All MIBs › PRVT-JDSU-MIB › prvtJdsuLoopbackAdminStatus
prvtJdsuLoopbackAdminStatus
Module: PRVT-JDSU-MIB
OID (symbolic): PRVT-JDSU-MIB::prvtJdsuLoopbackAdminStatus
OID (numeric): 1.3.6.1.4.1.738.1.5.137.1.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: JDSU remote loopback admin status. This can be used to either enable or disable JDSU loopback on a certain interface. Forced parameter is used for manually set loopback. Remote parameter is used for JDSU remote operation.
What is prvtJdsuLoopbackAdminStatus?
This enumerated value (disable, forced, or remote) sets the administrative status of a JDSU-style remote loopback on an interface: forced is used for a manually configured loopback, and remote is used for JDSU remote-triggered operation. An admin uses it to enable diagnostic loopback testing on a link, either manually or in response to a remote test request. For example, setting this to forced(2) would put the interface into loopback mode for manual link testing regardless of any remote signaling.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5 | switch | PRVT-SWITCH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.5.137 | prvtJdsuMib | PRVT-JDSU-MIB |
| 1.3.6.1.4.1.738.1.5.137.1 | prvtJdsuObjects | PRVT-JDSU-MIB |
| 1.3.6.1.4.1.738.1.5.137.1.1 | prvtJdsuLoopback | PRVT-JDSU-MIB |
| 1.3.6.1.4.1.738.1.5.137.1.1.1 | prvtJdsuLoopbackTable | PRVT-JDSU-MIB |
| 1.3.6.1.4.1.738.1.5.137.1.1.1.1 | prvtJdsuLoopbackEntry | PRVT-JDSU-MIB |
| 1.3.6.1.4.1.738.1.5.137.1.1.1.1.1 | prvtJdsuLoopbackAdminStatus | PRVT-JDSU-MIB |