All MIBs › SL61-STD-MIB
Category: Asentria Remote Site Monitoring, Building and Environmental Control
Description: Manages SL61-series remote site monitoring device for environmental sensing, I/O control, and alarm notification.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SL61-STD-MIB?
SL61-STD-MIB is a vendor-specific MIB from Omnitronix for the SNMP-Link SL61, a remote-site environmental and event-monitoring device, organized around an event-sensor status branch (esPointTable, holding per-point index, name, current event state, integer/string value, and last-change timestamps) and a data-event status branch (deStatusTable, deFieldTable, deConfigTable) for user-defined data-driven alarm points. It also models device configuration for serial ports (portConfigTable), modem dialing, SNMP trap destinations, and alphanumeric/text pagers (pagerTable, smTable) used for out-of-band alerting when a monitored condition trips, alongside product-identification and diagnostic tables (techSupport20Table, techSupport21Table) for field support. This MIB is useful for tracking arbitrary field-deployed sensors — temperature, door contacts, generator status, or other discrete/analog I/O — wired into the SL61, and for confirming that alarm notification paths (SNMP trap, pager) actually fire when a sensor trips; it is deployed at unattended remote sites (cell sites, huts, cabinets) where the SL61 acts as the local monitoring RTU, and network operations teams can pull SL61-STD-MIB SNMP monitoring data to integrate remote-site alarms into a central NMS.
IPNetwork Monitor allows you to monitor SNMP objects defined in SL61-STD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Omnitronix SL61 remote-site environmental monitoring unit
Monitoring Examples
An operator polls esPointTable (indexed by esIndexES/esIndexPC/esIndexPoint) to check esPointInEventState and esPointValueInt for a door-contact or temperature sensor; a point showing an active event state alongside an out-of-range esPointValueInt would indicate the monitored condition at the remote site has tripped and should generate a trap or page.
What Can Be Monitored
- event-sensor point state and value (int/string)
- data-event configuration and status
- serial port and modem configuration
- pager/SNMP trap destination configuration
- point last-change timestamp
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| IpAddress | |
| ObjectName | |
| TimeTicks | |
| enterprises |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| omnitronix | 1.3.6.1.4.1.3052 | |||
| sl61 | 1.3.6.1.4.1.3052.4 | |||
| NTF sl61TestTrap | 1.3.6.1.4.1.3052.4.0.1 | An test trap is issued by the user. | ||
| NTF sl61StockESDisconnectTrap | 1.3.6.1.4.1.3052.4.0.50 | A stock EventSensor disconnect trap is issued when an EventSensor has been unreponsive for the configured timeout. | ||
| NTF sl61StockDataEventTrap | 1.3.6.1.4.1.3052.4.0.100 | A stock data event trap is issued when a data event happens. | ||
| NTF sl61StockContactClosureTrap | 1.3.6.1.4.1.3052.4.0.110 | A stock contact closure trap is issued when a contact closure event happens. | ||
| NTF sl61StockTempTrap | 1.3.6.1.4.1.3052.4.0.120 | A stock temperature trap is issued when a temperature event happens. | ||
| NTF sl61StockHumidityTrap | 1.3.6.1.4.1.3052.4.0.130 | A stock humidity trap is issued when a humidity event happens. | ||
| NTF sl61StockAnalogTrap | 1.3.6.1.4.1.3052.4.0.140 | A stock analog trap is issued when an analog sensor event happens. | ||
| NTF sl61UserTrap1000 | 1.3.6.1.4.1.3052.4.0.1000 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1000. | ||
| NTF sl61UserTrap1001 | 1.3.6.1.4.1.3052.4.0.1001 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1001. | ||
| NTF sl61UserTrap1002 | 1.3.6.1.4.1.3052.4.0.1002 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1002. | ||
| NTF sl61UserTrap1003 | 1.3.6.1.4.1.3052.4.0.1003 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1003. | ||
| NTF sl61UserTrap1004 | 1.3.6.1.4.1.3052.4.0.1004 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1004. | ||
| NTF sl61UserTrap1005 | 1.3.6.1.4.1.3052.4.0.1005 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1005. | ||
| NTF sl61UserTrap1006 | 1.3.6.1.4.1.3052.4.0.1006 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1006. | ||
| NTF sl61UserTrap1007 | 1.3.6.1.4.1.3052.4.0.1007 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1007. | ||
| NTF sl61UserTrap1008 | 1.3.6.1.4.1.3052.4.0.1008 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1008. | ||
| NTF sl61UserTrap1009 | 1.3.6.1.4.1.3052.4.0.1009 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1009. | ||
| NTF sl61UserTrap1010 | 1.3.6.1.4.1.3052.4.0.1010 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1010. | ||
| NTF sl61UserTrap1011 | 1.3.6.1.4.1.3052.4.0.1011 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1011. | ||
| NTF sl61UserTrap1012 | 1.3.6.1.4.1.3052.4.0.1012 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1012. | ||
| NTF sl61UserTrap1013 | 1.3.6.1.4.1.3052.4.0.1013 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1013. | ||
| NTF sl61UserTrap1014 | 1.3.6.1.4.1.3052.4.0.1014 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1014. | ||
| NTF sl61UserTrap1015 | 1.3.6.1.4.1.3052.4.0.1015 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1015. | ||
| NTF sl61UserTrap1016 | 1.3.6.1.4.1.3052.4.0.1016 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1016. | ||
| NTF sl61UserTrap1017 | 1.3.6.1.4.1.3052.4.0.1017 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1017. | ||
| NTF sl61UserTrap1018 | 1.3.6.1.4.1.3052.4.0.1018 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1018. | ||
| NTF sl61UserTrap1019 | 1.3.6.1.4.1.3052.4.0.1019 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1019. | ||
| NTF sl61UserTrap1020 | 1.3.6.1.4.1.3052.4.0.1020 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1020. | ||
| NTF sl61UserTrap1021 | 1.3.6.1.4.1.3052.4.0.1021 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1021. | ||
| NTF sl61UserTrap1022 | 1.3.6.1.4.1.3052.4.0.1022 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1022. | ||
| NTF sl61UserTrap1023 | 1.3.6.1.4.1.3052.4.0.1023 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1023. | ||
| NTF sl61UserTrap1024 | 1.3.6.1.4.1.3052.4.0.1024 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1024. | ||
| NTF sl61UserTrap1025 | 1.3.6.1.4.1.3052.4.0.1025 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1025. | ||
| NTF sl61UserTrap1026 | 1.3.6.1.4.1.3052.4.0.1026 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1026. | ||
| NTF sl61UserTrap1027 | 1.3.6.1.4.1.3052.4.0.1027 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1027. | ||
| NTF sl61UserTrap1028 | 1.3.6.1.4.1.3052.4.0.1028 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1028. | ||
| NTF sl61UserTrap1029 | 1.3.6.1.4.1.3052.4.0.1029 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1029. | ||
| NTF sl61UserTrap1030 | 1.3.6.1.4.1.3052.4.0.1030 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1030. | ||
| NTF sl61UserTrap1031 | 1.3.6.1.4.1.3052.4.0.1031 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1031. | ||
| NTF sl61UserTrap1032 | 1.3.6.1.4.1.3052.4.0.1032 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1032. | ||
| NTF sl61UserTrap1033 | 1.3.6.1.4.1.3052.4.0.1033 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1033. | ||
| NTF sl61UserTrap1034 | 1.3.6.1.4.1.3052.4.0.1034 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1034. | ||
| NTF sl61UserTrap1035 | 1.3.6.1.4.1.3052.4.0.1035 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1035. | ||
| NTF sl61UserTrap1036 | 1.3.6.1.4.1.3052.4.0.1036 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1036. | ||
| NTF sl61UserTrap1037 | 1.3.6.1.4.1.3052.4.0.1037 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1037. | ||
| NTF sl61UserTrap1038 | 1.3.6.1.4.1.3052.4.0.1038 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1038. | ||
| NTF sl61UserTrap1039 | 1.3.6.1.4.1.3052.4.0.1039 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1039. | ||
| NTF sl61UserTrap1040 | 1.3.6.1.4.1.3052.4.0.1040 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1040. | ||
| NTF sl61UserTrap1041 | 1.3.6.1.4.1.3052.4.0.1041 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1041. | ||
| NTF sl61UserTrap1042 | 1.3.6.1.4.1.3052.4.0.1042 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1042. | ||
| NTF sl61UserTrap1043 | 1.3.6.1.4.1.3052.4.0.1043 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1043. | ||
| NTF sl61UserTrap1044 | 1.3.6.1.4.1.3052.4.0.1044 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1044. | ||
| NTF sl61UserTrap1045 | 1.3.6.1.4.1.3052.4.0.1045 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1045. | ||
| NTF sl61UserTrap1046 | 1.3.6.1.4.1.3052.4.0.1046 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1046. | ||
| NTF sl61UserTrap1047 | 1.3.6.1.4.1.3052.4.0.1047 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1047. | ||
| NTF sl61UserTrap1048 | 1.3.6.1.4.1.3052.4.0.1048 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1048. | ||
| NTF sl61UserTrap1049 | 1.3.6.1.4.1.3052.4.0.1049 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1049. | ||
| NTF sl61UserTrap1050 | 1.3.6.1.4.1.3052.4.0.1050 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1050. | ||
| NTF sl61UserTrap1051 | 1.3.6.1.4.1.3052.4.0.1051 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1051. | ||
| NTF sl61UserTrap1052 | 1.3.6.1.4.1.3052.4.0.1052 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1052. | ||
| NTF sl61UserTrap1053 | 1.3.6.1.4.1.3052.4.0.1053 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1053. | ||
| NTF sl61UserTrap1054 | 1.3.6.1.4.1.3052.4.0.1054 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1054. | ||
| NTF sl61UserTrap1055 | 1.3.6.1.4.1.3052.4.0.1055 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1055. | ||
| NTF sl61UserTrap1056 | 1.3.6.1.4.1.3052.4.0.1056 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1056. | ||
| NTF sl61UserTrap1057 | 1.3.6.1.4.1.3052.4.0.1057 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1057. | ||
| NTF sl61UserTrap1058 | 1.3.6.1.4.1.3052.4.0.1058 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1058. | ||
| NTF sl61UserTrap1059 | 1.3.6.1.4.1.3052.4.0.1059 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1059. | ||
| NTF sl61UserTrap1060 | 1.3.6.1.4.1.3052.4.0.1060 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1060. | ||
| NTF sl61UserTrap1061 | 1.3.6.1.4.1.3052.4.0.1061 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1061. | ||
| NTF sl61UserTrap1062 | 1.3.6.1.4.1.3052.4.0.1062 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1062. | ||
| NTF sl61UserTrap1063 | 1.3.6.1.4.1.3052.4.0.1063 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1063. | ||
| NTF sl61UserTrap1064 | 1.3.6.1.4.1.3052.4.0.1064 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1064. | ||
| NTF sl61UserTrap1065 | 1.3.6.1.4.1.3052.4.0.1065 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1065. | ||
| NTF sl61UserTrap1066 | 1.3.6.1.4.1.3052.4.0.1066 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1066. | ||
| NTF sl61UserTrap1067 | 1.3.6.1.4.1.3052.4.0.1067 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1067. | ||
| NTF sl61UserTrap1068 | 1.3.6.1.4.1.3052.4.0.1068 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1068. | ||
| NTF sl61UserTrap1069 | 1.3.6.1.4.1.3052.4.0.1069 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1069. | ||
| NTF sl61UserTrap1070 | 1.3.6.1.4.1.3052.4.0.1070 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1070. | ||
| NTF sl61UserTrap1071 | 1.3.6.1.4.1.3052.4.0.1071 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1071. | ||
| NTF sl61UserTrap1072 | 1.3.6.1.4.1.3052.4.0.1072 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1072. | ||
| NTF sl61UserTrap1073 | 1.3.6.1.4.1.3052.4.0.1073 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1073. | ||
| NTF sl61UserTrap1074 | 1.3.6.1.4.1.3052.4.0.1074 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1074. | ||
| NTF sl61UserTrap1075 | 1.3.6.1.4.1.3052.4.0.1075 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1075. | ||
| NTF sl61UserTrap1076 | 1.3.6.1.4.1.3052.4.0.1076 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1076. | ||
| NTF sl61UserTrap1077 | 1.3.6.1.4.1.3052.4.0.1077 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1077. | ||
| NTF sl61UserTrap1078 | 1.3.6.1.4.1.3052.4.0.1078 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1078. | ||
| NTF sl61UserTrap1079 | 1.3.6.1.4.1.3052.4.0.1079 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1079. | ||
| NTF sl61UserTrap1080 | 1.3.6.1.4.1.3052.4.0.1080 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1080. | ||
| NTF sl61UserTrap1081 | 1.3.6.1.4.1.3052.4.0.1081 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1081. | ||
| NTF sl61UserTrap1082 | 1.3.6.1.4.1.3052.4.0.1082 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1082. | ||
| NTF sl61UserTrap1083 | 1.3.6.1.4.1.3052.4.0.1083 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1083. | ||
| NTF sl61UserTrap1084 | 1.3.6.1.4.1.3052.4.0.1084 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1084. | ||
| NTF sl61UserTrap1085 | 1.3.6.1.4.1.3052.4.0.1085 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1085. | ||
| NTF sl61UserTrap1086 | 1.3.6.1.4.1.3052.4.0.1086 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1086. | ||
| NTF sl61UserTrap1087 | 1.3.6.1.4.1.3052.4.0.1087 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1087. | ||
| NTF sl61UserTrap1088 | 1.3.6.1.4.1.3052.4.0.1088 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1088. | ||
| NTF sl61UserTrap1089 | 1.3.6.1.4.1.3052.4.0.1089 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1089. | ||
| NTF sl61UserTrap1090 | 1.3.6.1.4.1.3052.4.0.1090 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1090. | ||
| NTF sl61UserTrap1091 | 1.3.6.1.4.1.3052.4.0.1091 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1091. | ||
| NTF sl61UserTrap1092 | 1.3.6.1.4.1.3052.4.0.1092 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1092. | ||
| NTF sl61UserTrap1093 | 1.3.6.1.4.1.3052.4.0.1093 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1093. | ||
| NTF sl61UserTrap1094 | 1.3.6.1.4.1.3052.4.0.1094 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1094. | ||
| NTF sl61UserTrap1095 | 1.3.6.1.4.1.3052.4.0.1095 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1095. | ||
| NTF sl61UserTrap1096 | 1.3.6.1.4.1.3052.4.0.1096 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1096. | ||
| NTF sl61UserTrap1097 | 1.3.6.1.4.1.3052.4.0.1097 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1097. | ||
| NTF sl61UserTrap1098 | 1.3.6.1.4.1.3052.4.0.1098 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1098. | ||
| NTF sl61UserTrap1099 | 1.3.6.1.4.1.3052.4.0.1099 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1099. | ||
| NTF sl61UserTrap1100 | 1.3.6.1.4.1.3052.4.0.1100 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1100. | ||
| NTF sl61UserTrap1101 | 1.3.6.1.4.1.3052.4.0.1101 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1101. | ||
| NTF sl61UserTrap1102 | 1.3.6.1.4.1.3052.4.0.1102 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1102. | ||
| NTF sl61UserTrap1103 | 1.3.6.1.4.1.3052.4.0.1103 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1103. | ||
| NTF sl61UserTrap1104 | 1.3.6.1.4.1.3052.4.0.1104 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1104. | ||
| NTF sl61UserTrap1105 | 1.3.6.1.4.1.3052.4.0.1105 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1105. | ||
| NTF sl61UserTrap1106 | 1.3.6.1.4.1.3052.4.0.1106 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1106. | ||
| NTF sl61UserTrap1107 | 1.3.6.1.4.1.3052.4.0.1107 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1107. | ||
| NTF sl61UserTrap1108 | 1.3.6.1.4.1.3052.4.0.1108 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1108. | ||
| NTF sl61UserTrap1109 | 1.3.6.1.4.1.3052.4.0.1109 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1109. | ||
| NTF sl61UserTrap1110 | 1.3.6.1.4.1.3052.4.0.1110 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1110. | ||
| NTF sl61UserTrap1111 | 1.3.6.1.4.1.3052.4.0.1111 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1111. | ||
| NTF sl61UserTrap1112 | 1.3.6.1.4.1.3052.4.0.1112 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1112. | ||
| NTF sl61UserTrap1113 | 1.3.6.1.4.1.3052.4.0.1113 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1113. | ||
| NTF sl61UserTrap1114 | 1.3.6.1.4.1.3052.4.0.1114 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1114. | ||
| NTF sl61UserTrap1115 | 1.3.6.1.4.1.3052.4.0.1115 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1115. | ||
| NTF sl61UserTrap1116 | 1.3.6.1.4.1.3052.4.0.1116 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1116. | ||
| NTF sl61UserTrap1117 | 1.3.6.1.4.1.3052.4.0.1117 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1117. | ||
| NTF sl61UserTrap1118 | 1.3.6.1.4.1.3052.4.0.1118 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1118. | ||
| NTF sl61UserTrap1119 | 1.3.6.1.4.1.3052.4.0.1119 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1119. | ||
| NTF sl61UserTrap1120 | 1.3.6.1.4.1.3052.4.0.1120 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1120. | ||
| NTF sl61UserTrap1121 | 1.3.6.1.4.1.3052.4.0.1121 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1121. | ||
| NTF sl61UserTrap1122 | 1.3.6.1.4.1.3052.4.0.1122 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1122. | ||
| NTF sl61UserTrap1123 | 1.3.6.1.4.1.3052.4.0.1123 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1123. | ||
| NTF sl61UserTrap1124 | 1.3.6.1.4.1.3052.4.0.1124 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1124. | ||
| NTF sl61UserTrap1125 | 1.3.6.1.4.1.3052.4.0.1125 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1125. | ||
| NTF sl61UserTrap1126 | 1.3.6.1.4.1.3052.4.0.1126 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1126. | ||
| NTF sl61UserTrap1127 | 1.3.6.1.4.1.3052.4.0.1127 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1127. | ||
| NTF sl61UserTrap1128 | 1.3.6.1.4.1.3052.4.0.1128 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1128. | ||
| NTF sl61UserTrap1129 | 1.3.6.1.4.1.3052.4.0.1129 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1129. | ||
| NTF sl61UserTrap1130 | 1.3.6.1.4.1.3052.4.0.1130 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1130. | ||
| NTF sl61UserTrap1131 | 1.3.6.1.4.1.3052.4.0.1131 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1131. | ||
| NTF sl61UserTrap1132 | 1.3.6.1.4.1.3052.4.0.1132 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1132. | ||
| NTF sl61UserTrap1133 | 1.3.6.1.4.1.3052.4.0.1133 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1133. | ||
| NTF sl61UserTrap1134 | 1.3.6.1.4.1.3052.4.0.1134 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1134. | ||
| NTF sl61UserTrap1135 | 1.3.6.1.4.1.3052.4.0.1135 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1135. | ||
| NTF sl61UserTrap1136 | 1.3.6.1.4.1.3052.4.0.1136 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1136. | ||
| NTF sl61UserTrap1137 | 1.3.6.1.4.1.3052.4.0.1137 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1137. | ||
| NTF sl61UserTrap1138 | 1.3.6.1.4.1.3052.4.0.1138 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1138. | ||
| NTF sl61UserTrap1139 | 1.3.6.1.4.1.3052.4.0.1139 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1139. | ||
| NTF sl61UserTrap1140 | 1.3.6.1.4.1.3052.4.0.1140 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1140. | ||
| NTF sl61UserTrap1141 | 1.3.6.1.4.1.3052.4.0.1141 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1141. | ||
| NTF sl61UserTrap1142 | 1.3.6.1.4.1.3052.4.0.1142 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1142. | ||
| NTF sl61UserTrap1143 | 1.3.6.1.4.1.3052.4.0.1143 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1143. | ||
| NTF sl61UserTrap1144 | 1.3.6.1.4.1.3052.4.0.1144 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1144. | ||
| NTF sl61UserTrap1145 | 1.3.6.1.4.1.3052.4.0.1145 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1145. | ||
| NTF sl61UserTrap1146 | 1.3.6.1.4.1.3052.4.0.1146 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1146. | ||
| NTF sl61UserTrap1147 | 1.3.6.1.4.1.3052.4.0.1147 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1147. | ||
| NTF sl61UserTrap1148 | 1.3.6.1.4.1.3052.4.0.1148 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1148. | ||
| NTF sl61UserTrap1149 | 1.3.6.1.4.1.3052.4.0.1149 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1149. | ||
| NTF sl61UserTrap1150 | 1.3.6.1.4.1.3052.4.0.1150 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1150. | ||
| NTF sl61UserTrap1151 | 1.3.6.1.4.1.3052.4.0.1151 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1151. | ||
| NTF sl61UserTrap1152 | 1.3.6.1.4.1.3052.4.0.1152 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1152. | ||
| NTF sl61UserTrap1153 | 1.3.6.1.4.1.3052.4.0.1153 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1153. | ||
| NTF sl61UserTrap1154 | 1.3.6.1.4.1.3052.4.0.1154 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1154. | ||
| NTF sl61UserTrap1155 | 1.3.6.1.4.1.3052.4.0.1155 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1155. | ||
| NTF sl61UserTrap1156 | 1.3.6.1.4.1.3052.4.0.1156 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1156. | ||
| NTF sl61UserTrap1157 | 1.3.6.1.4.1.3052.4.0.1157 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1157. | ||
| NTF sl61UserTrap1158 | 1.3.6.1.4.1.3052.4.0.1158 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1158. | ||
| NTF sl61UserTrap1159 | 1.3.6.1.4.1.3052.4.0.1159 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1159. | ||
| NTF sl61UserTrap1160 | 1.3.6.1.4.1.3052.4.0.1160 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1160. | ||
| NTF sl61UserTrap1161 | 1.3.6.1.4.1.3052.4.0.1161 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1161. | ||
| NTF sl61UserTrap1162 | 1.3.6.1.4.1.3052.4.0.1162 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1162. | ||
| NTF sl61UserTrap1163 | 1.3.6.1.4.1.3052.4.0.1163 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1163. | ||
| NTF sl61UserTrap1164 | 1.3.6.1.4.1.3052.4.0.1164 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1164. | ||
| NTF sl61UserTrap1165 | 1.3.6.1.4.1.3052.4.0.1165 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1165. | ||
| NTF sl61UserTrap1166 | 1.3.6.1.4.1.3052.4.0.1166 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1166. | ||
| NTF sl61UserTrap1167 | 1.3.6.1.4.1.3052.4.0.1167 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1167. | ||
| NTF sl61UserTrap1168 | 1.3.6.1.4.1.3052.4.0.1168 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1168. | ||
| NTF sl61UserTrap1169 | 1.3.6.1.4.1.3052.4.0.1169 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1169. | ||
| NTF sl61UserTrap1170 | 1.3.6.1.4.1.3052.4.0.1170 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1170. | ||
| NTF sl61UserTrap1171 | 1.3.6.1.4.1.3052.4.0.1171 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1171. | ||
| NTF sl61UserTrap1172 | 1.3.6.1.4.1.3052.4.0.1172 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1172. | ||
| NTF sl61UserTrap1173 | 1.3.6.1.4.1.3052.4.0.1173 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1173. | ||
| NTF sl61UserTrap1174 | 1.3.6.1.4.1.3052.4.0.1174 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1174. | ||
| NTF sl61UserTrap1175 | 1.3.6.1.4.1.3052.4.0.1175 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1175. | ||
| NTF sl61UserTrap1176 | 1.3.6.1.4.1.3052.4.0.1176 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1176. | ||
| NTF sl61UserTrap1177 | 1.3.6.1.4.1.3052.4.0.1177 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1177. | ||
| NTF sl61UserTrap1178 | 1.3.6.1.4.1.3052.4.0.1178 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1178. | ||
| NTF sl61UserTrap1179 | 1.3.6.1.4.1.3052.4.0.1179 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1179. | ||
| NTF sl61UserTrap1180 | 1.3.6.1.4.1.3052.4.0.1180 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1180. | ||
| NTF sl61UserTrap1181 | 1.3.6.1.4.1.3052.4.0.1181 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1181. | ||
| NTF sl61UserTrap1182 | 1.3.6.1.4.1.3052.4.0.1182 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1182. | ||
| NTF sl61UserTrap1183 | 1.3.6.1.4.1.3052.4.0.1183 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1183. | ||
| NTF sl61UserTrap1184 | 1.3.6.1.4.1.3052.4.0.1184 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1184. | ||
| NTF sl61UserTrap1185 | 1.3.6.1.4.1.3052.4.0.1185 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1185. | ||
| NTF sl61UserTrap1186 | 1.3.6.1.4.1.3052.4.0.1186 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1186. | ||
| NTF sl61UserTrap1187 | 1.3.6.1.4.1.3052.4.0.1187 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1187. | ||
| NTF sl61UserTrap1188 | 1.3.6.1.4.1.3052.4.0.1188 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1188. | ||
| NTF sl61UserTrap1189 | 1.3.6.1.4.1.3052.4.0.1189 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1189. | ||
| NTF sl61UserTrap1190 | 1.3.6.1.4.1.3052.4.0.1190 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1190. | ||
| NTF sl61UserTrap1191 | 1.3.6.1.4.1.3052.4.0.1191 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1191. | ||
| NTF sl61UserTrap1192 | 1.3.6.1.4.1.3052.4.0.1192 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1192. | ||
| NTF sl61UserTrap1193 | 1.3.6.1.4.1.3052.4.0.1193 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1193. | ||
| NTF sl61UserTrap1194 | 1.3.6.1.4.1.3052.4.0.1194 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1194. | ||
| NTF sl61UserTrap1195 | 1.3.6.1.4.1.3052.4.0.1195 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1195. | ||
| NTF sl61UserTrap1196 | 1.3.6.1.4.1.3052.4.0.1196 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1196. | ||
| NTF sl61UserTrap1197 | 1.3.6.1.4.1.3052.4.0.1197 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1197. | ||
| NTF sl61UserTrap1198 | 1.3.6.1.4.1.3052.4.0.1198 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1198. | ||
| NTF sl61UserTrap1199 | 1.3.6.1.4.1.3052.4.0.1199 | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1199. | ||
| status | 1.3.6.1.4.1.3052.4.1 | |||
| eventSensorStatus | 1.3.6.1.4.1.3052.4.1.1 | |||
| esPointTable | 1.3.6.1.4.1.3052.4.1.1.1 | not-accessible | This table organizes 4 basic attributes of points. A point is a particular sensor on an EventSensor (e.g., temperature, humidity, contact closure 2, relay 5, etc.). The 4 point attributes are its name, whether it's in its event state, the point's value as a number and its value as a string. Points are referenced by a point index. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). | |
| esPointEntry | 1.3.6.1.4.1.3052.4.1.1.1.1 | not-accessible | Entry for EventSensor point table | |
| INT esIndexES | 1.3.6.1.4.1.3052.4.1.1.1.1.1 | INTEGER | read-only | The part of the point index that refers to an EventSensor. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor. |
| INT esIndexPC | 1.3.6.1.4.1.3052.4.1.1.1.1.2 | INTEGER | read-only | The part of the point index that refers to point class. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). The values for this object are: 1=temperature sensor 2=contact closure 3=humidity sensor 4=noise sensor 5=analog input 6=relay |
| INT esIndexPoint | 1.3.6.1.4.1.3052.4.1.1.1.1.3 | INTEGER | read-only | The part of the point index that delineates which sensor on the EventSensor. So this combined with esIndexPC (Point Class or type) and esIndexES (which EventSensor) uniquely defines each point (sensor or relay) attached to a unit. For example, if esIndexES is 3, esIndexPC is 1 and esIndexPoint is 4 then this is the Fourth Temperature Sensor on EventSensor number 3. |
| STR esPointName | 1.3.6.1.4.1.3052.4.1.1.1.1.4 | DisplayString | read-write | The name of the point on an EventSensor. For example, 'AC temp' (in the case of the temperature sensor on an EventSensor). There can be multiple points of the same point class on an EventSensor (e.g., 8 contact closures) and multiple sensor classes on an EventSensor (e.g., temperature, contact closure, humidity). If the point referenced by a given point index is solitary (e.g., temperature sensor, because there can be only one on an EventSensor), then this object reads as ''. Setting this object for solitary point indices sets the EventSensor name only. On the other hand, if a given point is among other points of the same point class on an EventSensor, then this object reads as ''. Setting this object for these NON- solitary point indices sets the sensor name only - not the EventSensor name. |
| INT esPointInEventState | 1.3.6.1.4.1.3052.4.1.1.1.1.5 | INTEGER | read-write | A number referring to the event state of a point on an EventSensor. This number can have different meanings depending on the point class. If the point class is temperature, humidity, or analog input, then the values of this object are: 1=very low 2=low 3=normal 4=high 5=very high For contact closures and relays the values of this object are: 1=point in event state 2=point in normal state For any point class and any point, if the event state is undefined, then the value of this object is 0. For any point class except relay, this object is read-only. For relays, setting this object to 1 puts the relay into its event (active) state. Setting it to 2 puts the relay into its normal (inactive) state. Depending on how the relay's active state is configured in the setup menu, the relay will then open or close. This works regardless of the control mode of the relay. |
| INT esPointValueInt | 1.3.6.1.4.1.3052.4.1.1.1.1.6 | INTEGER | read-write | A number referring to the value of a point on an EventSensor. If the point class is temperature, then this object is the temperature in its configured scale (default is Fahrenheit). If the point class is contact closure or relay, then this object is either 0 (open) or 1 (closed). If the point class is humidity, then this object is the percent relative humidity. If the point class is analog input, then this object is the signed input value in tenths of the configured units. For any point class except relay, this object is read-only. For relays, setting this object to 1 closes the relay, while setting it to 0 opens it. This works regardless of the control mode of the relay. |
| STR esPointValueStr | 1.3.6.1.4.1.3052.4.1.1.1.1.7 | DisplayString | read-only | A string referring to the value of a point on an EventSensor. For contact closures and relays this object is either 'Open' or 'Closed'. For temperature and humidity point classes, this object is the string representation of the esPointValueInt object. For temperature, 'C' or 'F' is including in the string to indicate scale. For analog inputs, this object is the string representation of the plus/minus input in volts. |
| STR esPointTimeLastChange | 1.3.6.1.4.1.3052.4.1.1.1.1.8 | DisplayString | read-only | The time of the last time an event was triggerred for a point on an EventSensor in MM/DD/YY HH:MM:SS format. For contact closures, the possible events are Active and Inactive. For temperature, humidity, and analog inputs, the possible events are Normal, High, Very High, Low, and Very Low. For relays, this object is a null string. |
| TIK esPointTimetickLastChange | 1.3.6.1.4.1.3052.4.1.1.1.1.9 | TimeTicks | read-only | The time of the last time an event was triggerred for a point on an EventSensor in 100ths of seconds since reset. For contact closures, the possible events are Active and Inactive. For temperature, humidity, and analog inputs, the possible events are Normal, High, Very High, Low, and Very Low. For relays, this object is 0. |
| dataEventStatus | 1.3.6.1.4.1.3052.4.1.2 | |||
| deStatusTable | 1.3.6.1.4.1.3052.4.1.2.1 | not-accessible | Data Event Status Table | |
| deStatusEntry | 1.3.6.1.4.1.3052.4.1.2.1.1 | not-accessible | EventSensor status entry | |
| INT deStatusIndex | 1.3.6.1.4.1.3052.4.1.2.1.1.1 | INTEGER | read-only | Index for Data Events |
| STR deStatusName | 1.3.6.1.4.1.3052.4.1.2.1.1.2 | DisplayString | read-only | Data Event name |
| INT deStatusCounter | 1.3.6.1.4.1.3052.4.1.2.1.1.3 | INTEGER | read-only | Number of times a data record has matched this event's equation. Range: 1-999999999 |
| INT deStatusThreshold | 1.3.6.1.4.1.3052.4.1.2.1.1.4 | INTEGER | read-only | Number of times the equation is matched before an event is triggered. Range: 1-999999999 |
| STR deStatusLastTriggerTime | 1.3.6.1.4.1.3052.4.1.2.1.1.5 | DisplayString | read-only | Date/time that this event's counter last reached its threshold since the unit was last booted. If this event has not yet been triggered, then this value is a null string. Format: HH:MM |
| STR deStatusLastTriggerData | 1.3.6.1.4.1.3052.4.1.2.1.1.6 | DisplayString | read-only | Data (first 80 chars, or up to CR, whichever comes first) that caused this event's counter to reach the threshold. If this event has not yet been triggered, then this value is a null string. |
| config | 1.3.6.1.4.1.3052.4.2 | |||
| eventSensorBasics | 1.3.6.1.4.1.3052.4.2.1 | |||
| INT esNumberEventSensors | 1.3.6.1.4.1.3052.4.2.1.1 | INTEGER | read-only | The number of EventSensors recognized by the SL61, including the internal EventSensor. Range: 1-17 |
| esTable | 1.3.6.1.4.1.3052.4.2.1.2 | not-accessible | The table of what EventSensors are attached to the unit, including the internal EventSensor | |
| esEntry | 1.3.6.1.4.1.3052.4.2.1.2.1 | not-accessible | Table entry for EventSensor table | |
| INT esIndex | 1.3.6.1.4.1.3052.4.2.1.2.1.1 | INTEGER | read-only | This number refers to an EventSensor; it has the same meaning as the esIndexES object (see above), except that this object is used only within the esTable branch. This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndex=2 will now refer to that particular EventSensor. |
| STR esName | 1.3.6.1.4.1.3052.4.2.1.2.1.2 | DisplayString | read-only | The name of the EventSensor |
| STR esID | 1.3.6.1.4.1.3052.4.2.1.2.1.3 | DisplayString | read-only | The factory-assigned ID of the EventSensor |
| INT esNumberTempSensors | 1.3.6.1.4.1.3052.4.2.1.2.1.4 | INTEGER | read-only | The number of temperature sensors on the EventSensor |
| STR esTempReportingMode | 1.3.6.1.4.1.3052.4.2.1.2.1.5 | DisplayString | read-only | Description of how temperature values should be interpreted. |
| INT esNumberCCs | 1.3.6.1.4.1.3052.4.2.1.2.1.6 | INTEGER | read-only | The number of contact closures on the EventSensor. |
| STR esCCReportingMode | 1.3.6.1.4.1.3052.4.2.1.2.1.7 | DisplayString | read-only | Description of how CC values should be interpreted. |
| INT esNumberHumidSensors | 1.3.6.1.4.1.3052.4.2.1.2.1.8 | INTEGER | read-only | The number of humidity sensors on the EventSensor. |
| STR esHumidReportingMode | 1.3.6.1.4.1.3052.4.2.1.2.1.9 | DisplayString | read-only | Description of how humidity sensor values should be interpreted. |
| INT esNumberNoiseSensors | 1.3.6.1.4.1.3052.4.2.1.2.1.10 | INTEGER | read-only | The number of noise sensors on the EventSensor. |
| STR esNoiseReportingMode | 1.3.6.1.4.1.3052.4.2.1.2.1.11 | DisplayString | read-only | Description of how noise sensor values should be interpreted. |
| INT esNumberAirflowSensors | 1.3.6.1.4.1.3052.4.2.1.2.1.12 | INTEGER | read-only | The number of airflow sensors on the EventSensor. |
| STR esAirflowReportingMode | 1.3.6.1.4.1.3052.4.2.1.2.1.13 | DisplayString | read-only | Description of how airflow sensor values should be interpreted. |
| INT esNumberAnalog | 1.3.6.1.4.1.3052.4.2.1.2.1.14 | INTEGER | read-only | The number of analog inputs on the EventSensor. |
| STR esAnalogReportingMode | 1.3.6.1.4.1.3052.4.2.1.2.1.15 | DisplayString | read-only | Description of how analog input values should be interpreted. |
| INT esNumberRelayOutputs | 1.3.6.1.4.1.3052.4.2.1.2.1.16 | INTEGER | read-only | The number of relay outputs on the EventSensor |
| STR esRelayReportingMode | 1.3.6.1.4.1.3052.4.2.1.2.1.17 | DisplayString | read-only | Description of how relay output values should be interpreted. |
| dataEventConfig | 1.3.6.1.4.1.3052.4.2.2 | |||
| deFieldTable | 1.3.6.1.4.1.3052.4.2.2.1 | not-accessible | Data event field table | |
| deFieldEntry | 1.3.6.1.4.1.3052.4.2.2.1.1 | not-accessible | Data event field entry | |
| INT deFieldIndex | 1.3.6.1.4.1.3052.4.2.2.1.1.1 | INTEGER | read-only | Index for data alarm |
| INT deFieldStart | 1.3.6.1.4.1.3052.4.2.2.1.1.2 | INTEGER | read-write | The start position of the data event field. 1 is the value of the first position. Range: 0-160; 0 disables the field. |
| INT deFieldLength | 1.3.6.1.4.1.3052.4.2.2.1.1.3 | INTEGER | read-write | The length of the data event field. Range: 1-160 |
| STR deFieldName | 1.3.6.1.4.1.3052.4.2.2.1.1.4 | DisplayString | read-write | The name of the data event field. |
| deConfigTable | 1.3.6.1.4.1.3052.4.2.2.2 | not-accessible | Table for configuring data events. | |
| deConfigEntry | 1.3.6.1.4.1.3052.4.2.2.2.1 | not-accessible | Entry for Data Event Config table | |
| INT deConfigIndex | 1.3.6.1.4.1.3052.4.2.2.2.1.1 | INTEGER | read-only | Index for Data Event Config table |
| INT deConfigEnabled | 1.3.6.1.4.1.3052.4.2.2.2.1.2 | INTEGER | read-write | 0 = not enabled; 1 = enabled |
| STR deConfigName | 1.3.6.1.4.1.3052.4.2.2.2.1.3 | DisplayString | read-write | Name of the data event |
| STR deConfigEquation | 1.3.6.1.4.1.3052.4.2.2.2.1.4 | DisplayString | read-write | Equation for the data event |
| INT deConfigThreshold | 1.3.6.1.4.1.3052.4.2.2.2.1.5 | INTEGER | read-write | Number of times the equation is matched before an event is triggered. Range: 1-999999999 |
| INT deConfigClearMode | 1.3.6.1.4.1.3052.4.2.2.2.1.6 | INTEGER | read-write | Value representing at what interval the unit clears its data event counters. 0 = never; 1 = 2 hrs; 2 = 4 hrs; 3 = 6 hrs; 4 = 8 hrs; 5 = 12 hrs; 6 = daily |
| STR deConfigClearTime | 1.3.6.1.4.1.3052.4.2.2.2.1.7 | DisplayString | read-write | HH:MM representing the time of day at which this data event is cleared. |
| INT deConfigAutoClear | 1.3.6.1.4.1.3052.4.2.2.2.1.8 | INTEGER | read-write | 1=counter for this event clears when threshold is reached. 0=counter doesn't clear. |
| STR deConfigActions | 1.3.6.1.4.1.3052.4.2.2.2.1.9 | DisplayString | read-write | String that describes what actions are associated with this data event. It is formatted 'TxxxxxxxxPxxxx', where x is a digit that corresponds to which trap manager/pager slot to use. T means Trap and P means Pager. If there are no slots defined for a trap manager/pager, then the T/P is omitted. |
| INT deConfigTrapNumber | 1.3.6.1.4.1.3052.4.2.2.2.1.10 | INTEGER | read-write | Trap number to use when sending a trap. Range: 100 or (1000-1199) |
| INT deConfigClass | 1.3.6.1.4.1.3052.4.2.2.2.1.11 | INTEGER | read-write | The class to use for this data event |
| serialPorts | 1.3.6.1.4.1.3052.4.2.3 | |||
| INT numberPorts | 1.3.6.1.4.1.3052.4.2.3.1 | INTEGER | read-only | Number of RS-232 ports found. Range: 2 or 4 |
| portConfigTable | 1.3.6.1.4.1.3052.4.2.3.2 | not-accessible | Port config table | |
| portConfigEntry | 1.3.6.1.4.1.3052.4.2.3.2.1 | not-accessible | Port config entry | |
| INT portConfigIndex | 1.3.6.1.4.1.3052.4.2.3.2.1.1 | INTEGER | read-only | Index for ports |
| INT portConfigBaud | 1.3.6.1.4.1.3052.4.2.3.2.1.2 | INTEGER | read-write | Baud rate, 19200, 9600, etc. |
| INT portConfigDataFormat | 1.3.6.1.4.1.3052.4.2.3.2.1.3 | INTEGER | read-write | Value representing word length, parity, and stop bits: 0=8N1, 1=7E1, 2=7O1, 3=7N1 |
| INT portConfigStripPtOutputLfs | 1.3.6.1.4.1.3052.4.2.3.2.1.4 | INTEGER | read-write | Strip passthrough LFs sent to device on this port: 1=yes, 0=no. |
| INT portConfigStripPtInputLfs | 1.3.6.1.4.1.3052.4.2.3.2.1.5 | INTEGER | read-write | Strip passthrough LFs received from device on this port: 1=yes, 0=no. |
| INT portConfigDTRLowIdle | 1.3.6.1.4.1.3052.4.2.3.2.1.6 | INTEGER | read-write | 0=DTR always low; 1=DTR low except when pass- through is active. |
| INT portConfigMaskEnable | 1.3.6.1.4.1.3052.4.2.3.2.1.7 | INTEGER | read-write | 1=Use the character mask on this port. 0=Do not use the mask. When the mask is enabled, the following ASCII characters are ignored on the port: 0, 1, 4-9, 11, 12, 14-31, 128-255. When the mask is disabled, all characters are accepted on the port. |
| INT portConfigDAEnable | 1.3.6.1.4.1.3052.4.2.3.2.1.8 | INTEGER | read-write | 1=Enable the Data Alarm Evaluator for data on this port. 0=Do not evaluate data on this port. |
| network | 1.3.6.1.4.1.3052.4.2.4 | |||
| INT ipConfigStatic | 1.3.6.1.4.1.3052.4.2.4.1 | INTEGER | read-only | 0= IP address is dynamically obtained. 1= IP address is statically assigned. |
| IP ipConfigAddress | 1.3.6.1.4.1.3052.4.2.4.2 | IpAddress | read-write | Current IP address |
| IP ipConfigSubnetMask | 1.3.6.1.4.1.3052.4.2.4.3 | IpAddress | read-write | Current subnet mask |
| IP ipConfigDefaultRouter | 1.3.6.1.4.1.3052.4.2.4.4 | IpAddress | read-write | Current default router (gateway) |
| INT ipConfigEngage | 1.3.6.1.4.1.3052.4.2.4.5 | INTEGER | read-write | Read=0. Write requires private community name. Any write causes the current object values for ipConfigAddress, ipConfigSubnetMask, and ipConfigDefaultRouter to be used. Causes the unit to reinitialize its network stacks with these new values. Changes to ipConfigStatic, ipConfigAddress, ipConfigSubnetMask, or ipConfigDefaultRouter do not affect the network stack until ipConfigEngage is written with some value. |
| INT telnetDuplex | 1.3.6.1.4.1.3052.4.2.4.6 | INTEGER | read-write | 1=Input characters are echoed; 0=no echo. |
| modem | 1.3.6.1.4.1.3052.4.2.5 | |||
| INT modemDataFormat | 1.3.6.1.4.1.3052.4.2.5.1 | INTEGER | read-write | Value representing word length, parity, and stop bits: 0=8N1, 1=7E1, 2=7O1, 3=7N1 |
| STR modemUserSetup | 1.3.6.1.4.1.3052.4.2.5.2 | DisplayString | read-write | Sent to modem on init before the factory setup string |
| STR modemTAPSetup | 1.3.6.1.4.1.3052.4.2.5.3 | DisplayString | read-write | Sent to modem just before doing TAP (alpha pager) protocol |
| INT modemTimeBetweenOutbound | 1.3.6.1.4.1.3052.4.2.5.5 | INTEGER | read-write | # seconds (minimum) between outbound call attempts. Range: 60-400 |
| snmp | 1.3.6.1.4.1.3052.4.2.6 | |||
| smTable | 1.3.6.1.4.1.3052.4.2.6.1 | not-accessible | SNMP manager table | |
| smEntry | 1.3.6.1.4.1.3052.4.2.6.1.1 | not-accessible | SNMP manager table entry | |
| INT smIndex | 1.3.6.1.4.1.3052.4.2.6.1.1.1 | INTEGER | read-only | Index for SNMP manager table |
| IP smAddress | 1.3.6.1.4.1.3052.4.2.6.1.1.2 | IpAddress | read-write | IP address of SNMP manager |
| pagers | 1.3.6.1.4.1.3052.4.2.7 | |||
| INT pagerRetries | 1.3.6.1.4.1.3052.4.2.7.1 | INTEGER | read-write | Number of times to retry a pager callout. Range: 0-255 |
| pagerTable | 1.3.6.1.4.1.3052.4.2.7.2 | not-accessible | Table of pager configurations | |
| pagerEntry | 1.3.6.1.4.1.3052.4.2.7.2.1 | not-accessible | Pager table entry | |
| INT pagerIndex | 1.3.6.1.4.1.3052.4.2.7.2.1.1 | INTEGER | read-only | Index for pager configuration table |
| INT pagerType | 1.3.6.1.4.1.3052.4.2.7.2.1.2 | INTEGER | read-write | 65=alphanumeric; 78=numeric |
| STR pagerPhoneNumber | 1.3.6.1.4.1.3052.4.2.7.2.1.3 | DisplayString | read-write | Phone number to dial |
| STR pagerID | 1.3.6.1.4.1.3052.4.2.7.2.1.4 | DisplayString | read-write | For alphanumeric pagers only, the Pager ID string provided by your paging company. |
| INT pagerPostCalloutDelay | 1.3.6.1.4.1.3052.4.2.7.2.1.5 | INTEGER | read-write | For numeric pagers, seconds to wait after dialing to to send message. Range: 0-255 |
| INT pagerIDDelay | 1.3.6.1.4.1.3052.4.2.7.2.1.6 | INTEGER | read-write | For numeric pagers, seconds to wait after sending message to hang up. Range: 0-255 |
| time | 1.3.6.1.4.1.3052.4.2.8 | |||
| STR clock | 1.3.6.1.4.1.3052.4.2.8.1 | DisplayString | read-write | Text string for date and time; e.g. 'SUN 01/02/98 12:34:27'. When setting this object, only the date and time are required; the unit will ignore a specified day of week because it is calculated from the date and time. When this object is included in a notification as a varbind, it represents the time that the triggering event occurred. |
| INT autoDSTAdjust | 1.3.6.1.4.1.3052.4.2.8.2 | INTEGER | read-write | 0=do not auto adjust; 1=auto adjust for daylight savings. |
| timeouts | 1.3.6.1.4.1.3052.4.2.9 | |||
| INT commandTimeout | 1.3.6.1.4.1.3052.4.2.9.1 | INTEGER | read-write | Number of minutes of inactivity before a command session automatically disconnects. 0 means it never disconnects. |
| INT passthroughTimeout | 1.3.6.1.4.1.3052.4.2.9.2 | INTEGER | read-write | Number of minutes of inactivity before a passthrough session automatically disconnects. 0 means it never disconnects. |
| productIds | 1.3.6.1.4.1.3052.4.3 | |||
| STR siteID | 1.3.6.1.4.1.3052.4.3.1 | DisplayString | read-write | Site ID string; Max 40 characters. |
| STR thisProduct | 1.3.6.1.4.1.3052.4.3.2 | DisplayString | read-only | This is a factory configured string for the product name. |
| STR stockTrapString | 1.3.6.1.4.1.3052.4.3.3 | DisplayString | read-only | This string is included in every stock trap. |
| INT trapEventTypeNumber | 1.3.6.1.4.1.3052.4.3.4 | INTEGER | read-only | The user-defined trap variable for the type of event that happened. Here are the definitions: 1 Data Alarm 10 Contact Closure Active 11 Contact Closure Inactive 12 Temperature High 13 Temperature Very High 14 Temperature Low 15 Temperature Very Low 16 Temperature Return to Normal 17 Humidity High 18 Humidity Very High 19 Humidity Low 20 Humidity Very Low 21 Humidity Return to Normal 26 Analog High 27 Analog Very High 28 Analog Low 29 Analog Very Low 30 Analog Normal 40 EventSensor Unresponsive 100 Contact Closure Active Reminder 101 Temperature High Reminder 102 Temperature High Very Reminder 103 Temperature Low Reminder 104 Temperature Very Low Reminder 105 Humidity High Reminder 106 Humidity Very High Reminder 107 Humidity Low Reminder 108 Humidity Very Low Reminder 109 Analog High Reminder 110 Analog Very High Reminder 111 Analog Low Reminder 112 Analog Very Low Reminder |
| STR trapEventTypeName | 1.3.6.1.4.1.3052.4.3.5 | DisplayString | read-only | The user-defined trap variable for the string corresponding to the event type. |
| INT trapIncludedValue | 1.3.6.1.4.1.3052.4.3.6 | INTEGER | read-only | The user-defined trap variable for the generic included value. |
| STR trapIncludedString | 1.3.6.1.4.1.3052.4.3.7 | DisplayString | read-only | The user-defined trap variable for the generic included string. |
| INT trapEventClassNumber | 1.3.6.1.4.1.3052.4.3.9 | INTEGER | not-accessible | The user-defined trap variable for the configurable class number associated with the triggering event. |
| INT trapEventClassName | 1.3.6.1.4.1.3052.4.3.10 | INTEGER | not-accessible | The user-defined trap variable for the configurable class name associated with the class number. |
| techSupport | 1.3.6.1.4.1.3052.4.99 | |||
| INT techSupport1 | 1.3.6.1.4.1.3052.4.99.1 | INTEGER | read-write | |
| techSupport2 | 1.3.6.1.4.1.3052.4.99.2 | |||
| INT techSupport2n1 | 1.3.6.1.4.1.3052.4.99.2.1 | INTEGER | read-write | |
| INT techSupport2n2 | 1.3.6.1.4.1.3052.4.99.2.2 | INTEGER | read-write | |
| techSupport3 | 1.3.6.1.4.1.3052.4.99.3 | |||
| INT techSupport3n1 | 1.3.6.1.4.1.3052.4.99.3.1 | INTEGER | read-write | |
| INT techSupport3n2 | 1.3.6.1.4.1.3052.4.99.3.2 | INTEGER | read-write | |
| INT techSupport3n3 | 1.3.6.1.4.1.3052.4.99.3.3 | INTEGER | read-write | |
| INT techSupport3n4 | 1.3.6.1.4.1.3052.4.99.3.4 | INTEGER | read-write | |
| INT techSupport3n5 | 1.3.6.1.4.1.3052.4.99.3.5 | INTEGER | read-write | |
| INT techSupport4 | 1.3.6.1.4.1.3052.4.99.4 | INTEGER | read-write | |
| INT techSupport7 | 1.3.6.1.4.1.3052.4.99.7 | INTEGER | read-write | |
| INT techSupport9 | 1.3.6.1.4.1.3052.4.99.9 | INTEGER | read-write | |
| STR techSupport10 | 1.3.6.1.4.1.3052.4.99.10 | DisplayString | read-write | |
| INT techSupport11 | 1.3.6.1.4.1.3052.4.99.11 | INTEGER | read-write | |
| INT techSupport16 | 1.3.6.1.4.1.3052.4.99.16 | INTEGER | read-write | |
| INT techSupport17 | 1.3.6.1.4.1.3052.4.99.17 | INTEGER | read-write | |
| INT techSupport18 | 1.3.6.1.4.1.3052.4.99.18 | INTEGER | read-write | |
| STR techSupport19 | 1.3.6.1.4.1.3052.4.99.19 | DisplayString | read-write | |
| techSupport20Table | 1.3.6.1.4.1.3052.4.99.20 | not-accessible | ||
| techSupport20Entry | 1.3.6.1.4.1.3052.4.99.20.1 | not-accessible | ||
| INT techSupport20Index | 1.3.6.1.4.1.3052.4.99.20.1.1 | INTEGER | read-only | |
| STR techSupport20 | 1.3.6.1.4.1.3052.4.99.20.1.2 | DisplayString | read-write | |
| techSupport21Table | 1.3.6.1.4.1.3052.4.99.21 | not-accessible | ||
| techSupport21Entry | 1.3.6.1.4.1.3052.4.99.21.1 | not-accessible | ||
| INT techSupport21Index | 1.3.6.1.4.1.3052.4.99.21.1.1 | INTEGER | read-only | |
| INT techSupport21 | 1.3.6.1.4.1.3052.4.99.21.1.2 | INTEGER | read-only | |
| INT techSupport22 | 1.3.6.1.4.1.3052.4.99.22 | INTEGER | read-write | |
| STR techSupport24 | 1.3.6.1.4.1.3052.4.99.24 | DisplayString | read-write | |
| STR techSupport25 | 1.3.6.1.4.1.3052.4.99.25 | DisplayString | read-write | |
| STR techSupport26 | 1.3.6.1.4.1.3052.4.99.26 | DisplayString | read-write |
RFC description
Standard MIB for the SL61 platform, providing device management and operational status objects for this networking or telecom product.
Start monitoring Omnitronix SL61 remote-site environmental monitoring unit (event-sensor/pager alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.