OPTIX-SONET-EQPTMGT-MIB-V2

All MIBs › OPTIX-SONET-EQPTMGT-MIB-V2

Organization: Your organization

Last Updated: 2006-05-23

Category: Optical Networking

Description: Manages equipment inventory, slot configuration, and card status on Huawei OptiX SONET optical transport platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OPTIX-SONET-EQPTMGT-MIB-V2?

This is a Huawei vendor MIB for equipment management on the OptiX SONET optical transport platform, part of Huawei's telecom-grade optical networking product line; its own module description text is a placeholder, so limited internal detail is available. Based on its short description, it exposes equipment inventory, slot configuration, and card status data for the optical transport shelf. This is directly a hardware-status MIB: tracking which cards are installed in which slots and their operational state is core physical-hardware health monitoring for an optical transport network element. It likely complements other Huawei OptiX MIBs covering performance monitoring and alarms to provide a complete optical NE management picture, though this can't be confirmed from the data given. It is deployed in carrier/telecom SONET optical transport networks built on Huawei OptiX equipment. Network engineers evaluating or troubleshooting this functionality can download the OPTIX-SONET-EQPTMGT-MIB-V2 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OPTIX-SONET-EQPTMGT-MIB-V2. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei OptiX SONET optical transport platform

Monitoring Examples

No object or table names were provided for this module. Based on its description, it would expose an equipment/slot table reporting installed card type and operational status per slot in a Huawei OptiX SONET shelf, letting an operator detect a missing, mismatched, or failed optical interface card, though specific object names could not be confirmed from the data available.

Imported Objects

From OPTIX-OID-MIB

optixProvisionSonet

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
optixsonetEqptMgt	1.3.6.1.4.1.2011.2.25.4.20.3			Enter the description for this MIB module.
optixsonetCardInfoTable	1.3.6.1.4.1.2011.2.25.4.20.3.1		not-accessible	This table describes the equipment unit management interface of Huawei SONET transmit platform
optixsonetCardInfoEntry	1.3.6.1.4.1.2011.2.25.4.20.3.1.1		not-accessible	The equipment unit management entry
G32 cardIndexSlotId	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.1	Gauge32	read-only	Slot number. This will indicate what is the slot of the object.
G32 cardIndexSfpId	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.2	Gauge32	read-only	SFP identifier. This will indicate what is the SFP Slot of the object.For the card unit, I will be zero.
OCT cardProvisionType	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.3	OCTET STRING	read-only	It means the logical unit type provisioned by user.
OCT cardPhysicalType	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.4	OCTET STRING	read-only	It means the physical unit type inserted in the slot.
NUM cardInterfaceType	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.5	IntfType	read-only	The AID unit interface type.This parameter is optional and can be used only for tributary units
I32 cardBandwidth	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.6	Integer32	read-only	The available bandwidth of the unit when it is provisioned in the slot. It is displayed when the Ethernet unit, the OC-N unit or the tributary unit is provisioned. It is the minimum value of the slot bus bandwidth and bandwidth of the unit.
OCT cardSerialNum	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.7	OCTET STRING	read-only	The serial number for the equipment. Valid value is a string and is optional.
OCT cardCLEICode	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.8	OCTET STRING	read-only	The CLEI code for the equipment. Valid value is a string and is optional.
OCT cardPartNum	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.9	OCTET STRING	read-only	Part number of the unit. Valid value is a unique 8-digit number for the unit.
OCT cardDOM	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.10	OCTET STRING	read-only	The date when the unit was manufactured and is optional.
OCT cardPCBVersion	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.11	OCTET STRING	read-only	The PCB version for the equipment. Valid value is a string and is optional.
OCT cardSWVersion	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.12	OCTET STRING	read-only	The software version for the equipment.
OCT cardFPGAVersion	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.13	OCTET STRING	read-only	The FPGA version for the equipment. Valid value is a string and is optional.
OCT cardEPLDVersion	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.14	OCTET STRING	read-only	The EPLD version for the equipment. Valid value is a string and is optional.
OCT cardBIOSVersion	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.15	OCTET STRING	read-only	The BIOS version for the equipment. Valid value for is a string and is optional.
OCT cardMAC	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.16	OCTET STRING	read-only	The MAC address of a common control unit. Valid value is a string like 00-B0-D0-E3-4C-DE and is optional.
OCT cardPSTState	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.17	OCTET STRING	read-only	means the primary state of the entity.
OCT cardSSTState	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.18	OCTET STRING	read-only	means the secondary state of the entity.
G32 cardTPSPriority	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.19	Gauge32	read-only	The priority of the AID unit if the unit is a working unit of a DSn (TPS) protection group. For any other units, this parameter is not available. This attribute will be used when multi-units fault in a DSn (TPS) protection group.Valid values are list below Value Description 1 The highest priority for the unit in a TPS protection group 2 The secondary priority for the unit in a TPS protection group 3 The third priority for the unit in a TPS protection group 4 The lowest priority for the unit in a TPS protection group
INT cardSwitchState	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.20	INTEGER	read-only	The switch state of the AID unit if the unit is a unit of a DSn (TPS) protection group. Switch state of SONET equipment protection Value Description AUTO_SW Automatic switch DNR Do not revert FRCD Forced switch IDLE Idle LOCKOUT Lock to the working unit MAN Manually switch WTR Wait to restore
OCT cardDescription	1.3.6.1.4.1.2011.2.25.4.20.3.1.1.21	OCTET STRING	read-only	Description.
optixsonetEqptMgtConformance	1.3.6.1.4.1.2011.2.25.4.20.3.2
optixsonetEqptMgtGroups	1.3.6.1.4.1.2011.2.25.4.20.3.2.1
currentObjectGroup	1.3.6.1.4.1.2011.2.25.4.20.3.2.1.1			Enter the description of the created OBJECT-GROUP.
optixsonetEqptMgtCompliances	1.3.6.1.4.1.2011.2.25.4.20.3.2.2
basicCompliance	1.3.6.1.4.1.2011.2.25.4.20.3.2.2.1			Enter the description of the created MODULE-COMPLIANCE.

RFC description

Manages equipment card information and configuration on Huawei SONET transmission platforms.

Start monitoring Huawei OptiX SONET optical transport platform (equipment/slot/card inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OPTIX-SONET-EQPTMGT-MIB-V2

What Is OPTIX-SONET-EQPTMGT-MIB-V2?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description