All MIBs › OMNI-gx2RSW200-MIB › rxgx2Rsw200bHoldTimeData
rxgx2Rsw200bHoldTimeData
Module: OMNI-gx2RSW200-MIB
OID (symbolic): OMNI-gx2RSW200-MIB::rxgx2Rsw200bHoldTimeData
OID (numeric): 1.3.6.1.4.1.1166.6.1.2.8.6.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
What is rxgx2Rsw200bHoldTimeData?
Read-write 32-bit integer that packs validation data and a hold-time value (0 to 1300 seconds) used to suppress noisy, short-lived alarm transitions on the module's analog objects; an admin raises this value to make an alarm wait longer before clearing/re-triggering on flapping readings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.8.6.5.3 snmpwalk -v2c -c public <target> OMNI-gx2RSW200-MIB::rxgx2Rsw200bHoldTimeData
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.8.6.5.3.1 snmpget -v2c -c public <target> OMNI-gx2RSW200-MIB::rxgx2Rsw200bHoldTimeData.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.6.1.2.8.6.5.3.1 i <value>
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RSW200 200 MHz RF switch module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2RSW200-MIB::rxgx2Rsw200bHoldTimeData OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 RSW200 200 MHz RF switch module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6 | motproxies | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6.1 | hfc | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2 | hfcDevices | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2.8 | gx2Rsw200 | GX2HFC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.8.6 | gx2Rsw200bHoldTimeTable | OMNI-gx2RSW200-MIB |
| 1.3.6.1.4.1.1166.6.1.2.8.6.5 | gx2Rsw200bHoldTimeEntry | OMNI-gx2RSW200-MIB |
| 1.3.6.1.4.1.1166.6.1.2.8.6.5.3 | rxgx2Rsw200bHoldTimeData | OMNI-gx2RSW200-MIB |