OMNI-gx2RSW200-MIB

All MIBs › OMNI-gx2RSW200-MIB

Category: Cable/DOCSIS

Description: Manages the Cisco/Scientific-Atlanta GX2 RSW200 200 MHz RF switch module in HFC optical node deployments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNI-gx2RSW200-MIB?

OMNI-gx2RSW200-MIB is a vendor MIB for the Cisco/Scientific-Atlanta GX2 RSW200, a 200 MHz RF switch module used in HFC optical node deployments, functionally the lower-bandwidth sibling of the RSW1000B switch module. It exposes configuration and status objects describing the switch module's current path state and operating condition within the GX2 chassis. Its main monitoring purpose is hardware status of the switch, so operators can confirm the module is in its expected position and free of faults, which is important for RF path redundancy or routing schemes relying on this switch. It is part of the OMNI-gx2 family of module MIBs sharing a common chassis/module management model with the laser, amplifier, and attenuator modules. It is typically deployed in HFC optical nodes needing 200 MHz-range RF switching for signal path management. Engineers can download the OMNI-gx2RSW200-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2RSW200-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General Instrument OmniStar GX2 HFC headend/optical node (GX2 RSW200 200 MHz RF switch module)

Monitoring Examples

The only sample object reference available for this module is a placeholder ("--"), so no concrete object names can be cited; in practice an operator would poll the RSW200's switch-position and status objects within the GX2 chassis management tree, similar to its RSW1000B sibling. A switch reporting an unexpected position or a fault condition would reveal a failed path switchover or hardware issue in the optical node's RF routing. It would typically be monitored alongside other OMNI-gx2 module MIBs for the same chassis.

What Can Be Monitored

switch position/state
module operational status

Imported Objects

From GX2HFC-MIB

gx2Rsw200

OBJECT-IDENTITY

From NLSBBN-TRAPS-MIB

trapChangedObjectId	OBJECT-TYPE
trapChangedValueDisplayString	OBJECT-TYPE
trapChangedValueInteger	OBJECT-TYPE
trapIdentifier	OBJECT-TYPE
trapNETrapLastTrapTimeStamp	OBJECT-TYPE
trapNetworkElemAdminState	OBJECT-TYPE
trapNetworkElemAlarmStatus	OBJECT-TYPE
trapNetworkElemAvailStatus	OBJECT-TYPE
trapNetworkElemModelNumber	OBJECT-TYPE
trapNetworkElemOperState	OBJECT-TYPE
trapNetworkElemSerialNum	OBJECT-TYPE
trapPerceivedSeverity	OBJECT-TYPE
trapText	OBJECT-TYPE

From RFC1155-SMI

Counter

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF trapRSW200ConfigChangeInteger	1.3.6.1.4.1.1166.6.1.2.8.0.1			This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapRSW200ConfigChangeDisplayString	1.3.6.1.4.1.1166.6.1.2.8.0.2			This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapRSW200RFInputAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.3			This trap is issued when the Switch Control signals go out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapRSW200FanCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.4			This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapRSW200ModuleTempAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.5			This trap is issued when the Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapRSW200FlashAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.6			This trap is issued when the detects an error during Flash memory operations.
NTF trapRSW200BankBootAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.7			This trap is issued when the detects an error while booting from bank 0 or bank 1.
NTF trapRSW200AlarmDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.8			This trap is issued when the Alarm Data CRC is incorrect.
NTF trapRSW200FactoryDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.9			This trap is issued when the Factory Data CRC is incorrect.
NTF trapRSW200InputSwitchedAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.10			This trap is issued when the RF input switched.
NTF trapRSW200ResetFactoryDefaultAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.11			This trap is issued when the Factory Default Reset occurs.
NTF trapRSW200SecondaryInputActiveAlarm	1.3.6.1.4.1.1166.6.1.2.8.0.12			This trap is issued when the scondary input becomes active.
gx2Rsw200Descriptor	1.3.6.1.4.1.1166.6.1.2.8.1
gx2Rsw200AnalogTable	1.3.6.1.4.1.1166.6.1.2.8.2		not-accessible	This table contains gx2Rsw200 specific parameters with nominal and current values.
gx2Rsw200AnalogEntry	1.3.6.1.4.1.1166.6.1.2.8.2.1		not-accessible	This list contains the analog parameters and descriptions.
INT gx2Rsw200AnalogTableIndex	1.3.6.1.4.1.1166.6.1.2.8.2.1.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR rsw200labelModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.2	DisplayString	read-only	The value of this object provides the label of the Module Temperature Analog parameter.
STR rsw200uomModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.3	DisplayString	read-only	The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
FLO rsw200majorHighModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.4	Float	read-only	The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200majorLowModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.5	Float	read-only	The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200minorHighModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.6	Float	read-only	The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200minorLowModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.7	Float	read-only	The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200currentValueModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.8	Float	read-only	The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT rsw200stateFlagModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.9	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO rsw200minValueModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.10	Float	read-only	The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200maxValueModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.11	Float	read-only	The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT rsw200alarmStateModTemp	1.3.6.1.4.1.1166.6.1.2.8.2.1.12	INTEGER	read-only	The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
STR rsw200labelFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.13	DisplayString	read-only	The value of this object provides the label of the Fan Current Analog parameter.
STR rsw200uomFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.14	DisplayString	read-only	The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
FLO rsw200majorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.15	Float	read-only	The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200majorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.16	Float	read-only	The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200minorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.17	Float	read-only	The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200minorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.18	Float	read-only	The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200currentValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.19	Float	read-only	The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT rsw200stateFlagFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.20	INTEGER	read-only	The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO rsw200minValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.21	Float	read-only	The value of this object provides the minimum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rsw200maxValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.22	Float	read-only	The value of this object provides the maximum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT rsw200alarmStateFanCurrent	1.3.6.1.4.1.1166.6.1.2.8.2.1.23	INTEGER	read-only	The value of this object provides the curent alarm state of the Fan Current Analog parameter.
gx2Rsw200DigitalTable	1.3.6.1.4.1.1166.6.1.2.8.3		not-accessible	This table contains gx2Rsw200 specific parameters with nominal and current values.
gx2Rsw200DigitalEntry	1.3.6.1.4.1.1166.6.1.2.8.3.2		not-accessible	This list contains digital parameters and descriptions.
INT gx2Rsw200DigitalTableIndex	1.3.6.1.4.1.1166.6.1.2.8.3.2.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR rsw200labelSwitchControl	1.3.6.1.4.1.1166.6.1.2.8.3.2.2	DisplayString	read-only	The value of this object provides the label of the Switch Control Digital parameter.
STR rsw200enumSwitchControl	1.3.6.1.4.1.1166.6.1.2.8.3.2.3	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT rsw200valueSwitchControl	1.3.6.1.4.1.1166.6.1.2.8.3.2.4	INTEGER	read-write	The value of this object is the current value of the parameter.
INT rsw200stateflagSwitchControl	1.3.6.1.4.1.1166.6.1.2.8.3.2.5	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelRevertMode	1.3.6.1.4.1.1166.6.1.2.8.3.2.6	DisplayString	read-only	The value of this object provides the label of the Revert Mode Digital parameter.
STR rsw200enumRevertMode	1.3.6.1.4.1.1166.6.1.2.8.3.2.7	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT rsw200valueRevertMode	1.3.6.1.4.1.1166.6.1.2.8.3.2.8	INTEGER	read-write	The value of this object is the current value of the parameter.
INT rsw200stateflagRevertMode	1.3.6.1.4.1.1166.6.1.2.8.3.2.9	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelRevertTime	1.3.6.1.4.1.1166.6.1.2.8.3.2.10	DisplayString	read-only	The value of this object provides the label of the Revert Time Digital parameter.
STR rsw200enumRevertTime	1.3.6.1.4.1.1166.6.1.2.8.3.2.11	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT rsw200valueRevertTime	1.3.6.1.4.1.1166.6.1.2.8.3.2.12	INTEGER	read-write	The value of this object is the current value of the parameter.
INT rsw200stateflagRevertTime	1.3.6.1.4.1.1166.6.1.2.8.3.2.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelSwitchState	1.3.6.1.4.1.1166.6.1.2.8.3.2.14	DisplayString	read-only	The value of this object provides the label of the Switch State Digital parameter.
STR rsw200enumSwitchState	1.3.6.1.4.1.1166.6.1.2.8.3.2.15	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT rsw200valueSwitchState	1.3.6.1.4.1.1166.6.1.2.8.3.2.16	INTEGER	read-only	The value of this object is the current value of the parameter.
INT rsw200stateflagSwitchState	1.3.6.1.4.1.1166.6.1.2.8.3.2.17	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelPriStatus	1.3.6.1.4.1.1166.6.1.2.8.3.2.18	DisplayString	read-only	The value of this object provides the label of the Primary Signal Status Digital parameter.
STR rsw200enumPriStatus	1.3.6.1.4.1.1166.6.1.2.8.3.2.19	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT rsw200valuePriStatus	1.3.6.1.4.1.1166.6.1.2.8.3.2.20	INTEGER	read-only	The value of this object is the current value of the parameter.
INT rsw200stateflagPriStatus	1.3.6.1.4.1.1166.6.1.2.8.3.2.21	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelSecStatus	1.3.6.1.4.1.1166.6.1.2.8.3.2.22	DisplayString	read-only	The value of this object provides the label of the Secondary Signal Status Digital parameter.
STR rsw200enumSecStatus	1.3.6.1.4.1.1166.6.1.2.8.3.2.23	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT rsw200valueSecStatus	1.3.6.1.4.1.1166.6.1.2.8.3.2.24	INTEGER	read-only	The value of this object is the current value of the parameter.
INT rsw200stateflagSecStatus	1.3.6.1.4.1.1166.6.1.2.8.3.2.25	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelFactoryDefault	1.3.6.1.4.1.1166.6.1.2.8.3.2.26	DisplayString	read-only	The value of this object provides the label of the Factory Default Reset Digital parameter.
STR rsw200enumFactoryDefault	1.3.6.1.4.1.1166.6.1.2.8.3.2.27	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT rsw200valueFactoryDefault	1.3.6.1.4.1.1166.6.1.2.8.3.2.28	INTEGER	read-write	The value of this object is the current value of the parameter.
INT rsw200stateflagFactoryDefault	1.3.6.1.4.1.1166.6.1.2.8.3.2.29	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
gx2Rsw200StatusTable	1.3.6.1.4.1.1166.6.1.2.8.4		not-accessible	This table contains gx2Rsw200 specific parameters with nominal and current values.
gx2Rsw200StatusEntry	1.3.6.1.4.1.1166.6.1.2.8.4.3		not-accessible	This list contains Status parameters and descriptions.
INT gx2Rsw200StatusTableIndex	1.3.6.1.4.1.1166.6.1.2.8.4.3.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR rsw200labelBoot	1.3.6.1.4.1.1166.6.1.2.8.4.3.2	DisplayString	read-only	The value of this object provides the label of the Boot Status Status parameter.
INT rsw200valueBoot	1.3.6.1.4.1.1166.6.1.2.8.4.3.3	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT rsw200stateflagBoot	1.3.6.1.4.1.1166.6.1.2.8.4.3.4	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelFlash	1.3.6.1.4.1.1166.6.1.2.8.4.3.5	DisplayString	read-only	The value of this object provides the label of the Flash Status Status parameter.
INT rsw200valueFlash	1.3.6.1.4.1.1166.6.1.2.8.4.3.6	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT rsw200stateflagFlash	1.3.6.1.4.1.1166.6.1.2.8.4.3.7	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.8.4.3.8	DisplayString	read-only	The value of this object provides the label of the Factory Data CRC Status parameter.
INT rsw200valueFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.8.4.3.9	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT rsw200stateflagFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.8.4.3.10	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.8.4.3.11	DisplayString	read-only	The value of this object provides the label of the Alarm Data Crc parameter.
INT rsw200valueAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.8.4.3.12	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT rsw200stateflagAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.8.4.3.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelRFSignalStatus	1.3.6.1.4.1.1166.6.1.2.8.4.3.14	DisplayString	read-only	The value of this object provides the label of the RF Signal Status parameter.
INT rsw200valueRFSignalStatus	1.3.6.1.4.1.1166.6.1.2.8.4.3.15	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT rsw200stateflagRFSignalStatus	1.3.6.1.4.1.1166.6.1.2.8.4.3.16	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR rsw200labelPriActiveStatus	1.3.6.1.4.1.1166.6.1.2.8.4.3.17	DisplayString	read-only	The value of this object provides the label of the Secondary Active Status parameter.
INT rsw200valuePriActiveStatus	1.3.6.1.4.1.1166.6.1.2.8.4.3.18	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT rsw200stateflagPriActiveStatus	1.3.6.1.4.1.1166.6.1.2.8.4.3.19	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
gx2Rsw200FactoryTable	1.3.6.1.4.1.1166.6.1.2.8.5		not-accessible	This table contains gx2Rsw200 specific parameters with nominal and current values.
gx2Rsw200FactoryEntry	1.3.6.1.4.1.1166.6.1.2.8.5.4		not-accessible	This list contains Factory parameters and descriptions.
INT gx2Rsw200FactoryTableIndex	1.3.6.1.4.1.1166.6.1.2.8.5.4.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT rsw200bootControlByte	1.3.6.1.4.1.1166.6.1.2.8.5.4.2	INTEGER	read-only	The value of this object indicates which bank the firmware is currently being boot from.
INT rsw200bootStatusByte	1.3.6.1.4.1.1166.6.1.2.8.5.4.3	INTEGER	read-only	This object indicates the status of the last boot
INT rsw200bank1CRC	1.3.6.1.4.1.1166.6.1.2.8.5.4.4	INTEGER	read-only	This object provides the CRC code of bank 0.
INT rsw200bank2CRC	1.3.6.1.4.1.1166.6.1.2.8.5.4.5	INTEGER	read-only	This object provides the CRC code of bank 1.
INT rsw200prgEEPROMByte	1.3.6.1.4.1.1166.6.1.2.8.5.4.6	INTEGER	read-only	This object indicates if the EEPROM has been programmed
INT rsw200factoryCRC	1.3.6.1.4.1.1166.6.1.2.8.5.4.7	INTEGER	read-only	This object provides the CRC code for the Factory data.
INT rsw200calculateCRC	1.3.6.1.4.1.1166.6.1.2.8.5.4.8	INTEGER	read-only	This object indicates which of the Emnums will have the CRC calculated.
INT rsw200hourMeter	1.3.6.1.4.1.1166.6.1.2.8.5.4.9	INTEGER	read-only	This object provides the hour meter reading of the module.
INT rsw200flashPrgCntA	1.3.6.1.4.1.1166.6.1.2.8.5.4.10	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
INT rsw200flashPrgCntB	1.3.6.1.4.1.1166.6.1.2.8.5.4.11	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
STR rsw200flashBankARev	1.3.6.1.4.1.1166.6.1.2.8.5.4.12	DisplayString	read-only	This object provides the revision of flash bank 0.
STR rsw200flashBankBRev	1.3.6.1.4.1.1166.6.1.2.8.5.4.13	DisplayString	read-only	This object provides the revision of flash bank 1.
gx2Rsw200bHoldTimeTable	1.3.6.1.4.1.1166.6.1.2.8.6		not-accessible	This table contains gx2Rsw200b specific parameters with nominal and current values.
gx2Rsw200bHoldTimeEntry	1.3.6.1.4.1.1166.6.1.2.8.6.5		not-accessible	This list contains digital product class and the associated RF channel parameters and descriptions.
INT rxgx2Rsw200bHoldTimeTableIndex	1.3.6.1.4.1.1166.6.1.2.8.6.5.1	INTEGER	read-only	The value of this object is the index of the data object.
INT rxgx2Rsw200bHoldTimeSpecIndex	1.3.6.1.4.1.1166.6.1.2.8.6.5.2	INTEGER	read-only	The value of this object identifies the index of the alarm object to be modified.
INT rxgx2Rsw200bHoldTimeData	1.3.6.1.4.1.1166.6.1.2.8.6.5.3	INTEGER	read-write	The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.

RFC description

Manages gx2Rsw200 RF Switch Module devices in HFC networks with device descriptors and network element parameters for current topology.

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RSW200 200 MHz RF switch module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNI-gx2RSW200-MIB

What Is OMNI-gx2RSW200-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description