SWITCH-AUTO-CONFIGURATION-MIB :: rcAutoConfigTftpServerAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SWITCH-AUTO-CONFIGURATION-MIB › rcAutoConfigTftpServerAddress

rcAutoConfigTftpServerAddress

Module: SWITCH-AUTO-CONFIGURATION-MIB

OID (symbolic): SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigTftpServerAddress

OID (numeric): 1.3.6.1.4.1.8886.6.1.28.1

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The object indicates the tftp server address requested of auto upgrade. The configuration of this object would not have effect on the tftp server address obtained from DHCP server.

What is rcAutoConfigTftpServerAddress?

This read-write object holds the IP address of the TFTP server the switch should use when performing an auto-configuration/upgrade. Admins set it to point the switch at a specific TFTP server for pulling firmware or configuration files, but a DHCP-supplied TFTP server address takes precedence over this manual setting. For example, setting rcAutoConfigTftpServerAddress to 192.168.1.10 tells the switch to fetch its auto-config files from that server when DHCP does not provide one.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.28.1
snmpwalk -v2c -c public <target> SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigTftpServerAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.28.1.1
snmpget -v2c -c public <target> SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigTftpServerAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.28.1.1 a <value>

Start monitoring Raisecom switch (zero-touch-provisioning/auto-config boot-version status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigTftpServerAddress OID value, configure state conditions and alerts, and monitor any Raisecom switch (zero-touch-provisioning/auto-config boot-version status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.28rcAutoConfigSWITCH-AUTO-CONFIGURATION-MIB
1.3.6.1.4.1.8886.6.1.28.1rcAutoConfigTftpServerAddressSWITCH-AUTO-CONFIGURATION-MIB