OPTIX-SONET-CRS-MIB-V2

All MIBs › OPTIX-SONET-CRS-MIB-V2

Organization: Your organization

Last Updated: 2006-05-23

Category: Optical Networking

Description: Manages SONET cross-connect switching configuration and status on Huawei OptiX optical transport equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OPTIX-SONET-CRS-MIB-V2?

OPTIX-SONET-CRS-MIB-V2 is a Huawei OptiX (SONET/SDH optical transport platform) proprietary MIB configuring SONET cross-connections (CRS). Its table, keyed by circuit, records a modulo-2 flag, from/to termination points, circuit and circuit-ID, preferred path, an RDLD (Route Diversity/Line Delay?) setting, active path, and row status. As a configuration MIB it lets an administrator confirm a SONET circuit's preferred vs. currently active cross-connect path on a Huawei OptiX platform. It is deployed on Huawei OptiX SONET/SDH optical transport platforms. Engineers can download the OPTIX-SONET-CRS-MIB-V2 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OPTIX-SONET-CRS-MIB-V2. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei OptiX SONET/SDH optical transport platforms

Monitoring Examples

An administrator checks optixsonetCrsActivePath against optixsonetCrsPreferredPath to confirm whether a SONET circuit is running on its preferred path on a Huawei OptiX platform.

What Can Be Monitored

SONET cross-connect preferred vs. active path

Imported Objects

From OPTIX-OID-MIB

optixProvisionSonet

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
optixsonetCRS	1.3.6.1.4.1.2011.2.25.4.20.1			Enter the description for this MIB module.
optixsonetCrsTable	1.3.6.1.4.1.2011.2.25.4.20.1.3		not-accessible	Description.
optixsonetCrsEntry	1.3.6.1.4.1.2011.2.25.4.20.1.3.1		not-accessible	Description.
INT optixsonetCrsMod2	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.1	INTEGER	read-only	The modifier that identifies the type of STS and VT path
OCT optixsonetCrsFrom	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.2	OCTET STRING	read-only	Access identifier. It can be source or destination of cross connection, or any one path of source or destination. It can be null, that means retrieve all cross connection with entered rate level. '&' is allowed.
OCT optixsonetCrsTo	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.3	OCTET STRING	read-only	Access identifier identifies the other end of the cross connection. If creating 1-to-N one-way cross-connection, multiple '&' and '&&'are allowed. Else only one '&' is allowed. cannot be null.
INT optixsonetCrsCct	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.4	INTEGER	read-only	Cross connect type.
OCT optixsonetCrsCktId	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.5	OCTET STRING	read-write	The circuit identification. It is a string of max length 32 ASCII characters. The circuit identification parameter contains the common language circuit ID or other alias of the circuit being provisioned.
OCT optixsonetCrsPreferredPath	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.6	OCTET STRING	read-write	Preferred path. It is only supplied for UPSR. Two values separated by '&' are applicable to only UPSR with 2 sources and 2 destinations.
INT optixsonetCrsRDLD	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.7	INTEGER	read-write	Redline state.Vaild values are RDLD and RDLDDEA. RDLD This value indicates that the entity is a special (red-lined) circuit. RDLDDEA Deactive RDLD state.
OCT optixsonetCrsActivePath	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.8	OCTET STRING	read-only	Active path. It is only supplied for UPSR. Two values separated by '&' are applicable to only UPSR with 2 sources and 2 destinations.
ROW optixsonetCrsRowStatus	1.3.6.1.4.1.2011.2.25.4.20.1.3.1.10	RowStatus	read-write	The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row. The status column has six defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - `notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except `notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: `notReady', `notInService' or `active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value `active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value `notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value `notReady').
optixsonetCRSConformance	1.3.6.1.4.1.2011.2.25.4.20.1.4
optixsonetCRSGroups	1.3.6.1.4.1.2011.2.25.4.20.1.4.1
currentObjectGroup	1.3.6.1.4.1.2011.2.25.4.20.1.4.1.1			Enter the description of the created OBJECT-GROUP.
optixsonetCRSCompliances	1.3.6.1.4.1.2011.2.25.4.20.1.4.2
basicCompliance	1.3.6.1.4.1.2011.2.25.4.20.1.4.2.1			Enter the description of the created MODULE-COMPLIANCE.

RFC description

Manages SONET circuit cross-connections and provisioning configuration for OPTIX optical transport equipment.

Start monitoring Huawei OptiX SONET/SDH optical transport platform (cross-connect configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OPTIX-SONET-CRS-MIB-V2

What Is OPTIX-SONET-CRS-MIB-V2?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description