RUCKUS-ADAPTER-MIB

All MIBs › RUCKUS-ADAPTER-MIB

Organization: Ruckus Wireless, Inc.

Last Updated: 2010-10-15

Category: Wireless and Radio

Description: Manages Ruckus Wireless adapter configuration and network attachment parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RUCKUS-ADAPTER-MIB?

RUCKUS-ADAPTER-MIB is a vendor MIB from Ruckus Wireless for managing wireless client adapter devices and their network attachment/association parameters. It exposes an adapter table for base configuration (MAC address, reboot control), an adapter-info table describing the wireless association (SSID, BSSID) and connection quality, and a statistics table for traffic/performance counters, alongside an events group for notifications. Its monitoring value directly covers wireless client hardware/software status: whether the adapter has associated to the expected SSID/BSSID, its received signal strength (RSSI) as a proxy for wireless link quality, and the ability to remotely trigger a reboot of the adapter as a recovery action. It appears to be a self-contained enterprise MIB specific to Ruckus adapter hardware, without evident dependency on other standard wireless MIBs. It is typically deployed on Ruckus wireless client adapters/bridges used to connect fixed devices to a Ruckus Wi-Fi network in retail, hospitality, or industrial settings, and administrators can download the RUCKUS-ADAPTER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RUCKUS-ADAPTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ruckus Wireless (now CommScope Ruckus) client adapter/bridge devices

Monitoring Examples

An operator would poll ruckusAdapterInfoTable/ruckusAdapterInfoEntry indexed by ruckusAdapterInfoMacAddr to check ruckusAdapterInfoSSID and ruckusAdapterInfoBSSID against the expected access point, confirming the adapter hasn't roamed to or gotten stuck on an unintended AP. ruckusAdapterRssi dropping over time would indicate a degrading wireless link needing repositioning or interference investigation, while ruckusAdapterStatTable/ruckusAdapterStatEntry would be polled for traffic counters to correlate throughput drops with the RSSI trend. If an adapter becomes unresponsive, ruckusAdapterReboot in ruckusAdapterTable provides a remote recovery action tied to ruckusAdapterMacAddress.

What Can Be Monitored

adapter MAC address
associated SSID/BSSID
signal strength (RSSI)
adapter traffic statistics
remote reboot status

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From RUCKUS-ROOT-MIB

ruckusCommonAdapterModule

OBJECT-IDENTITY

From RUCKUS-TC-MIB

RuckusSSID
RuckusdB

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using ruckusAdapterStatRxDataFrames OID:

Select a Ruckus Wireless client adapter/bridge device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ruckusAdapterStatRxDataFrames into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports rx data frames. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ruckusAdapterMIB	1.3.6.1.4.1.25053.1.1.9.1			Ruckus adapter mib module.
ruckusAdapterObjects	1.3.6.1.4.1.25053.1.1.9.1.1
ruckusAdapterInfo	1.3.6.1.4.1.25053.1.1.9.1.1.1
ruckusAdapterTable	1.3.6.1.4.1.25053.1.1.9.1.1.1.1		not-accessible	Specifies adapter table.
ruckusAdapterEntry	1.3.6.1.4.1.25053.1.1.9.1.1.1.1.1		not-accessible	Specifies each adapter entry.
MAC ruckusAdapterMacAddress	1.3.6.1.4.1.25053.1.1.9.1.1.1.1.1.1	MacAddress	not-accessible	Specifies adapter hardware address. An index into the table.
T/F ruckusAdapterReboot	1.3.6.1.4.1.25053.1.1.9.1.1.1.1.1.2	TruthValue	read-write	Setting to true(1) would cause to reboot the adapter. Always returns false(2)
ruckusAdapterInfoTable	1.3.6.1.4.1.25053.1.1.9.1.1.1.2		not-accessible	Specifies each adapter table.
ruckusAdapterInfoEntry	1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1		not-accessible	Specifies each adapter entry.
MAC ruckusAdapterInfoMacAddr	1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1.1	MacAddress	not-accessible	Adapter mac address, an index into the table.
RUC ruckusAdapterInfoSSID	1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1.2	RuckusSSID	read-only	Specifies the SSID.
MAC ruckusAdapterInfoBSSID	1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1.3	MacAddress	read-only	Specifies the BSS ID.
RUC ruckusAdapterRssi	1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1.4	RuckusdB	read-only	Specifies the RSSI.
ruckusAdapterStatTable	1.3.6.1.4.1.25053.1.1.9.1.1.1.3		not-accessible	Specifies adapter table.
ruckusAdapterStatEntry	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1		not-accessible	Specifies each adapter entry.
MAC ruckusAdapterStatMacAddr	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.1	MacAddress	not-accessible	Adapter mac address, an index into the table.
C32 ruckusAdapterStatRxDataFramesEx	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.2	Counter32	read-only	Rx data frames.
C32 ruckusAdapterStatRxMgmtFrames	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.3	Counter32	read-only	Rx management frames.
C32 ruckusAdapterStatRxCtrlFrames	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.4	Counter32	read-only	Rx control frames.
C32 ruckusAdapterStatRxUcastFrames	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.5	Counter32	read-only	Rx unicast frames.
C32 ruckusAdapterStatRxMcastFrames	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.6	Counter32	read-only	Rx multicast/broadcast frames.
C32 ruckusAdapterStatRxBytes	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.7	Counter32	read-only	Rx data count (bytes)
C32 ruckusAdapterStatRxDup	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.8	Counter32	read-only	Rx discard because of duplicates.
C32 ruckusAdapterStatRxNoPrivacy	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.9	Counter32	read-only	Rx w/ wep but privacy off.
C32 ruckusAdapterStatRxWEPFail	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.10	Counter32	read-only	Rx wep processing failed.
C32 ruckusAdapterStatRxDemicFail	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.11	Counter32	read-only	Rx demic failed.
C32 ruckusAdapterStatRxDecap	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.12	Counter32	read-only	Rx decapsulation failed.
C32 ruckusAdapterStatRxDeFrag	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.13	Counter32	read-only	Rx defragmentation failed.
C32 ruckusAdapterStatRxDisAssoc	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.14	Counter32	read-only	Rx dis associations.
C32 ruckusAdapterStatRxDeAuth	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.15	Counter32	read-only	Rx de authentication.
C32 ruckusAdapterStatRxUnAuth	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.16	Counter32	read-only	Rx un authenticated.
C32 ruckusAdapterStatRxUnEncrypted	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.17	Counter32	read-only	Rx un encrypted.
C32 ruckusAdapterStatRxBeacons	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.18	Counter32	read-only	Rx beacons.
C32 ruckusAdapterStatTxDataFrames	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.19	Counter32	read-only	Rx data frames.
C32 ruckusAdapterStatTxMgmtFrames	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.20	Counter32	read-only	Tx management frames.
C32 ruckusAdapterStatTxUcastFrames	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.21	Counter32	read-only	Tx unicast frames.
C32 ruckusAdapterStatTxMcastFrames	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.22	Counter32	read-only	Tx multicast
C32 ruckusAdapterStatTxBytes	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.23	Counter32	read-only	Tx data count (bytes).
C32 ruckusAdapterStatTxAssoc	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.24	Counter32	read-only	[re]associations.
C32 ruckusAdapterStatTxAssocFail	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.25	Counter32	read-only	[re]association failures.
C32 ruckusAdapterStatTxAuth	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.26	Counter32	read-only	[re]authentications.
C32 ruckusAdapterStatTxAuthFail	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.27	Counter32	read-only	[re]authentication failures.
C32 ruckusAdapterStatTxDeAuth	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.28	Counter32	read-only	Tx de auth.
C32 ruckusAdapterStatTxDisAssoc	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.29	Counter32	read-only	Tx dis associations.
C32 ruckusAdapterStatTxProbeReq	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.30	Counter32	read-only	Tx probe requests.
C32 ruckusAdapterStatTxProbeResp	1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.31	Counter32	read-only	Tx probe responses.
ruckusAdapterEvents	1.3.6.1.4.1.25053.1.1.9.1.2

RFC description

SNMP MIB for Ruckus wireless adapters and access points, providing management objects for wireless interface configuration and performance.

Start monitoring Ruckus Wireless client adapter/bridge devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RUCKUS-ADAPTER-MIB