OMNI-gx2Lm1000s-MIB

All MIBs › OMNI-gx2Lm1000s-MIB

Category: Cable/DOCSIS

Description: Manages the Cisco/Scientific-Atlanta GX2 LM1000S 1000 MHz laser module in HFC optical node deployments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNI-gx2Lm1000s-MIB?

OMNI-gx2Lm1000s-MIB is a Blonder Tongue (BBN/GX2 HFC headend heritage) proprietary MIB reporting gx2Lm1000s (a 1000-series laser-transmitter module) analog telemetry against nominal ranges. Its analog table, keyed by index, records per-parameter (offset-from-nominal monitor, laser power, and others) label, unit of measure, major/minor high/low threshold, current value, state flag, min/max recorded value, and alarm state, while companion digital/status/factory tables cover discrete status and factory-set data. As a hardware-performance MIB it lets an administrator watch a gx2Lm1000s laser transmitter's power output against alarm thresholds in an HFC headend. It is deployed on Blonder Tongue (GX2) HFC headend equipment. Engineers can download the OMNI-gx2Lm1000s-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2Lm1000s-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General Instrument OmniStar GX2 HFC headend/optical node (gx2Lm1000s 1000-series laser transmitter module)

Monitoring Examples

An administrator monitors lm1000scurrentValueOffsetNomMonitor against lm1000smajorHighOffsetNomMonitor to catch a laser transmitter drifting out of tolerance in an HFC headend.

What Can Be Monitored

gx2Lm1000s laser transmitter telemetry vs. alarm thresholds

Imported Objects

From GX2HFC-MIB

gx2Lm1000s

OBJECT-IDENTITY

From NLS-BBNIDENT-MIB

gi	OBJECT-IDENTITY
motproxies	OBJECT-IDENTITY

From NLSBBN-TRAPS-MIB

trapChangedObjectId	OBJECT-TYPE
trapChangedValueDisplayString	OBJECT-TYPE
trapChangedValueInteger	OBJECT-TYPE
trapIdentifier	OBJECT-TYPE
trapNETrapLastTrapTimeStamp	OBJECT-TYPE
trapNetworkElemAdminState	OBJECT-TYPE
trapNetworkElemAlarmStatus	OBJECT-TYPE
trapNetworkElemAvailStatus	OBJECT-TYPE
trapNetworkElemModelNumber	OBJECT-TYPE
trapNetworkElemOperState	OBJECT-TYPE
trapNetworkElemSerialNum	OBJECT-TYPE
trapPerceivedSeverity	OBJECT-TYPE
trapText	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks

From RFC1213-MIB

DisplayString
sysUpTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF trapLM1000SConfigChangeInteger	1.3.6.1.4.1.1166.6.1.2.31.0.1			This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapLM1000SConfigChangeDisplayString	1.3.6.1.4.1.1166.6.1.2.31.0.2			This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapLM1000SfanCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.3			This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapLM1000SModuleTempAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.4			This trap is issued when the Module Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapLM1000SomiOffsetAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.5			This trap is issued when the OMI Offset goes out of range.
NTF trapLM1000StecCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.6			This trap is issued when the TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapLM1000SLaserCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.7			This trap is issued when the Laser Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapLM1000SLaserTempAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.8			This trap is issued when the Laser Temp parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapLM1000SLaserPowerAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.9			This trap is issued when the Laser Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapLM1000SFlashAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.10			This trap is issued when the Laser Modules detects an error during Flash memory operations.
NTF trapLM1000SBankBootAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.11			This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1.
NTF trapLM1000SAlarmDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.12			This trap is issued when the Alarm Data CRC is incorrect.
NTF trapLM1000SFactoryDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.13			This trap is issued when the Factory Data CRC is incorrect.
NTF trapLM1000SCalDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.14			This trap is issued when the Cal Data CRC is incorrect.
NTF trapLM1000SResetFacDefault	1.3.6.1.4.1.1166.6.1.2.31.0.15			This trap is issued when the LM1000S resets to factory defaults
NTF trapLM1000SUserRFOffAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.16			This trap is issued when the the User RF is turned off.
NTF trapLM1000SUserOpticalOffAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.17			This trap is issued when the User Optical Power is turned off.
NTF trapLM1000SUserSBSOffAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.18			This trap is issued when the User SBS is turned off.
NTF trapLM1000SRFInputAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.19			This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapLM1000SRFOverloadAlarm	1.3.6.1.4.1.1166.6.1.2.31.0.20			This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
gx2Lm1000sDescriptor	1.3.6.1.4.1.1166.6.1.2.31.1
gx2Lm1000sAnalogTable	1.3.6.1.4.1.1166.6.1.2.31.2		not-accessible	This table contains gx2Lm1000s specific parameters with nominal and current values.
gx2Lm1000sAnalogEntry	1.3.6.1.4.1.1166.6.1.2.31.2.1		not-accessible	This list contains the analog parameters and descriptions.
INT gx2Lm1000sAnalogTableIndex	1.3.6.1.4.1.1166.6.1.2.31.2.1.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR lm1000slabelOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.2	DisplayString	read-only	The value of this object provides the label of the Offset Monitor Analog parameter.
STR lm1000suomOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.3	DisplayString	read-only	The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter. The unit of measure for this parameter is dB
FLO lm1000smajorHighOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.4	Float	read-only	The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000smajorLowOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.5	Float	read-only	The value of this object provides the Major Low alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000sminorHighOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.6	Float	read-only	The value of this object provides the Minor High alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000sminorLowOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.7	Float	read-only	The value of this object provides the Minor Low alarm value of the Offset Monitor Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000scurrentValueOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.8	Float	read-only	The value of this object provides the Current value of the Offset Monitor Power Analog parameter.
INT lm1000sstateFlagOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.9	INTEGER	read-only	The value of this object provides the state of the Offset Monitor Power Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO lm1000sminValueOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.10	Float	read-only	The value of this object provides the minimum value the Offset Monitor Power Analog parameter can achive.
FLO lm1000smaxValueOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.11	Float	read-only	The value of this object provides the maximum value the Offset Monitor Power Analog parameter can achive.
INT lm1000salarmStateOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.31.2.1.12	INTEGER	read-only	The value of this object provides the curent alarm state of the Offset Monitor Power Analog parameter.
STR lm1000slabelLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.13	DisplayString	read-only	The value of this object provides the label of the Laser Optical Power Analog parameter.
STR lm1000suomLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.14	DisplayString	read-only	The value of this object provides the Unit of Measure of the Laser Optical Power Analog parameter. The unit of measure for this parameter is dBm
FLO lm1000smajorHighLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.15	Float	read-only	The value of this object provides the Major High alarm value of the Laser Optical Power Analog parameter.
FLO lm1000smajorLowLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.16	Float	read-only	The value of this object provides the Major Low alarm value of the Laser Optical Power Analog parameter.
FLO lm1000sminorHighLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.17	Float	read-only	The value of this object provides the Minor High alarm value of the Laser Optical Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000sminorLowLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.18	Float	read-only	The value of this object provides the Minor Low alarm value of the Laser Optical Power Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000scurrentValueLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.19	Float	read-only	The value of this object provides the Current value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT lm1000sstateFlagLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.20	INTEGER	read-only	The value of this object provides the state of the Laser Optical Power Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO lm1000sminValueLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.21	Float	read-only	The value of this object provides the minimum value the Laser Optical Power Analog parameter can achive.
FLO lm1000smaxValueLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.22	Float	read-only	The value of this object provides the maximum value the Laser Optical Power Analog parameter can achive.
INT lm1000salarmStateLaserPower	1.3.6.1.4.1.1166.6.1.2.31.2.1.23	INTEGER	read-only	The value of this object provides the curent alarm state of the Laser Optical Power Analog parameter.
STR lm1000slabelLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.24	DisplayString	read-only	The value of this object provides the label of the Laser Temperature Analog parameter.
STR lm1000suomLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.25	DisplayString	read-only	The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter. The unit of measure for this parameter is degrees C
FLO lm1000smajorHighLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.26	Float	read-only	The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter.
FLO lm1000smajorLowLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.27	Float	read-only	The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter.
FLO lm1000sminorHighLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.28	Float	read-only	The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter.
FLO lm1000sminorLowLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.29	Float	read-only	The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter.
FLO lm1000scurrentValueLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.30	Float	read-only	The value of this object provides the Current value of the Laser Temperature Analog parameter.
INT lm1000sstateFlagLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.31	INTEGER	read-only	The value of this object provides the state of the Laser Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO lm1000sminValueLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.32	Float	read-only	The value of this object provides the minimum value the Laser Temperature Analog parameter can achive.
FLO lm1000smaxValueLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.33	Float	read-only	The value of this object provides the maximum value the Laser Temperature Analog parameter can achive.
INT lm1000salarmStateLaserTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.34	INTEGER	read-only	The value of this object provides the curent alarm state of the Laser Temperature Analog parameter.
STR lm1000slabelLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.35	DisplayString	read-only	The value of this object provides the label of the Laser Bias Current Analog parameter.
STR lm1000suomLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.36	DisplayString	read-only	The value of this object provides the Unit of Measure of the Laser Bias Current Analog parameter. The unit of measure for this parameter is mA
FLO lm1000smajorHighLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.37	Float	read-only	The value of this object provides the Major High alarm value of the Laser Bias Current Analog parameter.
FLO lm1000smajorLowLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.38	Float	read-only	The value of this object provides the Major Low alarm value of the Laser Bias Current Analog parameter.
FLO lm1000sminorHighLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.39	Float	read-only	The value of this object provides the Minor High alarm value of the Laser Bias Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000sminorLowLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.40	Float	read-only	The value of this object provides the Minor Low alarm value of the Laser Bias Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000scurrentValueLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.41	Float	read-only	The value of this object provides the Current value of the Laser Bias Current Analog parameter.
INT lm1000sstateFlagLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.42	INTEGER	read-only	The value of this object provides the state of the Laser Bias Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO lm1000sminValueLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.43	Float	read-only	The value of this object provides the minimum value the Laser Bias Current Analog parameter can achive.
FLO lm1000smaxValueLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.44	Float	read-only	The value of this object provides the maximum value the Laser Bias Current Analog parameter can achive.
INT lm1000salarmStateLaserCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.45	INTEGER	read-only	The value of this object provides the curent alarm state of the Laser Bias Current Analog parameter.
STR lm1000slabelTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.46	DisplayString	read-only	The value of this object provides the label of the TEC Current Analog parameter.
STR lm1000suomTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.47	DisplayString	read-only	The value of this object provides the Unit of Measure of the TEC Current Analog parameter. The unit of measure for this parameter is mA
FLO lm1000smajorHighTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.48	Float	read-only	The value of this object provides the Major High alarm value of the TEC Current Analog parameter.
FLO lm1000smajorLowTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.49	Float	read-only	The value of this object provides the Major Low alarm value of the TEC Current Analog parameter.
FLO lm1000sminorHighTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.50	Float	read-only	The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000sminorLowTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.51	Float	read-only	The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000scurrentValueTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.52	Float	read-only	The value of this object provides the Current value of the TEC Current Analog parameter.
INT lm1000sstateFlagTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.53	INTEGER	read-only	The value of this object provides the state of the TEC Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO lm1000sminValueTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.54	Float	read-only	The value of this object provides the minimum value the TEC Current Analog parameter can achive.
FLO lm1000smaxValueTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.55	Float	read-only	The value of this object provides the maximum value the TEC Current Analog parameter can achive.
INT lm1000salarmStateTecCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.56	INTEGER	read-only	The value of this object provides the curent alarm state of the TEC Current Analog parameter.
STR lm1000slabelModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.57	DisplayString	read-only	The value of this object provides the label of the Module Temperature Analog parameter.
STR lm1000suomModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.58	DisplayString	read-only	The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. The unit of measure for this parameter is degrees C
FLO lm1000smajorHighModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.59	Float	read-only	The value of this object provides the Major High alarm value of the Module Temperature Analog parameter.
FLO lm1000smajorLowModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.60	Float	read-only	The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
FLO lm1000sminorHighModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.61	Float	read-only	The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
FLO lm1000sminorLowModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.62	Float	read-only	The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
FLO lm1000scurrentValueModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.63	Float	read-only	The value of this object provides the Current value of the Module Temperature Analog parameter.
INT lm1000sstateFlagModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.64	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO lm1000sminValueModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.65	Float	read-only	The value of this object provides the minimum value the Module Temperature Analog parameter can achive.
FLO lm1000smaxValueModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.66	Float	read-only	The value of this object provides the maximum value the Module Temperature Analog parameter can achive.
INT lm1000salarmStateModTemp	1.3.6.1.4.1.1166.6.1.2.31.2.1.67	INTEGER	read-only	The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
STR lm1000slabelFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.68	DisplayString	read-only	The value of this object provides the label of the Fan Current Analog parameter.
STR lm1000suomFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.69	DisplayString	read-only	The value of this object provides the Unit of Measure of the Fan Current Analog parameter. The unit of measure for this parameter is mA
FLO lm1000smajorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.70	Float	read-only	The value of this object provides the Major High alarm value of the Fan Current Analog parameter.
FLO lm1000smajorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.71	Float	read-only	The value of this object provides the Major Low alarm value of the Fan Current Analog parameter.
FLO lm1000sminorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.72	Float	read-only	The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000sminorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.73	Float	read-only	The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence.
FLO lm1000scurrentValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.74	Float	read-only	The value of this object provides the Current value of the Fan Current Analog parameter.
INT lm1000sstateFlagFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.75	INTEGER	read-only	The value of this object provides the state of the Fan Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO lm1000sminValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.76	Float	read-only	The value of this object provides the minimum value the Fan Current Analog parameter can achive.
FLO lm1000smaxValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.77	Float	read-only	The value of this object provides the maximum value the Fan Current Analog parameter can achive.
INT lm1000salarmStateFanCurrent	1.3.6.1.4.1.1166.6.1.2.31.2.1.78	INTEGER	read-only	The value of this object provides the curent alarm state of the Fan Current Analog parameter.
gx2Lm1000sDigitalTable	1.3.6.1.4.1.1166.6.1.2.31.3		not-accessible	This table contains gx2Lm1000sm specific parameters with nominal and current values.
gx2Lm1000sDigitalEntry	1.3.6.1.4.1.1166.6.1.2.31.3.2		not-accessible	This list contains digital parameters and descriptions.
INT gx2Lm1000sDigitalTableIndex	1.3.6.1.4.1.1166.6.1.2.31.3.2.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR lm1000slabelRfInput	1.3.6.1.4.1.1166.6.1.2.31.3.2.2	DisplayString	read-only	The value of this object provides the label of the RF Input Control Digital parameter.
STR lm1000senumRfInput	1.3.6.1.4.1.1166.6.1.2.31.3.2.3	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT lm1000svalueRfInput	1.3.6.1.4.1.1166.6.1.2.31.3.2.4	INTEGER	read-write	The value of this object is the current value of the parameter.
INT lm1000sstateflagRfInput	1.3.6.1.4.1.1166.6.1.2.31.3.2.5	INTEGER	read-only	The value of this object provides the state of the RF Input Control Digital parameter. (1-hidden 2-read-only, 3-updateable).
STR lm1000slabelOptOutput	1.3.6.1.4.1.1166.6.1.2.31.3.2.6	DisplayString	read-only	The value of this object provides the label of the Optical Output Control Digital parameter.
STR lm1000senumOptOutput	1.3.6.1.4.1.1166.6.1.2.31.3.2.7	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT lm1000svalueOptOutput	1.3.6.1.4.1.1166.6.1.2.31.3.2.8	INTEGER	read-write	The value of this object is the current value of the parameter.
INT lm1000sstateflagOptOutput	1.3.6.1.4.1.1166.6.1.2.31.3.2.9	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
STR lm1000slabelAttnSetting	1.3.6.1.4.1.1166.6.1.2.31.3.2.10	DisplayString	read-only	The value of this object provides the label of the Attenuation Setting Digital parameter.
STR lm1000senumAttnSetting	1.3.6.1.4.1.1166.6.1.2.31.3.2.11	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT lm1000svalueAttnSetting	1.3.6.1.4.1.1166.6.1.2.31.3.2.12	INTEGER	read-write	The value of this object is the current value of the parameter. Each step indicates a .5dB change in attenuation Its range is 0 to 15 dB
INT lm1000sstateflagAttnSetting	1.3.6.1.4.1.1166.6.1.2.31.3.2.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
STR lm1000slabelFactoryDefault	1.3.6.1.4.1.1166.6.1.2.31.3.2.14	DisplayString	read-only	The value of this object provides the label of the Factory Default Digital parameter.
STR lm1000senumFactoryDefault	1.3.6.1.4.1.1166.6.1.2.31.3.2.15	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1..
INT lm1000svalueFactoryDefault	1.3.6.1.4.1.1166.6.1.2.31.3.2.16	INTEGER	read-write	The value of this object is the current value of the parameter. Return value is meaningless
INT lm1000sstateflagFactoryDefault	1.3.6.1.4.1.1166.6.1.2.31.3.2.17	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
gx2Lm1000sStatusTable	1.3.6.1.4.1.1166.6.1.2.31.4		not-accessible	This table contains gx2Lm1000s specific parameters with nominal and current values.
gx2Lm1000sStatusEntry	1.3.6.1.4.1.1166.6.1.2.31.4.3		not-accessible	This list contains Status parameters and descriptions.
INT gx2Lm1000sStatusTableIndex	1.3.6.1.4.1.1166.6.1.2.31.4.3.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR lm1000slabelBoot	1.3.6.1.4.1.1166.6.1.2.31.4.3.2	DisplayString	read-only	The value of this object provides the label of the Boot Status Status parameter.
INT lm1000svalueBoot	1.3.6.1.4.1.1166.6.1.2.31.4.3.3	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT lm1000sstateflagBoot	1.3.6.1.4.1.1166.6.1.2.31.4.3.4	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
STR lm1000slabelFlash	1.3.6.1.4.1.1166.6.1.2.31.4.3.5	DisplayString	read-only	The value of this object provides the label of the Flash Status Status parameter.
INT lm1000svalueFlash	1.3.6.1.4.1.1166.6.1.2.31.4.3.6	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT lm1000sstateflagFlash	1.3.6.1.4.1.1166.6.1.2.31.4.3.7	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
STR lm1000slabelFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.31.4.3.8	DisplayString	read-only	The value of this object provides the label of the Factory Data CRC Status parameter.
INT lm1000svalueFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.31.4.3.9	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT lm1000sstateflagFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.31.4.3.10	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
STR lm1000slabelLaserDataCRC	1.3.6.1.4.1.1166.6.1.2.31.4.3.11	DisplayString	read-only	The value of this object provides the label of the Laser Data CRC Status parameter.
INT lm1000svalueLaserDataCRC	1.3.6.1.4.1.1166.6.1.2.31.4.3.12	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT lm1000sstateflagLaserDataCRC	1.3.6.1.4.1.1166.6.1.2.31.4.3.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
STR lm1000slabelAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.31.4.3.14	DisplayString	read-only	The value of this object provides the label of the Alarm Data Crc parameter.
INT lm1000svalueAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.31.4.3.15	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT lm1000sstateflagAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.31.4.3.16	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
STR lm1000slabelRFInputStatus	1.3.6.1.4.1.1166.6.1.2.31.4.3.17	DisplayString	read-only	The value of this object provides the label of the Alarm Data Crc parameter.
INT lm1000svalueRFInputStatus	1.3.6.1.4.1.1166.6.1.2.31.4.3.18	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT lm1000sstateflagRFInputStatus	1.3.6.1.4.1.1166.6.1.2.31.4.3.19	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
gx2Lm1000sFactoryTable	1.3.6.1.4.1.1166.6.1.2.31.5		not-accessible	This table contains gx2Lm1000s specific parameters with nominal and current values.
gx2Lm1000sFactoryEntry	1.3.6.1.4.1.1166.6.1.2.31.5.4		not-accessible	This list contains Factory parameters and descriptions.
INT gx2Lm1000sFactoryTableIndex	1.3.6.1.4.1.1166.6.1.2.31.5.4.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT lm1000sbootControlByte	1.3.6.1.4.1.1166.6.1.2.31.5.4.2	INTEGER	read-only	The value of this object indicates which bank the firmware is currently being boot from.
INT lm1000sbootStatusByte	1.3.6.1.4.1.1166.6.1.2.31.5.4.3	INTEGER	read-only	This object indicates the status of the last boot. Bit 2 = Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail)
INT lm1000sbank1CRC	1.3.6.1.4.1.1166.6.1.2.31.5.4.4	INTEGER	read-only	This object provides the CRC code of bank 0. The display formate for the data is Hex.
INT lm1000sbank2CRC	1.3.6.1.4.1.1166.6.1.2.31.5.4.5	INTEGER	read-only	This object provides the CRC code of bank 1.The display formate for the data is Hex.
INT lm1000sprgEEPROMByte	1.3.6.1.4.1.1166.6.1.2.31.5.4.6	INTEGER	read-only	This object indicates if the EEPROM has been programmed
INT lm1000sfactoryCRC	1.3.6.1.4.1.1166.6.1.2.31.5.4.7	INTEGER	read-only	This object provides the CRC code for the Factory data.
INT lm1000scalculateCRC	1.3.6.1.4.1.1166.6.1.2.31.5.4.8	INTEGER	read-only	This object indicates which of the Enums will have the CRC calculated.
INT lm1000shourMeter	1.3.6.1.4.1.1166.6.1.2.31.5.4.9	INTEGER	read-only	This object provides the hour meter reading of the module.
INT lm1000sflashPrgCntA	1.3.6.1.4.1.1166.6.1.2.31.5.4.10	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
INT lm1000sflashPrgCntB	1.3.6.1.4.1.1166.6.1.2.31.5.4.11	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
STR lm1000sflashBankARev	1.3.6.1.4.1.1166.6.1.2.31.5.4.12	DisplayString	read-only	This object provides the revision of flash bank 0. The rev is 2 characters.
STR lm1000sflashBankBRev	1.3.6.1.4.1.1166.6.1.2.31.5.4.13	DisplayString	read-only	This object provides the revision of flash bank 1. The rev is 2 characters.

RFC description

Vendor-private MIB for OMNI GX2 LM1000s system management.

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (gx2Lm1000s 1000-series laser transmitter module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNI-gx2Lm1000s-MIB

What Is OMNI-gx2Lm1000s-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description