All MIBs › SWITCH-AUTO-CONFIGURATION-MIB › rcAutoConfigStartupEnable
rcAutoConfigStartupEnable
Module: SWITCH-AUTO-CONFIGURATION-MIB
OID (symbolic): SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigStartupEnable
OID (numeric): 1.3.6.1.4.1.8886.6.1.28.3
Node type: OBJECT-TYPE
Type: EnableVar
Access: read-only
Description: The object indicates whether the auto configuration will start while startup.
What is rcAutoConfigStartupEnable?
This read-only object reports whether auto-configuration is set to run automatically when the switch boots up. Admins check it to confirm whether a device is expected to attempt fetching its configuration from the network on every restart, which is useful when diagnosing why a switch did or did not pull new settings after a reboot. If rcAutoConfigStartupEnable reads "enable" but the switch still boots with stale config, the problem likely lies with the TFTP server or file path rather than the startup trigger itself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.28.3 snmpwalk -v2c -c public <target> SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigStartupEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.28.3.1 snmpget -v2c -c public <target> SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigStartupEnable.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rcAutoConfigStartupEnable.1
Start monitoring Raisecom switch (zero-touch-provisioning/auto-config boot-version status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigStartupEnable OID value, configure state conditions and alerts, and monitor any Raisecom switch (zero-touch-provisioning/auto-config boot-version status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.28 | rcAutoConfig | SWITCH-AUTO-CONFIGURATION-MIB |
| 1.3.6.1.4.1.8886.6.1.28.3 | rcAutoConfigStartupEnable | SWITCH-AUTO-CONFIGURATION-MIB |