H0530-MIB

All MIBs › H0530-MIB

Description: H0530-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H0530-MIB?

The H0530-MIB is a vendor MIB for the Comet System H0530 series environmental monitoring unit, a compact device that measures temperature and drives relay outputs for alarm signaling. It exposes sensor readings, configured alarm thresholds, relay states, and digital input status rather than routing or interface data. This MIB is squarely a hardware-status monitoring module: it lets administrators track the current temperature reading, whether it has crossed configured low/high thresholds, and whether the associated relay outputs have triggered an alarm condition. It has no apparent dependency on other standard MIBs, being a small self-contained enterprise MIB for this single-purpose sensor device. It is typically deployed in server rooms, comms cabinets, or industrial spaces where the H0530 unit provides SNMP-based environmental alarm monitoring alongside relay-driven physical alarms such as sirens or door locks. Network engineers evaluating or troubleshooting this functionality can download the H0530-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H0530-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Comet System H0530 environmental monitor
temperature/relay sensor appliance

Monitoring Examples

An administrator would poll the temperature object alongside tempLow and tempHigh to see the current reading against configured thresholds, and check relay1Alarm/relay2Alarm to see if an overheat or cooling-failure condition has tripped a relay. Monitoring the digital input1/input2/input3 objects can also reveal external contact-closure events, such as a door-open sensor wired into the unit.

What Can Be Monitored

temperature reading
temperature low/high thresholds
relay alarm status
digital input states
temperature hysteresis setting

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

How to Use in IPNetwork Monitor

Example using relay1 OID:

Select a Comet System H0530 environmental monitor (temperature/relay) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type relay1 into the Find box to locate it in the OID tree, then select it and click OK. It reports the relay 1 status. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
comet	1.3.6.1.4.1.22626
products	1.3.6.1.4.1.22626.1
h0530	1.3.6.1.4.1.22626.1.2
readings	1.3.6.1.4.1.22626.1.2.1
STR temperature	1.3.6.1.4.1.22626.1.2.1.1	DisplayString	read-only	Temperature
INT relay1Ex	1.3.6.1.4.1.22626.1.2.1.5	INTEGER	read-only	Relay 1 status
INT relay2	1.3.6.1.4.1.22626.1.2.1.6	INTEGER	read-only	Relay 2 status
INT input1	1.3.6.1.4.1.22626.1.2.1.7	INTEGER	read-only	Binary Input 1
INT input2	1.3.6.1.4.1.22626.1.2.1.8	INTEGER	read-only	Binary Input 2
INT input3	1.3.6.1.4.1.22626.1.2.1.9	INTEGER	read-only	Binary Input 3
settings	1.3.6.1.4.1.22626.1.2.2
STR tempLow	1.3.6.1.4.1.22626.1.2.2.1	DisplayString	read-only	Temperature Limit Low
STR tempHigh	1.3.6.1.4.1.22626.1.2.2.2	DisplayString	read-only	Temperature Limit High
INT tempTime	1.3.6.1.4.1.22626.1.2.2.7	INTEGER	read-only	Temperature alaram delay
STR tempHyst	1.3.6.1.4.1.22626.1.2.2.10	DisplayString	read-only	Temperature hysteresis
STR relay1Alarm	1.3.6.1.4.1.22626.1.2.2.17	DisplayString	read-only	Relay 1 alarm
STR relay2Alarm	1.3.6.1.4.1.22626.1.2.2.18	DisplayString	read-only	Relay 2 alarm
STR relay1Hyst	1.3.6.1.4.1.22626.1.2.2.19	DisplayString	read-only	Relay 1 hysteresis
STR relay2Hyst	1.3.6.1.4.1.22626.1.2.2.20	DisplayString	read-only	Relay 2 hysteresis
INT relay1Time	1.3.6.1.4.1.22626.1.2.2.21	INTEGER	read-only	Relay 1 alaram delay
INT relay2Time	1.3.6.1.4.1.22626.1.2.2.22	INTEGER	read-only	Relay 2 alaram delay
INT input1Time	1.3.6.1.4.1.22626.1.2.2.23	INTEGER	read-only	Binary Input 1 alaram delay
INT input2Time	1.3.6.1.4.1.22626.1.2.2.24	INTEGER	read-only	Binary Input 2 alaram delay
INT input3Time	1.3.6.1.4.1.22626.1.2.2.25	INTEGER	read-only	Binary Input 3 alaram delay
readingsint	1.3.6.1.4.1.22626.1.2.3
INT temperaturei	1.3.6.1.4.1.22626.1.2.3.1	INTEGER	read-only	Temperature *10
settingsint	1.3.6.1.4.1.22626.1.2.4
INT tempLowi	1.3.6.1.4.1.22626.1.2.4.1	INTEGER	read-write	Temperature Limit Low *10
INT tempHighi	1.3.6.1.4.1.22626.1.2.4.2	INTEGER	read-write	Temperature Limit High *10
INT tempTimei	1.3.6.1.4.1.22626.1.2.4.7	INTEGER	read-write	Temperature alaram delay
INT tempHysti	1.3.6.1.4.1.22626.1.2.4.10	INTEGER	read-write	Temperature hysteresis *10
INT input1Timei	1.3.6.1.4.1.22626.1.2.4.17	INTEGER	read-write	Binary Input 1 alaram delay
INT input2Timei	1.3.6.1.4.1.22626.1.2.4.18	INTEGER	read-write	Binary Input 2 alaram delay
INT input3Timei	1.3.6.1.4.1.22626.1.2.4.19	INTEGER	read-write	Binary Input 3 alaram delay
traps	1.3.6.1.4.1.22626.1.2.5
STR messageString	1.3.6.1.4.1.22626.1.2.5.1	DisplayString	read-only	Message giving more detailed information on alarms.
INT alarmTemperature	1.3.6.1.4.1.22626.1.2.5.2	INTEGER	read-only	Temperature alarm 0 = Temperature OK 1 = Temperature too high 2 = Temperature too low
tables	1.3.6.1.4.1.22626.1.2.6
historyTable	1.3.6.1.4.1.22626.1.2.6.1		not-accessible	Table of the history values.
historyEntry	1.3.6.1.4.1.22626.1.2.6.1.1		not-accessible	History values entries.
INT histTemperature	1.3.6.1.4.1.22626.1.2.6.1.1.1	INTEGER	read-only	Temperature reading.
INT histRelay1	1.3.6.1.4.1.22626.1.2.6.1.1.5	INTEGER	read-only	Relay 1 reading.
INT histRelay2	1.3.6.1.4.1.22626.1.2.6.1.1.6	INTEGER	read-only	Relay 2 reading.
INT histInput1	1.3.6.1.4.1.22626.1.2.6.1.1.7	INTEGER	read-only	Binary Input 1 reading.
INT histInput2	1.3.6.1.4.1.22626.1.2.6.1.1.8	INTEGER	read-only	Binary Input 2 reading.
INT histInput3	1.3.6.1.4.1.22626.1.2.6.1.1.9	INTEGER	read-only	Binary Input 3 reading.

RFC description

Comet H0530 sensor monitoring for temperature, relay status, and binary inputs with configurable thresholds.

Start monitoring Comet System H0530 environmental monitor (temperature/relay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H0530-MIB