OMNI-gx2RSW200-MIB :: rsw200bank1CRC

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › OMNI-gx2RSW200-MIB › rsw200bank1CRC

rsw200bank1CRC

Module: OMNI-gx2RSW200-MIB

OID (symbolic): OMNI-gx2RSW200-MIB::rsw200bank1CRC

OID (numeric): 1.3.6.1.4.1.1166.6.1.2.8.5.4.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object provides the CRC code of bank 0.

What is rsw200bank1CRC?

Read-only integer giving the checksum (CRC) computed over one of the two firmware flash banks, used to verify that the firmware image in that bank has not been corrupted.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.8.5.4.4
snmpwalk -v2c -c public <target> OMNI-gx2RSW200-MIB::rsw200bank1CRC

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.8.5.4.4.1
snmpget -v2c -c public <target> OMNI-gx2RSW200-MIB::rsw200bank1CRC.1

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RSW200 200 MHz RF switch module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2RSW200-MIB::rsw200bank1CRC OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 RSW200 200 MHz RF switch module) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.6motproxiesBCS-IDENT-MIB
1.3.6.1.4.1.1166.6.1hfcGX2HFC-MIB
1.3.6.1.4.1.1166.6.1.2hfcDevicesGX2HFC-MIB
1.3.6.1.4.1.1166.6.1.2.8gx2Rsw200GX2HFC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.6.1.2.8.5gx2Rsw200FactoryTableOMNI-gx2RSW200-MIB
1.3.6.1.4.1.1166.6.1.2.8.5.4gx2Rsw200FactoryEntryOMNI-gx2RSW200-MIB
1.3.6.1.4.1.1166.6.1.2.8.5.4.4rsw200bank1CRCOMNI-gx2RSW200-MIB