T0510-MIB DEFINITIONS ::= BEGIN


IMPORTS
	enterprises
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212;
  
  DisplayString ::= OCTET STRING


comet         OBJECT IDENTIFIER ::= { enterprises 22626 }
products      OBJECT IDENTIFIER ::= { comet 1 }
t0510         OBJECT IDENTIFIER ::= { products 2 }
readings      OBJECT IDENTIFIER ::= { t0510 1 }
settings      OBJECT IDENTIFIER ::= { t0510 2 }
readingsint   OBJECT IDENTIFIER ::= { t0510 3 }
settingsint   OBJECT IDENTIFIER ::= { t0510 4 }
traps         OBJECT IDENTIFIER ::= { t0510 5 }
tables	      OBJECT IDENTIFIER ::= { t0510 6 }

-- Power Source MIB
-- Parameters (Prefix ps)

temperature OBJECT-TYPE
	SYNTAX  	DisplayString (SIZE (0..8))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Temperature"
::= { readings 1 }

-----------------------------------------------------------------------
-- settings
-----------------------------------------------------------------------

templow OBJECT-TYPE
	SYNTAX  	DisplayString (SIZE (0..8))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Temperature Limit Low"
::= { settings 1 }

temphigh OBJECT-TYPE
	SYNTAX  	DisplayString (SIZE (0..8))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Temperature Limit High"
::= { settings 2 }

temptime OBJECT-TYPE
	SYNTAX		INTEGER (0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Temperature alaram delay"
::= { settings 7 }

tempHyst OBJECT-TYPE
	SYNTAX  	DisplayString (SIZE (0..8))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Temperature hysteresis"
::= { settings 10 }

-----------------------------------------------------------------------
-- readingsint
-----------------------------------------------------------------------
temperaturei OBJECT-TYPE
	SYNTAX  	INTEGER(-2000..6000)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Temperature *10"
::= { readingsint 1 }

-----------------------------------------------------------------------
-- settingsint
-----------------------------------------------------------------------
templowi OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Temperature Limit Low *10"
::= { settingsint 1 }

temphighi OBJECT-TYPE
	SYNTAX  	INTEGER(-2000..6000)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Temperature Limit High *10"
::= { settingsint 2 }

humiditylowi OBJECT-TYPE
	SYNTAX  	INTEGER(-2000..6000)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Humidity Limit Low *10"
::= { settingsint 3 }

temptimei OBJECT-TYPE
	SYNTAX		INTEGER (0..65535)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Temperature alaram delay"
::= { settingsint 7 }

tempHysti OBJECT-TYPE
	SYNTAX  	INTEGER(-2000..6000)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Temperature hysteresis *10"
::= { settingsint 10 }

humidityHysti OBJECT-TYPE
	SYNTAX  	INTEGER(-2000..6000)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Humidity hysteresis *10"
::= { settingsint 11 }

-----------------------------------------------------------------------
messageString OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..30))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Message giving more detailed information on alarms."
::= { traps 1 }

alarmTemperature OBJECT-TYPE
	SYNTAX  	INTEGER(0..2)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Temperature alarm
0 = temperature OK
1 = temperature too high
2 = temperature too low"
::= { traps 2 }

historyTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF HistoryEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION	"Table of the history values."
::= { tables 1 }

historyEntry OBJECT-TYPE
	SYNTAX  HistoryEntry
	ACCESS  not-accessible
	STATUS  optional
	DESCRIPTION	"History values entries."
	INDEX   { histtemperature }
::= { historyTable 1 }

HistoryEntry ::=
	SEQUENCE {
		histtemperature INTEGER
		}

histtemperature OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION	"Temperature reading."
::= { historyEntry 1 }

END