REDLINE-AN80I-IF-MIB

All MIBs › REDLINE-AN80I-IF-MIB

Organization: Redline Communications Inc.

Last Updated: 2005-11-28

Category: Wireless and Radio

Description: Manages radio interface configuration and link statistics for Redline Communications AN80i point-to-point microwave systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is REDLINE-AN80I-IF-MIB?

REDLINE-AN80I-IF-MIB is a vendor-specific MIB from Redline Communications covering the radio interface of the AN80i, a point-to-point microwave wireless backhaul system. It exposes configuration and status objects for the wireless link itself, including modulation, encryption, burst rate, retransmission control, and link-length/distance parameters, as well as real-time link status. Its monitoring value is centered on radio link health: administrators can check adaptive modulation state, current uncoded burst rate, and point-to-point link status to detect a degraded or down microwave link, which is the software/hardware operational state equivalent for this type of radio equipment. It supplements Redline's broader AN80i MIB set and standard interface MIBs (IF-MIB) that provide generic interface counters and admin/oper status. It is deployed on point-to-point wireless backhaul links, such as tower-to-tower or building-to-building microwave connections used by carriers and enterprises. Engineers can download the REDLINE-AN80I-IF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in REDLINE-AN80I-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Redline AN80i point-to-point microwave radio

Monitoring Examples

An administrator would poll an80iIfPtpLinkStatus to confirm the microwave link is up, and check an80iIfCurrUncodedBurstRate against an80iIfUncodedBurstRate to see whether adaptive modulation (an80iIfAdaptiveMod) has downshifted the link due to weather or interference. Values for an80iIfLinkLength and an80iIfCalcLinkDst help validate that the configured link distance matches the calculated one, while an80iIfEncryptionControl and an80iIfEncryptionKey confirm the link's security posture. A drop in burst rate combined with a link status change would indicate a fading or failing microwave path.

What Can Be Monitored

point-to-point link status
current uncoded burst rate
adaptive modulation state
link length/distance
encryption configuration
packet retransmission control

Imported Objects

From REDLINE-MIB

redlineTransmission

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

How to Use in IPNetwork Monitor

Example using an80iIfRxPackets OID:

Select a Redline AN80i point-to-point microwave radio (radio interface modulation/link status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type an80iIfRxPackets into the Find box to locate it in the OID tree, then select it and click OK. Indicates the number of received wireless packets with a correct CRC. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT an80iIfAdaptiveMod	1.3.6.1.4.1.10728.2.10.2.1.1.3	INTEGER	read-write	If enabled, the system automatically adjust the modulation to obtain the maximum throughput.
I32 an80iIfAvrSinAdr	1.3.6.1.4.1.10728.2.10.2.1.2.12	Integer32	read-only	Indicates the Signal to interference, noise and distortion ratio.
I32 an80iIfCalcLinkDst	1.3.6.1.4.1.10728.2.10.2.1.1.9	Integer32	read-only	The calculated link distance [Km].
U32 an80iIfCurrUncodedBurstRate	1.3.6.1.4.1.10728.2.10.2.1.2.1	Unsigned32	read-only	Indicates the index of the link uncoded burst rate. With adaptive modulation enabled, this rate may change over time.
MAC an80iIfDenyMacAddress	1.3.6.1.4.1.10728.2.10.2.2.1.3	MacAddress	read-write	MAC address for the SS that will be denied by this SC
INT an80iIfEncryptionControl	1.3.6.1.4.1.10728.2.10.2.1.1.1	INTEGER	read-write	Specifies if encryption type.
OCT an80iIfEncryptionKey	1.3.6.1.4.1.10728.2.10.2.1.1.5	OCTET STRING	read-write	The Encryption Key used for the AN-80i. Enter the MAC address of the peer equipment to enable over-the-air data encryption.
MAC an80iIfLastMissedMacAddress	1.3.6.1.4.1.10728.2.10.2.2.1.1	MacAddress	read-only	MAC address for the last SS that attempted to register but it was not present in the 'Links' table
INT an80iIfLastRegistLinkId	1.3.6.1.4.1.10728.2.10.2.2.1.4	INTEGER	read-only	The link ID for the last SS that successfully registered
MAC an80iIfLastRegistMacAddress	1.3.6.1.4.1.10728.2.10.2.2.1.2	MacAddress	read-only	MAC address for the last SS that successfuly registered
I32 an80iIfLinkLength	1.3.6.1.4.1.10728.2.10.2.1.1.8	Integer32	read-write	User supplied PTP Link Length [Km].
INT an80iIfLinkLenMode	1.3.6.1.4.1.10728.2.10.2.1.1.7	INTEGER	read-write	In manual mode the system uses the user-supplied value for link length. In the auto mode the system calculate itself the distance, which can be read using 'calculated distance'.
STR an80iIfLinkName	1.3.6.1.4.1.10728.2.10.2.1.1.10	DisplayString	read-write	Link Name.
INT an80iIfModReduction	1.3.6.1.4.1.10728.2.10.2.1.1.2	INTEGER	read-write	Applies when the adaptive rate is disabled, and specifies how many levels the system must drop in modulation before beginning retransmission to address packet errors.
INT an80iIfPacketRetransControl	1.3.6.1.4.1.10728.2.10.2.1.1.6	INTEGER	read-write	Enables/disables packet retransmission. The retransmission scheme is based on the Acknowledge /Request (ARQ) algorithm that detects when packets are lost and makes a request to the MAC scheduler to repeat transmission of the lost packets.
an80iIfPmpConnConfigEntry	1.3.6.1.4.1.10728.2.10.2.2.6.1		not-accessible	This table provides one row for each connection defined in the Service Controller
ROW an80iIfPmpConnConfigStatus	1.3.6.1.4.1.10728.2.10.2.2.6.1.10	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table.
an80iIfPmpConnConfigTable	1.3.6.1.4.1.10728.2.10.2.2.6		not-accessible	This table contains connections configuration information. One connection defines the transport parameter for Ethernet packets that have specific properties.
INT an80iIfPmpConnDefParenGroup	1.3.6.1.4.1.10728.2.10.2.2.6.1.7	INTEGER	read-create	This object specifies the parent group of the connection.
INT an80iIfPmpConnDefParentLink	1.3.6.1.4.1.10728.2.10.2.2.6.1.6	INTEGER	read-create	This object specifies the parent link of the connection.
INT an80iIfPmpConnDefPriority	1.3.6.1.4.1.10728.2.10.2.2.6.1.5	INTEGER	read-create	This field is used every time a tag is added at the exit point. The priority will be the one specified at the entry point.
C64 an80iIfPmpConnDLPacketsDisc	1.3.6.1.4.1.10728.2.10.2.2.7.1.3	Counter64	read-only	Indicates packets discarded due to full buffer.
C64 an80iIfPmpConnDLPacketsRx	1.3.6.1.4.1.10728.2.10.2.2.7.1.2	Counter64	read-only	Indicates Ethernet packets receivedby SS.
C64 an80iIfPmpConnDLPacketsTx	1.3.6.1.4.1.10728.2.10.2.2.7.1.1	Counter64	read-only	Indicates Ethernet packets sent by SC.
INT an80iIfPmpConnDLQos	1.3.6.1.4.1.10728.2.10.2.2.6.1.8	INTEGER	read-create	Connection QoS level (index) that will affect the DL bandwidth and the delay.
INT an80iIfPmpConnId	1.3.6.1.4.1.10728.2.10.2.2.6.1.1	INTEGER	not-accessible	The PMP Conn Identifier.
STR an80iIfPmpConnName	1.3.6.1.4.1.10728.2.10.2.2.6.1.2	DisplayString	read-create	The PMP Conn Name.
an80iIfPmpConnStatsEntry	1.3.6.1.4.1.10728.2.10.2.2.7.1		not-accessible	This table provides one row for each connection defined in the Service Controller
ROW an80iIfPmpConnStatsStatus	1.3.6.1.4.1.10728.2.10.2.2.7.1.7	RowStatus	read-only	This object is used to create a new row or modify or delete an existing row in this table.
an80iIfPmpConnStatsTable	1.3.6.1.4.1.10728.2.10.2.2.7		not-accessible	This table contains connections configuration information. One connection defines the transport parameter for Ethernet packets that have specific properties.
INT an80iIfPmpConnTaggingControl	1.3.6.1.4.1.10728.2.10.2.2.6.1.3	INTEGER	read-create	Specifies tagging mode. Only one pass-through connection can be defined on each link. This is the default connection. All the untagged packets or with a VID that is not defined will be transmitted on this connection.
C64 an80iIfPmpConnULPacketsDisc	1.3.6.1.4.1.10728.2.10.2.2.7.1.6	Counter64	read-only	Indicates packets discarded due to full buffer.
C64 an80iIfPmpConnULPacketsRx	1.3.6.1.4.1.10728.2.10.2.2.7.1.5	Counter64	read-only	Indicates Ethernet packets received SC.
C64 an80iIfPmpConnULPacketsTx	1.3.6.1.4.1.10728.2.10.2.2.7.1.4	Counter64	read-only	Indicates Ethernet packets sent by SS.
INT an80iIfPmpConnULQos	1.3.6.1.4.1.10728.2.10.2.2.6.1.9	INTEGER	read-create	Connection QoS level (index) that will affect the UL bandwidth and the delay.
INT an80iIfPmpConnVlanId	1.3.6.1.4.1.10728.2.10.2.2.6.1.4	INTEGER	read-create	Specifies VLAN Id for the tagged mode.
an80iIfPmpGroupConfigEntry	1.3.6.1.4.1.10728.2.10.2.2.4.1		not-accessible	This table provides one row for each group defined in the Service Controller
ROW an80iIfPmpGroupConfigStatus	1.3.6.1.4.1.10728.2.10.2.2.4.1.8	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table.
an80iIfPmpGroupConfigTable	1.3.6.1.4.1.10728.2.10.2.2.4		not-accessible	This table contains group configuration information. The group defined as a broadcast domain.
INT an80iIfPmpGroupDefPriority	1.3.6.1.4.1.10728.2.10.2.2.4.1.5	INTEGER	read-create	This field is used every time a tag is added at the exit point. The priority will be the one specified at the entry point.
INT an80iIfPmpGroupId	1.3.6.1.4.1.10728.2.10.2.2.4.1.1	INTEGER	not-accessible	The PMP Group Identifier.
STR an80iIfPmpGroupName	1.3.6.1.4.1.10728.2.10.2.2.4.1.2	DisplayString	read-create	The PMP Group Name.
C64 an80iIfPmpGroupPacketDisc	1.3.6.1.4.1.10728.2.10.2.2.5.1.2	Counter64	read-only	Ethernet packets classified to be sent to the group but discarded due to unavailable memory.
C64 an80iIfPmpGroupPacketsTx	1.3.6.1.4.1.10728.2.10.2.2.5.1.1	Counter64	read-only	Broadcast/multicast Ethernet packets classified and transmitted to the group.
INT an80iIfPmpGroupQosLevel	1.3.6.1.4.1.10728.2.10.2.2.4.1.7	INTEGER	read-create	QoS level (index) that will affect the bandwidth and the delay for this group.
INT an80iIfPmpGroupRate	1.3.6.1.4.1.10728.2.10.2.2.4.1.9	INTEGER	read-create	Define the index of the group rate. (0..7, 8=auto)
INT an80iIfPmpGroupSCEtherControl	1.3.6.1.4.1.10728.2.10.2.2.4.1.6	INTEGER	read-create	Makes the Sector Controller a member of the group.
INT an80iIfPmpGroupSStoSSMulticast	1.3.6.1.4.1.10728.2.10.2.2.4.1.10	INTEGER	read-create	Enable the Subscriber to subscriber multicast traffic.
an80iIfPmpGroupStatsEntry	1.3.6.1.4.1.10728.2.10.2.2.5.1		not-accessible	This table provides one row for each group defined in the Service Controller
ROW an80iIfPmpGroupStatsStatus	1.3.6.1.4.1.10728.2.10.2.2.5.1.3	RowStatus	read-only	This object is used to create a new row or modify or delete an existing row in this table.
an80iIfPmpGroupStatsTable	1.3.6.1.4.1.10728.2.10.2.2.5		not-accessible	This table contains group statistics information. The group defined as a broadcast domain.
INT an80iIfPmpGroupTaggingControl	1.3.6.1.4.1.10728.2.10.2.2.4.1.3	INTEGER	read-create	Specifies tagging mode.Only one pass-through group can exist. This is the default group. In the pass-through mode all the Ethernet packets that do not have a VLAN tag or an undefined VID will be classified in this group.
INT an80iIfPmpGroupVlanId	1.3.6.1.4.1.10728.2.10.2.2.4.1.4	INTEGER	read-create	In the tagged mode all Ethernet packets that have this VID will be classified to belong to this group.
an80iIfPmpLinkConfigEntry	1.3.6.1.4.1.10728.2.10.2.2.2.1		not-accessible	This table provides one row for each PMP link that has been configured in the SC.
ROW an80iIfPmpLinkConfigStatus	1.3.6.1.4.1.10728.2.10.2.2.2.1.6	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table.
an80iIfPmpLinkConfigTable	1.3.6.1.4.1.10728.2.10.2.2.2		not-accessible	This table contains the PMP link configuration information.
U32 an80iIfPmpLinkCurrDLUncBurstRate	1.3.6.1.4.1.10728.2.10.2.2.3.1.6	Unsigned32	read-only	Indicates the index of the link's downlink actual uncoded burst rate.
U32 an80iIfPmpLinkCurrULUncBurstRate	1.3.6.1.4.1.10728.2.10.2.2.3.1.13	Unsigned32	read-only	Indicates the index of the link's uplink actual uncoded burst rate.
C64 an80iIfPmpLinkDLBlksDisc	1.3.6.1.4.1.10728.2.10.2.2.3.1.12	Counter64	read-only	Indicates the link's DL blocks lost
C64 an80iIfPmpLinkDLBlksRetr	1.3.6.1.4.1.10728.2.10.2.2.3.1.11	Counter64	read-only	Indicates the link's DL block re-transmitted.
C64 an80iIfPmpLinkDLBlksTot	1.3.6.1.4.1.10728.2.10.2.2.3.1.10	Counter64	read-only	Indicates the link's DL blocks transmitted.
U32 an80iIfPmpLinkDLBurstRate	1.3.6.1.4.1.10728.2.10.2.2.2.1.5	Unsigned32	read-create	User supplied index of the downlink uncoded burst rate.
C64 an80iIfPmpLinkDLLostFrm	1.3.6.1.4.1.10728.2.10.2.2.3.1.9	Counter64	read-only	Indicates the link's DL lost frames.
I32 an80iIfPmpLinkDLRssi	1.3.6.1.4.1.10728.2.10.2.2.3.1.7	Integer32	read-only	Indicates the link's DL RSSI (Received Signal Strength Indicator).
I32 an80iIfPmpLinkDLSinAdr	1.3.6.1.4.1.10728.2.10.2.2.3.1.8	Integer32	read-only	Indicates the link's DL SINADR (Signal Interference and Noise Distorsion Ratio).
INT an80iIfPmpLinkId	1.3.6.1.4.1.10728.2.10.2.2.2.1.1	INTEGER	not-accessible	The PMP Link Identifier.
C32 an80iIfPmpLinkLostCount	1.3.6.1.4.1.10728.2.10.2.2.3.1.5	Counter32	read-only	Number of times the link has been lost since the system started.
STR an80iIfPmpLinkName	1.3.6.1.4.1.10728.2.10.2.2.2.1.2	DisplayString	read-create	The PMP Link Name.
MAC an80iIfPmpLinkPeerMacAddress	1.3.6.1.4.1.10728.2.10.2.2.2.1.3	MacAddress	read-create	The MAC address for the peer SS
an80iIfPmpLinkStatsEntry	1.3.6.1.4.1.10728.2.10.2.2.3.1		not-accessible	This table provides one row for each PMP link that has been configured in the Service Controller.
ROW an80iIfPmpLinkStatsStatus	1.3.6.1.4.1.10728.2.10.2.2.3.1.20	RowStatus	read-only	This object is used to create a new row or modify or delete an existing row in this table.
an80iIfPmpLinkStatsTable	1.3.6.1.4.1.10728.2.10.2.2.3		not-accessible	This table contains the PMP link statistics information.
INT an80iIfPmpLinkStatus	1.3.6.1.4.1.10728.2.10.2.2.3.1.1	INTEGER	read-only	Indicates if the link has been established/not established.
I32 an80iIfPmpLinkStatusCode	1.3.6.1.4.1.10728.2.10.2.2.3.1.2	Integer32	read-only	Indicates the error code for the link.
C64 an80iIfPmpLinkULBlksDisc	1.3.6.1.4.1.10728.2.10.2.2.3.1.19	Counter64	read-only	Indicates the link's UL blocks lost
C64 an80iIfPmpLinkULBlksRetr	1.3.6.1.4.1.10728.2.10.2.2.3.1.18	Counter64	read-only	Indicates the link's UL block re-transmitted.
C64 an80iIfPmpLinkULBlksTot	1.3.6.1.4.1.10728.2.10.2.2.3.1.17	Counter64	read-only	Indicates the link's UL blocks transmitted.
U32 an80iIfPmpLinkULBurstRate	1.3.6.1.4.1.10728.2.10.2.2.2.1.4	Unsigned32	read-create	User supplied index of the uplink uncoded burst rate.
C64 an80iIfPmpLinkULLostFrm	1.3.6.1.4.1.10728.2.10.2.2.3.1.16	Counter64	read-only	Indicates the link's UL lost frames.
I32 an80iIfPmpLinkULRssi	1.3.6.1.4.1.10728.2.10.2.2.3.1.14	Integer32	read-only	Indicates the link's UL RSSI (Received Signal Strength Indicator).
I32 an80iIfPmpLinkULSinAdr	1.3.6.1.4.1.10728.2.10.2.2.3.1.15	Integer32	read-only	Indicates the link's UL SINADR (Signal Interference and Noise Distorsion Ratio).
TIK an80iIfPmpLinkUpTime	1.3.6.1.4.1.10728.2.10.2.2.3.1.4	TimeTicks	read-only	The time (in hundredths of a second) elapsed since the link was established (up) last time.
INT an80iIfPtpLinkStatus	1.3.6.1.4.1.10728.2.10.2.1.2.2	INTEGER	read-only	Indicates if the link has been established/not established.
NTF an80iIfRegistrationFailedTrap	1.3.6.1.4.1.10728.2.10.2.0.1			Event that reports the failure of a registration attempt of a SS that is not defined in the link table.
NTF an80iIfRegistrationOKTrap	1.3.6.1.4.1.10728.2.10.2.0.2			An event to report the successful SS registration.
I32 an80iIfRegPmpLinkConns	1.3.6.1.4.1.10728.2.10.2.2.3.1.3	Integer32	read-only	Indicates the registered connections for this Link.
I32 an80iIfRssiMax	1.3.6.1.4.1.10728.2.10.2.1.2.11	Integer32	read-only	Indicates the maximum received signal strength for the measuring interval.
I32 an80iIfRssiMean	1.3.6.1.4.1.10728.2.10.2.1.2.10	Integer32	read-only	Indicates the average received signal strength for the measuring interval.
I32 an80iIfRssiMin	1.3.6.1.4.1.10728.2.10.2.1.2.9	Integer32	read-only	Indicates the minimum received signal strength for the measuring interval.
C64 an80iIfRxPacketsEx	1.3.6.1.4.1.10728.2.10.2.1.2.3	Counter64	read-only	Indicates the number of received wireless packets with a correct CRC.
C64 an80iIfRxPacketsDisc	1.3.6.1.4.1.10728.2.10.2.1.2.5	Counter64	read-only	Indicates the number of received retransmitted wireless packets with bad CRC.
C64 an80iIfRxPacketsReTx	1.3.6.1.4.1.10728.2.10.2.1.2.4	Counter64	read-only	Indicates the number of received retransmitted wireless packets with a correct CRC.
C64 an80iIfTxPackets	1.3.6.1.4.1.10728.2.10.2.1.2.6	Counter64	read-only	Indicates the number of transmitted packets that were received correctly by the other equipment.
C64 an80iIfTxPacketsDisc	1.3.6.1.4.1.10728.2.10.2.1.2.8	Counter64	read-only	Indicates the number of retransmitted wireless packets that were not received correctly by the other equipment
C64 an80iIfTxPacketsReTx	1.3.6.1.4.1.10728.2.10.2.1.2.7	Counter64	read-only	Indicates the number of retransmitted wireless packets received correctly by the other equipment.
INT an80iIfUncodedBurstRate	1.3.6.1.4.1.10728.2.10.2.1.1.4	INTEGER	read-write	The maximum index of the link uncoded burst rate. The rate also depends on the channel width. The possible values are 0..7.
redlineAn80iIfCompliance	1.3.6.1.4.1.10728.2.10.2.4.2.1			The compliance statement for SNMP entities that implement this MIB module.
redlineAn80iIfCompls	1.3.6.1.4.1.10728.2.10.2.4.2
redlineAn80iIfConformance	1.3.6.1.4.1.10728.2.10.2.4
redlineAn80iIfGroups	1.3.6.1.4.1.10728.2.10.2.4.1
redlineAn80iIfMib	1.3.6.1.4.1.10728.2.10.2			This MIB module contains object definitions applicable only to Redline AN80i module.
redlineAn80iIfNotificationGroup	1.3.6.1.4.1.10728.2.10.2.4.1.3			The notifications which indicate specific events within the AN80i interface.
redlineAn80iIfPmpGroup	1.3.6.1.4.1.10728.2.10.2.4.1.2			Point to multipoint link objects.
redlineAn80iIfPmpObjects	1.3.6.1.4.1.10728.2.10.2.2
redlineAn80iIfPmpSsObjects	1.3.6.1.4.1.10728.2.10.2.2.1
redlineAn80iIfPtpGroup	1.3.6.1.4.1.10728.2.10.2.4.1.1			Point to point link objects.
redlineAn80iIfPtpLinkConfig	1.3.6.1.4.1.10728.2.10.2.1.1
redlineAn80iIfPtpLinkStats	1.3.6.1.4.1.10728.2.10.2.1.2
redlineAn80iIfPtpObjects	1.3.6.1.4.1.10728.2.10.2.1
redlineAn80iIfTrapDefinitions	1.3.6.1.4.1.10728.2.10.2.0

RFC description

Manages Redline AN80i module interface configuration, encryption modes, and link parameters.

Start monitoring Redline AN80i point-to-point microwave radio (radio interface modulation/link status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download REDLINE-AN80I-IF-MIB