All MIBs › PG-BRIDGE-MIB › pgDot1dStaticAllowedToGoTo
pgDot1dStaticAllowedToGoTo
Module: PG-BRIDGE-MIB
OID (symbolic): PG-BRIDGE-MIB::pgDot1dStaticAllowedToGoTo
OID (numeric): 1.3.6.1.4.1.927.1.9.8.6.1.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The set of ports to which frames received from a specific port, and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
What is pgDot1dStaticAllowedToGoTo?
A bitmap (one bit per port, defaulting to all-ones) specifying which ports frames matching this entry's receive-port and destination address are allowed to be forwarded out. An admin clears specific bits here to manually restrict where traffic to a given MAC address can egress.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.927.1.9.8.6.1.1.3 snmpwalk -v2c -c public <target> PG-BRIDGE-MIB::pgDot1dStaticAllowedToGoTo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.927.1.9.8.6.1.1.3.1 snmpget -v2c -c public <target> PG-BRIDGE-MIB::pgDot1dStaticAllowedToGoTo.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.927.1.9.8.6.1.1.3.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> pgDot1dStaticAllowedToGoTo.1
Start monitoring PairGain xDSL access multiplexer/bridge (ATM-session-to-bridge-port mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PG-BRIDGE-MIB::pgDot1dStaticAllowedToGoTo OID value, configure state conditions and alerts, and monitor any PairGain xDSL access multiplexer/bridge (ATM-session-to-bridge-port mapping) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.927 | pairgain | PAIRGAIN-COMMON-HD-MIB |
| 1.3.6.1.4.1.927.1 | products | PAIRGAIN-COMMON-HD-MIB |
| 1.3.6.1.4.1.927.1.9 | pgainDSLAM | PAIRGAIN-COMMON-HD-MIB |
| 1.3.6.1.4.1.927.1.9.8 | pgsessionMIB | PAIRGAIN-COMMON-HD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.927.1.9.8.6 | pgDot1dStatic | PG-BRIDGE-MIB |
| 1.3.6.1.4.1.927.1.9.8.6.1 | pgDot1dStaticTable | PG-BRIDGE-MIB |
| 1.3.6.1.4.1.927.1.9.8.6.1.1 | pgDot1dStaticEntry | PG-BRIDGE-MIB |
| 1.3.6.1.4.1.927.1.9.8.6.1.1.3 | pgDot1dStaticAllowedToGoTo | PG-BRIDGE-MIB |