FJDARY-E60

Description: Fujitsu ETERNUS DX60 disk array MIB providing management objects for monitoring disks, controllers, and RAID state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

FJDARY-E60 is a Fujitsu ETERNUS disk array MIB (DX60/E60 family) for managing and monitoring enterprise storage arrays. It exposes objects for overall unit/array status, RAID and controller state, and a rich set of trap definitions covering sensor readings, maintenance events, and warnings. Its monitoring emphasis is heavily hardware-status focused: unit status, environmental sensor alarms (e.g., temperature, power), maintenance and warning trap messages, and controller/product identity all let an administrator catch a degrading disk, RAID unit, or environmental fault before data loss occurs. It is a self-contained vendor MIB, though it is typically deployed alongside standard Fibre Channel or SCSI host-connectivity monitoring for full SAN visibility. It is used to manage Fujitsu ETERNUS DX60/E60 disk arrays in enterprise SAN storage environments. Engineers can download the FJDARY-E60 file directly to load it into their MIB browser.

An admin polls fjdaryUnitStatus for overall array health and watches for trap objects such as fjdaryTrapSensorInfo, fjdaryTrapWarningInfo, and fjdaryTrapMessage to catch a degraded RAID unit or an environmental sensor alarm like over-temperature; fjdarySspWwnn and fjdarySspMachineId identify which physical array reported the fault, letting the admin pinpoint the affected unit in a multi-array environment.

Extended management for FUJITSU ETERNUS DX series storage arrays, monitoring hardware components and status.