-- -- OPTIX-SONET-CRS-MIB-V2.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Monday, July 17, 2006 at 13:45:26 -- OPTIX-SONET-CRS-MIB-V2 DEFINITIONS ::= BEGIN IMPORTS optixProvisionSonet FROM OPTIX-OID-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; optixsonetCRS MODULE-IDENTITY LAST-UPDATED "200605232001Z" -- May 23, 2006 at 20:01 GMT ORGANIZATION "Your organization" CONTACT-INFO "Your contact info" DESCRIPTION "Enter the description for this MIB module." ::= { optixProvisionSonet 1 } -- -- Textual conventions -- RowStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enter the description for the RowStatus TEXTUAL-CONVENTION converted from type assignment." SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } -- -- Node definitions -- -- 1.3.6.1.4.1.2011.2.25.4.20.1.3 optixsonetCrsTable OBJECT-TYPE SYNTAX SEQUENCE OF OptixsonetCrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { optixsonetCRS 3 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1 optixsonetCrsEntry OBJECT-TYPE SYNTAX OptixsonetCrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { optixsonetCrsMod2, optixsonetCrsFrom, optixsonetCrsTo, optixsonetCrsCct } ::= { optixsonetCrsTable 1 } OptixsonetCrsEntry ::= SEQUENCE { optixsonetCrsMod2 INTEGER, optixsonetCrsFrom OCTET STRING, optixsonetCrsTo OCTET STRING, optixsonetCrsCct INTEGER, optixsonetCrsCktId OCTET STRING, optixsonetCrsPreferredPath OCTET STRING, optixsonetCrsRDLD INTEGER, optixsonetCrsActivePath OCTET STRING, optixsonetCrsRowStatus RowStatus } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.1 optixsonetCrsMod2 OBJECT-TYPE SYNTAX INTEGER { crsSTS1(9), crsSTS3C(10), crsSTS6C(11), crsSTS9C(12), crsSTS12C(13), crsSTS24C(15), crsSTS48C(16), crsSTS192C(17), crsVT1(21), crsVT2(22) } MAX-ACCESS read-only STATUS current DESCRIPTION "The modifier that identifies the type of STS and VT path" ::= { optixsonetCrsEntry 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.2 optixsonetCrsFrom OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Access identifier. It can be source or destination of cross connection, or any one path of source or destination. It can be null, that means retrieve all cross connection with entered rate level. '&' is allowed. " ::= { optixsonetCrsEntry 2 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.3 optixsonetCrsTo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Access identifier identifies the other end of the cross connection. If creating 1-to-N one-way cross-connection, multiple '&' and '&&'are allowed. Else only one '&' is allowed. cannot be null." ::= { optixsonetCrsEntry 3 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.4 optixsonetCrsCct OBJECT-TYPE SYNTAX INTEGER { twoWay(1), oneWay(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Cross connect type." ::= { optixsonetCrsEntry 4 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.5 optixsonetCrsCktId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The circuit identification. It is a string of max length 32 ASCII characters. The circuit identification parameter contains the common language circuit ID or other alias of the circuit being provisioned." ::= { optixsonetCrsEntry 5 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.6 optixsonetCrsPreferredPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Preferred path. It is only supplied for UPSR. Two values separated by '&' are applicable to only UPSR with 2 sources and 2 destinations." ::= { optixsonetCrsEntry 6 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.7 optixsonetCrsRDLD OBJECT-TYPE SYNTAX INTEGER { rdld(1), rdldDEA(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redline state.Vaild values are RDLD and RDLDDEA. RDLD This value indicates that the entity is a special (red-lined) circuit. RDLDDEA Deactive RDLD state." ::= { optixsonetCrsEntry 7 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.8 optixsonetCrsActivePath OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Active path. It is only supplied for UPSR. Two values separated by '&' are applicable to only UPSR with 2 sources and 2 destinations. " ::= { optixsonetCrsEntry 8 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.3.1.10 optixsonetCrsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row. The status column has six defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - `notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except `notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: `notReady', `notInService' or `active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value `active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value `notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value `notReady')." ::= { optixsonetCrsEntry 10 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.4 optixsonetCRSConformance OBJECT IDENTIFIER ::= { optixsonetCRS 4 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.4.1 optixsonetCRSGroups OBJECT IDENTIFIER ::= { optixsonetCRSConformance 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.4.1.1 currentObjectGroup OBJECT-GROUP OBJECTS { optixsonetCrsMod2, optixsonetCrsFrom, optixsonetCrsTo, optixsonetCrsCct, optixsonetCrsCktId, optixsonetCrsPreferredPath, optixsonetCrsRDLD, optixsonetCrsActivePath, optixsonetCrsRowStatus } STATUS current DESCRIPTION "Enter the description of the created OBJECT-GROUP." ::= { optixsonetCRSGroups 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.4.2 optixsonetCRSCompliances OBJECT IDENTIFIER ::= { optixsonetCRSConformance 2 } -- 1.3.6.1.4.1.2011.2.25.4.20.1.4.2.1 basicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Enter the description of the created MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { currentObjectGroup } ::= { optixsonetCRSCompliances 1 } END -- -- OPTIX-SONET-CRS-MIB-V2.mib --