All MIBs › PSA-COM-MIB
Category: Server Hardware Monitoring
Description: Defines NEC ESMPRO ServerAgents common base OID structure and shared textual conventions for PSA server monitoring MIBs.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is PSA-COM-MIB?
PSA-COM-MIB is the common base module for NEC's ESMPRO ServerAgent family of MIBs, defining the shared enterprise OID structure and textual conventions (PSA branch) that the rest of the ESMPRO server-monitoring MIB suite builds upon. Despite being a common foundation module, it also directly defines physical CPU inventory and status objects — a physicalCpuTable listing each installed processor by slot/board number and physical ID, along with its type, stepping, and L3 cache size. This gives it clear hardware status monitoring value: phCpuStatus, phCpuPredictedStatus, and phCpuPresentStatus let an administrator see whether each CPU in a server is currently healthy, predicted to fail, or already faulted, which is critical for catching a failing processor before it causes a system outage. As the base module for the ESMPRO ServerAgent suite, essentially every other PSA-*-MIB (such as trap modules) depends on the OID tree and conventions this module establishes. It is deployed on NEC Express5800-series and other NEC servers running ESMPRO ServerAgent management software in enterprise data centers. Network engineers evaluating or troubleshooting this functionality can download the PSA-COM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in PSA-COM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Fujitsu PRIMEQUEST server partition (ESMPRO ServerAgent common base, physical CPU inventory)
Monitoring Examples
An administrator would poll physicalCpuTable and walk each physicalCpuEntry to check phCpuStatus and phCpuPresentStatus for every phCpuNumber, watching for a status other than normal that would indicate a degraded or failed processor. phCpuPredictedStatus is particularly valuable since it can flag a CPU trending toward failure (e.g., via correlated ECC or thermal events) before an actual fault occurs, letting staff schedule a replacement during planned maintenance. phCpuCacheL3Size and phCpuType also let an inventory audit confirm exactly which processor model is installed in each socket.
What Can Be Monitored
- per-CPU operational status
- predicted CPU failure status
- CPU type and stepping
- CPU cache size
- CPU slot/board inventory
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| TimeTicks | |
| enterprises | |
| mgmt |
From RFC1213-MIB
| DisplayString | |
| PhysAddress | |
| mib-2 |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| fujitsu | 1.3.6.1.4.1.211 | |||
| products | 1.3.6.1.4.1.211.1 | |||
| iaServer | 1.3.6.1.4.1.211.1.31 | |||
| primequest | 1.3.6.1.4.1.211.1.31.1 | |||
| partition | 1.3.6.1.4.1.211.1.31.1.2 | |||
| partitionCommon | 1.3.6.1.4.1.211.1.31.1.2.100 | |||
| physicalComponent | 1.3.6.1.4.1.211.1.31.1.2.100.1 | |||
| physicalCpuInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.1 | |||
| physicalCpuTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1 | not-accessible | Table with physical CPU information | |
| physicalCpuEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1 | not-accessible | ||
| INT phCpuSBNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.1 | INTEGER | read-only | SystemBoard identification number that the CPU belongs.(index: 0 based) |
| INT phCpuNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.2 | INTEGER | read-only | CPU identification number.(index: 0 based) |
| STR phCpuPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.3 | DisplayString | read-only | CPU identification name.(e.g. SB#1-CPU#A0) |
| INT phCpuStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.4 | INTEGER | read-only | CPU total status. (Bit field); deprecated: PSA-2.0.0 or later does not support this objest. Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| INT phCpuPredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.5 | INTEGER | read-only | CPU predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT phCpuPresentStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.6 | INTEGER | read-only | CPU present status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 degraded 0x00040000 unknown 0x00010000 |
| STR phCpuType | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.7 | DisplayString | read-only | CPU type.(e.g. Itanium2 etc...) deprecated: PSA-2.0.0 or later does not support this objest. refer to the 'phCpuModelName' instead of this object. |
| STR phCpuStep | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.8 | DisplayString | read-only | CPU step(revision). This object shows CPU Info value (hex) in PSA-2.0.0 or later. |
| INT phCpuCacheL3Size | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.9 | INTEGER | read-only | CPU cache L3 size.(unit:Kbyte) |
| CTR phCpuCorrectableErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.10 | Counter | read-write | Number of CPU correctable errors. Set the value 0 if you want to reset the CPU error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| INT phCpuSpeed | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.11 | INTEGER | read-only | CPU speed(unit:MHz). |
| INT phCpuNumOfLogicalCpu | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.12 | INTEGER | read-only | Number of logical CPUs in this physical CPU; NOSUPPORT. |
| STR phCpuModelName | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.1.1.13 | DisplayString | read-only | CPU model name.(e.g. Intel(R) Itanium(R) 2 Processor etc...) |
| INT numOfEffectiveCpus | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.2 | INTEGER | read-only | Number of effective CPUs in the partition. |
| INT numOfEffectiveSockets | 1.3.6.1.4.1.211.1.31.1.2.100.1.1.3 | INTEGER | read-only | Number of effective sockets in the partition. |
| memoryModuleInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.2 | |||
| memoryModuleTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1 | not-accessible | Table with memory module information | |
| memoryModuleEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1 | not-accessible | ||
| INT memMdSBNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.1 | INTEGER | read-only | SystemBoard identification number that the MemoryModule belongs.(index: 0 based) |
| INT memMdNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.2 | INTEGER | read-only | Memory module identification number. |
| STR memMdPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.3 | DisplayString | read-only | Memory module identification name. |
| INT memMdStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.4 | INTEGER | read-only | Memory module total status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT memMdPredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.5 | INTEGER | read-only | Memory module 1bit error predicted status.(Bit filed) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT memMdPresentStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.6 | INTEGER | read-only | Memory module present status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 degraded 0x00040000 unknown 0x00010000 |
| STR memMdPartNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.7 | DisplayString | read-only | Memory module type. |
| STR memMdSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.8 | DisplayString | read-only | |
| INT memMdSize | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.9 | INTEGER | read-only | Memory module size.(unit:Mbyte) |
| INT memMdBank | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.10 | INTEGER | read-only | Memory module bank number. This object is valid in PRIMEQUEST400/500/500A serise. |
| CTR memMdCorrectableErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.11 | Counter | read-write | Number of Memory module correctable errors(1bit). Set the value 0 if you want to reset the Memory module error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| INT memMdAccessSpeed | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.12 | INTEGER | read-only | Memory module access speed. |
| CTR memMd2bitCorrectableErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.13 | Counter | read-write | Number of Memory module correctable errors(2bit). Set the value 0 if you want to reset the Memory module error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| INT memMd2bitPredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.14 | INTEGER | read-only | Memory module 2bit error predicted status.(Bit filed) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT memMdRank | 1.3.6.1.4.1.211.1.31.1.2.100.1.2.1.1.15 | INTEGER | read-only | Memory module rank number. |
| hddInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.3 | |||
| scsiDeviceTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1 | not-accessible | Table with SCSI device information | |
| scsiDeviceEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1 | not-accessible | ||
| INT scsiDevBusType | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.1 | INTEGER | read-only | Bus type of the SCSI device. |
| INT scsiDevSegment | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.2 | INTEGER | read-only | Segment number of the SCSI device. |
| INT scsiDevBusNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.3 | INTEGER | read-only | Bus number of the SCSI device. |
| INT scsiDevDeviceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.4 | INTEGER | read-only | Device number of the SCSI device. |
| INT scsiDevFunction | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.5 | INTEGER | read-only | Function number of the SCSI device. |
| INT scsiDevChannel | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.6 | INTEGER | read-only | Channel number of the SCSI device. |
| INT scsiDevScsiId | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.7 | INTEGER | read-only | SCSI target identification number of the SCSI device. |
| INT scsiDevLUN | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.8 | INTEGER | read-only | Logical Unit Number of the SCSI device. |
| STR scsiDevPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.9 | DisplayString | read-only | SCSI device identification name. |
| INT scsiDevTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.10 | INTEGER | read-only | SCSI device total status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| INT scsiDevSMARTStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.11 | INTEGER | read-write | Memory module predicted status.(Bit filed) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 |
| INT scsiDevStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.12 | INTEGER | read-write | SCSI device status.(Bit field) Status Bit ok 0x00000000 error 0x01000000 warning 0x00100000 unknown 0x00010000 |
| STR scsiDevName | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.13 | DisplayString | read-only | Symbolic name of the SCSI device. |
| INT scsiDevType | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.14 | INTEGER | read-only | SCSI device type. Refer to the following definitions; value contens 0 directAccess 1 sequentialAccess 2 printer 3 processor 4 worm 5 cdRom 6 scanner 7 opticalDevice 8 mediumChanger 9 communications 10-13 unknown 100 directAccess-softmirror by Fujitsu's GDS(Linux) or PSDM(Windows) driver. |
| STR scsiDevVendor | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.15 | DisplayString | read-only | SCSI device vendor name. |
| INT scsiDevHostNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.16 | INTEGER | read-only | SCSI controller host number. |
| INT scsiDevCapacity | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.17 | INTEGER | read-only | Total capacity of the SCSI device(unit:Mbyte). |
| INT scsiDevSector | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.18 | INTEGER | read-only | SCSI device number of sector. |
| INT scsiDevCylinder | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.19 | INTEGER | read-only | Cylinder of the SCSI device. |
| INT scsiDevBlockSize | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.20 | INTEGER | read-only | SCSI device block size(unit:byte); NOSUPPORT. |
| INT scsiDevSectorSize | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.21 | INTEGER | read-only | SCSI device sector size.(unit:byte) |
| STR scsiDevSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.22 | DisplayString | read-only | SCSI device serial number. |
| STR scsiDevRevision | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.23 | DisplayString | read-only | SCSI device revision. |
| STR scsiDevSpecialFile | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.24 | DisplayString | read-only | SCSI device special file name. |
| STR scsiDevDiskName | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.1.1.25 | DisplayString | read-only | SCSI device disk name.(e.g. Disk 0); This object supports only information on the Windows partition. |
| diskSliceTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2 | not-accessible | Table with disk slice information; This table supports only information on the Linux partition. | |
| diskSliceEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1 | not-accessible | ||
| INT dsBusType | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.1 | INTEGER | read-only | Bus type of the disk slice. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| INT dsSegment | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.2 | INTEGER | read-only | Segment number of the disk slice. |
| INT dsBusNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.3 | INTEGER | read-only | Bus number of the disk slice. |
| INT dsDeviceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.4 | INTEGER | read-only | Device number of the disk slice. |
| INT dsFunction | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.5 | INTEGER | read-only | Function number of the disk slice. |
| INT dsChannel | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.6 | INTEGER | read-only | Channel number of the disk slice. |
| INT dsScsiId | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.7 | INTEGER | read-only | SCSI target identification number of the disk slice. |
| INT dsLUN | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.8 | INTEGER | read-only | Logical Unit Number of the disk slice. |
| INT dsSliceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.9 | INTEGER | read-only | Disk slice identification number. |
| STR dsDeviceSpecialFile | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.10 | DisplayString | read-only | Device special file name of the disk slice. |
| INT dsOffset | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.11 | INTEGER | read-only | Offset of the disk slice.(unit:Mbyte) |
| STR dsFileSystemType | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.12 | DisplayString | read-only | File system type of the disk slice. |
| INT dsCapacity | 1.3.6.1.4.1.211.1.31.1.2.100.1.3.2.1.13 | INTEGER | read-only | Capacity of the disk slice.(unit:Mbyte) |
| nicInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.4 | |||
| nicTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1 | not-accessible | ||
| nicEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1 | not-accessible | ||
| INT nicBusType | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.1 | INTEGER | read-only | Bus type of the network interface card.. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| INT nicSegment | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.2 | INTEGER | read-only | Segment number of the network interface card. |
| INT nicBusNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.3 | INTEGER | read-only | Bus number of the network interface card. |
| INT nicDeviceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.4 | INTEGER | read-only | Device number of the network interface card. |
| INT nicFunction | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.5 | INTEGER | read-only | Function number of the network interface card. |
| PHY nicMACAddress | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.6 | PhysAddress | read-only | The interface address of the physical layer of the network interface card. |
| INT nicSpeed | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.7 | INTEGER | read-only | Ratings speed of network interface card.(unit:Mbit/s) |
| CTR nicTransmissionTotalPacket | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.8 | Counter | read-only | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address; including those that were discarded or not sent. |
| CTR nicTransmissionTotalByte | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.9 | Counter | read-only | The total number of octets transmitted out of the interface; including framing characters. |
| CTR nicDeferredXmits | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.10 | Counter | read-only | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. |
| CTR nicSingleCollisions | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.11 | Counter | read-only | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. |
| CTR nicMultipleCollisions | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.12 | Counter | read-only | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. |
| CTR nicExcessiveCollisions | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.13 | Counter | read-only | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| CTR nicCarrierSenceErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.14 | Counter | read-only | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. |
| CTR nicLateCollisionErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.15 | Counter | read-only | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. |
| CTR nicSQETestErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.16 | Counter | read-only | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document. |
| CTR nicMACXmitsErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.17 | Counter | read-only | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object; the dot3StatsExcessiveCollisions object; or the dot3StatsCarrierSenseErrors object. |
| CTR nicReceiveTotalPacket | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.18 | Counter | read-only | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| CTR nicReceiveTotalByte | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.19 | Counter | read-only | The total number of octets received on the interface; including framing characters. |
| CTR nicFCSErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.20 | Counter | read-only | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. |
| CTR nicAlignmentErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.21 | Counter | read-only | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. |
| CTR nicFrameTooLong | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.22 | Counter | read-only | A count of frames received on a particular interface that exceed the maximum permitted frame size. |
| CTR nicMACReceiveErrors | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.1.1.23 | Counter | read-only | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object; the dot3StatsAlignmentErrors object; or the dot3StatsFCSErrors object. |
| CTR ipPacketIn | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.2 | Counter | read-only | This object supports only information on the Linux partition. |
| CTR ipPacketOut | 1.3.6.1.4.1.211.1.31.1.2.100.1.4.3 | Counter | read-only | This object supports only information on the Linux partition. |
| pciFunctionInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.5 | |||
| pciFunctionTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1 | not-accessible | ||
| pciFunctionEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1 | not-accessible | ||
| INT pciFuncBusType | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.1 | INTEGER | read-only | Bus type of the pci device.. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| INT pciFuncSegment | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.2 | INTEGER | read-only | Segment number of the pci device. |
| INT pciFuncBusNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.3 | INTEGER | read-only | Bus number of the pci device. |
| INT pciFuncDeviceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.4 | INTEGER | read-only | Device number of the pci device. |
| INT pciFuncFunction | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.5 | INTEGER | read-only | Function number of the pci device. |
| STR pciFuncPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.6 | DisplayString | read-only | Pci device identification name. |
| INT pciFuncTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.7 | INTEGER | read-only | Pci device total status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| INT pciFuncStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.9 | INTEGER | read-write | Pci Function status.(Bit field) Status Bit ok 0x00000000 error 0x01000000 warning 0x00100000 unknown 0x00010000 |
| STR pciFuncAdapterModel | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.10 | DisplayString | read-only | Pci device model id. |
| OCT pciFuncClass | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.11 | OCTET STRING | read-only | Device classification; according to the PCI classification scheme. Bbyte Contents 0 BaseClass 1 SubClass 2 ProgIf |
| STR pciFuncVendor | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.12 | DisplayString | read-only | PCI card vendor id. |
| STR pciFuncRevision | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.13 | DisplayString | read-only | PCI card revision. |
| STR pciDeviceName | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.14 | DisplayString | read-only | PCI device name string. [vendor name + device name]. |
| STR pciFuncWWN | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.15 | DisplayString | read-only | PCI card WWN(World Wide Name) information. |
| STR pciFuncVPDPN | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.16 | DisplayString | read-only | PCI card VPD PN information; deprecated: PSA-2.0.0 or later does not support this objest. |
| INT pciFuncConnIOU | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.17 | INTEGER | read-only | IOU number which PCI card connected; deprecated: PSA-2.0.0 or later does not support this objest. |
| INT pciFuncDivSide | 1.3.6.1.4.1.211.1.31.1.2.100.1.5.1.1.18 | INTEGER | read-only | PCI card divide side; deprecated: PSA-2.0.0 or later does not support this objest. 1=no-divided; 2=IOU_A side; 3=IOU_B side |
| systemBoardInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.6 | |||
| systemBoardTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1 | not-accessible | ||
| systemBoardEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1 | not-accessible | ||
| INT sbSBNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.1 | INTEGER | read-only | System board identification number.(index:0 based) |
| STR sbPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.2 | DisplayString | read-only | System board identification name. |
| INT sbTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.3 | INTEGER | read-only | System board total status.(Bit field); deprecated: PSA-2.0.0 or later does not support this objest. Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| INT sbCSFLNPredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.4 | INTEGER | read-only | System board FLN predicted status.(Bit field); deprecated: PSA-2.0.0 or later does not support this objest. Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 |
| INT sbCSLDX0PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.5 | INTEGER | read-only | System board LDX#0 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbCSLDX1PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.6 | INTEGER | read-only | System board LDX#1 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbCSLDX2PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.7 | INTEGER | read-only | System board LDX#2 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbCSLDX3PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.8 | INTEGER | read-only | System board LDX#3 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbType | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.9 | INTEGER | read-only | System board type. |
| STR sbModel | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.10 | DisplayString | read-only | System board model name. |
| STR sbSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.11 | DisplayString | read-only | System board serial number. |
| INT sbNumOfEffectiveCpus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.12 | INTEGER | read-only | Number of effective CPUs on system board. |
| INT sbNumOfEffectiveSockets | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.13 | INTEGER | read-only | Number of effective sockets on system board. |
| INT sbNumOfEffectiveMemModules | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.14 | INTEGER | read-only | Number of effective memory modules on system board. |
| INT sbNumOfEffectiveMemSlots | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.15 | INTEGER | read-only | Number of effective memory slots on system board. |
| CTR sbCSFLNErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.16 | Counter | read-write | Number of FLN correctable errors. Set the value 0 if you want to reset the FLN error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbCSLDX0ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.17 | Counter | read-write | Number of LDX#0 correctable errors. Set the value 0 if you want to reset the LDX#0 error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbCSLDX1ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.18 | Counter | read-write | Number of LDX#1 correctable errors. Set the value 0 if you want to reset the LDX#1 error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbCSLDX2ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.19 | Counter | read-write | Number of LDX#2 correctable errors. Set the value 0 if you want to reset the LDX#2 error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbCSLDX3ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.20 | Counter | read-write | Number of LDX#3 correctable errors. Set the value 0 if you want to reset the LDX#3 error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbEntityStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.21 | INTEGER | read-only | Only System board's total status. This status doesn't include CPU and Memory status which is mounted the System board.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbFLNGAC0PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.22 | INTEGER | read-only | Predicted status between FLN and GAC#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbFLNGAC1PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.23 | INTEGER | read-only | Predicted status between FLN and GAC#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbLDX0GDX0PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.24 | INTEGER | read-only | Predicted status between LDX#0 and GDX#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbLDX1GDX1PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.25 | INTEGER | read-only | Predicted status between LDX#1 and GDX#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbLDX2GDX2PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.26 | INTEGER | read-only | Predicted status between LDX#2 and GDX#2.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbLDX3GDX3PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.27 | INTEGER | read-only | Predicted status between LDX#3 and GDX#3.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 |
| CTR sbFLNGAC0ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.28 | Counter | read-write | Number of correctable errors between FLN and GAC#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbFLNGAC1ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.29 | Counter | read-write | Number of correctable errors between FLN and GAC#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbLDX0GDX0ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.30 | Counter | read-write | Number of correctable errors between LDX#0 and GDX#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbLDX1GDX1ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.31 | Counter | read-write | Number of correctable errors between LDX#1 and GDX#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbLDX2GDX2ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.32 | Counter | read-write | Number of correctable errors between LDX#2 and GDX#2. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbLDX3GDX3ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.33 | Counter | read-write | Number of correctable errors between LDX#3 and GDX#3. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbLDX1GDX0PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.34 | INTEGER | read-only | Predicted status between LDX#1 and GDX#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbLDX2GDX1PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.35 | INTEGER | read-only | Predicted status between LDX#2 and GDX#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT sbLDX3GDX1PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.36 | INTEGER | read-only | Predicted status between LDX#3 and GDX#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbLDX1GDX0ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.37 | Counter | read-write | Number of correctable errors between LDX#1 and GDX#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbLDX2GDX1ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.38 | Counter | read-write | Number of correctable errors between LDX#2 and GDX#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR sbLDX3GDX1ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.6.1.1.39 | Counter | read-write | Number of correctable errors between LDX#3 and GDX#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| iobInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.7 | |||
| iobTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1 | not-accessible | Table with I/O board information. In the case of 'PRIMEQUEST 420'; Index 0 of this table shows the IOU information and index 1 of this table shows the IOX information. | |
| iobEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1 | not-accessible | ||
| INT iobIOBNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.1 | INTEGER | read-only | I/O board identification number.(index:0 based) |
| STR iobPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.2 | DisplayString | read-only | I/O board identification name. |
| INT iobTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.3 | INTEGER | read-only | I/O board total status.(Bit field); deprecated: PSA-2.0.0 or later does not support this objest. Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| INT iobCSFLIPredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.4 | INTEGER | read-only | I/Oboard FLI predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobCSFLP0PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.5 | INTEGER | read-only | I/Oboard FLP#0 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobCSFLP1PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.6 | INTEGER | read-only | I/Oboard FLP#1 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobType | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.7 | INTEGER | read-only | I/O board type; NOSUPPORT. |
| STR iobSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.8 | DisplayString | read-only | I/O board serial number. |
| STR iobModelNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.9 | DisplayString | read-only | I/O board model number. |
| CTR iobCSFLIErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.10 | Counter | read-write | Number of FLI correctable errors. Set the value 0 if you want to reset the FLI error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR iobCSFLP0ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.11 | Counter | read-write | Number of FLP#0 correctable errors. Set the value 0 if you want to reset the FLP#0 error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR iobCSFLP1ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.12 | Counter | read-write | Number of FLP#1 correctable errors. Set the value 0 if you want to reset the FLP#1 error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobFLIGDX0PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.13 | INTEGER | read-only | Predicted status between FLI and GDX#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobFLIGDX1PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.14 | INTEGER | read-only | Predicted status between FLI and GDX#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobFLIGDX2PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.15 | INTEGER | read-only | Predicted status between FLI and GDX#2.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobFLIGDX3PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.16 | INTEGER | read-only | Predicted status between FLI and GDX#3.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobFLIGAC0PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.17 | INTEGER | read-only | Predicted status between FLI and GAC#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT iobFLIGAC1PredictedStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.18 | INTEGER | read-only | Predicted status between FLI and GAC#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR iobFLIGDX0ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.19 | Counter | read-write | Number of correctable errors between FLI and GDX#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR iobFLIGDX1ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.20 | Counter | read-write | Number of correctable errors between FLI and GDX#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR iobFLIGDX2ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.21 | Counter | read-write | Number of correctable errors between FLI and GDX#2. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR iobFLIGDX3ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.22 | Counter | read-write | Number of correctable errors between FLI and GDX#3. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR iobFLIGAC0ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.23 | Counter | read-write | Number of correctable errors between FLI and GAC#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| CTR iobFLIGAC1ErrorCount | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.1.1.24 | Counter | read-write | Number of correctable errors between FLI and GAC#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest. |
| iobSlotTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.2 | not-accessible | Table with IOB PCI slots information. | |
| iobSlotEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.2.1 | not-accessible | ||
| INT iobSlotIOBNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.2.1.1 | INTEGER | read-only | IOB PCI board identification number.(index:0 based) |
| INT iobSlotSlotNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.2.1.2 | INTEGER | read-only | IOB PCI slot identification number.(index:0 based) |
| INT iobSlotPresentStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.2.1.3 | INTEGER | read-only | IOB PCI slot present status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 unknown 0x00010000 |
| INT iobSlotPowerStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.7.2.1.4 | INTEGER | read-only | IOB PCI slot power status. Status Value power-on 0 power-off 1 |
| sduInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.8 | |||
| sduTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1 | not-accessible | Table with SCSI disk unit information. | |
| sduEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1 | not-accessible | ||
| INT sduNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.1 | INTEGER | read-only | SCSI disk unit identification number.(index) |
| STR sduPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.2 | DisplayString | read-only | SCSI disk unit identification name. |
| INT sduTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.3 | INTEGER | read-only | SCSI disk unit total status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| INT sduStatusClear | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.4 | INTEGER | read-write | SCSI disk unit total status clear. |
| INT sduFANRedundancyStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.5 | INTEGER | read-only | Fan in SCSI disk unit redundancy status. Status Value Redundant 1 Non-Redundant: Sufficient Resources 2 Non-Redundant: Insufficient Resources 3 Unknown 99 |
| INT sduPSURedundancyStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.6 | INTEGER | read-only | Power supply unit in SCSI disk unit redundancy status. Status Value Redundant 1 Non-Redundant: Sufficient Resources 2 Non-Redundant: Insufficient Resources 3 Unknown 99 |
| STR sduModelName | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.7 | DisplayString | read-only | SCSI disk unit model name.(e.g. PS10R...) |
| STR sduFirmwareRevision | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.8 | DisplayString | read-only | SCSI disk unit firmware revision.(e.g. 1.02...) |
| INT sduLEDStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.1.1.9 | INTEGER | read-write | SCSI disk unit LED status. |
| sduControllerTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2 | not-accessible | Table with SCSI disk unit's controller information. | |
| sduControllerEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1 | not-accessible | ||
| INT sduCtlSDUNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.1 | INTEGER | read-only | SCSI disk unit identification number.(index) |
| INT sduCtlControllerNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.2 | INTEGER | read-only | SCSI disk unit's controller number.(index) |
| STR sduCtlPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.3 | DisplayString | read-only | SCSI disk unit's controller identification name. |
| STR sduCtlDestinationPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.4 | DisplayString | read-only | SCSI sidk unit's controller destination identification name. |
| INT sduCtlStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.5 | INTEGER | read-only | SCSI disk unit's controller status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| INT sduCtlBusType | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.6 | INTEGER | read-only | Bus type of the SCSI disk unit's controller. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| INT sduCtlSegment | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.7 | INTEGER | read-only | Segment number of the SCSI disk unit's controller. |
| INT sduCtlBusNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.8 | INTEGER | read-only | Bus number of the SCSI disk unit's controller. |
| INT sduCtlDeviceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.9 | INTEGER | read-only | Device number of the SCSI disk unit's controller. |
| INT sduCtlFunction | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.2.1.10 | INTEGER | read-only | Function number of the SCSI disk unit's controller. |
| sduFanTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.3 | not-accessible | Table with fan of SCSI disk unit information. | |
| sduFanEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.3.1 | not-accessible | ||
| INT sduFanSDUNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.3.1.1 | INTEGER | read-only | SCSI disk unit identification number.(index) |
| INT sduFanFanNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.3.1.2 | INTEGER | read-only | Fan of SCSI disk unit identification number.(index) |
| STR sduFanPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.3.1.3 | DisplayString | read-only | Fan of SCSI disk unit identification name. |
| INT sduFanStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.3.1.4 | INTEGER | read-only | Fan of SCSI disk unit status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| sduPsuTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.4 | not-accessible | Table with power supply unit of SCSI disk unit information. | |
| sduPsuEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.4.1 | not-accessible | ||
| INT sduPsuSDUNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.4.1.1 | INTEGER | read-only | SCSI disk unit identification number.(index) |
| INT sduPsuPsuNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.4.1.2 | INTEGER | read-only | Power supply unit of SCSI disk unit identification number.(index) |
| STR sduPsuPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.4.1.3 | DisplayString | read-only | Power supply unit of SCSI disk unit identification name. |
| INT sduPsuStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.8.4.1.4 | INTEGER | read-only | Power supply unit of SCSI disk unit status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| otherBoardInfo | 1.3.6.1.4.1.211.1.31.1.2.100.1.9 | |||
| pciboxTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.1 | not-accessible | Table with PCI-Box information. | |
| pciboxEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.1.1 | not-accessible | ||
| INT pciboxNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.1.1.1 | INTEGER | read-only | PCI-Box identification number.(index) |
| STR pciboxPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.1.1.2 | DisplayString | read-only | PCI-Box identification name. |
| STR pciboxModelNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.1.1.3 | DisplayString | read-only | PCI-Box model name. |
| STR pciboxSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.1.1.4 | DisplayString | read-only | PCI-Box serial number. |
| pciboxSlotTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.2 | not-accessible | Table with PCI-Box slots information. | |
| pciboxSlotEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.2.1 | not-accessible | ||
| INT pbSlotPciboxNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.2.1.1 | INTEGER | read-only | PCI-Box identification number.(index:0 based) |
| INT pbSlotSlotNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.2.1.2 | INTEGER | read-only | PCI-Box slot identification number.(index:0 based) |
| INT pbSlotPresentStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.2.1.3 | INTEGER | read-only | PCI-Box slot present status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 unknown 0x00010000 |
| INT pbSlotPowerStatus | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.2.1.4 | INTEGER | read-only | PCI-Box slot power status. Status Value power-on 0 power-off 1 |
| gspbTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.3 | not-accessible | Table with GSPB information. | |
| gspbEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.3.1 | not-accessible | ||
| INT gspbNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.3.1.1 | INTEGER | read-only | GSPB identification number.(index:0 based) |
| STR gspbPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.3.1.2 | DisplayString | read-only | GSPB identification name. |
| STR gspbModelNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.3.1.3 | DisplayString | read-only | GSPB model name. |
| STR gspbSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.3.1.4 | DisplayString | read-only | GSPB serial number. |
| sasuTable | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.4 | not-accessible | Table with SAS-Unit information. | |
| sasuEntry | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.4.1 | not-accessible | ||
| INT sasuNumber | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.4.1.1 | INTEGER | read-only | SAS-Unit identification number.(index:0 based) |
| STR sasuPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.4.1.2 | DisplayString | read-only | SAS-Unit identification name. |
| STR sasuModelNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.4.1.3 | DisplayString | read-only | SAS-Unit model name. |
| STR sasuSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.1.9.4.1.4 | DisplayString | read-only | SAS-Unit serial number. |
| logicalComponentForLinux | 1.3.6.1.4.1.211.1.31.1.2.100.2 | |||
| logicalComponentForWindows | 1.3.6.1.4.1.211.1.31.1.2.100.3 | |||
| monitoringFunction | 1.3.6.1.4.1.211.1.31.1.2.100.4 | |||
| thresholdFunction | 1.3.6.1.4.1.211.1.31.1.2.100.5 | |||
| thresholdActionInfo | 1.3.6.1.4.1.211.1.31.1.2.100.5.1 | |||
| INT thrActionPolicySetting | 1.3.6.1.4.1.211.1.31.1.2.100.5.1.1 | INTEGER | read-write | Threshold exceeded action. (bit field) Action Bit LOG 0x00000001 TRAP 0x0000000c MAIL 0x00000010 EXPORT 0x00000040 |
| statusFunction | 1.3.6.1.4.1.211.1.31.1.2.100.6 | |||
| physCompStatus | 1.3.6.1.4.1.211.1.31.1.2.100.6.1 | |||
| INT cpuParTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.6.1.1 | INTEGER | read-only | CPU total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT memoryParTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.6.1.2 | INTEGER | read-only | Memory module total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT pciFuncParTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.6.1.3 | INTEGER | read-only | Pci device total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| INT systemBoardParTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.6.1.4 | INTEGER | read-only | System board total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT ioBoardParTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.6.1.5 | INTEGER | read-only | I/O board total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest. |
| INT scsiDevParTotalStatus | 1.3.6.1.4.1.211.1.31.1.2.100.6.1.6 | INTEGER | read-only | Scsi device total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 |
| otherFunction | 1.3.6.1.4.1.211.1.31.1.2.100.7 | |||
| securityInfo | 1.3.6.1.4.1.211.1.31.1.2.100.7.1 | |||
| agentInfo | 1.3.6.1.4.1.211.1.31.1.2.100.7.2 | |||
| STR agentVersion | 1.3.6.1.4.1.211.1.31.1.2.100.7.2.1 | DisplayString | read-only | PrimeQuest Server Agent's(PSA) version string. |
| STR psaFilterVersion | 1.3.6.1.4.1.211.1.31.1.2.100.7.2.2 | DisplayString | read-only | PSA eventlog filter version string. (e.g. VERSION=1; LEVEL=1; PTF-NO=1 --> 01010001) |
| diskSmartInfo | 1.3.6.1.4.1.211.1.31.1.2.100.7.3 | |||
| INT diskSMARTMonitoring | 1.3.6.1.4.1.211.1.31.1.2.100.7.3.1 | INTEGER | read-write | Disk SMART monitoring switch. Refer to the following definitions; value contens 0 enable 1 diabable 2 not-available |
| watchdogInfo | 1.3.6.1.4.1.211.1.31.1.2.100.7.4 | |||
| INT osWatchdogEnable | 1.3.6.1.4.1.211.1.31.1.2.100.7.4.1 | INTEGER | read-write | OS watchdog monitoring switch. It is necessary to set the 'osWatchdogTimeout' object before setting this object. Refer to the following definitions; value contens 0 off 1 on |
| INT osWatchdogTimeout | 1.3.6.1.4.1.211.1.31.1.2.100.7.4.2 | INTEGER | read-write | Set the OS watchdog timeout period (unit:sec) |
| INT osWatchdogReaction | 1.3.6.1.4.1.211.1.31.1.2.100.7.4.3 | INTEGER | read-write | OS watchdog timeout action. Refer to the following definitions; value contens 0 none-action 1 hardware-reset 2 power-down 3 power-cycle 4 init |
| INT bootWatchdogEnable | 1.3.6.1.4.1.211.1.31.1.2.100.7.4.4 | INTEGER | read-write | Boot watchdog monitoring switch. It is necessary to set the 'bootWatchdogTimeout' object before setting this object. Refer to the following definitions; value contens 0 off 1 on |
| INT bootWwatchdogTimeout | 1.3.6.1.4.1.211.1.31.1.2.100.7.4.5 | INTEGER | read-write | Set the boot watchdog timeout period (unit:sec) |
| partitionManagementInfo | 1.3.6.1.4.1.211.1.31.1.2.100.7.5 | |||
| INT usingOperatingSystem | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.1 | INTEGER | read-only | Operating system used with this partition. Refer to the following definitioins; value contens 0 linux 1 windows |
| STR partitionName | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.2 | DisplayString | read-only | Partition name. |
| STR hostName | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.3 | DisplayString | read-only | Host name of the server. This value is written to the network configuration file. |
| STR fujitsuChassisSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.4 | DisplayString | read-only | Chassis identification number. |
| STR modelNumber | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.5 | DisplayString | read-only | Model number. |
| INT partitionID | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.6 | INTEGER | read-only | Partition Identification number. |
| OCT partitionManagementAddress | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.7 | OCTET STRING | read-only | SNMP manager can access to the Partition directly with this IP address. |
| STR fscChassisSerialNo | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.8 | DisplayString | read-only | FSCs identification number. |
| OCT mmbManagementAddress | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.9 | OCTET STRING | read-only | SNMP manager can access to the Management board with this IP address. |
| STR partitionManagementAddress2 | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.10 | DisplayString | read-only | SNMP manager can access to the Partition directly with this IP address. Please use this object instead of 'partitionManagementAddress'. |
| STR mmbManagementAddress2 | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.11 | DisplayString | read-only | SNMP manager can access to the Management board with this IP address. Please use this object instead of 'mmbManagementAddress'. |
| STR modelName | 1.3.6.1.4.1.211.1.31.1.2.100.7.5.12 | DisplayString | read-only | Chasis model name.(ex: PRIMEQUEST 580) |
| pxFunction | 1.3.6.1.4.1.211.1.31.1.2.100.8 | |||
| managementInfo | 1.3.6.1.4.1.211.1.31.1.2.100.8.1 | |||
| INT pxInstallationStatus | 1.3.6.1.4.1.211.1.31.1.2.100.8.1.1 | INTEGER | read-only |
RFC description
Fujitsu PRIMEQUEST system management MIB for partition physical and logical component monitoring.
Start monitoring Fujitsu PRIMEQUEST server partition (ESMPRO ServerAgent common base, physical CPU inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.