PG-BRIDGE-MIB

All MIBs › PG-BRIDGE-MIB

Organization: Pairgain Technology

Last Updated: 1998-12-17

Category: DSL and Broadband

Description: Manages PairGain xDSL bridge function, including MAC forwarding, port state, and VLAN parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PG-BRIDGE-MIB?

This is a proprietary PairGain MIB for xDSL access device bridge functionality, managing MAC-layer forwarding, per-session bridge port state, and VLAN parameters tied to ATM VPI/VCI sessions. It exposes a session-port table mapping ATM VPI/VCI/slot/port identifiers to bridge-port and router-group-interface associations, plus VLAN identifiers, alongside references to the standard dot1d bridge base objects. It is largely a configuration/topology MIB useful for monitoring the software-level mapping between DSL ATM sessions and Ethernet bridge ports, confirming a subscriber's session is correctly bridged and VLAN-tagged, which reveals provisioning or connectivity faults when that mapping is missing or wrong. It explicitly builds on the standard BRIDGE-MIB (RFC 1493/4188) dot1dBase objects for the underlying bridge model. It is typically deployed on PairGain xDSL access multiplexers/bridges used by telcos for residential/business broadband access. Engineers can download the PG-BRIDGE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PG-BRIDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

PairGain xDSL access multiplexer/bridge

Monitoring Examples

Querying pgSessionPortTable using pgSessionPortVpi and pgSessionPortVci to locate a subscriber's ATM session, then checking pgSessionPortBridgePort and pgSessionPortVlanIdentifier confirms that session is bound to the correct bridge port and VLAN. If pgSessionPortIfIndex or pgSessionPortRouterGroupInterface does not resolve to the expected interface, that indicates a misconfigured or failed DSL bridging session for that subscriber.

What Can Be Monitored

ATM VPI/VCI to bridge port mapping
session VLAN identifier
bridge port association per session
router group interface binding

Imported Objects

From PAIRGAIN-COMMON-HD-MIB

pgainDSLAM

OBJECT-IDENTITY

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks

From RFC1213-MIB

ifIndex
mib-2

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
pgBridgePortToSlotPortMap	1.3.6.1.4.1.927.1.9.8.10
pgBridgePortToSlotPortMapEntry	1.3.6.1.4.1.927.1.9.8.10.1.1		not-accessible	A table that contains mapping between a BridgePort and the remote solt, port, internal VPI, internal VCI, external VPI, and external VCI values of the remote side.
INT pgBridgePortToSlotPortMapExtVci	1.3.6.1.4.1.927.1.9.8.10.1.1.6	INTEGER	read-only	The external VCI number of the remote device of the PVC between the device and the AMC.
INT pgBridgePortToSlotPortMapExtVpi	1.3.6.1.4.1.927.1.9.8.10.1.1.5	INTEGER	read-only	The external VPI number of the remote device of the PVC between the device and the AMC.
INT pgBridgePortToSlotPortMapIntVci	1.3.6.1.4.1.927.1.9.8.10.1.1.4	INTEGER	read-only	The internal VCI number of the AMC.
INT pgBridgePortToSlotPortMapIntVpi	1.3.6.1.4.1.927.1.9.8.10.1.1.3	INTEGER	read-only	The internal VPI number of the AMC.
INT pgBridgePortToSlotPortMapPort	1.3.6.1.4.1.927.1.9.8.10.1.1.2	INTEGER	read-only	The port number of the remote device of the PVC between the device and the AMC.
INT pgBridgePortToSlotPortMapSlot	1.3.6.1.4.1.927.1.9.8.10.1.1.1	INTEGER	read-only	The slot number of the remote device of the PVC between the device and the AMC.
pgBridgePortToSlotPortMapTable	1.3.6.1.4.1.927.1.9.8.10.1		not-accessible	A table that contains mapping between a BridgePort and the remote solt, port, VPI, and VCI.
INT pgBrVlanGroupIdentifier	1.3.6.1.4.1.927.1.9.8.7.1.1.1	INTEGER	read-only	The value that defines the VLAN group indentifier. The system will always have a VLAN group entry defined with the group identifier value of 1.
INT pgBrVlanGroupMode	1.3.6.1.4.1.927.1.9.8.7.1.1.4	INTEGER	read-write	Determines whether data with a unicast MAC address can be forwarded between configured Vlans.
OCT pgBrVlanGroupName	1.3.6.1.4.1.927.1.9.8.7.1.1.3	OCTET STRING	read-write	String identifier to the VLAN group. Used only for display.
ROW pgBrVlanGroupRowStatus	1.3.6.1.4.1.927.1.9.8.7.1.1.21	RowStatus	read-write	This object allows table entries to be created and deleted. The RowStatus should be out of the ACTIVE state for other columns to be modified.
TIM pgBrVlanGroupStpBridgeForwardDelay	1.3.6.1.4.1.927.1.9.8.7.1.1.20	Timeout	read-write	The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
TIM pgBrVlanGroupStpBridgeHelloTime	1.3.6.1.4.1.927.1.9.8.7.1.1.19	Timeout	read-write	The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
TIM pgBrVlanGroupStpBridgeMaxAge	1.3.6.1.4.1.927.1.9.8.7.1.1.18	Timeout	read-write	The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of pgBrVlanGroupStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
BRI pgBrVlanGroupStpDesignatedRoot	1.3.6.1.4.1.927.1.9.8.7.1.1.11	BridgeId	read-only	The bridge identifier of the spanning tree root as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
INT pgBrVlanGroupStpEnable	1.3.6.1.4.1.927.1.9.8.7.1.1.6	INTEGER	read-write	STP status of the VLAN group. This object is not used until VLAN implementation is complete.
TIM pgBrVlanGroupStpForwardDelay	1.3.6.1.4.1.927.1.9.8.7.1.1.17	Timeout	read-only	This time value, in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. (Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.)
TIM pgBrVlanGroupStpHelloTime	1.3.6.1.4.1.927.1.9.8.7.1.1.15	Timeout	read-only	The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
INT pgBrVlanGroupStpHoldTime	1.3.6.1.4.1.927.1.9.8.7.1.1.16	INTEGER	read-only	This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
TIM pgBrVlanGroupStpMaxAge	1.3.6.1.4.1.927.1.9.8.7.1.1.14	Timeout	read-only	The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
INT pgBrVlanGroupStpPriority	1.3.6.1.4.1.927.1.9.8.7.1.1.8	INTEGER	read-write	The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are defined by the value of dot1dBaseBridgeAddress.
INT pgBrVlanGroupStpProtocolSpecification	1.3.6.1.4.1.927.1.9.8.7.1.1.7	INTEGER	read-only	An indication of which Spanning Tree Protocol version is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version, a new value will be defined.
INT pgBrVlanGroupStpRootCost	1.3.6.1.4.1.927.1.9.8.7.1.1.12	INTEGER	read-only	The cost of the path to the root as seen from this bridge.
INT pgBrVlanGroupStpRootPort	1.3.6.1.4.1.927.1.9.8.7.1.1.13	INTEGER	read-only	The port number of the port that offers the lowest cost path from this bridge to the root bridge.
TIK pgBrVlanGroupStpTimeSinceTopologyChange	1.3.6.1.4.1.927.1.9.8.7.1.1.9	TimeTicks	read-only	The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
CTR pgBrVlanGroupStpTopChanges	1.3.6.1.4.1.927.1.9.8.7.1.1.10	Counter	read-only	The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
INT pgBrVlanGroupTag	1.3.6.1.4.1.927.1.9.8.7.1.1.5	INTEGER	read-write	802.1Q enable/disable.
INT pgBrVlanGroupWanBcEnable	1.3.6.1.4.1.927.1.9.8.7.1.1.2	INTEGER	read-write	Flag that defines whether broadcast messages are allowed. When disabled, a packet with an unknown destination MAC address may not be flooded into the WAN ports.
pgDot1dBase	1.3.6.1.4.1.927.1.9.8.2
INT pgDot1dBaseBrEnable	1.3.6.1.4.1.927.1.9.8.2.1.1.1	INTEGER	read-write	Status of the Bridge. The Bridge code can be enabled or disabled based on this flag. This MIB is implementation dependent.
MAC pgDot1dBaseBridgeAddress	1.3.6.1.4.1.927.1.9.8.2.1.1.3	MacAddress	read-only	The MAC address used to create a unique identifier for the bridge. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required that this address be unique. When concatenated with dot1dStpPriority, a unique BridgeIdentifier is formed, for use by the Spanning Tree Protocol.
INT pgDot1dBaseBrStpEnable	1.3.6.1.4.1.927.1.9.8.2.1.1.2	INTEGER	read-write	The admin status of Spanning Tree Protocol. This object enables the user to run Spanning Tree.
pgDot1dBaseEntry	1.3.6.1.4.1.927.1.9.8.2.1.1		not-accessible	Table entries that contain global database information for the Bridge Engine.
INT pgDot1dBaseNumPorts	1.3.6.1.4.1.927.1.9.8.2.1.1.4	INTEGER	read-only	The number of ports controlled by this bridging entity.
INT pgDot1dBasePort	1.3.6.1.4.1.927.1.9.8.3.1.1.1	INTEGER	read-only	The logical port number of the port for which this entry contains bridge management information.
OID pgdot1dBasePortCircuit	1.3.6.1.4.1.927.1.9.8.3.1.1.3	OBJECT IDENTIFIER	read-only	For a port which (potentially) has the same dot1dBasePortIfIndex value as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one- to-one with multiple X.25 virtual circuits, this value might identify an object instance, such as the first instance, associated with the X.25 virtual circuit that corresponds to this port. For a port that has a unique dot1dBasePortIfIndex value , this object can have the value { 0 0 }.
CTR pgdot1dBasePortDelayExceededDiscards	1.3.6.1.4.1.927.1.9.8.3.1.1.4	Counter	read-only	The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
pgdot1dBasePortEntry	1.3.6.1.4.1.927.1.9.8.3.1.1		not-accessible	A list of information for each port that is associated with the bridge.
INT pgdot1dBasePortIfIndex	1.3.6.1.4.1.927.1.9.8.3.1.1.2	INTEGER	read-only	The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.
CTR pgdot1dBasePortMtuExceededDiscards	1.3.6.1.4.1.927.1.9.8.3.1.1.5	Counter	read-only	The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
pgdot1dBasePortTable	1.3.6.1.4.1.927.1.9.8.3.1		not-accessible	A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
pgDot1dBaseTable	1.3.6.1.4.1.927.1.9.8.2.1		not-accessible	A table that contains global database information for the Bridge Engine.
INT pgDot1dBaseType	1.3.6.1.4.1.927.1.9.8.2.1.1.5	INTEGER	read-only	The type of bridging this bridge can perform. The type of bridging performed by a bridge is indicated by entries in the port table for the given type.
pgDot1dStatic	1.3.6.1.4.1.927.1.9.8.6
MAC pgDot1dStaticAddress	1.3.6.1.4.1.927.1.9.8.6.1.1.1	MacAddress	read-write	The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.
OCT pgDot1dStaticAllowedToGoTo	1.3.6.1.4.1.927.1.9.8.6.1.1.3	OCTET STRING	read-write	The set of ports to which frames received from a specific port, and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
pgDot1dStaticEntry	1.3.6.1.4.1.927.1.9.8.6.1.1		not-accessible	Filtering information configured into the bridge by (local or network) management, specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.
INT pgDot1dStaticReceivePort	1.3.6.1.4.1.927.1.9.8.6.1.1.2	INTEGER	read-write	Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies to all ports of the bridge for which there is no other applicable entry.
INT pgDot1dStaticStatus	1.3.6.1.4.1.927.1.9.8.6.1.1.4	INTEGER	read-write	This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.
pgDot1dStaticTable	1.3.6.1.4.1.927.1.9.8.6.1		not-accessible	A table containing filtering information configured into the bridge by (local or network) management, specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.
INT pgDot1dStpPort	1.3.6.1.4.1.927.1.9.8.4.1.1.1	INTEGER	read-only	The logical number of the port for which this entry contains Spanning Tree Protocol management information.
BRI pgdot1dStpPortDesignatedBridge	1.3.6.1.4.1.927.1.9.8.4.1.1.8	BridgeId	read-only	The Bridge Identifier of the port's Designated Bridge for this port's segment.
INT pgdot1dStpPortDesignatedCost	1.3.6.1.4.1.927.1.9.8.4.1.1.7	INTEGER	read-only	The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
OCT pgdot1dStpPortDesignatedPort	1.3.6.1.4.1.927.1.9.8.4.1.1.9	OCTET STRING	read-only	The Port Identifier of the port on the Designated Bridge for this port's segment.
BRI pgdot1dStpPortDesignatedRoot	1.3.6.1.4.1.927.1.9.8.4.1.1.6	BridgeId	read-only	The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
INT pgdot1dStpPortEnable	1.3.6.1.4.1.927.1.9.8.4.1.1.4	INTEGER	read-write	The enabled/disabled status of the port.
pgdot1dStpPortEntry	1.3.6.1.4.1.927.1.9.8.4.1.1		not-accessible	A list of information maintained by every port about the Spanning Tree Protocol state for that port.
CTR pgdot1dStpPortForwardTransitions	1.3.6.1.4.1.927.1.9.8.4.1.1.10	Counter	read-only	The number of times this port has transitioned from the Learning state to the Forwarding state.
INT pgdot1dStpPortPathCost	1.3.6.1.4.1.927.1.9.8.4.1.1.5	INTEGER	read-write	The path cost of this port. This cost is used to calculate the cost of paths that include this port that are directed toward the spanning tree root. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
INT pgdot1dStpPortPriority	1.3.6.1.4.1.927.1.9.8.4.1.1.2	INTEGER	read-write	The value of the priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
ROW pgdot1dStpPortRowStatus	1.3.6.1.4.1.927.1.9.8.4.1.1.11	RowStatus	read-write	This object allows table entries to be created and deleted. The RowStatus should be out of the ACTIVE state for other columns to be modified.
INT pgdot1dStpPortState	1.3.6.1.4.1.927.1.9.8.4.1.1.3	INTEGER	read-only	The port's current state as defined by the Spanning Tree Protocol application. This state controls what action a port takes when it receives a frame. If the bridge detects a port that is malfunctioning it places that port into the broken (6) state. Disabled ports (see dot1dStpPortEnable) have a value of disabled (1).
pgdot1dStpPortTable	1.3.6.1.4.1.927.1.9.8.4.1		not-accessible	A table that contains port-specific information for the Spanning Tree Protocol.
pgDot1dTp	1.3.6.1.4.1.927.1.9.8.5
INT pgDot1dTpAgingTime	1.3.6.1.4.1.927.1.9.8.2.1.1.7	INTEGER	read-write	The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
MAC pgDot1dTpFdbAddress	1.3.6.1.4.1.927.1.9.8.5.1.1.1	MacAddress	read-only	A unicast MAC address for which the bridge has forwarding and/or filtering information.
pgDot1dTpFdbEntry	1.3.6.1.4.1.927.1.9.8.5.1.1		not-accessible	Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
INT pgDot1dTpFdbPort	1.3.6.1.4.1.927.1.9.8.5.1.1.2	INTEGER	read-only	Either the value '0' or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of pgDot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the pgDot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of pgDot1dTpFdbStatus is not learned(3).
INT pgDot1dTpFdbStatus	1.3.6.1.4.1.927.1.9.8.5.1.1.3	INTEGER	read-only	The status of this entry. The meanings of the values are: other(1) : none of the following. This includes the case in which some other MIB object (not the corresponding instance of pgDot1dTpFdbPort, nor an entry in the pgDot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of pgDot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of pgDot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of pgDot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of pgDot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of pgDot1dTpFdbAddress is also the value of an existing instance of pgDot1dStaticAddress.
pgDot1dTpFdbTable	1.3.6.1.4.1.927.1.9.8.5.1		not-accessible	A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
CTR pgDot1dTpLearnedEntryDiscards	1.3.6.1.4.1.927.1.9.8.2.1.1.6	Counter	read-only	The total number of Forwarding Database entries that have been or would have been learned, but have been discarded due to a lack of space in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full, reducing subnetwork performance. If this counter has a significant value but is not presently increasing, it indicates that the problem has occurred but is not persistent.
INT pgDot1dTpPort	1.3.6.1.4.1.927.1.9.8.5.2.1.1	INTEGER	read-only	The port number of the port for which this entry contains Transparent bridging management information.
pgDot1dTpPortEntry	1.3.6.1.4.1.927.1.9.8.5.2.1		not-accessible	A list of information for each port of a transparent bridge.
CTR pgDot1dTpPortInDiscards	1.3.6.1.4.1.927.1.9.8.5.2.1.5	Counter	read-only	Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
CTR pgDot1dTpPortInFrames	1.3.6.1.4.1.927.1.9.8.5.2.1.3	Counter	read-only	The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
INT pgDot1dTpPortMaxInfo	1.3.6.1.4.1.927.1.9.8.5.2.1.2	INTEGER	read-only	The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
CTR pgDot1dTpPortOutFrames	1.3.6.1.4.1.927.1.9.8.5.2.1.4	Counter	read-only	The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
pgDot1dTpPortTable	1.3.6.1.4.1.927.1.9.8.5.2		not-accessible	A table that contains information about every port that is associated with this transparent bridge.
pgIfindexToSlotPortMap	1.3.6.1.4.1.927.1.9.8.9
pgIfindexToSlotPortMapEntry	1.3.6.1.4.1.927.1.9.8.9.1.1		not-accessible	A table that contains mapping between the ifIndex and solt, port, internal VPI, internal VCI, external VPI, and external VCI values of the remote side.
INT pgIfindexToSlotPortMapExtVci	1.3.6.1.4.1.927.1.9.8.9.1.1.6	INTEGER	read-only	The external VCI number of the remote device of the PVC between the device and the AMC.
INT pgIfindexToSlotPortMapExtVpi	1.3.6.1.4.1.927.1.9.8.9.1.1.5	INTEGER	read-only	The external VPI number of the remote device of the PVC between the device and the AMC.
INT pgIfindexToSlotPortMapIntVci	1.3.6.1.4.1.927.1.9.8.9.1.1.4	INTEGER	read-only	The internal VCI number of the AMC.
INT pgIfindexToSlotPortMapIntVpi	1.3.6.1.4.1.927.1.9.8.9.1.1.3	INTEGER	read-only	The internal VPI number of the AMC.
INT pgIfindexToSlotPortMapPort	1.3.6.1.4.1.927.1.9.8.9.1.1.2	INTEGER	read-only	The port number of the remote device of the PVC between the device and the AMC.
INT pgIfindexToSlotPortMapSlot	1.3.6.1.4.1.927.1.9.8.9.1.1.1	INTEGER	read-only	The slot number of the remote device of the PVC between the device and the AMC.
pgIfindexToSlotPortMapTable	1.3.6.1.4.1.927.1.9.8.9.1		not-accessible	A table that contains mapping between the ifIndex and solt, port, VPI, and VCI values of the remote side.
IP pgSessionGroupIpAddress	1.3.6.1.4.1.927.1.9.8.8.1.1.1	IpAddress	read-write	IP address of this interface
ROW pgSessionGroupRowStatus	1.3.6.1.4.1.927.1.9.8.8.1.1.3	RowStatus	read-write	This object allows table entries to be created and deleted. The RowStatus should be out of the ACTIVE state for other columns to be modified.
IP pgSessionGroupSubnetMask	1.3.6.1.4.1.927.1.9.8.8.1.1.2	IpAddress	read-write	Subnet mask of the LAN into which this interface belongs.
INT pgSessionInstance	1.3.6.1.4.1.927.1.9.8.1.1.1.1	INTEGER	read-only	The following three Indexes refer to a Session Logical Port. pgSessionInstance The Bridge Instance Identifier. Multiple bridge instances may be running on the Avidia Chassis. This Object identifies which bridge instance the user wishes to address. pgSessionPortVpi On an AMC Card, this value is always 0. On an OC3 Card, this is the external VPI number. On Cell or Frame based Channel cards, this value is the internal VPI number of the PVC terminating into the Bridge slot. pgSessionPortVci On an AMC Card, this value is always between 1024 and (MAX_BRT_PVCIF -1) for WAN or the VLAN Identifier in which this ethernet port belongs. On an OC3 Card, this is the external VCI number. On Cell or Frame based Channel cards, this value is the internal VCI number of the PVC terminating into the Bridge slot.
pgsessionMIB	1.3.6.1.4.1.927.1.9.8			The module defines MIB for Bridge configuration and stats
pgSessionPort	1.3.6.1.4.1.927.1.9.8.1
INT pgSessionPortBridgePort	1.3.6.1.4.1.927.1.9.8.1.1.1.7	INTEGER	read-only	This is the bridge port number returned when a port is configured using the indexes for this row. This port is referenced by the Bridge code and other bridge-related configuration.
pgSessionPortEntry	1.3.6.1.4.1.927.1.9.8.1.1.1		not-accessible	Entries in a table that contains port database information for the Bridge/Router Engine. This table primarily applies to the logical port of ATM PVC in Avidia chassis
INT pgSessionPortIfIndex	1.3.6.1.4.1.927.1.9.8.1.1.1.6	INTEGER	read-only	This is the Interface Index returned by the Logical Layer Manager that is used to retrieve statistics (ifEntery) for the port defined in this MIB. A pgSessionPortIfIndex is created for each session Port. This object does not attach to the TCP/IP stack.
INT pgSessionPortNum	1.3.6.1.4.1.927.1.9.8.1.1.1.5	INTEGER	read-write	The Physical Port number of the card, for which this logical port number is addressed. On an AMC Card, the values are 1 or 2 for Ethernet port 1 or 2. On an OC3 Card, the values are 1 or 2 for the OC3 line number. On Cell or Frame based Channel cards, the value is the physical xDSL port number.
INT pgSessionPortRouterGroupInterface	1.3.6.1.4.1.927.1.9.8.1.1.1.8	INTEGER	read-write	This object is an index into a row in the pgSessionRouterGroupTable that is created by the Logical Layer Manager. It is used to attach this session port to the TCP/IP stack. When a session port needs an IP route entry, a row is created in the pgSessionRouterGroupTable and its index is used in this MIB to map this session base port to the pgSessionGroupTable row.
ROW pgSessionPortRowStatus	1.3.6.1.4.1.927.1.9.8.1.1.1.12	RowStatus	read-write	This object allows table entries to be created and deleted. The RowStatus should be out of the ACTIVE state for other columns to be modified.
INT pgSessionPortServiceType	1.3.6.1.4.1.927.1.9.8.1.1.1.10	INTEGER	read-write	This field shows the type of service enabled for the port. Bit Positions: 7 6 5 4 3 2 1 0 \| \| \| \| \| ---- Bridging \| ------------ Routing -------------------- PPP The services can be enabled or disabled by a logical OR with the existing value.
INT pgSessionPortSlotNum	1.3.6.1.4.1.927.1.9.8.1.1.1.4	INTEGER	read-write	The number of the remote (external) Card slot
STR pgSessionPortSubscriberName	1.3.6.1.4.1.927.1.9.8.1.1.1.11	DisplayString	read-write	The name of the subscriber to whom this Port is assigned.
pgSessionPortTable	1.3.6.1.4.1.927.1.9.8.1.1		not-accessible	A table that contains port database information for the Bridge/Router Engine. This table primarily applies to the logical port of ATM PVC in Avidia chassis
INT pgSessionPortVci	1.3.6.1.4.1.927.1.9.8.1.1.1.3	INTEGER	read-only	The following three Indexes refer to a Session Logical Port. pgSessionInstance The Bridge Instance Identifier. Multiple bridge instances may be running on the Avidia Chassis. This Object identifies which bridge instance the user wishes to address. pgSessionPortVpi On an AMC Card, this value is always 0. On an OC3 Card, this is the external VPI number. On the Cell or Frame based Channel cards, this value is the internal VPI number of the PVC terminating into the Bridge slot. pgSessionPortVci On an AMC Card, this value is always between 1024 and (MAX_BRT_PVCIF -1) for WAN or the VLAN Identifier in which this ethernet port belongs. On an OC3 Card, this is the external VCI number. On the Cell or Frame based Channel cards, this value is the internal VCI number of the PVC terminating into the Bridge slot.
INT pgSessionPortVlanIdentifier	1.3.6.1.4.1.927.1.9.8.1.1.1.9	INTEGER	read-write	The identifier of the 802.1q VLAN group to which this port belongs. The system always has a VLAN group entry defined with the group identifier value of 1.
INT pgSessionPortVpi	1.3.6.1.4.1.927.1.9.8.1.1.1.2	INTEGER	read-only	The following three Indexes refer to a Session Logical Port. pgSessionInstance The Bridge Instance Identifier. Multiple bridge instances may be running on the Avidia Chassis. This Object identifies which bridge instance the user wishes to address. pgSessionPortVpi On an AMC Card, this value is always 0. On an OC3 Card, this is the external VPI number. On Cell or Frame based Channel cards, this value is the internal VPI number of the PVC terminating into the Bridge slot. pgSessionPortVci On an AMC Card, this value is always between 1024 and (MAX_BRT_PVCIF -1) for WAN or the VLAN Identifier in which this ethernet port belongs. On an OC3 Card, this is the external VCI number. On Cell or Frame based Channel cards, this value is the internal VCI number of the PVC terminating into the Bridge slot.
pgSessionRouterGroup	1.3.6.1.4.1.927.1.9.8.8
pgSessionRouterGroupEntry	1.3.6.1.4.1.927.1.9.8.8.1.1		not-accessible
pgSessionRouterGroupTable	1.3.6.1.4.1.927.1.9.8.8.1		not-accessible	This row is used to create an IP route for the TCP/IP stack using a Logical Layer Interface. The pgSessionGroupIfIndex is used to map a row in the pgSessionPortTable to this Group Interface. The name suggests that multiple instances of pgSessionPortEntry can be grouped into a single pgSessionRouterGroupEntry to save on IP address space.
pgVlanGroup	1.3.6.1.4.1.927.1.9.8.7
pgVlanGroupEntry	1.3.6.1.4.1.927.1.9.8.7.1.1		not-accessible
pgVlanGroupTable	1.3.6.1.4.1.927.1.9.8.7.1		not-accessible

RFC description

Vendor-private MIB for bridge and access point management.

Start monitoring PairGain xDSL access multiplexer/bridge (ATM-session-to-bridge-port mapping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PG-BRIDGE-MIB

What Is PG-BRIDGE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description