All MIBs › SL61-STD-MIB › portConfigMaskEnable
portConfigMaskEnable
Module: SL61-STD-MIB
OID (symbolic): SL61-STD-MIB::portConfigMaskEnable
OID (numeric): 1.3.6.1.4.1.3052.4.2.3.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 1=Use the character mask on this port. 0=Do not use the mask. When the mask is enabled, the following ASCII characters are ignored on the port: 0, 1, 4-9, 11, 12, 14-31, 128-255. When the mask is disabled, all characters are accepted on the port.
What is portConfigMaskEnable?
Whether this port applies a character mask that filters out certain non-printable ASCII control characters (codes 0,1,4-9,11,12,14-31,128-255) from incoming data (1=mask enabled, 0=accept all characters).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.4.2.3.2.1.7 snmpwalk -v2c -c public <target> SL61-STD-MIB::portConfigMaskEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.4.2.3.2.1.7.1 snmpget -v2c -c public <target> SL61-STD-MIB::portConfigMaskEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.4.2.3.2.1.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> portConfigMaskEnable.1
Start monitoring Omnitronix SL61 remote-site environmental monitoring unit (event-sensor/pager alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL61-STD-MIB::portConfigMaskEnable OID value, configure state conditions and alerts, and monitor any Omnitronix SL61 remote-site environmental monitoring unit (event-sensor/pager alarm status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.4 | sl61 | SL61-STD-MIB |
| 1.3.6.1.4.1.3052.4.2 | config | SL61-STD-MIB |
| 1.3.6.1.4.1.3052.4.2.3 | serialPorts | SL61-STD-MIB |
| 1.3.6.1.4.1.3052.4.2.3.2 | portConfigTable | SL61-STD-MIB |
| 1.3.6.1.4.1.3052.4.2.3.2.1 | portConfigEntry | SL61-STD-MIB |
| 1.3.6.1.4.1.3052.4.2.3.2.1.7 | portConfigMaskEnable | SL61-STD-MIB |