SYMMCOMMONNETWORK

All MIBs › SYMMCOMMONNETWORK

Organization: Symmetricom

Last Updated: 2018-06-28

Category: Timing and Synchronization

Description: Manages Symmetricom network timing reference sources, priority, and synchronization selection.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SYMMCOMMONNETWORK?

SYMMCOMMONNETWORK is a Symmetricom (precision timing/synchronization vendor) proprietary MIB providing common Ethernet, IPv4, and VLAN configuration/status shared across Symmetricom timing products. Its objects cover an Ethernet-link table (speed, status), auto-negotiation table (state, speed), an IPv4-configuration table (address origin, address, default route, subnet mask, port state), and an IPv4 static-route table (interface index, destination address, mask, next hop). As a configuration/status MIB it lets an administrator confirm a Symmetricom timing appliance's network-layer configuration and link state. It is deployed on Symmetricom precision-timing appliances. Engineers can download the SYMMCOMMONNETWORK file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SYMMCOMMONNETWORK. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Symmetricom precision-timing appliances

Monitoring Examples

An administrator checks networkEthLinkStatus and networkIPv4Address to confirm network connectivity is up and correctly addressed on a Symmetricom timing appliance.

What Can Be Monitored

Ethernet link state and IPv4 configuration

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From IF-MIB

ifIndex	OBJECT-TYPE
ifNumber	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddressIPv4
InetAddressIPv6
InetAddressIPv6z
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

From SYMM-COMMON-SMI

EnableValue
symmNetwork	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
symmCommonNetwork	1.3.6.1.4.1.9070.1.2.5.4.1			This is the Symmetricom Common MIB for Ethernet and IP configuration and status. It has three main nodes: 1. Ethernet configuration 2. IP configuration and status (including routing and firewall) 3. VLAN configuration
networkEthStatus	1.3.6.1.4.1.9070.1.2.5.4.1.1
networkEthLinkTable	1.3.6.1.4.1.9070.1.2.5.4.1.1.1		not-accessible	The Ethernet port link table of the TP5000 device.
networkEthLinkEntry	1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1		not-accessible	The ethernet link table.
I32 networkEthLinkIndex	1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.1	Integer32	not-accessible	The index of ethernet link table.
ETH networkEthLinkSpeed	1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.2	ETHAUTOSPEEDTYPE	read-only	The ethernet auto-negotiation speed. The defined speeds are 100M, 1000M, or none
ETH networkEthLinkStatus	1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.3	ETHLINKSTATUS	read-only	Eth port link status, UP or DOWN
networkEthConfig	1.3.6.1.4.1.9070.1.2.5.4.1.2
networkEthAutoNegTable	1.3.6.1.4.1.9070.1.2.5.4.1.2.1		not-accessible	Ethernet port auto-negotiation table for common network.
networkEthAutoNegEntry	1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1		not-accessible	An entry of Ethernet port auto-negotiation table. Table index is ifIndex (port/interface index).
I32 networkEthAutoNegIndex	1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.1	Integer32	not-accessible	Local index of the Ethernet port auto-negotiation table.
ENA networkEthAutoNegState	1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.2	EnableValue	read-write	Ethernet port auto-negotiation state can be Enable (1) or Disable (2).
AUT networkEthAutoNegSpeed	1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.3	AutoSpeedValue	read-write	Advertised speed for Ethernet port auto-negotiation. Its value can be 100M, 1000M, or All.
networkIpConfig	1.3.6.1.4.1.9070.1.2.5.4.1.3
networkIPv4ConfigTable	1.3.6.1.4.1.9070.1.2.5.4.1.3.1		not-accessible	IPv4 interface configuration table for common network. It is used to read or write the IP address of the specified interface.
networkIPv4ConfigEntry	1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1		not-accessible	An entry of the IPv4 interface configuration table. Table index is ifIndex (port/interface index).
I32 networkIPv4ConfigIndex	1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.1	Integer32	not-accessible	IPv4 Local Index
NUM networkIPv4AddressOrigin	1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.2	IpAddressOriginTC	read-write	The origin of this IPv4 address can be one of the following: -manual(2) indicates that the address was manually configured to a specified address, e.g., by user configuration. -dhcp(4) indicates an address that was assigned to this system by a DHCP server. -linklayer(5) indicates an address created by IPv6 stateless auto-configuration. -random(6) indicates an address chosen by the system at random, e.g., an IPv4 address within 169.254/16, or an RFC 3041 privacy address. See existing object description
IP networkIPv4Address	1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.3	IpAddress	read-write	The IP address to which this entry's addressing information pertains. Implementers need to be aware that if the size ipAddressAddr exceeds 116 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3
IP networkIPv4DefaultRouteAddr	1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.4	IpAddress	read-write	The IP address of the default router represented by this row. The address type of this object is specified in symmIPAddressType. Implementers need to be aware that if the size of ipDefaultRouterAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
IP networkIPv4SubnetMask	1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.5	IpAddress	read-write	The mask of an IPv4 interface. The address format is : xxx.xxx.xxx.xxx.
IPP networkIPv4PortState	1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.6	IPPortStateValue	read-write	The IP interface state can be Enable (1) or Disable (2).
networkIPv4StaticRouteTable	1.3.6.1.4.1.9070.1.2.5.4.1.3.2		not-accessible	The static route table is dynamic; its number of entries is not fixed. It is used to read or create a static route for the specified interface.
networkIPv4StaticRouteEntry	1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1		not-accessible	An entry of the IPv4 static route table. Table index is a double index: ifIndex and the local index networkIPv4StaticRouteIndex.
I32 networkIPv4StaticRouteIndex	1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.1	Integer32	read-only	Local index of the static route table.
I32 networkIPv4StaticRouteIfindex	1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.2	Integer32	read-create	IfIndex of the static route table.
IP networkIPv4StaticDestAddr	1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.3	IpAddress	read-create	The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
IP networkIPv4StaticRouteMask	1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.4	IpAddress	read-create	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
IP networkIPv4StaticRouteNextHop	1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.5	IpAddress	read-create	The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
INT networkIPv4StaticRouteMetric1	1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.6	INTEGER	read-create	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
ROW networkIPv4StaticRouteRowStatus	1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.7	RowStatus	read-create	The row status of the IPv4 static route table is used to control row action. It has six defined action values: - `active(1)', which indicates that the conceptual row is available for use by the managed device; - `notInService(2)', which indicates that the conceptual row exists in the agent, but it is unavailable for use by the managed device; - `notReady(3)', which indicates that the conceptual row exists in the agent, but it does not have all information necessary for the row to be available for use by the managed device; - `createAndGo(4)', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `createAndWait(5)', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by managed device); and, - `destroy(6)', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
networkFirewallTable	1.3.6.1.4.1.9070.1.2.5.4.1.3.3		not-accessible	This is the firewall configuration table for TP5000 external management port on the main shelf IMC module.
networkFirewallEntry	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1		not-accessible	An entry of the firewall configuration table. Table index is ifIndex.
I32 networkFirewallIndex	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.1	Integer32	not-accessible	Local index of the port Firewall table.
FIR networkFirewallICMP	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.2	FirewallOnOff	read-write	Firewall control for ICMP. Value is Allow (1) or Block (2).
FIR networkFirewallTelnet	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.3	FirewallOnOff	read-write	Firewall control for Telnet. Value is Allow (1) or Block (2).
FIR networkFirewallSSH	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.4	FirewallOnOff	read-write	Firewall control for SSH. Value is Allow (1) or Block (2).
FIR networkFirewallSFTP	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.5	FirewallOnOff	read-write	Firewall control for SFTP. Value is Allow (1) or Block (2).
FIR networkFirewallSNMP	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.6	FirewallOnOff	read-write	Firewall control for SNMP. Value is Allow (1) or Block (2).
FIR networkFirewallFTP	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.7	FirewallOnOff	read-write	Firewall control for FTP. Value is Allow (1) or Block (2).
FIR networkFirewallNTP	1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.8	FirewallOnOff	read-write	Firewall control for NTP. Value is Allow (1) or Block (2).
networkIPv6ConfigTable	1.3.6.1.4.1.9070.1.2.5.4.1.3.4		not-accessible	Description.
networkIPv6ConfigEntry	1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1		not-accessible	Description.
I32 networkIPv6ConfigIndex	1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.1	Integer32	not-accessible	Description.
NUM networkIPv6AddressOrigin	1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.2	IpAddressOriginTC	read-write	The origin of this IPV6 address
ADR networkIPv6Address	1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.3	InetAddressIPv6	read-write	The IPV6 address to which this entry's addressing information pertains
I32 networkIPv6Prefix	1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.4	Integer32	read-write	Prefix of IPv6
ADR networkIPv6DefaultRouteAddr	1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.5	InetAddressIPv6	read-write	The IPv6 default router address. Format 2x:2x:2x:2x:2x:2x:2x:2x
IPP networkIPv6PortState	1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.6	IPPortStateValue	read-write	The IP interface state can be Enable(1) or Disable(2)
networkIPv6StaticRouteTable	1.3.6.1.4.1.9070.1.2.5.4.1.3.5		not-accessible	Description.
networkIPv6StaticRouteEntry	1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1		not-accessible	Description.
I32 networkIPv6StaticRouteIndex	1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.1	Integer32	read-only	Description.
I32 networkIPv6StaticRouteIfindex	1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.2	Integer32	read-create	Description.
ADR networkIPv6StaticRouteDestAddr	1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.3	InetAddressIPv6	read-create	The destination IP address of this route
I32 networkIPv6StaticRoutePrefix	1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.4	Integer32	read-create	Description
ADR networkIPv6StaticRouteNextHop	1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.5	InetAddressIPv6z	read-create	The IPv6 address of the next hop of this route.
INT networkIPv6StaticRouteMetric1	1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.6	INTEGER	read-create	The Primary routing metric for this route. The semantics of this metric are determined by the routing protocal specified in the route's ipRouteProto value.
ROW networkIPv6StaticRouteRowStatus	1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.7	RowStatus	read-create	The row status of the IPv6 static route table is used to control row action It has six defined action values - active(1) - notInService(2) - notReady(3) - createAndGo(4) - createAndWait(5) - destroy(6)
networkIPVerTable	1.3.6.1.4.1.9070.1.2.5.4.1.3.6		not-accessible	IP version of available interfaces
networkIPVerEntry	1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1		not-accessible	Description.
I32 networkIPVerIndex	1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1.1	Integer32	not-accessible	Description.
IPt networkIPVersion	1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1.2	InetAddressType	read-write	IP version of this interface
networkIPv6AutoConfigTable	1.3.6.1.4.1.9070.1.2.5.4.1.3.7		not-accessible	Description.
networkIPv6AutoConfigEntry	1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1		not-accessible	Description.
I32 networkIPv6AutoConfigIndex	1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1.1	Integer32	not-accessible	Description.
ENA networkIPv6AutoConfigMode	1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1.2	EnableValue	read-write	Description.
networkVlanConfig	1.3.6.1.4.1.9070.1.2.5.4.1.4
networkIPStatus	1.3.6.1.4.1.9070.1.2.5.4.1.5
networkIPv4StatusTable	1.3.6.1.4.1.9070.1.2.5.4.1.5.1		not-accessible	Description.
networkIPv4StatusEntry	1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1		not-accessible	Description.
I32 networkIPv4StatusIndex	1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.1	Integer32	not-accessible	Description.
TPM networkIPv4Module	1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.2	TPMODULEID	read-only	Description.
I32 networkIPv4VlanID	1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.3	Integer32	read-only	Description.
ADR networkIPv4Addr	1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.4	InetAddressIPv4	read-only	Description.
ADR networkIPv4Netmask	1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.5	InetAddressIPv4	read-only	Description.
ADR networkIPv4RouteAddr	1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.6	InetAddressIPv4	read-only	Description.
NUM networkIPv4Mode	1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.7	IpAddressOriginTC	read-only	The origin of this IPv4 address can be one of the following: -manual(2) indicates that the address was manually configured to a specified address, e.g., by user configuration. -dhcp(4) indicates an address that was assigned to this system by a DHCP server. -linklayer(5) indicates an address created by IPv6 stateless auto-configuration. -random(6) indicates an address chosen by the system at random, e.g., an IPv4 address within 169.254/16, or an RFC 3041 privacy address. See existing object description
networkIPv6StatusTable	1.3.6.1.4.1.9070.1.2.5.4.1.5.2		not-accessible	Description.
networkIPv6StatusEntry	1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1		not-accessible	Description.
I32 networkIPv6StatusIndex	1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.1	Integer32	not-accessible	Description.
TPM networkIPv6Module	1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.2	TPMODULEID	read-only	Description.
I32 networkIPv6VlanID	1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.3	Integer32	read-only	Description.
ADR networkIPv6Addr	1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.4	InetAddressIPv6	read-only	Description.
ADR networkIPv6PrefixLength	1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.5	InetAddressPrefixLength	read-only	Description.
IPV networkIPv6AddrScope	1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.6	IPV6SCOPE	read-only	Description.
NUM networkIPv6Mode	1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.7	IpAddressOriginTC	read-only	Description.
networkConformance	1.3.6.1.4.1.9070.1.2.5.4.1.6			This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module.
networkCompliances	1.3.6.1.4.1.9070.1.2.5.4.1.6.1
networkBasicCompliance	1.3.6.1.4.1.9070.1.2.5.4.1.6.1.1			The compliance statement for SNMP entities which have common network of symmetricom.
networkUocGroups	1.3.6.1.4.1.9070.1.2.5.4.1.6.2
networkEthAutoNetGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.1			A collection of objects providing information applicable to ethernet auto-negotiation configuration group.
networkIPv4ConfigGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.2			A collection of objects providing information applicable to IP configuration group.
networkFirewallGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.3			A collection of objects providing information applicable to firewall group.
networkIPv4StaticRouteGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.4			Description.
networkEthStatusGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.5			Description.
networkIPv6ConfigGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.6			Description.
networkIPv6StaticRouteGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.7			Description.
networkIPVersionGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.8			Description.
networkIPv6AutoConfigGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.9			Description.
networkIPv4StatusGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.10			Description.
networkIPv6StatusGroup	1.3.6.1.4.1.9070.1.2.5.4.1.6.2.11			Description.

RFC description

Symmetricom common MIB for Ethernet, IP configuration, routing, firewall, and VLAN management across network devices.

Start monitoring Symmetricom precision-timing appliances (Ethernet/IPv4/VLAN config and status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SYMMCOMMONNETWORK

What Is SYMMCOMMONNETWORK?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description