SNI-BUS-MIB

All MIBs › SNI-BUS-MIB

Category: Server and Host Management, Siemens Nixdorf Server Management

Description: Manages Siemens Nixdorf server system bus configuration, slot inventory, and adapter card status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SNI-BUS-MIB?

SNI-BUS-MIB is a Siemens Nixdorf enterprise MIB for managing the internal system bus of Siemens Nixdorf server hardware, covering EISA, ISA, and PCI bus slots and the adapter cards installed in them. It exposes hardware inventory data such as slot counts per bus type, device slot numbers, function numbers, and device type/name for each installed card. Its principal use is hardware status monitoring: it lets an administrator enumerate which physical adapter cards (network, storage, or other function cards) are present in which slots, so a missing or changed sniDeviceType at a known slot number reveals a card failure, removal, or unexpected hardware change. This MIB is standalone hardware-inventory data with no apparent dependency on other MIBs beyond standard SNMP conventions. It would be deployed on legacy Siemens Nixdorf server systems for asset tracking and hardware-fault triage. Engineers can download the SNI-BUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SNI-BUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens Nixdorf server system

Monitoring Examples

An administrator would poll sniFunctionTable / sniFunctionEntry, keyed by sniBusIndex and sniDeviceSlotNo, to read sniDeviceType and sniDeviceTypeName for each populated slot, confirming that the expected adapter cards are still physically present. Comparing sniEisaSlots, sniIsaSlots, and sniPciSlots counts against the known chassis configuration would reveal if a bus segment reports fewer available slots than expected. A sniFunctionNo entry disappearing between polls at a previously populated sniDeviceSlotNo would indicate a card was removed or has failed to enumerate on the bus.

What Can Be Monitored

EISA/ISA/PCI slot counts
adapter card device type per slot
adapter card presence per slot
bus function number
bus type per slot

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
sni	1.3.6.1.4.1.231
sniProductMibs	1.3.6.1.4.1.231.2
sniExtensions	1.3.6.1.4.1.231.2.10
sniServerMgmt	1.3.6.1.4.1.231.2.10.2
sniInventory	1.3.6.1.4.1.231.2.10.2.1
sniCommon	1.3.6.1.4.1.231.2.10.2.2
sniBios	1.3.6.1.4.1.231.2.10.2.2.1
sniEisa	1.3.6.1.4.1.231.2.10.2.2.2
sniHd	1.3.6.1.4.1.231.2.10.2.2.3
sniBus	1.3.6.1.4.1.231.2.10.2.2.4
sniBusCommon	1.3.6.1.4.1.231.2.10.2.2.4.1
INT sniEisaSlots	1.3.6.1.4.1.231.2.10.2.2.4.1.1	INTEGER	read-only	Number of eisa slots in the system. 0 if no EISA-Bus present.
INT sniIsaSlots	1.3.6.1.4.1.231.2.10.2.2.4.1.2	INTEGER	read-only	Number of isa slots in the system. 0 if no ISA-Bus present.
INT sniPciSlots	1.3.6.1.4.1.231.2.10.2.2.4.1.3	INTEGER	read-only	Number of pci slots in the system. 0 if no PCI-Bus present.
sniFunctionTable	1.3.6.1.4.1.231.2.10.2.2.4.1.4		not-accessible	Table of all common data for all functions
sniFunctionEntry	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1		not-accessible
INT sniBusType	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.1	INTEGER	read-only	Type of the bus
INT sniBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.2	INTEGER	read-only	Index of the bus based on 1
INT sniDeviceSlotNo	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.3	INTEGER	read-only	Device- or Slot-number based on 0
INT sniFunctionNo	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.4	INTEGER	read-only	Functionnumber based on 1
INT sniDeviceType	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.5	INTEGER	read-only	indicates the type of device
STR sniDeviceTypeName	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.6	DisplayString	read-only	type of device in readable form
STR sniDeviceName	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.7	DisplayString	read-only	Operating system independent name of device in readable form
STR sniVendorName	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.8	DisplayString	read-only	manufacturer of the device in readable form
INT sniPhysicalSlotNo	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.9	INTEGER	read-only	indicates the physical slot the device resides in (0: onboard device, -1: not available)
OCT sniAdapterSpecificData	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.10	OCTET STRING	read-only	Specific data for this adapter. Currently the only information defined is the MAC address for lan adapters.
STR sniOsDeviceName	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.11	DisplayString	read-only	Operating system specific display name for the device
STR sniPhysicalSlotDesignation	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.12	DisplayString	read-only	Designation of the physical slot where the device is plugged in
STR sniCompLocationKey	1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.13	DisplayString	read-only	Device location key, used for identifying the component; e.g. 'TYPE_PCI&BUS_3&DEV_14&FUNC_0'
sniBusEisa	1.3.6.1.4.1.231.2.10.2.2.4.2
sniEisaFunctionTable	1.3.6.1.4.1.231.2.10.2.2.4.2.1		not-accessible	Table of all eisa function entries
sniEisaFunctionEntry	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1		not-accessible
INT sniEisaBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.1	INTEGER	read-only	Index of the bus based on 1
INT sniEisaSlotNo	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.2	INTEGER	read-only	Slot number based on 0
INT sniEisaFunctionNo	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.3	INTEGER	read-only	Eisa function number based on 1
INT sniEisaSlotType	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.4	INTEGER	read-only	Type of the slot
INT sniEisaConfigurationComplete	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.5	INTEGER	read-only	True if board is completely configured
STR sniEisaType	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.6	DisplayString	read-only	Type and subtype as ASCII string
INT sniEisaValid	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.7	INTEGER	read-only	True, if the slot contains a correctly configured eisa board.
STR sniEisaId	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.8	DisplayString	read-only	The eisa id of the board.
STR sniEisaName	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.9	DisplayString	read-only	Visual name of the board.
INT sniEisaAgentType	1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.10	INTEGER	read-only
sniBusPci	1.3.6.1.4.1.231.2.10.2.2.4.3
sniPciFunctionTable	1.3.6.1.4.1.231.2.10.2.2.4.3.1		not-accessible	Table of all pci function entries
sniPciFunctionEntry	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1		not-accessible
INT sniPciBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.1	INTEGER	read-only	Index of the bus based on 1
INT sniPciDeviceNo	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.2	INTEGER	read-only	Device number based on 0
INT sniPciFunctionNo	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.3	INTEGER	read-only	Function number based on 1
INT sniPciVendorId	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.4	INTEGER	read-only	Identifies the manufacturer of the device. This must be a value allocated by the PCI SIG.
INT sniPciDeviceId	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.5	INTEGER	read-only	Identifies the particular device. This value is assigned by the manufacturer.
INT sniPciRevisionId	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.6	INTEGER	read-only	Specifies the revision level of the device described by sniPciDeviceId. This value is assigned by the manufacturer.
INT sniPciBaseClass	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.7	INTEGER	read-only	Identifies type of the device, according to the PCI classification scheme.
INT sniPciSubClass	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.8	INTEGER	read-only	Identifies the subtype, if any, of the device, according to the PCI classification scheme.
INT sniPciProgIf	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.9	INTEGER	read-only	Identifies the register-level programming interface, if any, for the device, according to the PCI classification scheme.
INT sniPciBuiltInSelfTest	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.10	INTEGER	read-only	Indicates if the device does support built-in self test.
INT sniPciInterruptPin	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.11	INTEGER	read-only	Indicates which interrupt pin the PCI device uses.
INT sniPciInterruptLine	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.12	INTEGER	read-only	Indicates the input of the system interrupt controller that the interrupt pin is connected to.
OCT sniPciSpecificData	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.13	OCTET STRING	read-only	This is device specific data found in the COMMON CONFIGURATION SPACE. This field is currently not used and therefor filled with zeros.
INT sniPciSecondaryBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.14	INTEGER	read-only	Valid only for a bridge device. This is the index of the bridge's secondary bus (-1 = no bus index available; ignore this field).
INT sniPciSecondaryBusType	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.15	INTEGER	read-only	Valid only for a bridge device. This is the type of the bridge's secondary bus. Following values are defined (according to PCI Local bus specification, Revision 2.1, values are incremented by 1): 00h: Unknown value; ignore this field 01h: Host bridge (bridge to CPU bus) 02h: ISA bridge 03h: EISA bridge 04h: MCA bridge 05h: PCI-to-PCI bridge 06h: PCMCIA bridge 07h: NuBus bridge 80h: Other bridge device
INT sniPciSubVendorId	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.16	INTEGER	read-only	Identifies the particular device. This value is assigned by the manufacturer.
INT sniPciSubDeviceId	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.17	INTEGER	read-only	Identifies the particular device. This value is assigned by the manufacturer.
STR sniPciVendorName	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.18	DisplayString	read-only	PCI device vendor name
STR sniPciSubVendorName	1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.19	DisplayString	read-only	PCI device sub vendor name
sniBusResource	1.3.6.1.4.1.231.2.10.2.2.4.4
sniMemoryTable	1.3.6.1.4.1.231.2.10.2.2.4.4.1		not-accessible	Table of all memory entries
sniMemoryEntry	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1		not-accessible
INT sniMemBusType	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.1	INTEGER	read-only	Type of the bus
INT sniMemBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.2	INTEGER	read-only	Index of the bus based on 1
INT sniMemSlotDevice	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.3	INTEGER	read-only	Slot or Device number based on 0
INT sniMemFunctionNo	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.4	INTEGER	read-only	Function number based on 1
INT sniMemoryNo	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.5	INTEGER	read-only	Memory number based on 1
INT sniBusSharedMemory	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.6	INTEGER	read-only	Type of shared memory
INT sniBusMemoryStart	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.7	INTEGER	read-only	Start address (low DWORD part) of shared memory or 0 if not used
INT sniBusMemoryLength	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.8	INTEGER	read-only	Length of shared memory or 0 if not used
INT sniBusMemoryStartHigh	1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.9	INTEGER	read-only	Start address (high DWORD part) of shared memory or 0 if not used
sniInterruptTable	1.3.6.1.4.1.231.2.10.2.2.4.4.2		not-accessible	Table of all interrupt entries
sniInterruptEntry	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1		not-accessible
INT sniIntBusType	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.1	INTEGER	read-only	Type of the bus
INT sniIntBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.2	INTEGER	read-only	Index of the bus based on 1
INT sniIntSlotDevice	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.3	INTEGER	read-only	Slot or Device number based on 0
INT sniIntFunctionNo	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.4	INTEGER	read-only	Function number based on 1
INT sniInterruptNo	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.5	INTEGER	read-only	Interrupt number based on 1
INT sniBusInterruptUsed	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.6	INTEGER	read-only	True if and only if not unknown and an interrupt is used
INT sniBusInterruptLevel	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.7	INTEGER	read-only	interrupt level
INT sniBusInterruptShared	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.8	INTEGER	read-only	True if and only if not unknown and an interrupt is shared
INT sniBusInterruptNo	1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.9	INTEGER	read-only	interrupt number used
sniDMATable	1.3.6.1.4.1.231.2.10.2.2.4.4.3		not-accessible	Table of all dma entries
sniDMAEntry	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1		not-accessible
INT sniDMABusType	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.1	INTEGER	read-only	Type of the bus
INT sniDMABusIndex	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.2	INTEGER	read-only	Index of the bus based on 1
INT sniDMASlotDevice	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.3	INTEGER	read-only	Slot or Device number based on 0
INT sniDMAFunctionNo	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.4	INTEGER	read-only	Function number based on 1
INT sniDMANo	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.5	INTEGER	read-only	DMA number based on 1
INT sniBusDMAChannel	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.6	INTEGER	read-only	DMA channel
INT sniBusDMATiming	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.7	INTEGER	read-only	DMA timing
INT sniBusDMATransferSize	1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.8	INTEGER	read-only	DMA transfer size
sniPortTable	1.3.6.1.4.1.231.2.10.2.2.4.4.4		not-accessible	Table of all port entries
sniPortEntry	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1		not-accessible
INT sniPortBusType	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.1	INTEGER	read-only	Type of the bus
INT sniPortBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.2	INTEGER	read-only	Index of the bus based on 1
INT sniPortSlotDevice	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.3	INTEGER	read-only	Slot or Device number based on 0
INT sniPortFunctionNo	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.4	INTEGER	read-only	Function number based on 1
INT sniPortNo	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.5	INTEGER	read-only	Port number based on 1
INT sniBusIOFirstPort	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.6	INTEGER	read-only	First io port used
INT sniBusIONoOfPorts	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.7	INTEGER	read-only	Number of io ports used
INT sniBusIOPortShared	1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.8	INTEGER	read-only	True if io port is shared
sniBusSummary	1.3.6.1.4.1.231.2.10.2.2.4.5
sniBusComponentTable	1.3.6.1.4.1.231.2.10.2.2.4.5.1		not-accessible	Table of all common data for all functions
sniBusComponents	1.3.6.1.4.1.231.2.10.2.2.4.5.1.1		not-accessible
INT sniBusCompBusType	1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.1	INTEGER	read-only	Type of the bus (ISA, EISA, PCI)
INT sniBusCompBusNumber	1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.2	INTEGER	read-only	Bus number for the specified bus type (1..n)
INT sniBusCompDeviceNo	1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.3	INTEGER	read-only	Device number (PCI) or slot number (ISA, EISA)
INT sniBusCompSlotNo	1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.4	INTEGER	read-only	Physical slot number (0..n), -1 if unknown
STR sniBusCompDeviceName	1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.5	DisplayString	read-only	Vendor and device name in readable form
STR sniBusCompDeviceType	1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.6	DisplayString	read-only	Device type in readable form
STR sniBusCompEisaPciId	1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.7	DisplayString	read-only	EISA ID for EISA components, PCI vendor/device ID for PCI components (hexadecimal notation)
svBusPciEx	1.3.6.1.4.1.231.2.10.2.2.4.6
svPciFunctionTable	1.3.6.1.4.1.231.2.10.2.2.4.6.1		not-accessible	Table of all pci function entries
svPciFunctionEntry	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1		not-accessible
INT svPciSegmentNo	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.1	INTEGER	read-only	PCI segment number (zero based)
INT svPciBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.2	INTEGER	read-only	Index of the bus based on 1
INT svPciDeviceNo	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.3	INTEGER	read-only	Device number based on 0
INT svPciFunctionNo	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.4	INTEGER	read-only	Function number based on 1
INT svPciVendorId	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.5	INTEGER	read-only	Identifies the manufacturer of the device. This must be a value allocated by the PCI SIG.
INT svPciSubVendorId	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.6	INTEGER	read-only	Identifies the particular device. This value is assigned by the manufacturer.
INT svPciDeviceId	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.7	INTEGER	read-only	Identifies the particular device. This value is assigned by the manufacturer.
INT svPciSubDeviceId	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.8	INTEGER	read-only	Identifies the particular device. This value is assigned by the manufacturer.
INT svPciRevisionId	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.9	INTEGER	read-only	Specifies the revision level of the device described by svPciDeviceId. This value is assigned by the manufacturer.
INT svPciBaseClass	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.10	INTEGER	read-only	Identifies type of the device, according to the PCI classification scheme.
INT svPciSubClass	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.11	INTEGER	read-only	Identifies the subtype, if any, of the device, according to the PCI classification scheme.
INT svPciProgIf	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.12	INTEGER	read-only	Identifies the register-level programming interface, if any, for the device, according to the PCI classification scheme.
INT svPciBuiltInSelfTest	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.13	INTEGER	read-only	Indicates if the device does support built-in self test.
INT svPciInterruptPin	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.14	INTEGER	read-only	Indicates which interrupt pin the PCI device uses.
INT svPciInterruptLine	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.15	INTEGER	read-only	Indicates the input of the system interrupt controller that the interrupt pin is connected to.
OCT svPciSpecificData	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.16	OCTET STRING	read-only	This is device specific data found in the COMMON CONFIGURATION SPACE. This field is currently not used and therefor filled with zeros.
INT svPciSecondaryBusIndex	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.17	INTEGER	read-only	Valid only for a bridge device. This is the index of the bridge's secondary bus (-1 = no bus index available; ignore this field).
INT svPciSecondaryBusType	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.18	INTEGER	read-only	Valid only for a bridge device. This is the type of the bridge's secondary bus. Following values are defined (according to PCI Local bus specification, Revision 2.1, values are incremented by 1): 00h: Unknown value; ignore this field 01h: Host bridge (bridge to CPU bus) 02h: ISA bridge 03h: EISA bridge 04h: MCA bridge 05h: PCI-to-PCI bridge 06h: PCMCIA bridge 07h: NuBus bridge 80h: Other bridge device
STR svPciVendorName	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.19	DisplayString	read-only	PCI device vendor name
STR svPciSubVendorName	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.20	DisplayString	read-only	PCI device sub vendor name
STR svPciDeviceName	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.21	DisplayString	read-only	Operating system independent name of device in readable form
OCT svPciAdapterUniqueId	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.22	OCTET STRING	read-only	Unigue adapter type specific ID. MAC address for lan adapters. WWN for fibre channel adapters. Otherwise empty.
OCT svPciAdapterSpecificData	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.23	OCTET STRING	read-only	Specific data for this adapter.
STR svPciPhysicalSlotDesignation	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.24	DisplayString	read-only	Designation of the physical slot where the device is plugged in
STR svPciCompLocationKey	1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.25	DisplayString	read-only	Unique device location key, used for identifying the component; e.g. 'TYPE_PCI&BUS_3&DEV_14&FUNC_0' or 'TYPE_PCI&BUS_3&DEV_14&FUNC_0&SEG_1'
sniServerControl	1.3.6.1.4.1.231.2.10.2.2.5
sniPcSpecific	1.3.6.1.4.1.231.2.10.2.3
sniScb	1.3.6.1.4.1.231.2.10.2.4
sniOsSpecific	1.3.6.1.4.1.231.2.10.2.5
sniNetware	1.3.6.1.4.1.231.2.10.2.5.1
sniWinNt	1.3.6.1.4.1.231.2.10.2.5.2
sniOs2	1.3.6.1.4.1.231.2.10.2.5.3
sniUnix	1.3.6.1.4.1.231.2.10.2.5.4
sniOemComponents	1.3.6.1.4.1.231.2.10.2.6
sniOemDpt	1.3.6.1.4.1.231.2.10.2.6.1
sniOemMylex	1.3.6.1.4.1.231.2.10.2.6.2
sniMlxDiskArray	1.3.6.1.4.1.231.2.10.2.6.2.1
sniSecurity	1.3.6.1.4.1.231.2.10.2.7
sniSmSecurity	1.3.6.1.4.1.231.2.10.2.7.1
sniServerView	1.3.6.1.4.1.231.2.10.2.8
sniTrapMib	1.3.6.1.4.1.231.2.10.5

RFC description

Monitors system bus architecture including common, EISA, PCI resources and summary information on servers.

Start monitoring Siemens Nixdorf server system (EISA/ISA/PCI bus slot/adapter-card inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SNI-BUS-MIB

What Is SNI-BUS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description