All MIBs › SL61-STD-MIB › techSupport1
techSupport1
Module: SL61-STD-MIB
OID (symbolic): SL61-STD-MIB::techSupport1
OID (numeric): 1.3.6.1.4.1.3052.4.99.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is techSupport1?
A read-write INTEGER register in the MIB's dedicated "Tech Support" section; its own DESCRIPTION is empty in the source MIB, so its exact purpose is undocumented outside a vendor support session, but its placement alongside similar techSupportN registers suggests it's a raw diagnostic value or setting used by technical support during troubleshooting rather than something an admin would set during normal operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.4.99.1 snmpwalk -v2c -c public <target> SL61-STD-MIB::techSupport1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.4.99.1.1 snmpget -v2c -c public <target> SL61-STD-MIB::techSupport1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.4.99.1.1 i <value>
Start monitoring Omnitronix SL61 remote-site environmental monitoring unit (event-sensor/pager alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL61-STD-MIB::techSupport1 OID value, configure state conditions and alerts, and monitor any Omnitronix SL61 remote-site environmental monitoring unit (event-sensor/pager alarm status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.4 | sl61 | SL61-STD-MIB |
| 1.3.6.1.4.1.3052.4.99 | techSupport | SL61-STD-MIB |
| 1.3.6.1.4.1.3052.4.99.1 | techSupport1 | SL61-STD-MIB |