All MIBs › SWITCH-AUTO-CONFIGURATION-MIB › rcAutoConfigCommand
rcAutoConfigCommand
Module: SWITCH-AUTO-CONFIGURATION-MIB
OID (symbolic): SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigCommand
OID (numeric): 1.3.6.1.4.1.8886.6.1.28.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The object indicates the request type of auto upgrade.
What is rcAutoConfigCommand?
This deprecated read-write object lets an admin start(1) or stop(2) an auto-upgrade operation on the switch. It was used to manually trigger or abort the fetch-and-apply cycle for configuration/firmware files, though it has since been superseded by other means in newer switch software. Setting rcAutoConfigCommand to "start" would kick off an immediate auto-upgrade attempt rather than waiting for the next scheduled or startup-triggered run.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.28.6 snmpwalk -v2c -c public <target> SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.28.6.1 snmpget -v2c -c public <target> SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.28.6.1 i <value>
Start monitoring Raisecom switch (zero-touch-provisioning/auto-config boot-version status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-AUTO-CONFIGURATION-MIB::rcAutoConfigCommand OID value, configure state conditions and alerts, and monitor any Raisecom switch (zero-touch-provisioning/auto-config boot-version status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.28 | rcAutoConfig | SWITCH-AUTO-CONFIGURATION-MIB |
| 1.3.6.1.4.1.8886.6.1.28.6 | rcAutoConfigCommand | SWITCH-AUTO-CONFIGURATION-MIB |