SNI-SERVERVIEW-MIB

All MIBs › SNI-SERVERVIEW-MIB

Category: Server and Host Management, Siemens Nixdorf Server Management

Description: Manages Siemens Nixdorf ServerView integrated server management including health, inventory, and alerting.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SNI-SERVERVIEW-MIB?

SNI-SERVERVIEW-MIB is the enterprise MIB behind ServerView, Siemens Nixdorf/Fujitsu Siemens Computers' (FSC) integrated server-management suite, providing SNMP access to the health, inventory, and alerting data ServerView collects from its managed servers. It exposes server identification (IP address, object name/ID), alarm/trap detail objects, and alarm-severity and alarm-service-command fields used to drive the ServerView alerting pipeline. It is a hardware/software health MIB by design: ServerView's purpose is aggregating a server's environmental and component health, such as temperature, power, and fans, into a unified alarm model, and this MIB's severity and trap-detail objects let an NMS distinguish an informational event from a critical hardware fault reported by the underlying server. It depends on ServerView's own internal hardware-health agents, which typically also expose vendor component MIBs for temperature/voltage/fan sensors, and re-surfaces their alerts through this unified trap/severity model. It was deployed on Fujitsu Siemens PRIMERGY (and predecessor SNI) rack/tower servers where ServerView was the standard systems-management agent, with SNI-SERVERVIEW-MIB SNMP monitoring integrating hardware alarms into enterprise NMS platforms via trap forwarding.

IPNetwork Monitor allows you to monitor SNMP objects defined in SNI-SERVERVIEW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu Siemens Computers PRIMERGY server (ServerView agent)

Monitoring Examples

An operator would correlate sieServerViewTrapSeverity with sniServerViewOrigTrapDetails to triage an incoming ServerView alarm, checking fscSvServerIPAddress and fscSvObjectName to identify which physical server and component raised it. A trap with critical severity tied to a hardware object would indicate something like a fan or power-supply failure needing immediate attention.

What Can Be Monitored

alarm/trap severity
originating trap detail
server IP address/identification
alarm service command status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
sni	1.3.6.1.4.1.231
sniProductMibs	1.3.6.1.4.1.231.2
sniExtensions	1.3.6.1.4.1.231.2.10
sniServerMgmt	1.3.6.1.4.1.231.2.10.2
NTF sniSvGenericTrapForward	1.3.6.1.4.1.231.2.10.2.0.700			Forwarded if ServerView application receives a trap to be forwarded - it is a generic trap
NTF sniSvPagerOff	1.3.6.1.4.1.231.2.10.2.0.701			Turn off the specified pager at the ServerView frontend application. This trap was moved from the SNI Trap-MIB to this MIB because of a trap ID conflict with SNI Mylex-MIB.
NTF sniSvServerStateChanged	1.3.6.1.4.1.231.2.10.2.0.702			Generated by ServerView application if Server changes state (manageable/not manageable)
NTF sniSvPassThroughTrapForward	1.3.6.1.4.1.231.2.10.2.0.703			Forwarded if ServerView application receives a trap to be forwarded - the original ServerName and Severity is retained
NTF sieSvAlarmServiceCommand	1.3.6.1.4.1.231.2.10.2.0.704			Command of the communication protocol between Alarm Service and Front End.
NTF fscSvServerAdded	1.3.6.1.4.1.231.2.10.2.0.705			Sent to all ServerView clients that had registered a notification port if one or more servers were added to the server list. The argument fscSvObjectName may be empty. In that case the SeverView database must be explored.
NTF fscSvServerRemoved	1.3.6.1.4.1.231.2.10.2.0.706			Sent to all ServerView clients that had registered a notification port if one or more servers were removed from the server list. The argument fscSvObjectName may be empty. In that case the SeverView database must be explored.
NTF fscSvServerChanged	1.3.6.1.4.1.231.2.10.2.0.707			Sent to all ServerView clients that had registered a notification port if one or more servers were changed in the server list. The argument fscSvObjectName may be empty. In that case the SeverView database must be explored.
NTF fscSvServerStatusChanged	1.3.6.1.4.1.231.2.10.2.0.708			Sent to all ServerView clients that had registered a notification port if one or more servers changed their status in the server list. The argument fscSvObjectName may be empty. In that case the SeverView database must be explored.
NTF fscSvGroupAdded	1.3.6.1.4.1.231.2.10.2.0.709			Sent to all ServerView clients that had registered a notification port if a group was added to the server list.
NTF fscSvGroupRemoved	1.3.6.1.4.1.231.2.10.2.0.710			Sent to all ServerView clients that had registered a notification port if a group was removed from the server list.
NTF fscSvGroupChanged	1.3.6.1.4.1.231.2.10.2.0.711			Sent to all ServerView clients that had registered a notification port if a group was changed in the server list.
NTF fscSvExploreServer	1.3.6.1.4.1.231.2.10.2.0.712			Sent to a registered notification port of the ServerList Service if one or more servers should be explored immediately. The argument fscSvObjectName may be empty. In that case the SeverView database must be inspected.
NTF fscAsTestMail	1.3.6.1.4.1.231.2.10.2.0.747			Generated by ServerView Alarm Service application if it sends a test mail
NTF fscAsTestPager	1.3.6.1.4.1.231.2.10.2.0.748			Generated by ServerView Alarm Service application if it tests a pager
NTF fscAsStopTrapListenService	1.3.6.1.4.1.231.2.10.2.0.749			Generated by ServerView Alarm Service application to stop the TrapListen Service
sniInventory	1.3.6.1.4.1.231.2.10.2.1
sniCommon	1.3.6.1.4.1.231.2.10.2.2
sniBios	1.3.6.1.4.1.231.2.10.2.2.1
sniEisa	1.3.6.1.4.1.231.2.10.2.2.2
sniHd	1.3.6.1.4.1.231.2.10.2.2.3
sniBus	1.3.6.1.4.1.231.2.10.2.2.4
sniServerControl	1.3.6.1.4.1.231.2.10.2.2.5
sniPcSpecific	1.3.6.1.4.1.231.2.10.2.3
sniScb	1.3.6.1.4.1.231.2.10.2.4
sniOsSpecific	1.3.6.1.4.1.231.2.10.2.5
sniNetware	1.3.6.1.4.1.231.2.10.2.5.1
sniWinNt	1.3.6.1.4.1.231.2.10.2.5.2
sniOs2	1.3.6.1.4.1.231.2.10.2.5.3
sniUnix	1.3.6.1.4.1.231.2.10.2.5.4
sniOemComponents	1.3.6.1.4.1.231.2.10.2.6
sniOemDpt	1.3.6.1.4.1.231.2.10.2.6.1
sniOemMylex	1.3.6.1.4.1.231.2.10.2.6.2
sniMlxDiskArray	1.3.6.1.4.1.231.2.10.2.6.2.1
sniSecurity	1.3.6.1.4.1.231.2.10.2.7
sniSmSecurity	1.3.6.1.4.1.231.2.10.2.7.1
sniServerView	1.3.6.1.4.1.231.2.10.2.8
sniServerViewTrapInfo	1.3.6.1.4.1.231.2.10.2.8.1
STR sniServerViewServerName	1.3.6.1.4.1.231.2.10.2.8.1.1	DisplayString	read-only	Name of server the trap occured
INT sniServerViewTrapTime	1.3.6.1.4.1.231.2.10.2.8.1.2	INTEGER	not-accessible	Time the trap occured (in seconds since 01/01/1970 00:00h)
STR sniServerViewOrigServerName	1.3.6.1.4.1.231.2.10.2.8.1.3	DisplayString	not-accessible	Name of the server this forwarded trap originally comes from
INT sniServerViewOrigTrapTime	1.3.6.1.4.1.231.2.10.2.8.1.4	INTEGER	not-accessible	Time this forwarded trap originally was sent
STR sniServerViewOrigTrapName	1.3.6.1.4.1.231.2.10.2.8.1.5	DisplayString	not-accessible	Name this forwarded trap originally had
INT sniServerViewNumber	1.3.6.1.4.1.231.2.10.2.8.1.6	INTEGER	not-accessible	Generic parameter for any numeric number
STR sniServerViewState	1.3.6.1.4.1.231.2.10.2.8.1.7	DisplayString	not-accessible	New state of server
STR sniServerViewOrigTrapDetails	1.3.6.1.4.1.231.2.10.2.8.1.8	DisplayString	not-accessible	Original alarm details
INT sieServerViewAlarmServiceCommand	1.3.6.1.4.1.231.2.10.2.8.1.9	INTEGER	not-accessible	Command code for the communication protocol between Alarm Service and Front End.
INT sieServerViewTrapSeverity	1.3.6.1.4.1.231.2.10.2.8.1.10	INTEGER	not-accessible	Alarm severity
STR fscSvObjectName	1.3.6.1.4.1.231.2.10.2.8.1.11	DisplayString	not-accessible	Name of an object (server/group)
INT fscSvObjectId	1.3.6.1.4.1.231.2.10.2.8.1.12	INTEGER	not-accessible	Any object ID or number
STR fscSvServerIPAddress	1.3.6.1.4.1.231.2.10.2.8.1.13	DisplayString	read-only	IPAddress of server
sniTrapMib	1.3.6.1.4.1.231.2.10.5

RFC description

Server management MIB for Fujitsu Siemens ServerView providing system, hardware, and OS-specific monitoring.

Start monitoring Fujitsu Siemens Computers PRIMERGY server, ServerView agent (alarm severity/trap status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SNI-SERVERVIEW-MIB

What Is SNI-SERVERVIEW-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description