All MIBs › SAF-MPMUX-MIB › switchReason
switchReason
Module: SAF-MPMUX-MIB
OID (symbolic): SAF-MPMUX-MIB::switchReason
OID (numeric): 1.3.6.1.4.1.7571.100.1.1.2.22.5.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: 100 - command SWITCH FORCE OFF 101 - command SWITCH FORCE 1 102 - command SWITCH FORCE 2 103 - command SWITCH ACTIVE 1 104 - command SWITCH ACTIVE 2 105 - active ODU changed from 1 to 2 because of power problems in ODU1 106 - active ODU changed from 2 to 2 because of power problems in ODU2 107 - active ODU changed from 1 to 2 because of cable problems in ODU1 108 - active ODU changed from 2 to 1 because of cable problems in ODU2 109 - active ODU changed from 1 to 2 because of SyncLoss problems when active ODU1 110 - active ODU changed from 2 to 1 because of SyncLoss problems when active ODU2 111 - active ODU changed from 1 to 2 because of RAI problems when active ODU1 112 - active ODU changed from 2 to 1 because of RAI problems when active ODU2 113 - active ODU changed from 1 to 2 because of RXLEV problems in ODU1 114 - active ODU changed from 2 to 1 because of RXLEV problems in ODU2 115 - active ODU changed from 1 to 2 because of BER problems when active ODU1 116 - active ODU changed from 2 to 1 because of BER problems when active ODU2
What is switchReason?
Reports a numeric code for why the most recent protection switch occurred -- e.g. 100-104 for manually issued SWITCH FORCE/ACTIVE commands, and 105-116 for automatic switchovers triggered by ODU power, cable, sync-loss, RAI, receive-level, or BER problems on the previously active radio. Admins read this after an unexpected failover to determine whether it was operator-initiated or caused by a specific detected fault, and which radio/condition triggered it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.2.22.5.14 snmpwalk -v2c -c public <target> SAF-MPMUX-MIB::switchReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.2.22.5.14.1 snmpget -v2c -c public <target> SAF-MPMUX-MIB::switchReason.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> switchReason.1
Start monitoring SAF Tehnika microwave radio multiplexer terminal, backhaul indoor unit (IDU) (temperature/frame errors) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SAF-MPMUX-MIB::switchReason OID value, configure state conditions and alerts, and monitor any SAF Tehnika microwave radio multiplexer terminal, backhaul indoor unit (IDU) (temperature/frame errors) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7571 | saf | SAF-ENTERPRISE |
| 1.3.6.1.4.1.7571.100 | tehnika | SAF-ENTERPRISE |
| 1.3.6.1.4.1.7571.100.1 | microwaveRadio | SAF-ENTERPRISE |
| 1.3.6.1.4.1.7571.100.1.1 | pointToPoint | SAF-ENTERPRISE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7571.100.1.1.2 | cfm22 | SAF-MPMUX-MIB |
| 1.3.6.1.4.1.7571.100.1.1.2.22 | mpmux | SAF-MPMUX-MIB |
| 1.3.6.1.4.1.7571.100.1.1.2.22.5 | switchCtrl | SAF-MPMUX-MIB |
| 1.3.6.1.4.1.7571.100.1.1.2.22.5.14 | switchReason | SAF-MPMUX-MIB |