PT-RADIOLINK-MIB

All MIBs › PT-RADIOLINK-MIB

Organization: Ericsson

Last Updated: 2017-12-01

Category: Wireless and Radio

Description: Manages Ericsson MINI-LINK microwave radio link configuration, modulation settings, and received signal level statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PT-RADIOLINK-MIB?

PT-RADIOLINK-MIB is a vendor-specific MIB from Ericsson for the MINI-LINK family of microwave point-to-point radio link transmission equipment, part of the broader Ericsson 'PT' management platform for transport network elements. It exposes configuration data for radio link parameters such as modulation scheme along with performance data collected via ITU-T G.826 error-performance tables covering both continuous and rolling 15-minute and 24-hour intervals. Its main monitoring value is tracking radio link signal quality and transmission performance over time — received signal level and error-second/error-block counts that reveal degrading microwave paths due to weather, misalignment, or hardware aging — functioning as a performance/fault indicator for this wireless transport hardware. It builds on the ITU-T G.826 error performance standard for digital transmission paths, adapting it to Ericsson's proprietary radio link object model. It is typically deployed in mobile backhaul and fixed microwave transport networks where MINI-LINK radios connect base stations or aggregation sites. Network engineers evaluating or troubleshooting this functionality can download the PT-RADIOLINK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PT-RADIOLINK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson MINI-LINK microwave radio link equipment

Monitoring Examples

An operator monitoring microwave backhaul health would poll ctG826Current15mTable and ctG826Current24hTable to track rolling error statistics such as errored seconds over the current 15-minute and 24-hour windows, while ctG826ContinuousTable provides a running long-term counter. A sudden spike in error counts in the 15-minute table combined with a falling received signal level would indicate a microwave path degrading from weather fade, antenna misalignment, or a failing radio unit, prompting field dispatch before the link drops entirely.

What Can Be Monitored

received signal level
modulation configuration
G.826 errored seconds (continuous)
G.826 errored seconds (15-minute interval)
G.826 errored seconds (24-hour interval)

Imported Objects

From IF-MIB

ifEntry

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddressIPv6

From PT-MIB

pt	MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
ptRadioLink	1.3.6.1.4.1.193.223.2.7			This is the MIB for Radio Link specifics in PT
ctTable	1.3.6.1.4.1.193.223.2.7.1		not-accessible	A table of CT Table entries.
ctEntry	1.3.6.1.4.1.193.223.2.7.1.1		not-accessible	An entry of CT application.
OCT actualInputPower	1.3.6.1.4.1.193.223.2.7.1.1.1	OCTET STRING	read-only	Actual input power of the CT in dBm
OCT actualOutputPower	1.3.6.1.4.1.193.223.2.7.1.1.2	OCTET STRING	read-only	Actual output power of the CT in dBm
OCT actualRxAcm	1.3.6.1.4.1.193.223.2.7.1.1.3	OCTET STRING	read-only	Actual rx modulation and coding
OCT actualTxAcm	1.3.6.1.4.1.193.223.2.7.1.1.4	OCTET STRING	read-only	Actual tx modulation and coding
OCT ctDistinguishedName	1.3.6.1.4.1.193.223.2.7.1.1.5	OCTET STRING	read-only	Unique id/name of the carrier termination, according to FDN (rack/slot/port/class)
OCT description	1.3.6.1.4.1.193.223.2.7.1.1.6	OCTET STRING	read-write	User description of the carrior termination.
INT carrierId	1.3.6.1.4.1.193.223.2.7.1.1.7	INTEGER	read-write	Id of the carrier. (A, B, C, D) Used in XPIC & MIMO configurations to check that the carrier termination is connected to the correct far end carrier termination. Should be the same id on both sides of the hop. Defaulted when not MIMO or XPIC. Sometimes also referred to as preamble
INT ctStatus	1.3.6.1.4.1.193.223.2.7.1.1.8	INTEGER	read-only	The status of the carrier termination, hop
I32 frameId	1.3.6.1.4.1.193.223.2.7.1.1.9	Integer32	read-write	A unique identifier for the radio frame to be used. Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination.
I32 txFrequency	1.3.6.1.4.1.193.223.2.7.1.1.10	Integer32	read-write	Selected frequency on the transmitter (kHz). Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination.
I32 minTxFrequency	1.3.6.1.4.1.193.223.2.7.1.1.11	Integer32	read-only	Minimum Tx frequency possible to use, given by the selected frame-id
I32 maxTxFrequency	1.3.6.1.4.1.193.223.2.7.1.1.12	Integer32	read-only	Maximum Tx frequency possible to use, given by the selected frame-id
I32 rxFrequency	1.3.6.1.4.1.193.223.2.7.1.1.13	Integer32	read-write	Selected frequency on the receiver (kHz). Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination.
I32 minRxFrequency	1.3.6.1.4.1.193.223.2.7.1.1.14	Integer32	read-only	Minimum Rx frequency possible to use, given by the selected frame-id
I32 maxRxFrequency	1.3.6.1.4.1.193.223.2.7.1.1.15	Integer32	read-only	Maximum Rx frequency possible to use, given by the selected frame-id
I32 frequencyStepSize	1.3.6.1.4.1.193.223.2.7.1.1.16	Integer32	read-only	Frequency step size in kHz
I32 duplexDistance	1.3.6.1.4.1.193.223.2.7.1.1.17	Integer32	read-only	Distance between Tx and Rx frequencies (kHz)
INT duplexType	1.3.6.1.4.1.193.223.2.7.1.1.18	INTEGER	read-only	The duplex type is given by the equipment (Fixed,Variable)
ENA duplexConfig	1.3.6.1.4.1.193.223.2.7.1.1.19	EnableStatusTC	read-write	Enabling or disabling configuration of Rx freq using duplex distance
INT autoFreqSelection	1.3.6.1.4.1.193.223.2.7.1.1.20	INTEGER	read-write	Automatic frequency selection mode
I32 autoFreqSelectedChannel	1.3.6.1.4.1.193.223.2.7.1.1.21	Integer32	read-write	Automatic frequency selected channel
INT autoFreqSelectionStatus	1.3.6.1.4.1.193.223.2.7.1.1.22	INTEGER	read-only	Automatic frequency status
INT channelSpacing	1.3.6.1.4.1.193.223.2.7.1.1.23	INTEGER	read-only	Channel spacing
INT polarization	1.3.6.1.4.1.193.223.2.7.1.1.24	INTEGER	read-write	Antenna polarization
INT txOperStatus	1.3.6.1.4.1.193.223.2.7.1.1.25	INTEGER	read-only	Operative status of the transmitter
INT txAdminStatus	1.3.6.1.4.1.193.223.2.7.1.1.26	INTEGER	read-write	Administrative status of the transmitter
INT selectedOutputPowerType	1.3.6.1.4.1.193.223.2.7.1.1.27	INTEGER	read-write	Selected output power type
INT availableOutputPowerType	1.3.6.1.4.1.193.223.2.7.1.1.28	INTEGER	read-write	Available output power type
I32 selectedMinOutputPower	1.3.6.1.4.1.193.223.2.7.1.1.29	Integer32	read-write	Selected min output power. Selected min & max output power should be set to the same value for RTPC mode, otherwise the hop operates in ATPC mode.
I32 selectedMaxOutputPower	1.3.6.1.4.1.193.223.2.7.1.1.30	Integer32	read-write	Selected max output power. Selected min & max output power should be set to the same value for RTPC mode, otherwise the hop operates in ATPC mode.
I32 availableMinOutputPower	1.3.6.1.4.1.193.223.2.7.1.1.31	Integer32	read-only	The minimum output power supported (dBm). The system shows a value if the equipment is available and a frame id has been selected.
I32 availableMaxOutputPower	1.3.6.1.4.1.193.223.2.7.1.1.32	Integer32	read-only	The maximum output power supported (dBm). The system shows a value if the equipment is available and a frame id has been selected.
INT referenceSec	1.3.6.1.4.1.193.223.2.7.1.1.33	INTEGER	read-write	Each modulation is compliant to a Reference Spectrum Efficiency Class (RSEC). When running Adaptive Coding/Modulation, one SEC has to be selected for all the coding/modulations between selectedMinACM and selectedMaxACM. This parameter is called Reference SEC. This setting will affect availableMaxOutputPower, in order to fulfill spectrum requirements. Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination.
I32 targetInputPowerFarEnd	1.3.6.1.4.1.193.223.2.7.1.1.34	Integer32	read-write	The wanted input power at far end (dBm), when running ATPC
INT berAlarmThreshold	1.3.6.1.4.1.193.223.2.7.1.1.35	INTEGER	read-write	Threshold for the BER alarm
I32 inputPowerAlarmThreshold	1.3.6.1.4.1.193.223.2.7.1.1.36	Integer32	read-write	Threshold for the input power alarm
I32 plannedAlignmentInputPower	1.3.6.1.4.1.193.223.2.7.1.1.37	Integer32	read-write	The planned received input power (dBm) dependent upon selected minimum ACM and corresponding output power. Used when doing alignment
ENA atpcFallback	1.3.6.1.4.1.193.223.2.7.1.1.38	EnableStatusTC	read-write	Enable or disable the output power fall back function
I32 atpcFallbackTimer	1.3.6.1.4.1.193.223.2.7.1.1.39	Integer32	read-write	Specifies the timer for output power fall back (# of seconds)
I32 atpcFallbackOutputPower	1.3.6.1.4.1.193.223.2.7.1.1.40	Integer32	read-write	The ATPC fallback output power
XPI xpicStatus	1.3.6.1.4.1.193.223.2.7.1.1.41	XpicMimoTC	read-only	Status of the XPIC function.
XPI mimoStatus	1.3.6.1.4.1.193.223.2.7.1.1.42	XpicMimoTC	read-only	Status of the MIMO function.
OCT actualSnir	1.3.6.1.4.1.193.223.2.7.1.1.43	OCTET STRING	read-only	Actual signal to noise plus interference ratio (dB).
OCT actualXpi	1.3.6.1.4.1.193.223.2.7.1.1.44	OCTET STRING	read-only	The carrier to cross-polar interference level (dBc).
OCT actualSi	1.3.6.1.4.1.193.223.2.7.1.1.45	OCTET STRING	read-only	Spatial interference between the CTs when MIMO is configured.
I32 actualTxCapacity	1.3.6.1.4.1.193.223.2.7.1.1.46	Integer32	read-only	Actual capacity supported by the carrier termination.
I32 licensedCapacity	1.3.6.1.4.1.193.223.2.7.1.1.47	Integer32	read-only	Wanted or installed license for the capacity allowed for the carrier termination.
I32 availableMinCapacity	1.3.6.1.4.1.193.223.2.7.1.1.48	Integer32	read-only	Minimum capacity possible to use. Given by the selected frame-id (kbit/s)
I32 availableMaxCapacity	1.3.6.1.4.1.193.223.2.7.1.1.49	Integer32	read-only	Maximum capacity possible to use. Given by the selected frame-id (kbit/s)
I32 selectedMinCapacity	1.3.6.1.4.1.193.223.2.7.1.1.50	Integer32	read-only	Selected minimum capacity, derived from selected minimum ACM (kbit/s)
I32 selectedMaxCapacity	1.3.6.1.4.1.193.223.2.7.1.1.51	Integer32	read-only	Selected maximum capacity, derived from selected maximum ACM (kbit/s)
I32 wantedLicensedCapacity	1.3.6.1.4.1.193.223.2.7.1.1.52	Integer32	read-write	Wanted licensed capacity and creation of LRF for the carrier termination (kbit/s)
ACM availableMinAcm	1.3.6.1.4.1.193.223.2.7.1.1.53	AcmTC	read-only	Minimum ACM possible to use, given by the selected frame id.
ACM availableMaxAcm	1.3.6.1.4.1.193.223.2.7.1.1.54	AcmTC	read-only	Maximum ACM possible to use, given by the selected frame id
ACM selectedMinAcm	1.3.6.1.4.1.193.223.2.7.1.1.55	AcmTC	read-write	Selected minimum coding/modulation. If selectedMinACM = selectedMaxACM, then the modulation is fixed
ACM selectedMaxAcm	1.3.6.1.4.1.193.223.2.7.1.1.56	AcmTC	read-write	Selected maximum coding/modulation. If selectedMinACM = selectedMaxACM, then the modulation is fixed
ACM actualRxAcmTC	1.3.6.1.4.1.193.223.2.7.1.1.57	AcmTC	read-only	Actual rx modulation and coding
ACM actualTxAcmTC	1.3.6.1.4.1.193.223.2.7.1.1.58	AcmTC	read-only	Actual tx modulation and coding
ENA alignmentMode	1.3.6.1.4.1.193.223.2.7.1.1.59	EnableStatusTC	read-write	Enable or disable the alignment mode
ENA rfLoop	1.3.6.1.4.1.193.223.2.7.1.1.60	EnableStatusTC	read-write	Enable or disable the rf loop
ptRadioLinkConformance	1.3.6.1.4.1.193.223.2.7.2
ptRadioLinkCompliances	1.3.6.1.4.1.193.223.2.7.2.1
ptRadioLinkFullCompliance	1.3.6.1.4.1.193.223.2.7.2.1.1			The compliance statement for SNMP entities which implement everything.
ptRadioLinkGroups	1.3.6.1.4.1.193.223.2.7.2.2
ptRadioLinkCompleteGroup	1.3.6.1.4.1.193.223.2.7.2.2.1			A collection of all current objects in this MIB module.
rltTable	1.3.6.1.4.1.193.223.2.7.3		not-accessible	A table of RLT Table entries.
rltEntry	1.3.6.1.4.1.193.223.2.7.3.1		not-accessible	An entry of RLT application.
OCT rltDistinguishedName	1.3.6.1.4.1.193.223.2.7.3.1.1	OCTET STRING	read-only	Unique id/name of the radio link termination, according to FDN (rack/slot/port/class)
IP neIpAddress	1.3.6.1.4.1.193.223.2.7.3.1.2	IpAddress	read-only	NE IP address
ADR neIpv6Address	1.3.6.1.4.1.193.223.2.7.3.1.3	InetAddressIPv6	read-only	NE IP V6 address
OCT neName	1.3.6.1.4.1.193.223.2.7.3.1.4	OCTET STRING	read-only	NE Name
INT neType	1.3.6.1.4.1.193.223.2.7.3.1.5	INTEGER	read-only	NE Type
OCT id	1.3.6.1.4.1.193.223.2.7.3.1.6	OCTET STRING	read-write	User defined id of the radio link terminal
INT rltStatus	1.3.6.1.4.1.193.223.2.7.3.1.7	INTEGER	read-only	The status of the radio link terminal
INT mode	1.3.6.1.4.1.193.223.2.7.3.1.8	INTEGER	read-write	The status of the radio link terminal
I32 actualTxTotalCapacity	1.3.6.1.4.1.193.223.2.7.3.1.9	Integer32	read-only	Actual aggregated total (packet + TDM) transmitter capacity for the radio link termination. Limited by licenses & configuration (=nearEndLimitedCapacity) and depending on actual modulation/coding used at the moment.
I32 limitedTotalCapacity	1.3.6.1.4.1.193.223.2.7.3.1.10	Integer32	read-only	Maximum total capacity allowed by the current configuration and installed licenses. Aggregated from the constituent carrier termination values.
INT protectionStatus	1.3.6.1.4.1.193.223.2.7.3.1.11	INTEGER	read-only	Status of a protected node.
I32 revertiveWaitToRestore	1.3.6.1.4.1.193.223.2.7.3.1.12	Integer32	read-write	The time, in number of seconds, to wait before switching back to the preferred Tx.
INT revertivePreferredTx	1.3.6.1.4.1.193.223.2.7.3.1.13	INTEGER	read-write	The preferred carrier termination transmitter.
INT protectionSwitchMode	1.3.6.1.4.1.193.223.2.7.3.1.14	INTEGER	read-write	.The mode in which the switching mechanism is configured
I32 fadeNotificationTimer	1.3.6.1.4.1.193.223.2.7.3.1.15	Integer32	read-write	Notification is sent if fading is longer than this timer, applicable for protection.
OCT expectedFarEndId	1.3.6.1.4.1.193.223.2.7.3.1.16	OCTET STRING	read-write	Expected id of far-end terminal
INT farEndIdCheck	1.3.6.1.4.1.193.223.2.7.3.1.17	INTEGER	read-write	Enabling of far end id check.
INT cpriMode	1.3.6.1.4.1.193.223.2.7.3.1.18	INTEGER	read-write	Set the mode of the CPRI front-haul product.
INT cpriStatus	1.3.6.1.4.1.193.223.2.7.3.1.19	INTEGER	read-only	The status of the CPRI front-haul product.
INT manualSwitch	1.3.6.1.4.1.193.223.2.7.3.1.20	INTEGER	read-write	Manual switch of protected carrier termination transmitter.
INT mlhcOperStatus	1.3.6.1.4.1.193.223.2.7.3.1.21	INTEGER	read-only	Operative status of multi layer header compression.
INT mlhcAdminStatus	1.3.6.1.4.1.193.223.2.7.3.1.22	INTEGER	read-write	Administrative status of multi layer header compression.
INT mlhcMplsConfig	1.3.6.1.4.1.193.223.2.7.3.1.23	INTEGER	read-write	MLHC/MPLS configuration.
INT plcOperStatus	1.3.6.1.4.1.193.223.2.7.3.1.24	INTEGER	read-only	Operative status of payload compression.
INT plcAdminStatus	1.3.6.1.4.1.193.223.2.7.3.1.25	INTEGER	read-write	Administrative status of payload compression.
ctPerformance	1.3.6.1.4.1.193.223.2.7.4
ctG826ContinuousTable	1.3.6.1.4.1.193.223.2.7.4.1		not-accessible	A table of CT G826 Performance Continuous counters entries. The counters are reset by ctG826Reset
ctG826ContinuousEntry	1.3.6.1.4.1.193.223.2.7.4.1.1		not-accessible	An entry of CT G826 Performance Continuous counters.
C32 ctG826TimeElapsed	1.3.6.1.4.1.193.223.2.7.4.1.1.1	Counter32	read-only	Time elapsed in seconds since last PMReset
C32 ctBBE	1.3.6.1.4.1.193.223.2.7.4.1.1.2	Counter32	read-only	Background Block Errors
OCT ctBBER	1.3.6.1.4.1.193.223.2.7.4.1.1.3	OCTET STRING	read-only	Background Block Errors Ratio
C32 ctES	1.3.6.1.4.1.193.223.2.7.4.1.1.4	Counter32	read-only	Error seconds
OCT ctESR	1.3.6.1.4.1.193.223.2.7.4.1.1.5	OCTET STRING	read-only	Error seconds Ratio
C32 ctSES	1.3.6.1.4.1.193.223.2.7.4.1.1.6	Counter32	read-only	Severely error seconds
OCT ctSESR	1.3.6.1.4.1.193.223.2.7.4.1.1.7	OCTET STRING	read-only	Severely error seconds Ratio
OCT ctBB	1.3.6.1.4.1.193.223.2.7.4.1.1.8	OCTET STRING	read-only	Background blocks
C32 ctUAS	1.3.6.1.4.1.193.223.2.7.4.1.1.9	Counter32	read-only	Unavailable seconds
INT ctG826Reset	1.3.6.1.4.1.193.223.2.7.4.1.1.10	INTEGER	read-write	Reset the continuous PM counters
ctG826Current15mTable	1.3.6.1.4.1.193.223.2.7.4.2		not-accessible	A table of CT Performance G826 15 m current counters Table entries.
ctG826Current15mEntry	1.3.6.1.4.1.193.223.2.7.4.2.1		not-accessible	An entry of CT Performance G826 15 m current Table counters.
C32 ctG826Current15mTimeElapsed	1.3.6.1.4.1.193.223.2.7.4.2.1.1	Counter32	read-only	Time elapsed in seconds since last PMReset
C32 ctCurrent15mBBE	1.3.6.1.4.1.193.223.2.7.4.2.1.2	Counter32	read-only	Background Block Errors
OCT ctCurrent15mBBER	1.3.6.1.4.1.193.223.2.7.4.2.1.3	OCTET STRING	read-only	Background Block Errors Ratio
C32 ctCurrent15mES	1.3.6.1.4.1.193.223.2.7.4.2.1.4	Counter32	read-only	Error seconds
OCT ctCurrent15mESR	1.3.6.1.4.1.193.223.2.7.4.2.1.5	OCTET STRING	read-only	Error seconds Ratio
C32 ctCurrent15mSES	1.3.6.1.4.1.193.223.2.7.4.2.1.6	Counter32	read-only	Severely error seconds
OCT ctCurrent15mSESR	1.3.6.1.4.1.193.223.2.7.4.2.1.7	OCTET STRING	read-only	Severely error seconds Ratio
C32 ctCurrent15mBB	1.3.6.1.4.1.193.223.2.7.4.2.1.8	Counter32	read-only	Background blocks
C32 ctCurrent15mUAS	1.3.6.1.4.1.193.223.2.7.4.2.1.9	Counter32	read-only	Unavailable seconds
ctG826Current24hTable	1.3.6.1.4.1.193.223.2.7.4.3		not-accessible	A table of CT Performance G826 Current 24h counters entries.
ctG826Current24hEntry	1.3.6.1.4.1.193.223.2.7.4.3.1		not-accessible	An entry of CT Performance G826 Current 24 h counters.
C32 ctG826Current24hTimeElapsed	1.3.6.1.4.1.193.223.2.7.4.3.1.1	Counter32	read-only	Time elapsed in seconds since last PMReset
C32 ctCurrent24hBBE	1.3.6.1.4.1.193.223.2.7.4.3.1.2	Counter32	read-only	Background Block Errors
OCT ctCurrent24hBBER	1.3.6.1.4.1.193.223.2.7.4.3.1.3	OCTET STRING	read-only	Background Block Errors Ratio
C32 ctCurrent24hES	1.3.6.1.4.1.193.223.2.7.4.3.1.4	Counter32	read-only	Error seconds
OCT ctCurrent24hESR	1.3.6.1.4.1.193.223.2.7.4.3.1.5	OCTET STRING	read-only	Error seconds Ratio
C32 ctCurrent24hSES	1.3.6.1.4.1.193.223.2.7.4.3.1.6	Counter32	read-only	Severely error seconds
OCT ctCurrent24hSESR	1.3.6.1.4.1.193.223.2.7.4.3.1.7	OCTET STRING	read-only	Severely error seconds Ratio
C32 ctCurrent24hBB	1.3.6.1.4.1.193.223.2.7.4.3.1.8	Counter32	read-only	Background blocks
C32 ctCurrent24hUAS	1.3.6.1.4.1.193.223.2.7.4.3.1.9	Counter32	read-only	Unavailable seconds

RFC description

Ericsson radio link MIB for MINI-LINK microwave and point-to-point radio connectivity management.

Start monitoring Ericsson MINI-LINK microwave radio link equipment (G.826 error-performance) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PT-RADIOLINK-MIB

What Is PT-RADIOLINK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description