PRVT-JDSU-MIB

All MIBs › PRVT-JDSU-MIB

Organization: BATM Advanced Communication

Last Updated: 2011-03-15

Category: Physical Layer and Interfaces

Description: Supports BATM Advanced Communication integration with JDSU optical test and measurement equipment for diagnosing fiber issues.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRVT-JDSU-MIB?

PRVT-JDSU-MIB is a BATM Advanced Communication proprietary MIB controlling and monitoring JDSU-related loopback functionality (likely integrated JDSU test-head/SFP diagnostics) on BATM switches. Its loopback table, keyed by index, records admin status, remote MAC address, remote inner/outer VLAN, operational status, and row status, alongside admin/oper-state-change notifications. As a configuration/status MIB it lets an administrator remotely enable a JDSU loopback test and confirm whether it is operationally active for a given remote MAC/VLAN combination. It is deployed on BATM Advanced Communication switches with integrated JDSU test functionality. Engineers can download the PRVT-JDSU-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRVT-JDSU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BATM Advanced Communication switches (integrated JDSU test)

Monitoring Examples

An administrator sets prvtJdsuLoopbackAdminStatus to remotely trigger a loopback test toward a specific remote MAC/VLAN and confirms prvtJdsuLoopbackOperationalStatus reflects an active loop on a BATM switch.

What Can Be Monitored

JDSU loopback admin/operational status

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From PRVT-SWITCH-MIB

switch

OBJECT-IDENTITY

From Q-BRIDGE-MIB

VlanId

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
prvtJdsuMib	1.3.6.1.4.1.738.1.5.137			This MIB provide control and analisys for JDSU functionality.
prvtJdsuNotifications	1.3.6.1.4.1.738.1.5.137.0
NTF prvtJdsuAdminStateChange	1.3.6.1.4.1.738.1.5.137.0.1			This trap should be sent whenever a JDSU admins state is changed for a specific interface.
NTF prvtJdsuOperStateChange	1.3.6.1.4.1.738.1.5.137.0.2			This trap should be sent whenever a JDSU state is changed on a specific interface.
prvtJdsuObjects	1.3.6.1.4.1.738.1.5.137.1
prvtJdsuLoopback	1.3.6.1.4.1.738.1.5.137.1.1
prvtJdsuLoopbackTable	1.3.6.1.4.1.738.1.5.137.1.1.1		not-accessible	This table holds the configuration for JDSU loopback
prvtJdsuLoopbackEntry	1.3.6.1.4.1.738.1.5.137.1.1.1.1		not-accessible	NONE
INT prvtJdsuLoopbackAdminStatus	1.3.6.1.4.1.738.1.5.137.1.1.1.1.1	INTEGER	read-create	JDSU remote loopback admin status. This can be used to either enable or disable JDSU loopback on a certain interface. Forced parameter is used for manually set loopback. Remote parameter is used for JDSU remote operation.
MAC prvtJdsuLoopbackRemoteMac	1.3.6.1.4.1.738.1.5.137.1.1.1.1.2	MacAddress	read-write	Remote MAC address of the device for JDSU loopback testing.
VLA prvtJdsuLoopbackRemoteInnerVlan	1.3.6.1.4.1.738.1.5.137.1.1.1.1.3	VlanId	read-write	This is used as the VLAN tag in case of single encapsulated packets or as the inner VLAN tag in case of dual encapsulated packets.
VLA prvtJdsuLoopbackRemoteOuterVlan	1.3.6.1.4.1.738.1.5.137.1.1.1.1.4	VlanId	read-write	The outer VLAN tag in case of dual encapsulated packets.
INT prvtJdsuLoopbackOperationalStatus	1.3.6.1.4.1.738.1.5.137.1.1.1.1.5	INTEGER	read-only	JDSU remote loopback current operational status.
ROW prvtJdsuLoopbackRowStatus	1.3.6.1.4.1.738.1.5.137.1.1.1.1.6	RowStatus	read-create	The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.
prvtJdsuConformance	1.3.6.1.4.1.738.1.5.137.2
prvtJdsuCompliances	1.3.6.1.4.1.738.1.5.137.2.1
prvtJdsuCompliance	1.3.6.1.4.1.738.1.5.137.2.1.1			The compliance statement for support of the private JDSU MIB module.
prvtJdsuGroups	1.3.6.1.4.1.738.1.5.137.2.2
prvtJdsuLoopbackGroup	1.3.6.1.4.1.738.1.5.137.2.2.1			Objects for the JDSU loopback group.
prvtJdsuLoopbackNotificationsGroup	1.3.6.1.4.1.738.1.5.137.2.2.2			Objects for the Event Propagation notifications group.

RFC description

Manages BATM Advanced Communication integration with JDSU optical test and measurement equipment for fiber diagnostics.

Start monitoring BATM Advanced Communication switches with integrated JDSU test with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRVT-JDSU-MIB

What Is PRVT-JDSU-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description