RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB

All MIBs › RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB

Organization: Riverstone Networks, Inc

Last Updated: 2005-05-31

Category: Riverstone Networks

Description: Extends standard traceroute MIB with Riverstone-specific path discovery and hop result objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB?

RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB extends the IETF traceRoute MIB (RFC 2925) with Riverstone-specific control objects for specialized path-discovery mechanisms, including Ethernet OAM traceroute and MPLS LSP traceroute over LDP and RSVP signaling. It exposes configuration tables for initiating and controlling these extended traceroute operations, such as target address, VLAN, priority, and tunnel identifiers, rather than passive counters. This is a network-diagnostic/software-feature MIB used to actively test connectivity and path health across Ethernet OAM domains and MPLS tunnels, helping confirm whether a given LSP or VLAN path is reachable and healthy. It explicitly depends on and extends RFC 2925's traceRouteMIB. It is used in service-provider environments running MPLS/Ethernet OAM on Riverstone equipment, where operators trigger these extended traceroutes to troubleshoot tunnel or VLAN path failures. Engineers can download the RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Riverstone Networks routers/switches running MPLS or Ethernet OAM

Monitoring Examples

To test an Ethernet OAM path, an admin populates rsTraceRouteEtherOamCtlTable (rsTraceRouteEtherOamCtlEntry) with rsTraceRouteEtherOamCtlTargetAddress, rsTraceRouteEtherOamCtlVlanId, and rsTraceRouteEtherOamCtlPriority, then reads back hop results. For MPLS diagnostics, rsTraceRouteLspLdpCtlTable/rsTraceRouteLspRsvpCtlTable entries configured with rsTraceRouteLspRsvpCtlTgtTunnelId let an operator trace a specific RSVP tunnel; a trace that fails to reach the target tunnel ID reveals a broken or misrouted LSP. These control-table driven traces reveal path failures not visible from simple interface counters.

What Can Be Monitored

Ethernet OAM traceroute results by VLAN/target
LDP-signaled LSP traceroute results
RSVP-signaled LSP traceroute results by tunnel ID

Imported Objects

From MPLS-TE-MIB

MplsTunnelIndex

From Q-BRIDGE-MIB

VlanIndex

From RIVERSTONE-SMI-MIB

riverstoneMibs

OBJECT-IDENTITY

From RIVERSTONE-TC-MIB

RsContextId
RsDomainList

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
rsTraceRouteCompliance	1.3.6.1.4.1.5567.2.56.2.1.1			The compliance statement for RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB.
rsTraceRouteCompliances	1.3.6.1.4.1.5567.2.56.2.1
rsTraceRouteConformance	1.3.6.1.4.1.5567.2.56.2
rsTraceRouteEtherHopsEntry	1.3.6.1.4.1.5567.2.56.1.15.1		not-accessible	Defines an entry in the rsTraceRouteEtherHopsTable. All indexes are defined in RFC2925.
rsTraceRouteEtherHopsGroup	1.3.6.1.4.1.5567.2.56.2.2.15			The group of objects that are needed for Ethernet OAM traceRoute Hops.
STR rsTraceRouteEtherHopsInportContextId	1.3.6.1.4.1.5567.2.56.1.15.1.3	RsContextId	read-only	Indicates the Inport ContextId at a hop.
OCT rsTraceRouteEtherHopsInportName	1.3.6.1.4.1.5567.2.56.1.15.1.4	OCTET STRING	read-only	Indicates the Inport Port Name at a hop
VLA rsTraceRouteEtherHopsInportVlanId	1.3.6.1.4.1.5567.2.56.1.15.1.2	VlanIndex	read-only	Indicates the Inport VlanId at a hop.
STR rsTraceRouteEtherHopsOutportContextId	1.3.6.1.4.1.5567.2.56.1.15.1.6	RsContextId	read-only	Indicates the Output ContextId at a hop.
OCT rsTraceRouteEtherHopsOutportName	1.3.6.1.4.1.5567.2.56.1.15.1.7	OCTET STRING	read-only	Indicates the Output Port Name at a hop
VLA rsTraceRouteEtherHopsOutportVlanId	1.3.6.1.4.1.5567.2.56.1.15.1.5	VlanIndex	read-only	Indicates the Outport VlanId at a hop.
rsTraceRouteEtherHopsTable	1.3.6.1.4.1.5567.2.56.1.15		not-accessible	Extends the traceRouteHopsTable for providing, via SNMP, the capability of performing trace path operations at a remote host by L2 MAC address. Restrictions: Following objects of traceRouteProbeHopsEntry are not used when traceRouteCtlType is of rsTraceRouteEthernetOAM. traceRouteHopsIpTgtAddressType, traceRouteHopsIpTgtAddress,
MAC rsTraceRouteEtherHopsTargetAddress	1.3.6.1.4.1.5567.2.56.1.15.1.1	MacAddress	read-only	Indicates the host L2 MAC address at a hop. This object essentially replaces traceRouteHopsIpTgtAddress and traceRouteCtrTargetAddress in traceRouteHopsTable.
rsTraceRouteEthernetOam	1.3.6.1.4.1.5567.2.56.3.5			Indicates that an implementation is using Ethernet OAM multicast frames to perform the traceroute operation
STR rsTraceRouteEtherOamCtlContextId	1.3.6.1.4.1.5567.2.56.1.5.1.4	RsContextId	read-create	Context Id in which the OAM frames will be transmitted.
rsTraceRouteEtherOamCtlEntry	1.3.6.1.4.1.5567.2.56.1.5.1		not-accessible	Defines an entry in the rsTraceRouteEtherOamCtlTable. The index elements traceRouteCtlOwnerIndex and traceRouteCtlTestName are defined in RFC2925.
rsTraceRouteEtherOamCtlGroup	1.3.6.1.4.1.5567.2.56.2.2.5			The group of objects that are needed for Ethernet OAM traceRoute.
U32 rsTraceRouteEtherOamCtlPriority	1.3.6.1.4.1.5567.2.56.1.5.1.3	Unsigned32	read-create	802.1p priority value.
rsTraceRouteEtherOamCtlTable	1.3.6.1.4.1.5567.2.56.1.5		not-accessible	Extends the traceRoute Control Table for providing, via SNMP, the capability of performing trace path operations at a remote host by L2 MAC address.
MAC rsTraceRouteEtherOamCtlTargetAddress	1.3.6.1.4.1.5567.2.56.1.5.1.1	MacAddress	read-create	Specifies the host L2 MAC address to be used at a remote host for performing a traceRoute operation. A value for this object MUST be set prior to transitioning its corresponding traceRouteCtlEntry to active(1) via traceRouteCtlRowStatus. This object essentially replaces traceRouteCtlTargetAddressType and traceRouteCtrTArgetAddress in traceRouteCtrlTable.
VLA rsTraceRouteEtherOamCtlVlanId	1.3.6.1.4.1.5567.2.56.1.5.1.2	VlanIndex	read-create	Vlan in which the OAM frames will be transmitted.
rsTraceRouteEtherOamHistoryEntry	1.3.6.1.4.1.5567.2.56.1.10.1		not-accessible	Defines an entry in the rsTraceRouteEtherOamHistoryTable. All the index elements are defined in RFC2925.
rsTraceRouteEtherOamHistoryGroup	1.3.6.1.4.1.5567.2.56.2.2.10			The group of objects that are needed for Ethernet OAM traceRoute history.
STR rsTraceRouteEtherOamHistoryHInportContextId	1.3.6.1.4.1.5567.2.56.1.10.1.3	RsContextId	read-only	Indicates the Inport context ID at a hop.
OCT rsTraceRouteEtherOamHistoryHInportName	1.3.6.1.4.1.5567.2.56.1.10.1.4	OCTET STRING	read-only	Indicates the Inport Port Name at a hop
VLA rsTraceRouteEtherOamHistoryHInportVlanId	1.3.6.1.4.1.5567.2.56.1.10.1.2	VlanIndex	read-only	Indicates the Inport VlanId at a hop.
STR rsTraceRouteEtherOamHistoryHOutportContextId	1.3.6.1.4.1.5567.2.56.1.10.1.6	RsContextId	read-only	Indicates the Outport ContextId at a hop.
OCT rsTraceRouteEtherOamHistoryHOutportName	1.3.6.1.4.1.5567.2.56.1.10.1.7	OCTET STRING	read-only	Indicates the Outport Port Name at a hop
VLA rsTraceRouteEtherOamHistoryHOutportVlanId	1.3.6.1.4.1.5567.2.56.1.10.1.5	VlanIndex	read-only	Indicates the Outport VlanId at a hop.
rsTraceRouteEtherOamHistoryTable	1.3.6.1.4.1.5567.2.56.1.10		not-accessible	Extends the traceRouteProbeHistoryTable for providing, via SNMP, the capability of performing trace path operations at a remote host by L2 MAC address. Restrictions: Following objects of traceRouteProbeHistoryEntry are not used when traceRouteCtlType is of rsTraceRouteEthernetOAM. traceRouteProbeHistoryHAddrType, traceRouteProbeHistoryHAddr,
MAC rsTraceRouteEtherOamHistoryTargetAddress	1.3.6.1.4.1.5567.2.56.1.10.1.1	MacAddress	read-only	Indicates the host L2 MAC address at a hop. This object essentially replaces traceRouteProbeHistoryHAddrType and traceRouteProbeHistoryHAddr in traceRouteProbeHistoryTable.
rsTraceRouteExtensionsMIB	1.3.6.1.4.1.5567.2.56			This module extends the traceRouteMIB defined in RFC2925.
rsTraceRouteGroups	1.3.6.1.4.1.5567.2.56.2.2
STR rsTraceRouteHVplsCtlContextId	1.3.6.1.4.1.5567.2.56.1.8.1.3	RsContextId	read-create	Context Id in which the OAM frames will be transmitted.
RSD rsTraceRouteHVplsCtlDomains	1.3.6.1.4.1.5567.2.56.1.8.1.4	RsDomainList	read-create	List of domains for a HVPLS network.
rsTraceRouteHVplsCtlEntry	1.3.6.1.4.1.5567.2.56.1.8.1		not-accessible	Defines an entry in the rsTraceRouteHVplsCtlTable. The index elements traceRouteCtlOwnerIndex and traceRouteCtlTestName are defined in RFC2925.
rsTraceRouteHVplsCtlGroup	1.3.6.1.4.1.5567.2.56.2.2.8			The group of objects that are needed for (H)VPLS OAM traceRoute.
U32 rsTraceRouteHVplsCtlPriority	1.3.6.1.4.1.5567.2.56.1.8.1.5	Unsigned32	read-create	802.1p priority value.
rsTraceRouteHVplsCtlTable	1.3.6.1.4.1.5567.2.56.1.8		not-accessible	Extends the traceRoute Control Table for providing, via SNMP, the capability of performing trace path operations at a remote host by L2 MAC address over a (H)VPLS network.
MAC rsTraceRouteHVplsCtlTargetAddress	1.3.6.1.4.1.5567.2.56.1.8.1.1	MacAddress	read-create	Specifies the host L2 MAC address to be used at a remote host for performing a traceroute operation. A value for this object MUST be set prior to transitioning its corresponding traceRouteCtlEntry to active(1) via traceRouteCtlRowStatus. This object essentially replaces traceRouteCtlTargetAddressType and traceRouteCtlTargetAddress in traceRouteCtlTable.
VLA rsTraceRouteHVplsCtlVlanId	1.3.6.1.4.1.5567.2.56.1.8.1.2	VlanIndex	read-create	Vlan in which the frames will be transmitted.
MAC rsTraceRouteHVplsHopsAddress	1.3.6.1.4.1.5567.2.56.1.18.1.1	MacAddress	read-only	Indicates the host L2 MAC address at a hop. This object essentially replaces traceRouteHopsIpTgtAddressType and traceRouteHopsIpTgtAddress in traceRouteHopsTable.
rsTraceRouteHVplsHopsEntry	1.3.6.1.4.1.5567.2.56.1.18.1		not-accessible	Defines an entry in the rsTraceRouteHVplsHopsTable. All the index elements are defined in RFC2925.
rsTraceRouteHVplsHopsGroup	1.3.6.1.4.1.5567.2.56.2.2.18			The group of objects that are needed for (H)VPLS OAM traceRoute Hops.
STR rsTraceRouteHVplsHopsInportContextId	1.3.6.1.4.1.5567.2.56.1.18.1.3	RsContextId	read-only	Indicates the Inport ContextId at a hop.
OCT rsTraceRouteHVplsHopsInportName	1.3.6.1.4.1.5567.2.56.1.18.1.4	OCTET STRING	read-only	Indicates the Inport Port Name at a hop
VLA rsTraceRouteHVplsHopsInportVlanId	1.3.6.1.4.1.5567.2.56.1.18.1.2	VlanIndex	read-only	Indicates the Inport VlanId at a hop.
INT rsTraceRouteHVplsHopsMacKnown	1.3.6.1.4.1.5567.2.56.1.18.1.8	INTEGER	read-only	Indicates if the target mac address (rsTraceRouteHVplsCtlTargetAddress) is known, known on multiple vlans or not known at a hop
STR rsTraceRouteHVplsHopsNodeDescr	1.3.6.1.4.1.5567.2.56.1.18.1.11	DisplayString	read-only	The description of the node at a hop, which contains type of equipment, SW version and so on.
STR rsTraceRouteHVplsHopsNodeName	1.3.6.1.4.1.5567.2.56.1.18.1.10	DisplayString	read-only	The hostname of the node at a hop.
STR rsTraceRouteHVplsHopsOutportContextId	1.3.6.1.4.1.5567.2.56.1.18.1.6	RsContextId	read-only	Indicates the Outport Context Id at a hop.
OCT rsTraceRouteHVplsHopsOutportName	1.3.6.1.4.1.5567.2.56.1.18.1.7	OCTET STRING	read-only	Indicates the Output Port Name at a hop.
VLA rsTraceRouteHVplsHopsOutportVlanId	1.3.6.1.4.1.5567.2.56.1.18.1.5	VlanIndex	read-only	Indicates the Outport VlanId at a hop.
MAC rsTraceRouteHVplsHopsSourceMacAddr	1.3.6.1.4.1.5567.2.56.1.18.1.9	MacAddress	read-only	Indicates the source/filter mac address used at a hop.
rsTraceRouteHVplsHopsTable	1.3.6.1.4.1.5567.2.56.1.18		not-accessible	Extends the traceRouteHopsTable for providing, via SNMP, the capability of performing trace path operations at a remote host by L2 MAC address over a (H)VPLS network. Restrictions: Following objects of traceRouteHopsEntry are not used when traceRouteCtlType is of rsTraceRouteHVplsOAM. traceRouteHopsIpTgtAddressType, traceRouteHopsIpTgtAddress,
rsTraceRouteHVplsOam	1.3.6.1.4.1.5567.2.56.3.8			Indicates that an implementation is using (H)VPLS OAM to perform a traceroute operation to a remote host by L2 MAC address.
rsTraceRouteHVplsProbeHistoryEntry	1.3.6.1.4.1.5567.2.56.1.13.1		not-accessible	Defines an entry in the rsTraceRouteHVplsProbeHistoryTable. All the index elements are defined in RFC2925.
rsTraceRouteHVplsProbeHistoryGroup	1.3.6.1.4.1.5567.2.56.2.2.13			The group of objects that are needed for (H)VPLS OAM traceRoute history.
MAC rsTraceRouteHVplsProbeHistoryHAddress	1.3.6.1.4.1.5567.2.56.1.13.1.1	MacAddress	read-only	Indicates the host L2 MAC address at a hop. This object essentially replaces traceRouteProbeHistoryHAddrType and traceRouteProbeHistoryHAddr in traceRouteProbeHistoryTable.
STR rsTraceRouteHVplsProbeHistoryHInportContextId	1.3.6.1.4.1.5567.2.56.1.13.1.3	RsContextId	read-only	Indicates the Inport ContextId at a hop.
OCT rsTraceRouteHVplsProbeHistoryHInportName	1.3.6.1.4.1.5567.2.56.1.13.1.4	OCTET STRING	read-only	Indicates the Inport Port Name at a hop
VLA rsTraceRouteHVplsProbeHistoryHInportVlanId	1.3.6.1.4.1.5567.2.56.1.13.1.2	VlanIndex	read-only	Indicates the Inport VlanId at a hop.
INT rsTraceRouteHVplsProbeHistoryHMacKnown	1.3.6.1.4.1.5567.2.56.1.13.1.8	INTEGER	read-only	Indicates if the target mac address (rsTraceRouteHVplsProbeCtlTargetAddress) is known, known on multiple vlans or not known at a hop
STR rsTraceRouteHVplsProbeHistoryHNodeDescr	1.3.6.1.4.1.5567.2.56.1.13.1.11	DisplayString	read-only	The description of the node at a hop, which contains type of equipment, SW version and so on.
STR rsTraceRouteHVplsProbeHistoryHNodeName	1.3.6.1.4.1.5567.2.56.1.13.1.10	DisplayString	read-only	The hostname of the node at a hop.
STR rsTraceRouteHVplsProbeHistoryHOutportContextId	1.3.6.1.4.1.5567.2.56.1.13.1.6	RsContextId	read-only	Indicates the Outport ContextId at a hop.
OCT rsTraceRouteHVplsProbeHistoryHOutportName	1.3.6.1.4.1.5567.2.56.1.13.1.7	OCTET STRING	read-only	Indicates the Outport Port Name at a hop
VLA rsTraceRouteHVplsProbeHistoryHOutportVlanId	1.3.6.1.4.1.5567.2.56.1.13.1.5	VlanIndex	read-only	Indicates the Outport VlanId at a hop.
MAC rsTraceRouteHVplsProbeHistoryHSourceMacAddr	1.3.6.1.4.1.5567.2.56.1.13.1.9	MacAddress	read-only	Indicates the source/filter mac address used at a hop.
rsTraceRouteHVplsProbeHistoryTable	1.3.6.1.4.1.5567.2.56.1.13		not-accessible	Extends the traceRouteProbeHistoryTable for providing, via SNMP, the capability of performing trace path operations at a remote host by L2 MAC address over a (H)VPLS network. Restrictions: Following objects of traceRouteProbeHistoryEntry are not used when traceRouteCtlType is of rsTraceRouteHVplsOAM. traceRouteProbeHistoryHAddrType, traceRouteProbeHistoryHAddr,
rsTraceRouteLspLdpCtlEntry	1.3.6.1.4.1.5567.2.56.1.6.1		not-accessible	Defines an entry in the rsTraceRouteLspLdpCtlTable. The index elements traceRouteCtlOwnerIndex and traceRouteCtlTestName are defined in RFC2925.
rsTraceRouteLspLdpCtlGroup	1.3.6.1.4.1.5567.2.56.2.2.6			The group of objects that are needed for LSP LDP OAM traceRoute.
rsTraceRouteLspLdpCtlTable	1.3.6.1.4.1.5567.2.56.1.6		not-accessible	Extends the traceRoute Control Table for providing, via SNMP, the capability of performing trace path operations at a remote host by using LSP-LDP FEC.
U32 rsTraceRouteLspLdpCtlTgtMaskLen	1.3.6.1.4.1.5567.2.56.1.6.1.1	Unsigned32	read-create	Specifies the host mask in number of consecutive bits to be used at a remote host for performing a traceroute operation. A value for this object MUST be set prior to transitioning its corresponding traceRouteCtlEntry to active(1) via traceRouteCtlRowStatus.
rsTraceRouteLspLdpOam	1.3.6.1.4.1.5567.2.56.3.6			Indicates that an implementation is using LSP LDP OAM to perform the traceroute operation to a remote host by LSP-LDP FEC.
rsTraceRouteLspRsvpCtlEntry	1.3.6.1.4.1.5567.2.56.1.7.1		not-accessible	Defines an entry in the rsTraceRouteLspRsvpCtlTable. The index elements traceRouteCtlOwnerIndex and traceRouteCtlTestName are defined in RFC2925.
rsTraceRouteLspRsvpCtlGroup	1.3.6.1.4.1.5567.2.56.2.2.7			The group of objects that are needed for LSP RSVP OAM traceRoute.
rsTraceRouteLspRsvpCtlTable	1.3.6.1.4.1.5567.2.56.1.7		not-accessible	Extends the traceRoute Control Table for providing, via SNMP, the capability of performing trace path operations at a remote host by using LSP-RSVP Tunnel Id.
MPL rsTraceRouteLspRsvpCtlTgtTunnelId	1.3.6.1.4.1.5567.2.56.1.7.1.1	MplsTunnelIndex	read-create	Specifies the target tunnel Id to be used at a remote host for performing a trace route operation. This object essentially replaces traceRouteCtlTargetAddressType and traceRouteCtlTargetAddress in traceRouteCtlTable.
rsTraceRouteLspRsvpOam	1.3.6.1.4.1.5567.2.56.3.7			Indicates that an implementation is using LSP RSVP OAM to perform a traceroute operation to a remote host by LSP-RSVP Tunnel ID.
rsTraceRouteObjects	1.3.6.1.4.1.5567.2.56.1
rsTraceRouteTypes	1.3.6.1.4.1.5567.2.56.3

RFC description

Extends traceroute operations for Riverstone devices including MPLS LSP, VPLS, and Ethernet OAM testing.

Start monitoring Riverstone Networks routers/switches running MPLS or Ethernet OAM (extended traceroute diagnostics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB

What Is RIVERSTONE-TRACEROUTE-EXTENSIONS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description