T0510-MIB :: templowi

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › T0510-MIB › templowi

templowi

Module: T0510-MIB

OID (symbolic): T0510-MIB::templowi

OID (numeric): 1.3.6.1.4.1.22626.1.2.4.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Temperature Limit Low *10

What is templowi?

This read-write INTEGER, 0 to 65535, is the low-temperature alarm threshold expressed as an integer scaled by 10, the settable counterpart to the read-only templow string object. An admin sets this remotely via SNMP to adjust the low alarm point without needing string formatting. For example, setting templowi to 100 configures the device to alarm if the sensed temperature falls below 10.0 degrees.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22626.1.2.4.1
snmpwalk -v2c -c public <target> T0510-MIB::templowi

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22626.1.2.4.1.1
snmpget -v2c -c public <target> T0510-MIB::templowi.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22626.1.2.4.1.1 i <value>

Start monitoring COMET System T0510 networked temperature/humidity sensor (reading/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T0510-MIB::templowi OID value, configure state conditions and alerts, and monitor any COMET System T0510 networked temperature/humidity sensor (reading/alarm-threshold status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22626cometCOMETMS-MIB
1.3.6.1.4.1.22626.1productsCOMETMS-MIB
1.3.6.1.4.1.22626.1.2h0530H0530-MIB
1.3.6.1.4.1.22626.1.2.4settingsintH0530-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22626.1.2.4.1templowiT0510-MIB