All MIBs › REDLINE-AN80I-IF-MIB › an80iIfUncodedBurstRate
an80iIfUncodedBurstRate
Module: REDLINE-AN80I-IF-MIB
OID (symbolic): REDLINE-AN80I-IF-MIB::an80iIfUncodedBurstRate
OID (numeric): 1.3.6.1.4.1.10728.2.10.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The maximum index of the link uncoded burst rate. The rate also depends on the channel width. The possible values are 0..7.
What is an80iIfUncodedBurstRate?
Sets the maximum uncoded burst rate index (0-7) this link can use; the actual throughput this maps to also depends on the configured channel width. Admins raise this ceiling when they want to permit higher-order modulation on a link with good enough signal quality to support it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10728.2.10.2.1.1.4 snmpwalk -v2c -c public <target> REDLINE-AN80I-IF-MIB::an80iIfUncodedBurstRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10728.2.10.2.1.1.4.1 snmpget -v2c -c public <target> REDLINE-AN80I-IF-MIB::an80iIfUncodedBurstRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10728.2.10.2.1.1.4.1 i <value>
Start monitoring Redline AN80i point-to-point microwave radio (radio interface modulation/link status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDLINE-AN80I-IF-MIB::an80iIfUncodedBurstRate OID value, configure state conditions and alerts, and monitor any Redline AN80i point-to-point microwave radio (radio interface modulation/link status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.10728 | redline | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2 | redlineMgmt | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2.10 | redlineTransmission | REDLINE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10728.2.10.2 | redlineAn80iIfMib | REDLINE-AN80I-IF-MIB |
| 1.3.6.1.4.1.10728.2.10.2.1 | redlineAn80iIfPtpObjects | REDLINE-AN80I-IF-MIB |
| 1.3.6.1.4.1.10728.2.10.2.1.1 | redlineAn80iIfPtpLinkConfig | REDLINE-AN80I-IF-MIB |
| 1.3.6.1.4.1.10728.2.10.2.1.1.4 | an80iIfUncodedBurstRate | REDLINE-AN80I-IF-MIB |