All MIBs › REDLINE-AN80I-IF-MIB › an80iIfLinkLength
an80iIfLinkLength
Module: REDLINE-AN80I-IF-MIB
OID (symbolic): REDLINE-AN80I-IF-MIB::an80iIfLinkLength
OID (numeric): 1.3.6.1.4.1.10728.2.10.2.1.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: User supplied PTP Link Length [Km].
What is an80iIfLinkLength?
Sets the user-supplied point-to-point link length in kilometers, used when an80iIfLinkLenMode is set to manual. Admins enter the known physical distance between the two radios here so the link's timing parameters are configured correctly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10728.2.10.2.1.1.8 snmpwalk -v2c -c public <target> REDLINE-AN80I-IF-MIB::an80iIfLinkLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10728.2.10.2.1.1.8.1 snmpget -v2c -c public <target> REDLINE-AN80I-IF-MIB::an80iIfLinkLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10728.2.10.2.1.1.8.1 i <value>
Start monitoring Redline AN80i point-to-point microwave radio (radio interface modulation/link status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDLINE-AN80I-IF-MIB::an80iIfLinkLength OID value, configure state conditions and alerts, and monitor any Redline AN80i point-to-point microwave radio (radio interface modulation/link status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.10728 | redline | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2 | redlineMgmt | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2.10 | redlineTransmission | REDLINE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10728.2.10.2 | redlineAn80iIfMib | REDLINE-AN80I-IF-MIB |
| 1.3.6.1.4.1.10728.2.10.2.1 | redlineAn80iIfPtpObjects | REDLINE-AN80I-IF-MIB |
| 1.3.6.1.4.1.10728.2.10.2.1.1 | redlineAn80iIfPtpLinkConfig | REDLINE-AN80I-IF-MIB |
| 1.3.6.1.4.1.10728.2.10.2.1.1.8 | an80iIfLinkLength | REDLINE-AN80I-IF-MIB |