.2.6			A collection of notifications for monitoring Fabric Configuration Servers.
t11FcsNotificationInfo	1.3.6.1.2.1.162.1.4
t11FcsNotificationInfoGroup	1.3.6.1.2.1.162.2.2.5			A collection of notification control and notification information objects for monitoring Fabric Configuration Servers.
t11FcsNotifications	1.3.6.1.2.1.162.0
t11FcsNotifyControlEntry	1.3.6.1.2.1.162.1.4.1.1		not-accessible	Each entry contains notification control information for a Fabric Configuration Server on a particular Fabric (identified by t11FcsFabricIndex) on a particular switch (identified by fcmInstanceIndex and fcmSwitchIndex).
t11FcsNotifyControlTable	1.3.6.1.2.1.162.1.4.1		not-accessible	A table of control information for notifications generated due to Fabric Configuration Server events. Values written to objects in this table should be persistent/retained over agent reboots.
C32 t11FcsOutDeregReqs	1.3.6.1.2.1.162.1.3.1.1.6	Counter32	read-only	The number of Deregistration Requests sent by the Fabric Configuration Server on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
C32 t11FcsOutGetReqs	1.3.6.1.2.1.162.1.3.1.1.2	Counter32	read-only	The number of Get Requests sent by the Fabric Configuration Server on this Fabric to other servers in the Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
C32 t11FcsOutRegReqs	1.3.6.1.2.1.162.1.3.1.1.4	Counter32	read-only	The number of Registration Requests sent by the Fabric Configuration Server on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
STR t11FcsPlatformClusterId	1.3.6.1.2.1.162.1.2.6.1.14	SnmpAdminString	read-only	An identifier for a cluster that this platform is associated with, where a cluster is a set of independent platforms that are managed together to provide increased performance capabilities, failover, etc.
NUM t11FcsPlatformClusterMgmtAddr	1.3.6.1.2.1.162.1.2.6.1.15	T11FcListIndexPointerOrZero	read-only	A list of management addresses for the cluster identified in the corresponding instance of t11FcsPlatformClusterId.
STR t11FcsPlatformDescription	1.3.6.1.2.1.162.1.2.6.1.9	SnmpAdminString	read-only	The description of this platform, in the format specified in FC-GS-5. This value should include the full name and version identification of the platform's hardware type and software operating system.
t11FcsPlatformEntry	1.3.6.1.2.1.162.1.2.6.1		not-accessible	Information about a particular platform, which is known to a switch (identified by fcmInstanceIndex and fcmSwitchIndex). A platform can contain multiple nodes. Information on nodes is contained in the t11FcsNodeNameListTable. The t11FcsPlatformNodeNameListIndex object in this table points to the list of nodes contained in this platform. Similarly, the t11FcsPlatformMgmtAddrListIndex object in this table points to the list of management addresses associated with this platform.
OCT t11FcsPlatformFC4Types	1.3.6.1.2.1.162.1.2.6.1.16	OCTET STRING	read-only	The FC-4 types supported by this platform, formatted as a bit mask as specified in FC-GS-5. If this object contains the zero-length string, the types are unknown.
U32 t11FcsPlatformIndex	1.3.6.1.2.1.162.1.2.6.1.1	Unsigned32	not-accessible	An integer value to distinguish one platform from other platforms in the same Fabric.
STR t11FcsPlatformLabel	1.3.6.1.2.1.162.1.2.6.1.10	SnmpAdminString	read-only	An administratively assigned symbolic name for the platform, in the format specified in FC-GS-5.
STR t11FcsPlatformLocation	1.3.6.1.2.1.162.1.2.6.1.11	SnmpAdminString	read-only	The physical location of the platform, in the format specified in FC-GS-5 (e.g., 'telephone closet, 3rd floor').
NUM t11FcsPlatformMgmtAddrListIndex	1.3.6.1.2.1.162.1.2.6.1.5	T11FcListIndexPointerOrZero	read-only	The list of management addresses for this platform. This object points to an entry in the t11FcsMgmtAddrListTable.
OCT t11FcsPlatformName	1.3.6.1.2.1.162.1.2.6.1.2	OCTET STRING	read-only	The name of this platform. The last byte of the value indicates the format of the name (even if the name itself is the zero-length string) as specified in FC-GS-5.
NUM t11FcsPlatformNodeNameListIndex	1.3.6.1.2.1.162.1.2.6.1.4	T11FcListIndexPointerOrZero	read-only	The list of nodes for this platform. This object points to an entry in the t11FcsNodeNameListTable.
STR t11FcsPlatformProductId	1.3.6.1.2.1.162.1.2.6.1.7	SnmpAdminString	read-only	The vendor's product and/or model identifier for this platform, in the format specified in FC-GS-5.
STR t11FcsPlatformProductRevLevel	1.3.6.1.2.1.162.1.2.6.1.8	SnmpAdminString	read-only	The product revision level for this platform, in the format specified in FC-GS-5.
NUM t11FcsPlatformSysMgmtAddr	1.3.6.1.2.1.162.1.2.6.1.13	T11FcListIndexPointerOrZero	read-only	A list of management addresses for the platform.
STR t11FcsPlatformSystemID	1.3.6.1.2.1.162.1.2.6.1.12	SnmpAdminString	read-only	An identifier for a hosting system that this platform is associated with. This identifier is used to associate platforms of logical types (e.g., logical partitions) with a physical system.
t11FcsPlatformTable	1.3.6.1.2.1.162.1.2.6		not-accessible	This table contains information on platforms. By default, this table only contains local (e.g., for a local switch) information. If a discovery is triggered, this table will also contain information gathered by the discovery process. The discovered information is retained in this table for at least t11FcsFabricDiscoveryTimeOut seconds after the completion of its discovery or until the discovered cache is invalidated.
OCT t11FcsPlatformType	1.3.6.1.2.1.162.1.2.6.1.3	OCTET STRING	read-only	The type(s) of this platform, encoded in 4 bytes as specified in FC-GS-5.
STR t11FcsPlatformVendorId	1.3.6.1.2.1.162.1.2.6.1.6	SnmpAdminString	read-only	The identifier of the vendor of this platform, in the format specified in FC-GS-5.
NUM t11FcsPortAttachPortNameIndex	1.3.6.1.2.1.162.1.2.4.1.6	T11FcListIndexPointerOrZero	read-only	The attached port name list for this port. This object points to an entry in the t11FcsAttachPortNameListTable.
t11FcsPortEntry	1.3.6.1.2.1.162.1.2.4.1		not-accessible	Information about a particular port of an Interconnect Element (identified by t11FcsIeName). The port is connected to a Fabric (identified by t11FcsFabricIndex) and known to a switch (identified by fcmInstanceIndex and fcmSwitchIndex).
U32 t11FcsPortModuleType	1.3.6.1.2.1.162.1.2.4.1.4	Unsigned32	read-only	The port module type of this port.
FCN t11FcsPortName	1.3.6.1.2.1.162.1.2.4.1.1	FcNameIdOrZero	not-accessible	The Port_Name (WWN) of the port for which this row contains information.
OCT t11FcsPortOperSpeed	1.3.6.1.2.1.162.1.2.4.1.9	OCTET STRING	read-only	The operating speed of this port. The two octets of the value are formatted as described in FC-GS-5.
U32 t11FcsPortPhyPortNum	1.3.6.1.2.1.162.1.2.4.1.5	Unsigned32	read-only	The physical number for this port. FC-GS-5 says that the contents of this field, which are carried in a field with a size of 4 bytes, are not to be restricted due to vendor-specific methods for numbering physical ports.
OCT t11FcsPortSpeedCapab	1.3.6.1.2.1.162.1.2.4.1.8	OCTET STRING	read-only	The port speed capabilities of this port. The two octets of the value are formatted as described in FC-GS-5.
T11 t11FcsPortState	1.3.6.1.2.1.162.1.2.4.1.7	T11FcPortState	read-only	The state of this port.
t11FcsPortTable	1.3.6.1.2.1.162.1.2.4		not-accessible	This table contains information about the ports of IEs.
T11 t11FcsPortTxType	1.3.6.1.2.1.162.1.2.4.1.3	T11FcPortTxType	read-only	The Port TX Type of this port.
FCP t11FcsPortType	1.3.6.1.2.1.162.1.2.4.1.2	FcPortType	read-only	The Port Type of this port.
OCT t11FcsPortZoningEnfStatus	1.3.6.1.2.1.162.1.2.4.1.10	OCTET STRING	read-only	The zoning enforcement status of this port. The 12 octets of the value are formatted as described in FC-GS-5.
OCT t11FcsRejectCtCommandString	1.3.6.1.2.1.162.1.4.1.1.4	OCTET STRING	read-only	The binary content of the Fabric Configuration Server request, formatted as an octet string (in network byte order) containing the Common Transport Information Unit (CT_IU), as described in Table 2 of FC-GS-5 (including the preamble), which was most recently rejected by the Fabric Configuration Server for this Fabric. This object contains the zero-length string if and when the CT-IU's content is unavailable. When the length of this object is 255 octets, it contains the first 255 octets of the CT-IU (in network byte order).
T11 t11FcsRejectReasonCode	1.3.6.1.2.1.162.1.4.1.1.6	T11NsGs4RejectReasonCode	read-only	This object contains the reason code corresponding to the latest Fabric Configuration Server request rejected by the local system.
T11 t11FcsRejectReasonCodeExp	1.3.6.1.2.1.162.1.4.1.1.7	T11FcsRejectReasonExplanation	read-only	When the corresponding instance of t11FcsRejectReasonCode has the value: 'unable to perform command request', this object contains the corresponding reason code explanation.
OCT t11FcsRejectReasonVendorCode	1.3.6.1.2.1.162.1.4.1.1.8	OCTET STRING	read-only	A registration reject vendor-specific code. This object contains the vendor-specific code of the most recently rejected Fabric Configuration Server Registration request for the particular port on the particular Fabric.
FCN t11FcsRejectRequestSource	1.3.6.1.2.1.162.1.4.1.1.5	FcNameIdOrZero	read-only	The WWN that was the source of the CT_IU contained in the corresponding instance of t11FcsRejectCtCommandString.
C32 t11FcsRejects	1.3.6.1.2.1.162.1.3.1.1.7	Counter32	read-only	The total number of requests rejected by the Fabric Configuration Server on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
T/F t11FcsReqRejectNotifyEnable	1.3.6.1.2.1.162.1.4.1.1.1	TruthValue	read-write	This object specifies if the Fabric Configuration Server should generate 't11FcsRqRejectNotification' notifications. If the value of this object is 'true', then the notification is issued. If the value of this object is 'false', then the notification is not issued.
NTF t11FcsRqRejectNotification	1.3.6.1.2.1.162.0.1			This notification is generated whenever the Fabric Configuration Server on a switch (indicated by the value of t11FamLocalSwitchWwn) rejects a Fabric Configuration Server request. The Fabric Configuration Server should update the t11FcsRejectReasonCode, t11FcsRejectReasonCodeExp and t11FcsRejectReasonVendorCode objects with the corresponding reason code, explanation and vendor specific code before sending the notification.
t11FcsStatisticsGroup	1.3.6.1.2.1.162.2.2.4			A collection of objects for Fabric Configuration Server statistics information.
t11FcsStats	1.3.6.1.2.1.162.1.3
t11FcsStatsEntry	1.3.6.1.2.1.162.1.3.1.1		not-accessible	A set of statistics for a particular Fabric (identified by t11FcsFabricIndex) on a switch (identified by fcmInstanceIndex and fcmSwitchIndex).
t11FcsStatsTable	1.3.6.1.2.1.162.1.3.1		not-accessible	This table contains all the statistics related to the Fabric Configuration Server.

RFC description

Manages Fibre Channel Fabric Configuration Server, enabling discovery and management of FC fabrics, switches, ports, and platforms.

Start monitoring vendor-neutral, T11/FC-GS-5 standards-based MIB, Fibre Channel SAN switches (fabric discovery job status/topology inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download T11-FC-FABRIC-CONFIG-SERVER-MIB