PSA-COM-MIB DEFINITIONS ::= BEGIN --PRIMEQUEST system management MIB for Partition -- -- --$Copyright$ --Copyright Fujitsu Limited 2003 - 2009 --All rights reserved -- -- --MIB Revision: 02000000 -- IMPORTS OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 mib-2, DisplayString, PhysAddress FROM RFC1213-MIB TimeTicks, Counter, Gauge, IpAddress, mgmt, enterprises FROM RFC1155-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB; --enterprises OBJECT IDENTIFIER ::={ iso org(3) dod(6) internet(1) private(4) 1 } -- --PRIMEQUEST system management MIB nodes --fujitsu: 1.3.6.1.4.1.211 -- products: 1.3.6.1.4.1.211.1 -- iaServer: 1.3.6.1.4.1.211.1.31 -- primequest: 1.3.6.1.4.1.211.1.31.1 -- partition: 1.3.6.1.4.1.211.1.31.1.2 -- partitionCommon: 1.3.6.1.4.1.211.1.31.1.2.100 -- --FUJITSU PRIMEQUEST system management MIB nodes for Partition fujitsu OBJECT IDENTIFIER ::={ enterprises 211 } products OBJECT IDENTIFIER ::={ fujitsu 1 } iaServer OBJECT IDENTIFIER ::={ products 31 } primequest OBJECT IDENTIFIER ::={ iaServer 1 } partition OBJECT IDENTIFIER ::={ primequest 2 } partitionCommon OBJECT IDENTIFIER ::={ partition 100 } physicalComponent OBJECT IDENTIFIER ::={ partitionCommon 1 } logicalComponentForLinux OBJECT IDENTIFIER ::={ partitionCommon 2 } logicalComponentForWindows OBJECT IDENTIFIER ::={ partitionCommon 3 } monitoringFunction OBJECT IDENTIFIER ::={ partitionCommon 4 } thresholdFunction OBJECT IDENTIFIER ::={ partitionCommon 5 } statusFunction OBJECT IDENTIFIER ::={ partitionCommon 6 } otherFunction OBJECT IDENTIFIER ::={ partitionCommon 7 } pxFunction OBJECT IDENTIFIER ::={ partitionCommon 8 } --FUJITSU PRIMEQUEST system management MIB objects for Partition --physicalComponent-MIB groups physicalCpuInfo OBJECT IDENTIFIER ::={ physicalComponent 1 } memoryModuleInfo OBJECT IDENTIFIER ::={ physicalComponent 2 } hddInfo OBJECT IDENTIFIER ::={ physicalComponent 3 } nicInfo OBJECT IDENTIFIER ::={ physicalComponent 4 } pciFunctionInfo OBJECT IDENTIFIER ::={ physicalComponent 5 } systemBoardInfo OBJECT IDENTIFIER ::={ physicalComponent 6 } iobInfo OBJECT IDENTIFIER ::={ physicalComponent 7 } sduInfo OBJECT IDENTIFIER ::={ physicalComponent 8 } otherBoardInfo OBJECT IDENTIFIER ::={ physicalComponent 9 } -- **************************************************************************** -- -- GROUP: physicalCpuInfo -- -- physicalCpuInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.1 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: physicalCpuTable -- -- physicalCpuTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.1.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- physicalCpuTable OBJECT-TYPE SYNTAX SEQUENCE OF PhysicalCpu ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with physical CPU information" ::= { physicalCpuInfo 1 } physicalCpuEntry OBJECT-TYPE SYNTAX PhysicalCpu ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { phCpuSBNumber, phCpuNumber } ::= { physicalCpuTable 1 } PhysicalCpu ::= SEQUENCE { phCpuSBNumber INTEGER, phCpuNumber INTEGER, phCpuPhysicalID DisplayString, phCpuStatus INTEGER, phCpuPredictedStatus INTEGER, phCpuPresentStatus INTEGER, phCpuType DisplayString, phCpuStep DisplayString, phCpuCacheL3Size INTEGER, phCpuCorrectableErrors Counter, phCpuSpeed INTEGER, phCpuNumOfLogicalCpu INTEGER, phCpuModelName DisplayString } phCpuSBNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SystemBoard identification number that the CPU belongs.(index: 0 based)" ::= { physicalCpuEntry 1 } phCpuNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU identification number.(index: 0 based)" ::= { physicalCpuEntry 2 } phCpuPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "CPU identification name.(e.g. SB#1-CPU#A0)" ::= { physicalCpuEntry 3 } phCpuStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU total status. (Bit field); deprecated: PSA-2.0.0 or later does not support this objest. Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { physicalCpuEntry 4 } phCpuPredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { physicalCpuEntry 5 } phCpuPresentStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU present status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 degraded 0x00040000 unknown 0x00010000" ::= { physicalCpuEntry 6 } phCpuType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "CPU type.(e.g. Itanium2 etc...) deprecated: PSA-2.0.0 or later does not support this objest. refer to the 'phCpuModelName' instead of this object." ::= { physicalCpuEntry 7 } phCpuStep OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "CPU step(revision). This object shows CPU Info value (hex) in PSA-2.0.0 or later." ::= { physicalCpuEntry 8 } phCpuCacheL3Size OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU cache L3 size.(unit:Kbyte)" ::= { physicalCpuEntry 9 } phCpuCorrectableErrors OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of CPU correctable errors. Set the value 0 if you want to reset the CPU error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { physicalCpuEntry 10 } phCpuSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU speed(unit:MHz)." ::= { physicalCpuEntry 11 } phCpuNumOfLogicalCpu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of logical CPUs in this physical CPU; NOSUPPORT." ::= { physicalCpuEntry 12 } phCpuModelName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "CPU model name.(e.g. Intel(R) Itanium(R) 2 Processor etc...)" ::= { physicalCpuEntry 13 } numOfEffectiveCpus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of effective CPUs in the partition." ::= { physicalCpuInfo 2 } numOfEffectiveSockets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of effective sockets in the partition." ::= { physicalCpuInfo 3 } -- **************************************************************************** -- -- GROUP: memoryModuleInfo -- -- memoryModuleInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.2 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: memoryModuleTable -- -- memoryModuleTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.2.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- memoryModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF MemoryModule ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with memory module information" ::= { memoryModuleInfo 1 } memoryModuleEntry OBJECT-TYPE SYNTAX MemoryModule ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { memMdSBNumber, memMdNumber } ::= { memoryModuleTable 1 } MemoryModule ::= SEQUENCE { memMdSBNumber INTEGER, memMdNumber INTEGER, memMdPhysicalID DisplayString, memMdStatus INTEGER, memMdPredictedStatus INTEGER, memMdPresentStatus INTEGER, memMdPartNo DisplayString, memMdSerialNo DisplayString, memMdSize INTEGER, memMdBank INTEGER, memMdCorrectableErrors Counter, memMdAccessSpeed INTEGER, memMd2bitCorrectableErrors Counter, memMd2bitPredictedStatus INTEGER, memMdRank INTEGER } memMdSBNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SystemBoard identification number that the MemoryModule belongs.(index: 0 based)" ::= { memoryModuleEntry 1 } memMdNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module identification number." ::= { memoryModuleEntry 2 } memMdPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Memory module identification name." ::= { memoryModuleEntry 3 } memMdStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module total status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { memoryModuleEntry 4 } memMdPredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module 1bit error predicted status.(Bit filed) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { memoryModuleEntry 5 } memMdPresentStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module present status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 degraded 0x00040000 unknown 0x00010000" ::= { memoryModuleEntry 6 } memMdPartNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Memory module type." ::= { memoryModuleEntry 7 } memMdSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { memoryModuleEntry 8 } memMdSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module size.(unit:Mbyte)" ::= { memoryModuleEntry 9 } memMdBank OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module bank number. This object is valid in PRIMEQUEST400/500/500A serise." ::= { memoryModuleEntry 10 } memMdCorrectableErrors OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of Memory module correctable errors(1bit). Set the value 0 if you want to reset the Memory module error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { memoryModuleEntry 11 } memMdAccessSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module access speed." ::= { memoryModuleEntry 12 } memMd2bitCorrectableErrors OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of Memory module correctable errors(2bit). Set the value 0 if you want to reset the Memory module error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { memoryModuleEntry 13 } memMd2bitPredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module 2bit error predicted status.(Bit filed) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { memoryModuleEntry 14 } memMdRank OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module rank number." ::= { memoryModuleEntry 15 } -- **************************************************************************** -- -- GROUP: hddInfo -- -- hddInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.3 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: scsiDeviceTable -- -- scsiDeviceTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.3.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- scsiDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiDevice ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with SCSI device information" ::= { hddInfo 1 } scsiDeviceEntry OBJECT-TYPE SYNTAX ScsiDevice ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { scsiDevBusType, scsiDevSegment, scsiDevBusNumber, scsiDevDeviceNumber, scsiDevFunction, scsiDevChannel, scsiDevScsiId, scsiDevLUN } ::= { scsiDeviceTable 1 } ScsiDevice ::= SEQUENCE { scsiDevBusType INTEGER, scsiDevSegment INTEGER, scsiDevBusNumber INTEGER, scsiDevDeviceNumber INTEGER, scsiDevFunction INTEGER, scsiDevChannel INTEGER, scsiDevScsiId INTEGER, scsiDevLUN INTEGER, scsiDevPhysicalID DisplayString, scsiDevTotalStatus INTEGER, scsiDevSMARTStatus INTEGER, scsiDevStatus INTEGER, scsiDevName DisplayString, scsiDevType INTEGER, scsiDevVendor DisplayString, scsiDevHostNo INTEGER, scsiDevCapacity INTEGER, scsiDevSector INTEGER, scsiDevCylinder INTEGER, scsiDevBlockSize INTEGER, scsiDevSectorSize INTEGER, scsiDevSerialNo DisplayString, scsiDevRevision DisplayString, scsiDevSpecialFile DisplayString, scsiDevDiskName DisplayString } scsiDevBusType OBJECT-TYPE SYNTAX INTEGER{ other(0), isa(1), eisa(2), pci(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Bus type of the SCSI device." ::= { scsiDeviceEntry 1 } scsiDevSegment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Segment number of the SCSI device." ::= { scsiDeviceEntry 2 } scsiDevBusNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus number of the SCSI device." ::= { scsiDeviceEntry 3 } scsiDevDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Device number of the SCSI device." ::= { scsiDeviceEntry 4 } scsiDevFunction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Function number of the SCSI device." ::= { scsiDeviceEntry 5 } scsiDevChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Channel number of the SCSI device." ::= { scsiDeviceEntry 6 } scsiDevScsiId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI target identification number of the SCSI device." ::= { scsiDeviceEntry 7 } scsiDevLUN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Logical Unit Number of the SCSI device." ::= { scsiDeviceEntry 8 } scsiDevPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device identification name." ::= { scsiDeviceEntry 9 } scsiDevTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device total status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { scsiDeviceEntry 10 } scsiDevSMARTStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Memory module predicted status.(Bit filed) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000" ::= { scsiDeviceEntry 11 } scsiDevStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SCSI device status.(Bit field) Status Bit ok 0x00000000 error 0x01000000 warning 0x00100000 unknown 0x00010000" ::= { scsiDeviceEntry 12 } scsiDevName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Symbolic name of the SCSI device." ::= { scsiDeviceEntry 13 } scsiDevType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device type. Refer to the following definitions; value contens 0 directAccess 1 sequentialAccess 2 printer 3 processor 4 worm 5 cdRom 6 scanner 7 opticalDevice 8 mediumChanger 9 communications 10-13 unknown 100 directAccess-softmirror by Fujitsu's GDS(Linux) or PSDM(Windows) driver." ::= { scsiDeviceEntry 14 } scsiDevVendor OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device vendor name." ::= { scsiDeviceEntry 15 } scsiDevHostNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI controller host number." ::= { scsiDeviceEntry 16 } scsiDevCapacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total capacity of the SCSI device(unit:Mbyte)." ::= { scsiDeviceEntry 17 } scsiDevSector OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device number of sector." ::= { scsiDeviceEntry 18 } scsiDevCylinder OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cylinder of the SCSI device." ::= { scsiDeviceEntry 19 } scsiDevBlockSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device block size(unit:byte); NOSUPPORT." ::= { scsiDeviceEntry 20 } scsiDevSectorSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device sector size.(unit:byte)" ::= { scsiDeviceEntry 21 } scsiDevSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device serial number." ::= { scsiDeviceEntry 22 } scsiDevRevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device revision." ::= { scsiDeviceEntry 23 } scsiDevSpecialFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device special file name." ::= { scsiDeviceEntry 24 } scsiDevDiskName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI device disk name.(e.g. Disk 0); This object supports only information on the Windows partition." ::= { scsiDeviceEntry 25 } -- ---------------------------------------------------------------------------- -- TABLE: diskSliceTable -- -- diskSliceTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.3.2 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- diskSliceTable OBJECT-TYPE SYNTAX SEQUENCE OF DiskSlice ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with disk slice information; This table supports only information on the Linux partition." ::= { hddInfo 2 } diskSliceEntry OBJECT-TYPE SYNTAX DiskSlice ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { dsBusType, dsSegment, dsBusNumber, dsDeviceNumber, dsFunction, dsChannel, dsScsiId, dsLUN, dsSliceNumber } ::= { diskSliceTable 1 } DiskSlice ::= SEQUENCE { dsBusType INTEGER, dsSegment INTEGER, dsBusNumber INTEGER, dsDeviceNumber INTEGER, dsFunction INTEGER, dsChannel INTEGER, dsScsiId INTEGER, dsLUN INTEGER, dsSliceNumber INTEGER, dsDeviceSpecialFile DisplayString, dsOffset INTEGER, dsFileSystemType DisplayString, dsCapacity INTEGER } dsBusType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus type of the disk slice. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci" ::= { diskSliceEntry 1 } dsSegment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Segment number of the disk slice." ::= { diskSliceEntry 2 } dsBusNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus number of the disk slice." ::= { diskSliceEntry 3 } dsDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Device number of the disk slice." ::= { diskSliceEntry 4 } dsFunction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Function number of the disk slice." ::= { diskSliceEntry 5 } dsChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Channel number of the disk slice." ::= { diskSliceEntry 6 } dsScsiId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI target identification number of the disk slice." ::= { diskSliceEntry 7 } dsLUN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Logical Unit Number of the disk slice." ::= { diskSliceEntry 8 } dsSliceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Disk slice identification number." ::= { diskSliceEntry 9 } dsDeviceSpecialFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Device special file name of the disk slice." ::= { diskSliceEntry 10 } dsOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Offset of the disk slice.(unit:Mbyte)" ::= { diskSliceEntry 11 } dsFileSystemType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "File system type of the disk slice." ::= { diskSliceEntry 12 } dsCapacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Capacity of the disk slice.(unit:Mbyte)" ::= { diskSliceEntry 13 } -- **************************************************************************** -- -- GROUP: nicInfo -- -- nicInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.4 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: nicTable -- -- nicTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.4.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- nicTable OBJECT-TYPE SYNTAX SEQUENCE OF Nic ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { nicInfo 1 } nicEntry OBJECT-TYPE SYNTAX Nic ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { nicBusType, nicSegment, nicBusNumber, nicDeviceNumber, nicFunction } ::= { nicTable 1 } Nic ::= SEQUENCE { nicBusType INTEGER, nicSegment INTEGER, nicBusNumber INTEGER, nicDeviceNumber INTEGER, nicFunction INTEGER, nicMACAddress PhysAddress, nicSpeed INTEGER, nicTransmissionTotalPacket Counter, nicTransmissionTotalByte Counter, nicDeferredXmits Counter, nicSingleCollisions Counter, nicMultipleCollisions Counter, nicExcessiveCollisions Counter, nicCarrierSenceErrors Counter, nicLateCollisionErrors Counter, nicSQETestErrors Counter, nicMACXmitsErrors Counter, nicReceiveTotalPacket Counter, nicReceiveTotalByte Counter, nicFCSErrors Counter, nicAlignmentErrors Counter, nicFrameTooLong Counter, nicMACReceiveErrors Counter } nicBusType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus type of the network interface card.. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci" ::= { nicEntry 1 } nicSegment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Segment number of the network interface card." ::= { nicEntry 2 } nicBusNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus number of the network interface card." ::= { nicEntry 3 } nicDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Device number of the network interface card." ::= { nicEntry 4 } nicFunction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Function number of the network interface card." ::= { nicEntry 5 } nicMACAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The interface address of the physical layer of the network interface card." ::= { nicEntry 6 } nicSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Ratings speed of network interface card.(unit:Mbit/s)" ::= { nicEntry 7 } nicTransmissionTotalPacket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address; including those that were discarded or not sent." ::= { nicEntry 8 } nicTransmissionTotalByte OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of the interface; including framing characters." ::= { nicEntry 9 } nicDeferredXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy." ::= { nicEntry 10 } nicSingleCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision." ::= { nicEntry 11 } nicMultipleCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision." ::= { nicEntry 12 } nicExcessiveCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which transmission on a particular interface fails due to excessive collisions." ::= { nicEntry 13 } nicCarrierSenceErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface." ::= { nicEntry 14 } nicLateCollisionErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet." ::= { nicEntry 15 } nicSQETestErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document." ::= { nicEntry 16 } nicMACXmitsErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object; the dot3StatsExcessiveCollisions object; or the dot3StatsCarrierSenseErrors object." ::= { nicEntry 17 } nicReceiveTotalPacket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of subnetwork-unicast packets delivered to a higher-layer protocol." ::= { nicEntry 18 } nicReceiveTotalByte OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on the interface; including framing characters." ::= { nicEntry 19 } nicFCSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check." ::= { nicEntry 20 } nicAlignmentErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check." ::= { nicEntry 21 } nicFrameTooLong OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on a particular interface that exceed the maximum permitted frame size." ::= { nicEntry 22 } nicMACReceiveErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object; the dot3StatsAlignmentErrors object; or the dot3StatsFCSErrors object." ::= { nicEntry 23 } ipPacketIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object supports only information on the Linux partition." ::= { nicInfo 2 } ipPacketOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object supports only information on the Linux partition." ::= { nicInfo 3 } -- **************************************************************************** -- -- GROUP: pciFunctionInfo -- -- pciFunctionInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.5 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: pciFunctionTable -- -- pciFunctionTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.5.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- pciFunctionTable OBJECT-TYPE SYNTAX SEQUENCE OF PciFunction ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { pciFunctionInfo 1 } pciFunctionEntry OBJECT-TYPE SYNTAX PciFunction ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { pciFuncBusType, pciFuncSegment, pciFuncBusNumber, pciFuncDeviceNumber, pciFuncFunction } ::= { pciFunctionTable 1 } PciFunction ::= SEQUENCE { pciFuncBusType INTEGER, pciFuncSegment INTEGER, pciFuncBusNumber INTEGER, pciFuncDeviceNumber INTEGER, pciFuncFunction INTEGER, pciFuncPhysicalID DisplayString, pciFuncTotalStatus INTEGER, pciFuncStatus INTEGER, pciFuncAdapterModel DisplayString, pciFuncClass OCTET STRING, pciFuncVendor DisplayString, pciFuncRevision DisplayString, pciDeviceName DisplayString, pciFuncWWN DisplayString, pciFuncVPDPN DisplayString, pciFuncConnIOU INTEGER, pciFuncDivSide INTEGER } pciFuncBusType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus type of the pci device.. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci" ::= { pciFunctionEntry 1 } pciFuncSegment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Segment number of the pci device." ::= { pciFunctionEntry 2 } pciFuncBusNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus number of the pci device." ::= { pciFunctionEntry 3 } pciFuncDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Device number of the pci device." ::= { pciFunctionEntry 4 } pciFuncFunction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Function number of the pci device." ::= { pciFunctionEntry 5 } pciFuncPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Pci device identification name." ::= { pciFunctionEntry 6 } pciFuncTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Pci device total status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { pciFunctionEntry 7 } pciFuncStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Pci Function status.(Bit field) Status Bit ok 0x00000000 error 0x01000000 warning 0x00100000 unknown 0x00010000" ::= { pciFunctionEntry 9 } pciFuncAdapterModel OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Pci device model id." ::= { pciFunctionEntry 10 } pciFuncClass OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Device classification; according to the PCI classification scheme. Bbyte Contents 0 BaseClass 1 SubClass 2 ProgIf" ::= { pciFunctionEntry 11 } pciFuncVendor OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PCI card vendor id." ::= { pciFunctionEntry 12 } pciFuncRevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PCI card revision." ::= { pciFunctionEntry 13 } pciDeviceName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PCI device name string. [vendor name + device name]." ::= { pciFunctionEntry 14 } pciFuncWWN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PCI card WWN(World Wide Name) information." ::= { pciFunctionEntry 15 } pciFuncVPDPN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PCI card VPD PN information; deprecated: PSA-2.0.0 or later does not support this objest." ::= { pciFunctionEntry 16 } pciFuncConnIOU OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IOU number which PCI card connected; deprecated: PSA-2.0.0 or later does not support this objest." ::= { pciFunctionEntry 17 } pciFuncDivSide OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PCI card divide side; deprecated: PSA-2.0.0 or later does not support this objest. 1=no-divided; 2=IOU_A side; 3=IOU_B side" ::= { pciFunctionEntry 18 } -- **************************************************************************** -- -- GROUP: systemBoardInfo -- -- systemBoardInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.6 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: systemBoardTable -- -- systemBoardTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.6.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- systemBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemBoard ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { systemBoardInfo 1 } systemBoardEntry OBJECT-TYPE SYNTAX SystemBoard ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { sbSBNumber } ::= { systemBoardTable 1 } SystemBoard ::= SEQUENCE { sbSBNumber INTEGER, sbPhysicalID DisplayString, sbTotalStatus INTEGER, sbCSFLNPredictedStatus INTEGER, sbCSLDX0PredictedStatus INTEGER, sbCSLDX1PredictedStatus INTEGER, sbCSLDX2PredictedStatus INTEGER, sbCSLDX3PredictedStatus INTEGER, sbType INTEGER, sbModel DisplayString, sbSerialNo DisplayString, sbNumOfEffectiveCpus INTEGER, sbNumOfEffectiveSockets INTEGER, sbNumOfEffectiveMemModules INTEGER, sbNumOfEffectiveMemSlots INTEGER, sbCSFLNErrorCount Counter, sbCSLDX0ErrorCount Counter, sbCSLDX1ErrorCount Counter, sbCSLDX2ErrorCount Counter, sbCSLDX3ErrorCount Counter, sbEntityStatus INTEGER, sbFLNGAC0PredictedStatus INTEGER, sbFLNGAC1PredictedStatus INTEGER, sbLDX0GDX0PredictedStatus INTEGER, sbLDX1GDX1PredictedStatus INTEGER, sbLDX2GDX2PredictedStatus INTEGER, sbLDX3GDX3PredictedStatus INTEGER, sbFLNGAC0ErrorCount Counter, sbFLNGAC1ErrorCount Counter, sbLDX0GDX0ErrorCount Counter, sbLDX1GDX1ErrorCount Counter, sbLDX2GDX2ErrorCount Counter, sbLDX3GDX3ErrorCount Counter, sbLDX1GDX0PredictedStatus INTEGER, sbLDX2GDX1PredictedStatus INTEGER, sbLDX3GDX1PredictedStatus INTEGER, sbLDX1GDX0ErrorCount Counter, sbLDX2GDX1ErrorCount Counter, sbLDX3GDX1ErrorCount Counter } sbSBNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "System board identification number.(index:0 based)" ::= { systemBoardEntry 1 } sbPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System board identification name." ::= { systemBoardEntry 2 } sbTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "System board total status.(Bit field); deprecated: PSA-2.0.0 or later does not support this objest. Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { systemBoardEntry 3 } sbCSFLNPredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "System board FLN predicted status.(Bit field); deprecated: PSA-2.0.0 or later does not support this objest. Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000" ::= { systemBoardEntry 4 } sbCSLDX0PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "System board LDX#0 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 5 } sbCSLDX1PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "System board LDX#1 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 6 } sbCSLDX2PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "System board LDX#2 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 7 } sbCSLDX3PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "System board LDX#3 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 8 } sbType OBJECT-TYPE SYNTAX INTEGER{ normal(1), master0(2), master1(3) } ACCESS read-only STATUS mandatory DESCRIPTION "System board type." ::= { systemBoardEntry 9 } sbModel OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System board model name." ::= { systemBoardEntry 10 } sbSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System board serial number." ::= { systemBoardEntry 11 } sbNumOfEffectiveCpus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of effective CPUs on system board." ::= { systemBoardEntry 12 } sbNumOfEffectiveSockets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of effective sockets on system board." ::= { systemBoardEntry 13 } sbNumOfEffectiveMemModules OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of effective memory modules on system board." ::= { systemBoardEntry 14 } sbNumOfEffectiveMemSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of effective memory slots on system board." ::= { systemBoardEntry 15 } sbCSFLNErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of FLN correctable errors. Set the value 0 if you want to reset the FLN error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 16 } sbCSLDX0ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of LDX#0 correctable errors. Set the value 0 if you want to reset the LDX#0 error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 17 } sbCSLDX1ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of LDX#1 correctable errors. Set the value 0 if you want to reset the LDX#1 error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 18 } sbCSLDX2ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of LDX#2 correctable errors. Set the value 0 if you want to reset the LDX#2 error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 19 } sbCSLDX3ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of LDX#3 correctable errors. Set the value 0 if you want to reset the LDX#3 error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 20 } sbEntityStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Only System board's total status. This status doesn't include CPU and Memory status which is mounted the System board.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 21 } sbFLNGAC0PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between FLN and GAC#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 22 } sbFLNGAC1PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between FLN and GAC#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 23 } sbLDX0GDX0PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between LDX#0 and GDX#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 24 } sbLDX1GDX1PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between LDX#1 and GDX#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 25 } sbLDX2GDX2PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between LDX#2 and GDX#2.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 26 } sbLDX3GDX3PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between LDX#3 and GDX#3.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000" ::= { systemBoardEntry 27 } sbFLNGAC0ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between FLN and GAC#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 28 } sbFLNGAC1ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between FLN and GAC#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 29 } sbLDX0GDX0ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between LDX#0 and GDX#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 30 } sbLDX1GDX1ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between LDX#1 and GDX#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 31 } sbLDX2GDX2ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between LDX#2 and GDX#2. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 32 } sbLDX3GDX3ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between LDX#3 and GDX#3. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 33 } sbLDX1GDX0PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between LDX#1 and GDX#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 34 } sbLDX2GDX1PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between LDX#2 and GDX#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 35 } sbLDX3GDX1PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between LDX#3 and GDX#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 36 } sbLDX1GDX0ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between LDX#1 and GDX#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 37 } sbLDX2GDX1ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between LDX#2 and GDX#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 38 } sbLDX3GDX1ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between LDX#3 and GDX#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { systemBoardEntry 39 } -- **************************************************************************** -- -- GROUP: iobInfo -- -- iobInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.7 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: iobTable -- -- iobTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.7.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- iobTable OBJECT-TYPE SYNTAX SEQUENCE OF Iob ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with I/O board information. In the case of 'PRIMEQUEST 420'; Index 0 of this table shows the IOU information and index 1 of this table shows the IOX information." ::= { iobInfo 1 } iobEntry OBJECT-TYPE SYNTAX Iob ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { iobIOBNumber } ::= { iobTable 1 } Iob ::= SEQUENCE { iobIOBNumber INTEGER, iobPhysicalID DisplayString, iobTotalStatus INTEGER, iobCSFLIPredictedStatus INTEGER, iobCSFLP0PredictedStatus INTEGER, iobCSFLP1PredictedStatus INTEGER, iobType INTEGER, iobSerialNo DisplayString, iobModelNo DisplayString, iobCSFLIErrorCount Counter, iobCSFLP0ErrorCount Counter, iobCSFLP1ErrorCount Counter, iobFLIGDX0PredictedStatus INTEGER, iobFLIGDX1PredictedStatus INTEGER, iobFLIGDX2PredictedStatus INTEGER, iobFLIGDX3PredictedStatus INTEGER, iobFLIGAC0PredictedStatus INTEGER, iobFLIGAC1PredictedStatus INTEGER, iobFLIGDX0ErrorCount Counter, iobFLIGDX1ErrorCount Counter, iobFLIGDX2ErrorCount Counter, iobFLIGDX3ErrorCount Counter, iobFLIGAC0ErrorCount Counter, iobFLIGAC1ErrorCount Counter } iobIOBNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "I/O board identification number.(index:0 based)" ::= { iobEntry 1 } iobPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "I/O board identification name." ::= { iobEntry 2 } iobTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "I/O board total status.(Bit field); deprecated: PSA-2.0.0 or later does not support this objest. Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { iobEntry 3 } iobCSFLIPredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "I/Oboard FLI predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 4 } iobCSFLP0PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "I/Oboard FLP#0 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 5 } iobCSFLP1PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "I/Oboard FLP#1 predicted status.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 6 } iobType OBJECT-TYPE SYNTAX INTEGER{ normal(1), master0(2), master1(3) } ACCESS read-only STATUS mandatory DESCRIPTION "I/O board type; NOSUPPORT." ::= { iobEntry 7 } iobSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "I/O board serial number." ::= { iobEntry 8 } iobModelNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "I/O board model number." ::= { iobEntry 9 } iobCSFLIErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of FLI correctable errors. Set the value 0 if you want to reset the FLI error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 10 } iobCSFLP0ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of FLP#0 correctable errors. Set the value 0 if you want to reset the FLP#0 error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 11 } iobCSFLP1ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of FLP#1 correctable errors. Set the value 0 if you want to reset the FLP#1 error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 12 } iobFLIGDX0PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between FLI and GDX#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 13 } iobFLIGDX1PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between FLI and GDX#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 14 } iobFLIGDX2PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between FLI and GDX#2.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 15 } iobFLIGDX3PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between FLI and GDX#3.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 16 } iobFLIGAC0PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between FLI and GAC#0.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 17 } iobFLIGAC1PredictedStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Predicted status between FLI and GAC#1.(Bit field) Status Bit ok 0x00000000 warning 0x00100000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 18 } iobFLIGDX0ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between FLI and GDX#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 19 } iobFLIGDX1ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between FLI and GDX#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 20 } iobFLIGDX2ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between FLI and GDX#2. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 21 } iobFLIGDX3ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between FLI and GDX#3. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 22 } iobFLIGAC0ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between FLI and GAC#0. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 23 } iobFLIGAC1ErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of correctable errors between FLI and GAC#1. Set the value 0 if you want to reset the error count. deprecated: PSA-2.0.0 or later does not support this objest." ::= { iobEntry 24 } -- ---------------------------------------------------------------------------- -- TABLE: iobSlotTable -- -- iobSlotTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.7.2 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- iobSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF IobSlot ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with IOB PCI slots information." ::= { iobInfo 2 } iobSlotEntry OBJECT-TYPE SYNTAX IobSlot ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { iobSlotIOBNumber, iobSlotSlotNumber } ::= { iobSlotTable 1 } IobSlot ::= SEQUENCE { iobSlotIOBNumber INTEGER, iobSlotSlotNumber INTEGER, iobSlotPresentStatus INTEGER, iobSlotPowerStatus INTEGER } iobSlotIOBNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IOB PCI board identification number.(index:0 based)" ::= { iobSlotEntry 1 } iobSlotSlotNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IOB PCI slot identification number.(index:0 based)" ::= { iobSlotEntry 2 } iobSlotPresentStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IOB PCI slot present status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 unknown 0x00010000" ::= { iobSlotEntry 3 } iobSlotPowerStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IOB PCI slot power status. Status Value power-on 0 power-off 1" ::= { iobSlotEntry 4 } -- **************************************************************************** -- -- GROUP: sduInfo -- -- sduInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.8 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: sduTable -- -- sduTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.8.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- sduTable OBJECT-TYPE SYNTAX SEQUENCE OF Sdu ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with SCSI disk unit information." ::= { sduInfo 1 } sduEntry OBJECT-TYPE SYNTAX Sdu ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { sduNumber } ::= { sduTable 1 } Sdu ::= SEQUENCE { sduNumber INTEGER, sduPhysicalID DisplayString, sduTotalStatus INTEGER, sduStatusClear INTEGER, sduFANRedundancyStatus INTEGER , sduPSURedundancyStatus INTEGER, sduModelName DisplayString, sduFirmwareRevision DisplayString, sduLEDStatus INTEGER } sduNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit identification number.(index)" ::= { sduEntry 1 } sduPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit identification name." ::= { sduEntry 2 } sduTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit total status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { sduEntry 3 } sduStatusClear OBJECT-TYPE SYNTAX INTEGER{ clear(1) } ACCESS read-write STATUS mandatory DESCRIPTION "SCSI disk unit total status clear." ::= { sduEntry 4 } sduFANRedundancyStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fan in SCSI disk unit redundancy status. Status Value Redundant 1 Non-Redundant: Sufficient Resources 2 Non-Redundant: Insufficient Resources 3 Unknown 99" ::= { sduEntry 5 } sduPSURedundancyStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Power supply unit in SCSI disk unit redundancy status. Status Value Redundant 1 Non-Redundant: Sufficient Resources 2 Non-Redundant: Insufficient Resources 3 Unknown 99" ::= { sduEntry 6 } sduModelName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit model name.(e.g. PS10R...)" ::= { sduEntry 7 } sduFirmwareRevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit firmware revision.(e.g. 1.02...)" ::= { sduEntry 8 } sduLEDStatus OBJECT-TYPE SYNTAX INTEGER{ off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "SCSI disk unit LED status." ::= { sduEntry 9 } -- ---------------------------------------------------------------------------- -- TABLE: sduControllerTable -- -- sduControllerTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.8.2 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- sduControllerTable OBJECT-TYPE SYNTAX SEQUENCE OF SduController ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with SCSI disk unit's controller information." ::= { sduInfo 2 } sduControllerEntry OBJECT-TYPE SYNTAX SduController ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { sduCtlSDUNumber, sduCtlControllerNumber } ::= { sduControllerTable 1 } SduController ::= SEQUENCE { sduCtlSDUNumber INTEGER, sduCtlControllerNumber INTEGER, sduCtlPhysicalID DisplayString, sduCtlDestinationPhysicalID DisplayString, sduCtlStatus INTEGER, sduCtlBusType INTEGER, sduCtlSegment INTEGER, sduCtlBusNumber INTEGER, sduCtlDeviceNumber INTEGER, sduCtlFunction INTEGER } sduCtlSDUNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit identification number.(index)" ::= { sduControllerEntry 1 } sduCtlControllerNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit's controller number.(index)" ::= { sduControllerEntry 2 } sduCtlPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit's controller identification name." ::= { sduControllerEntry 3 } sduCtlDestinationPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SCSI sidk unit's controller destination identification name." ::= { sduControllerEntry 4 } sduCtlStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit's controller status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { sduControllerEntry 5 } sduCtlBusType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus type of the SCSI disk unit's controller. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci" ::= { sduControllerEntry 6 } sduCtlSegment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Segment number of the SCSI disk unit's controller." ::= { sduControllerEntry 7 } sduCtlBusNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bus number of the SCSI disk unit's controller." ::= { sduControllerEntry 8 } sduCtlDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Device number of the SCSI disk unit's controller." ::= { sduControllerEntry 9 } sduCtlFunction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Function number of the SCSI disk unit's controller." ::= { sduControllerEntry 10 } -- ---------------------------------------------------------------------------- -- TABLE: sduFanTable -- -- sduFanTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.8.3 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- sduFanTable OBJECT-TYPE SYNTAX SEQUENCE OF SduFan ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with fan of SCSI disk unit information." ::= { sduInfo 3 } sduFanEntry OBJECT-TYPE SYNTAX SduFan ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { sduFanSDUNumber, sduFanFanNumber } ::= { sduFanTable 1 } SduFan ::= SEQUENCE { sduFanSDUNumber INTEGER, sduFanFanNumber INTEGER, sduFanPhysicalID DisplayString, sduFanStatus INTEGER } sduFanSDUNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit identification number.(index)" ::= { sduFanEntry 1 } sduFanFanNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fan of SCSI disk unit identification number.(index)" ::= { sduFanEntry 2 } sduFanPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Fan of SCSI disk unit identification name." ::= { sduFanEntry 3 } sduFanStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fan of SCSI disk unit status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { sduFanEntry 4 } -- ---------------------------------------------------------------------------- -- TABLE: sduPsuTable -- -- sduPsuTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.8.4 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- sduPsuTable OBJECT-TYPE SYNTAX SEQUENCE OF SduPsu ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with power supply unit of SCSI disk unit information." ::= { sduInfo 4 } sduPsuEntry OBJECT-TYPE SYNTAX SduPsu ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { sduPsuSDUNumber, sduPsuPsuNumber } ::= { sduPsuTable 1 } SduPsu ::= SEQUENCE { sduPsuSDUNumber INTEGER, sduPsuPsuNumber INTEGER, sduPsuPhysicalID DisplayString, sduPsuStatus INTEGER } sduPsuSDUNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SCSI disk unit identification number.(index)" ::= { sduPsuEntry 1 } sduPsuPsuNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Power supply unit of SCSI disk unit identification number.(index)" ::= { sduPsuEntry 2 } sduPsuPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Power supply unit of SCSI disk unit identification name." ::= { sduPsuEntry 3 } sduPsuStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Power supply unit of SCSI disk unit status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { sduPsuEntry 4 } -- **************************************************************************** -- -- GROUP: otherBoardInfo -- -- otherBoardInfo : .1.3.6.1.4.1.211.1.31.1.2.100.1.9 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- ---------------------------------------------------------------------------- -- TABLE: pciboxTable -- -- pciboxTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.9.1 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- pciboxTable OBJECT-TYPE SYNTAX SEQUENCE OF Pcibox ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with PCI-Box information." ::= { otherBoardInfo 1 } pciboxEntry OBJECT-TYPE SYNTAX Pcibox ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { pciboxNumber } ::= { pciboxTable 1 } Pcibox ::= SEQUENCE { pciboxNumber INTEGER, pciboxPhysicalID DisplayString, pciboxModelNo DisplayString, pciboxSerialNo DisplayString } pciboxNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PCI-Box identification number.(index)" ::= { pciboxEntry 1 } pciboxPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PCI-Box identification name." ::= { pciboxEntry 2 } pciboxModelNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PCI-Box model name." ::= { pciboxEntry 3 } pciboxSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PCI-Box serial number." ::= { pciboxEntry 4 } -- ---------------------------------------------------------------------------- -- TABLE: pciboxSlotTable -- -- pciboxSlotTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.9.2 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- pciboxSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF PciboxSlot ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with PCI-Box slots information." ::= { otherBoardInfo 2 } pciboxSlotEntry OBJECT-TYPE SYNTAX PciboxSlot ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { pbSlotPciboxNumber, pbSlotSlotNumber } ::= { pciboxSlotTable 1 } PciboxSlot ::= SEQUENCE { pbSlotPciboxNumber INTEGER, pbSlotSlotNumber INTEGER, pbSlotPresentStatus INTEGER, pbSlotPowerStatus INTEGER } pbSlotPciboxNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PCI-Box identification number.(index:0 based)" ::= { pciboxSlotEntry 1 } pbSlotSlotNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PCI-Box slot identification number.(index:0 based)" ::= { pciboxSlotEntry 2 } pbSlotPresentStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PCI-Box slot present status.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 unknown 0x00010000" ::= { pciboxSlotEntry 3 } pbSlotPowerStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PCI-Box slot power status. Status Value power-on 0 power-off 1" ::= { pciboxSlotEntry 4 } -- ---------------------------------------------------------------------------- -- TABLE: gspbTable -- -- gspbTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.9.3 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- gspbTable OBJECT-TYPE SYNTAX SEQUENCE OF Gspb ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with GSPB information." ::= { otherBoardInfo 3 } gspbEntry OBJECT-TYPE SYNTAX Gspb ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { gspbNumber } ::= { gspbTable 1 } Gspb ::= SEQUENCE { gspbNumber INTEGER, gspbPhysicalID DisplayString, gspbModelNo DisplayString, gspbSerialNo DisplayString } gspbNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "GSPB identification number.(index:0 based)" ::= { gspbEntry 1 } gspbPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "GSPB identification name." ::= { gspbEntry 2 } gspbModelNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "GSPB model name." ::= { gspbEntry 3 } gspbSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "GSPB serial number." ::= { gspbEntry 4 } -- ---------------------------------------------------------------------------- -- TABLE: sasuTable -- -- sasuTable : .1.3.6.1.4.1.211.1.31.1.2.100.1.9.4 -- --Implementation of this table is mandatory -- ---------------------------------------------------------------------------- sasuTable OBJECT-TYPE SYNTAX SEQUENCE OF Sasu ACCESS not-accessible STATUS mandatory DESCRIPTION "Table with SAS-Unit information." ::= { otherBoardInfo 4 } sasuEntry OBJECT-TYPE SYNTAX Sasu ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { sasuNumber } ::= { sasuTable 1 } Sasu ::= SEQUENCE { sasuNumber INTEGER, sasuPhysicalID DisplayString, sasuModelNo DisplayString, sasuSerialNo DisplayString } sasuNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SAS-Unit identification number.(index:0 based)" ::= { sasuEntry 1 } sasuPhysicalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SAS-Unit identification name." ::= { sasuEntry 2 } sasuModelNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SAS-Unit model name." ::= { sasuEntry 3 } sasuSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SAS-Unit serial number." ::= { sasuEntry 4 } --logicalComponentForLinux-MIB groups --logicalComponentForWindows-MIB groups --monitoringFunction-MIB groups --thresholdFunction-MIB groups thresholdActionInfo OBJECT IDENTIFIER ::={ thresholdFunction 1 } -- **************************************************************************** -- -- GROUP: thresholdActionInfo -- -- thresholdActionInfo : .1.3.6.1.4.1.211.1.31.1.2.100.5.1 -- --Implementation of this group is mandatory -- -- **************************************************************************** thrActionPolicySetting OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Threshold exceeded action. (bit field) Action Bit LOG 0x00000001 TRAP 0x0000000c MAIL 0x00000010 EXPORT 0x00000040" ::= { thresholdActionInfo 1 } --statusFunction-MIB groups physCompStatus OBJECT IDENTIFIER ::={ statusFunction 1 } -- **************************************************************************** -- -- GROUP: physCompStatus -- -- physCompStatus : .1.3.6.1.4.1.211.1.31.1.2.100.6.1 -- --Implementation of this group is mandatory -- -- **************************************************************************** cpuParTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { physCompStatus 1 } memoryParTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory module total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { physCompStatus 2 } pciFuncParTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Pci device total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { physCompStatus 3 } systemBoardParTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "System board total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { physCompStatus 4 } ioBoardParTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "I/O board total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000 deprecated: PSA-2.0.0 or later does not support this objest." ::= { physCompStatus 5 } scsiDevParTotalStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scsi device total status in Partition.(Bit field) Status Bit ok 0x00000000 not-present 0x10000000 error 0x01000000 warning 0x00100000 degraded 0x00040000 unknown 0x00010000" ::= { physCompStatus 6 } --otherFunction-MIB groups securityInfo OBJECT IDENTIFIER ::={ otherFunction 1 } agentInfo OBJECT IDENTIFIER ::={ otherFunction 2 } diskSmartInfo OBJECT IDENTIFIER ::={ otherFunction 3 } watchdogInfo OBJECT IDENTIFIER ::={ otherFunction 4 } partitionManagementInfo OBJECT IDENTIFIER ::={ otherFunction 5 } -- **************************************************************************** -- -- GROUP: securityInfo -- -- securityInfo : .1.3.6.1.4.1.211.1.31.1.2.100.7.1 -- --Implementation of this group is mandatory -- -- **************************************************************************** -- **************************************************************************** -- -- GROUP: agentInfo -- -- agentInfo : .1.3.6.1.4.1.211.1.31.1.2.100.7.2 -- --Implementation of this group is mandatory -- -- **************************************************************************** agentVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PrimeQuest Server Agent's(PSA) version string." ::= { agentInfo 1 } psaFilterVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "PSA eventlog filter version string. (e.g. VERSION=1; LEVEL=1; PTF-NO=1 --> 01010001)" ::= { agentInfo 2 } -- **************************************************************************** -- -- GROUP: diskSmartInfo -- -- diskSmartInfo : .1.3.6.1.4.1.211.1.31.1.2.100.7.3 -- --Implementation of this group is mandatory -- -- **************************************************************************** diskSMARTMonitoring OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Disk SMART monitoring switch. Refer to the following definitions; value contens 0 enable 1 diabable 2 not-available" ::= { diskSmartInfo 1 } -- **************************************************************************** -- -- GROUP: watchdogInfo -- -- watchdogInfo : .1.3.6.1.4.1.211.1.31.1.2.100.7.4 -- --Implementation of this group is mandatory -- -- **************************************************************************** osWatchdogEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "OS watchdog monitoring switch. It is necessary to set the 'osWatchdogTimeout' object before setting this object. Refer to the following definitions; value contens 0 off 1 on" ::= { watchdogInfo 1 } osWatchdogTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set the OS watchdog timeout period (unit:sec)" ::= { watchdogInfo 2 } osWatchdogReaction OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "OS watchdog timeout action. Refer to the following definitions; value contens 0 none-action 1 hardware-reset 2 power-down 3 power-cycle 4 init" ::= { watchdogInfo 3 } bootWatchdogEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Boot watchdog monitoring switch. It is necessary to set the 'bootWatchdogTimeout' object before setting this object. Refer to the following definitions; value contens 0 off 1 on" ::= { watchdogInfo 4 } bootWwatchdogTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set the boot watchdog timeout period (unit:sec)" ::= { watchdogInfo 5 } -- **************************************************************************** -- -- GROUP: partitionManagementInfo -- -- partitionManagementInfo : .1.3.6.1.4.1.211.1.31.1.2.100.7.5 -- --Implementation of this group is mandatory -- -- **************************************************************************** usingOperatingSystem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Operating system used with this partition. Refer to the following definitioins; value contens 0 linux 1 windows" ::= { partitionManagementInfo 1 } partitionName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Partition name." ::= { partitionManagementInfo 2 } hostName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Host name of the server. This value is written to the network configuration file." ::= { partitionManagementInfo 3 } fujitsuChassisSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Chassis identification number." ::= { partitionManagementInfo 4 } modelNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Model number." ::= { partitionManagementInfo 5 } partitionID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Partition Identification number." ::= { partitionManagementInfo 6 } partitionManagementAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "SNMP manager can access to the Partition directly with this IP address." ::= { partitionManagementInfo 7 } fscChassisSerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "FSCs identification number." ::= { partitionManagementInfo 8 } mmbManagementAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "SNMP manager can access to the Management board with this IP address." ::= { partitionManagementInfo 9 } partitionManagementAddress2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SNMP manager can access to the Partition directly with this IP address. Please use this object instead of 'partitionManagementAddress'." ::= { partitionManagementInfo 10 } mmbManagementAddress2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SNMP manager can access to the Management board with this IP address. Please use this object instead of 'mmbManagementAddress'." ::= { partitionManagementInfo 11 } modelName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Chasis model name.(ex: PRIMEQUEST 580)" ::= { partitionManagementInfo 12 } --pxFunction-MIB groups managementInfo OBJECT IDENTIFIER ::={ pxFunction 1 } -- **************************************************************************** -- -- GROUP: managementInfo -- -- managementInfo : .1.3.6.1.4.1.211.1.31.1.2.100.8.1 -- --Implementation of this group is mandatory -- -- **************************************************************************** pxInstallationStatus OBJECT-TYPE SYNTAX INTEGER{ installed(1), not-installed(2) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { managementInfo 1 } END