-- -- SYMMCOMMONNETWORK.mib -- MIB generated by MG-SOFT Visual MIB Builder 2013 (64-bit) Version 9.0 Build 760 -- Tuesday, April 10, 2018 at 20:53:14 -- -- SYMMCOMMONNETWORK.mib -- MIB generated by MG-SOFT Visual MIB Builder 2013 (64-bit) Version 9.0 Build 760 -- Tuesday, August 11, 2015 at 14:44:58 -- -- SYMMCOMMONNETWORK.my -- MIB generated by MG-SOFT Visual MIB Builder 2013 (64-bit) Version 9.0 Build 760 -- Thursday, August 06, 2015 at 12:12:27 -- -- SYMMCOMMONNETWORK.mib -- MIB generated by MG-SOFT Visual MIB Builder 2013 (64-bit) Version 9.0 Build 760 -- Wednesday, July 29, 2015 at 12:10:07 -- -- SYMMCOMMONNETWORK.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Friday, July 22, 2011 at 16:43:22 -- -- SYMMCOMMONNETWORK.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Tuesday, June 14, 2011 at 18:03:17 -- -- SYMMNETWORK.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Friday, March 18, 2011 at 17:14:26 -- SYMMCOMMONNETWORK DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex FROM ENTITY-MIB ifNumber, ifIndex FROM IF-MIB InetAddressIPv4, InetAddressIPv6, InetAddressIPv6z, InetAddressType,InetAddressPrefixLength FROM INET-ADDRESS-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC symmNetwork, EnableValue FROM SYMM-COMMON-SMI; -- 1.3.6.1.4.1.9070.1.2.5.4.1 -- February 24, 2011 at 17:47 GMT -- 1.3.6.1.4.1.9070.1.2.5.4.1 -- February 24, 2011 at 17:46 GMT -- February 24, 2011 at 17:47 GMT -- 1.3.6.1.4.1.9070.1.2.5.4.1 -- August 06, 2015 at 12:02 GMT -- 1.3.6.1.4.1.9070.1.2.5.4.1 symmCommonNetwork MODULE-IDENTITY LAST-UPDATED "201806280521Z" -- June 28, 2018 at 05:21 GMT ORGANIZATION "Symmetricom" CONTACT-INFO "Symmetricom Technical Support 1-888-367-7966 toll free USA 1-408-428-7907 worldwide Support@symmetricom.com" DESCRIPTION "This is the Symmetricom Common MIB for Ethernet and IP configuration and status. It has three main nodes: 1. Ethernet configuration 2. IP configuration and status (including routing and firewall) 3. VLAN configuration " REVISION "201804102053Z" -- April 10, 2018 at 20:53 GMT DESCRIPTION "Symmetricom common Common network" ::= { symmNetwork 1 } -- -- Type definitions -- -- Type definitions -- AutoSpeedValue ::= INTEGER { eth100m(1), eth1000m(2), all(3), unknown(4) } IpAddressOriginTC ::= INTEGER { other(1), manual(2), dhcp(4), linklayer(5), random(6) } IPPortStateValue ::= INTEGER { enable(1), disable(2), restart(3) } FirewallOnOff ::= INTEGER { allow(1), block(2) } ETHAUTOSPEEDTYPE ::= INTEGER { eth100m(1), eth1000m(2), all(3), unknown(4) } ETHLINKSTATUS ::= INTEGER { ethUp(1), ethDown(2) } TPMODULEID ::= INTEGER { imc(1), ioc1(2), ioc2(3), exp0(6), exp1(7), exp2(8), exp3(9), exp4(10), exp5(11), exp6(12), exp7(13), exp8(14), exp9(15) } -- From RFC 3513 IPV6SCOPE ::= INTEGER { interface-local(1), link-local(2), site-local(5), global(14) } -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- DateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" STATUS current DESCRIPTION "A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present." SYNTAX OCTET STRING (SIZE (8 | 11)) TLatAndLon ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d:1d.1d" STATUS current DESCRIPTION "antenna latitude and longitude specification. field octets contents range ----- ------ -------- ----- 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss " SYNTAX OCTET STRING (SIZE (5)) TAntHeight ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a2d.1d" STATUS current DESCRIPTION "antenna height specification. field octets contents range ----- ------ -------- ----- 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh " SYNTAX OCTET STRING (SIZE (4)) TLocalTimeOffset ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d" STATUS current DESCRIPTION "A local time offset specification. field octets contents range ----- ------ -------- ----- 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours range is 0..13 For example, the -6 local time offset would be displayed as: -6:0 " SYNTAX OCTET STRING (SIZE (3)) TSsm ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "The ssm hex code" SYNTAX INTEGER (0..255) -- -- Node definitions -- -- 1.3.6.1.4.1.9070.1.2.5.4.1.1 networkEthStatus OBJECT IDENTIFIER ::= { symmCommonNetwork 1 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.4.6 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1 networkEthLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkEthLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ethernet port link table of the TP5000 device." ::= { networkEthStatus 1 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.4.6.1 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1 networkEthLinkEntry OBJECT-TYPE SYNTAX NetworkEthLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ethernet link table." INDEX { ifIndex, networkEthLinkIndex } ::= { networkEthLinkTable 1 } NetworkEthLinkEntry ::= SEQUENCE { networkEthLinkIndex Integer32, networkEthLinkSpeed ETHAUTOSPEEDTYPE, networkEthLinkStatus ETHLINKSTATUS } -- 1.3.6.1.4.1.9070.1.2.4.6.3.4.6.1.1 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1.1 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1.1 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1.1 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.1 networkEthLinkIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of ethernet link table." ::= { networkEthLinkEntry 1 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.4.6.1.6 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1.4 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1.4 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1.4 -- 1.3.6.1.4.1.9070.1.2.4.6.2.3.2.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.2 networkEthLinkSpeed OBJECT-TYPE SYNTAX ETHAUTOSPEEDTYPE MAX-ACCESS read-only STATUS current DESCRIPTION "The ethernet auto-negotiation speed. The defined speeds are 100M, 1000M, or none" ::= { networkEthLinkEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.3 networkEthLinkStatus OBJECT-TYPE SYNTAX ETHLINKSTATUS MAX-ACCESS read-only STATUS current DESCRIPTION "Eth port link status, UP or DOWN" ::= { networkEthLinkEntry 3 } -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.9070.1.2.5.4.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2 networkEthConfig OBJECT IDENTIFIER ::= { symmCommonNetwork 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1 networkEthAutoNegTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkEthAutoNegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet port auto-negotiation table for common network." ::= { networkEthConfig 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1 networkEthAutoNegEntry OBJECT-TYPE SYNTAX NetworkEthAutoNegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Ethernet port auto-negotiation table. Table index is ifIndex (port/interface index)." INDEX { ifIndex, networkEthAutoNegIndex } ::= { networkEthAutoNegTable 1 } NetworkEthAutoNegEntry ::= SEQUENCE { networkEthAutoNegIndex Integer32, networkEthAutoNegState EnableValue, networkEthAutoNegSpeed AutoSpeedValue } -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.1 networkEthAutoNegIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the Ethernet port auto-negotiation table." ::= { networkEthAutoNegEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.2 networkEthAutoNegState OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet port auto-negotiation state can be Enable (1) or Disable (2)." ::= { networkEthAutoNegEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.3 networkEthAutoNegSpeed OBJECT-TYPE SYNTAX AutoSpeedValue MAX-ACCESS read-write STATUS current DESCRIPTION "Advertised speed for Ethernet port auto-negotiation. Its value can be 100M, 1000M, or All." ::= { networkEthAutoNegEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3 networkIpConfig OBJECT IDENTIFIER ::= { symmCommonNetwork 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1 networkIPv4ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkIPv4ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv4 interface configuration table for common network. It is used to read or write the IP address of the specified interface." ::= { networkIpConfig 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1 networkIPv4ConfigEntry OBJECT-TYPE SYNTAX NetworkIPv4ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the IPv4 interface configuration table. Table index is ifIndex (port/interface index)." INDEX { ifIndex, networkIPv4ConfigIndex } ::= { networkIPv4ConfigTable 1 } NetworkIPv4ConfigEntry ::= SEQUENCE { networkIPv4ConfigIndex Integer32, networkIPv4AddressOrigin IpAddressOriginTC, networkIPv4Address IpAddress, networkIPv4DefaultRouteAddr IpAddress, networkIPv4SubnetMask IpAddress, networkIPv4PortState IPPortStateValue } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.1 networkIPv4ConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv4 Local Index" ::= { networkIPv4ConfigEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.2 networkIPv4AddressOrigin OBJECT-TYPE SYNTAX IpAddressOriginTC MAX-ACCESS read-write STATUS current DESCRIPTION "The origin of this IPv4 address can be one of the following: -manual(2) indicates that the address was manually configured to a specified address, e.g., by user configuration. -dhcp(4) indicates an address that was assigned to this system by a DHCP server. -linklayer(5) indicates an address created by IPv6 stateless auto-configuration. -random(6) indicates an address chosen by the system at random, e.g., an IPv4 address within 169.254/16, or an RFC 3041 privacy address. See existing object description " ::= { networkIPv4ConfigEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.3 networkIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains. Implementers need to be aware that if the size ipAddressAddr exceeds 116 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3 " ::= { networkIPv4ConfigEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.4 networkIPv4DefaultRouteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the default router represented by this row. The address type of this object is specified in symmIPAddressType. Implementers need to be aware that if the size of ipDefaultRouterAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." ::= { networkIPv4ConfigEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.5 networkIPv4SubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The mask of an IPv4 interface. The address format is : xxx.xxx.xxx.xxx. " ::= { networkIPv4ConfigEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.6 networkIPv4PortState OBJECT-TYPE SYNTAX IPPortStateValue MAX-ACCESS read-write STATUS current DESCRIPTION "The IP interface state can be Enable (1) or Disable (2)." ::= { networkIPv4ConfigEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2 networkIPv4StaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkIPv4StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The static route table is dynamic; its number of entries is not fixed. It is used to read or create a static route for the specified interface." ::= { networkIpConfig 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1 networkIPv4StaticRouteEntry OBJECT-TYPE SYNTAX NetworkIPv4StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the IPv4 static route table. Table index is a double index: ifIndex and the local index networkIPv4StaticRouteIndex." INDEX { ifIndex, networkIPv4StaticRouteIndex } ::= { networkIPv4StaticRouteTable 1 } NetworkIPv4StaticRouteEntry ::= SEQUENCE { networkIPv4StaticRouteIndex Integer32, networkIPv4StaticRouteIfindex Integer32, networkIPv4StaticDestAddr IpAddress, networkIPv4StaticRouteMask IpAddress, networkIPv4StaticRouteNextHop IpAddress, networkIPv4StaticRouteMetric1 INTEGER, networkIPv4StaticRouteRowStatus RowStatus } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.1 networkIPv4StaticRouteIndex OBJECT-TYPE SYNTAX Integer32 (1..500) MAX-ACCESS read-only STATUS current DESCRIPTION "Local index of the static route table." ::= { networkIPv4StaticRouteEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.2 networkIPv4StaticRouteIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "IfIndex of the static route table." ::= { networkIPv4StaticRouteEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.3 networkIPv4StaticDestAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { networkIPv4StaticRouteEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.4 networkIPv4StaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { networkIPv4StaticRouteEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.5 networkIPv4StaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)" ::= { networkIPv4StaticRouteEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.6 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.6 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.6 networkIPv4StaticRouteMetric1 OBJECT-TYPE SYNTAX INTEGER (-1..65534) MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { networkIPv4StaticRouteEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.7 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.2.1.7 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.7 networkIPv4StaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of the IPv4 static route table is used to control row action. It has six defined action values: - `active(1)', which indicates that the conceptual row is available for use by the managed device; - `notInService(2)', which indicates that the conceptual row exists in the agent, but it is unavailable for use by the managed device; - `notReady(3)', which indicates that the conceptual row exists in the agent, but it does not have all information necessary for the row to be available for use by the managed device; - `createAndGo(4)', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `createAndWait(5)', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by managed device); and, - `destroy(6)', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. " ::= { networkIPv4StaticRouteEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3 networkFirewallTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkFirewallEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the firewall configuration table for TP5000 external management port on the main shelf IMC module." ::= { networkIpConfig 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1 networkFirewallEntry OBJECT-TYPE SYNTAX NetworkFirewallEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the firewall configuration table. Table index is ifIndex." INDEX { ifIndex, networkFirewallIndex } ::= { networkFirewallTable 1 } NetworkFirewallEntry ::= SEQUENCE { networkFirewallIndex Integer32, networkFirewallICMP FirewallOnOff, networkFirewallTelnet FirewallOnOff, networkFirewallSSH FirewallOnOff, networkFirewallSFTP FirewallOnOff, networkFirewallSNMP FirewallOnOff, networkFirewallFTP FirewallOnOff, networkFirewallNTP FirewallOnOff } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.1 networkFirewallIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the port Firewall table." ::= { networkFirewallEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.2 networkFirewallICMP OBJECT-TYPE SYNTAX FirewallOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Firewall control for ICMP. Value is Allow (1) or Block (2)." ::= { networkFirewallEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.3 networkFirewallTelnet OBJECT-TYPE SYNTAX FirewallOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Firewall control for Telnet. Value is Allow (1) or Block (2)." ::= { networkFirewallEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.4 networkFirewallSSH OBJECT-TYPE SYNTAX FirewallOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Firewall control for SSH. Value is Allow (1) or Block (2)." ::= { networkFirewallEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.5 networkFirewallSFTP OBJECT-TYPE SYNTAX FirewallOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Firewall control for SFTP. Value is Allow (1) or Block (2)." ::= { networkFirewallEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.6 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.6 networkFirewallSNMP OBJECT-TYPE SYNTAX FirewallOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Firewall control for SNMP. Value is Allow (1) or Block (2)." ::= { networkFirewallEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.6 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.3.1.7 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.7 networkFirewallFTP OBJECT-TYPE SYNTAX FirewallOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Firewall control for FTP. Value is Allow (1) or Block (2)." ::= { networkFirewallEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.8 networkFirewallNTP OBJECT-TYPE SYNTAX FirewallOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Firewall control for NTP. Value is Allow (1) or Block (2)." ::= { networkFirewallEntry 8 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.2.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.4 networkIPv6ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkIPv6ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIpConfig 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1 networkIPv6ConfigEntry OBJECT-TYPE SYNTAX NetworkIPv6ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { ifIndex, networkIPv6ConfigIndex } ::= { networkIPv6ConfigTable 1 } NetworkIPv6ConfigEntry ::= SEQUENCE { networkIPv6ConfigIndex Integer32, networkIPv6AddressOrigin IpAddressOriginTC, networkIPv6Address InetAddressIPv6, networkIPv6Prefix Integer32, networkIPv6DefaultRouteAddr InetAddressIPv6, networkIPv6PortState IPPortStateValue } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.1 networkIPv6ConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIPv6ConfigEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.2 networkIPv6AddressOrigin OBJECT-TYPE SYNTAX IpAddressOriginTC MAX-ACCESS read-write STATUS current DESCRIPTION "The origin of this IPV6 address " ::= { networkIPv6ConfigEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.3 networkIPv6Address OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The IPV6 address to which this entry's addressing information pertains" ::= { networkIPv6ConfigEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.4 networkIPv6Prefix OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "Prefix of IPv6 " ::= { networkIPv6ConfigEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.5 networkIPv6DefaultRouteAddr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 default router address. Format 2x:2x:2x:2x:2x:2x:2x:2x" ::= { networkIPv6ConfigEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.6 networkIPv6PortState OBJECT-TYPE SYNTAX IPPortStateValue MAX-ACCESS read-write STATUS current DESCRIPTION "The IP interface state can be Enable(1) or Disable(2)" ::= { networkIPv6ConfigEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5 networkIPv6StaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkIPv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIpConfig 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1 networkIPv6StaticRouteEntry OBJECT-TYPE SYNTAX NetworkIPv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { ifIndex, networkIPv6StaticRouteIndex } ::= { networkIPv6StaticRouteTable 1 } NetworkIPv6StaticRouteEntry ::= SEQUENCE { networkIPv6StaticRouteIndex Integer32, networkIPv6StaticRouteIfindex Integer32, networkIPv6StaticRouteDestAddr InetAddressIPv6, networkIPv6StaticRoutePrefix Integer32, networkIPv6StaticRouteNextHop InetAddressIPv6z, networkIPv6StaticRouteMetric1 INTEGER, networkIPv6StaticRouteRowStatus RowStatus } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.1 networkIPv6StaticRouteIndex OBJECT-TYPE SYNTAX Integer32 (1..500) MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv6StaticRouteEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.2 networkIPv6StaticRouteIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Description." ::= { networkIPv6StaticRouteEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.3 networkIPv6StaticRouteDestAddr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "The destination IP address of this route" ::= { networkIPv6StaticRouteEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.4 networkIPv6StaticRoutePrefix OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Description" ::= { networkIPv6StaticRouteEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.5 networkIPv6StaticRouteNextHop OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 address of the next hop of this route." ::= { networkIPv6StaticRouteEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.6 networkIPv6StaticRouteMetric1 OBJECT-TYPE SYNTAX INTEGER (-1..65534) MAX-ACCESS read-create STATUS current DESCRIPTION "The Primary routing metric for this route. The semantics of this metric are determined by the routing protocal specified in the route's ipRouteProto value." ::= { networkIPv6StaticRouteEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.7 networkIPv6StaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of the IPv6 static route table is used to control row action It has six defined action values - active(1) - notInService(2) - notReady(3) - createAndGo(4) - createAndWait(5) - destroy(6) " ::= { networkIPv6StaticRouteEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.6 networkIPVerTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkIPVerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP version of available interfaces" ::= { networkIpConfig 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1 networkIPVerEntry OBJECT-TYPE SYNTAX NetworkIPVerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { ifIndex, networkIPVerIndex } ::= { networkIPVerTable 1 } NetworkIPVerEntry ::= SEQUENCE { networkIPVerIndex Integer32, networkIPVersion InetAddressType } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1.1 networkIPVerIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIPVerEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1.2 networkIPVersion OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "IP version of this interface" ::= { networkIPVerEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.7 networkIPv6AutoConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkIPv6AutoConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIpConfig 7 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1 networkIPv6AutoConfigEntry OBJECT-TYPE SYNTAX NetworkIPv6AutoConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { ifIndex, networkIPv6AutoConfigIndex } ::= { networkIPv6AutoConfigTable 1 } NetworkIPv6AutoConfigEntry ::= SEQUENCE { networkIPv6AutoConfigIndex Integer32, networkIPv6AutoConfigMode EnableValue } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1.1 networkIPv6AutoConfigIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIPv6AutoConfigEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1.2 networkIPv6AutoConfigMode OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { networkIPv6AutoConfigEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.4 networkVlanConfig OBJECT IDENTIFIER ::= { symmCommonNetwork 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5 networkIPStatus OBJECT IDENTIFIER ::= { symmCommonNetwork 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1 networkIPv4StatusTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkIPv4StatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIPStatus 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1 networkIPv4StatusEntry OBJECT-TYPE SYNTAX NetworkIPv4StatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { ifIndex, networkIPv4StatusIndex } ::= { networkIPv4StatusTable 1 } NetworkIPv4StatusEntry ::= SEQUENCE { networkIPv4StatusIndex Integer32, networkIPv4Module TPMODULEID, networkIPv4VlanID Integer32, networkIPv4Addr InetAddressIPv4, networkIPv4Netmask InetAddressIPv4, networkIPv4RouteAddr InetAddressIPv4, networkIPv4Mode IpAddressOriginTC } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.1 networkIPv4StatusIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIPv4StatusEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.2 networkIPv4Module OBJECT-TYPE SYNTAX TPMODULEID MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv4StatusEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.3 networkIPv4VlanID OBJECT-TYPE SYNTAX Integer32 (2..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv4StatusEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.4 networkIPv4Addr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv4StatusEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.5 networkIPv4Netmask OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv4StatusEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.6 networkIPv4RouteAddr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv4StatusEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.7 networkIPv4Mode OBJECT-TYPE SYNTAX IpAddressOriginTC MAX-ACCESS read-only STATUS current DESCRIPTION "The origin of this IPv4 address can be one of the following: -manual(2) indicates that the address was manually configured to a specified address, e.g., by user configuration. -dhcp(4) indicates an address that was assigned to this system by a DHCP server. -linklayer(5) indicates an address created by IPv6 stateless auto-configuration. -random(6) indicates an address chosen by the system at random, e.g., an IPv4 address within 169.254/16, or an RFC 3041 privacy address. See existing object description " ::= { networkIPv4StatusEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2 networkIPv6StatusTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkIPv6StatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIPStatus 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1 networkIPv6StatusEntry OBJECT-TYPE SYNTAX NetworkIPv6StatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { ifIndex, networkIPv6StatusIndex } ::= { networkIPv6StatusTable 1 } NetworkIPv6StatusEntry ::= SEQUENCE { networkIPv6StatusIndex Integer32, networkIPv6Module TPMODULEID, networkIPv6VlanID Integer32, networkIPv6Addr InetAddressIPv6, networkIPv6PrefixLength InetAddressPrefixLength, networkIPv6AddrScope IPV6SCOPE, networkIPv6Mode IpAddressOriginTC } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.1 networkIPv6StatusIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { networkIPv6StatusEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.2 networkIPv6Module OBJECT-TYPE SYNTAX TPMODULEID MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv6StatusEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.3 networkIPv6VlanID OBJECT-TYPE SYNTAX Integer32 (2..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv6StatusEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.4 networkIPv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv6StatusEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.5 networkIPv6PrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv6StatusEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.7 networkIPv6AddrScope OBJECT-TYPE SYNTAX IPV6SCOPE MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv6StatusEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.8 networkIPv6Mode OBJECT-TYPE SYNTAX IpAddressOriginTC MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { networkIPv6StatusEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6 networkConformance OBJECT-IDENTITY STATUS current DESCRIPTION "This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. " ::= { symmCommonNetwork 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1 networkCompliances OBJECT IDENTIFIER ::= { networkConformance 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.1.1 -- this module -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.1.1 -- this module -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.1.1 networkBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which have common network of symmetricom." MODULE -- this module MANDATORY-GROUPS { networkEthAutoNetGroup, networkIPv4ConfigGroup, networkFirewallGroup, networkIPv4StaticRouteGroup, networkEthStatusGroup, networkIPv6ConfigGroup, networkIPv6StaticRouteGroup, networkIPVersionGroup, networkIPv6AutoConfigGroup, networkIPv4StatusGroup, networkIPv6StatusGroup } ::= { networkCompliances 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2 networkUocGroups OBJECT IDENTIFIER ::= { networkConformance 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.1 networkEthAutoNetGroup OBJECT-GROUP OBJECTS { networkEthAutoNegState, networkEthAutoNegSpeed } STATUS current DESCRIPTION "A collection of objects providing information applicable to ethernet auto-negotiation configuration group." ::= { networkUocGroups 1 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.2 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.2 networkIPv4ConfigGroup OBJECT-GROUP OBJECTS { networkIPv4AddressOrigin, networkIPv4Address, networkIPv4DefaultRouteAddr, networkIPv4SubnetMask, networkIPv4PortState } STATUS current DESCRIPTION "A collection of objects providing information applicable to IP configuration group." ::= { networkUocGroups 2 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.3 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.3 networkFirewallGroup OBJECT-GROUP OBJECTS { networkFirewallICMP, networkFirewallTelnet, networkFirewallSSH, networkFirewallSFTP, networkFirewallSNMP, networkFirewallFTP } STATUS current DESCRIPTION "A collection of objects providing information applicable to firewall group." ::= { networkUocGroups 3 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.4.2.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.4 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.4 networkIPv4StaticRouteGroup OBJECT-GROUP OBJECTS { networkIPv4StaticRouteIndex, networkIPv4StaticDestAddr, networkIPv4StaticRouteMask, networkIPv4StaticRouteNextHop, networkIPv4StaticRouteMetric1, networkIPv4StaticRouteRowStatus, networkIPv4StaticRouteIfindex } STATUS current DESCRIPTION "Description." ::= { networkUocGroups 4 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.5 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.5 networkEthStatusGroup OBJECT-GROUP OBJECTS { networkEthLinkSpeed, networkEthLinkStatus } STATUS current DESCRIPTION "Description." ::= { networkUocGroups 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.6 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.6 networkIPv6ConfigGroup OBJECT-GROUP OBJECTS { networkIPv6AddressOrigin, networkIPv6Address, networkIPv6Prefix, networkIPv6DefaultRouteAddr, networkIPv6PortState } STATUS current DESCRIPTION "Description." ::= { networkUocGroups 6 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.7 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.7 networkIPv6StaticRouteGroup OBJECT-GROUP OBJECTS { networkIPv6StaticRouteDestAddr, networkIPv6StaticRoutePrefix, networkIPv6StaticRouteNextHop, networkIPv6StaticRouteMetric1, networkIPv6StaticRouteIndex, networkIPv6StaticRouteRowStatus, networkIPv6StaticRouteIfindex } STATUS current DESCRIPTION "Description." ::= { networkUocGroups 7 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.8 -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.8 networkIPVersionGroup OBJECT-GROUP OBJECTS { networkIPVersion } STATUS current DESCRIPTION "Description." ::= { networkUocGroups 8 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.9 networkIPv6AutoConfigGroup OBJECT-GROUP OBJECTS { networkIPv6AutoConfigMode } STATUS current DESCRIPTION "Description." ::= { networkUocGroups 9 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.10 networkIPv4StatusGroup OBJECT-GROUP OBJECTS { networkIPv4Module, networkIPv4RouteAddr, networkIPv4Netmask, networkIPv4Addr } STATUS current DESCRIPTION "Description." ::= { networkUocGroups 10 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.11 networkIPv6StatusGroup OBJECT-GROUP OBJECTS { networkIPv6Module, networkIPv6Addr, networkIPv6AddrScope, networkIPv6Mode, networkIPv6PrefixLength } STATUS current DESCRIPTION "Description." ::= { networkUocGroups 11 } END -- -- SYMMCOMMONNETWORK.my --