OACOMMON-MIB

All MIBs › OACOMMON-MIB

Organization: Open Access Pty Ltd.

Last Updated: 2016-10-05

Description: Open Access Pty Ltd MIB providing common identity, alarm status, uptime, and configuration objects for their NetSpire network devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OACOMMON-MIB?

OACOMMON-MIB is a vendor MIB from Open Access Pty Ltd (per module_desc, titled "NetSpire Device Common Detail") providing a common set of identity, status, and environmental objects shared across their NetSpire family of network devices. It exposes device identity data (name, unit location, serial number, production date), a general alarm status, and system health telemetry including uptime, current time/time source, restart count, storage used, CPU load, and system temperature. This MIB is squarely aimed at hardware/software status monitoring: netSpireDeviceUptime and netSpireDeviceRestartCount reveal stability and unexpected reboots, netSpireDeviceCPULoad and netSpireDeviceStorageUsed reveal resource exhaustion, netSpireDeviceSystemTemperature reveals thermal/environmental problems, and netSpireDeviceAlarmStatus surfaces an aggregate fault indicator. As a vendor-common MIB, it likely serves as a base module referenced by other NetSpire product-specific MIBs rather than depending on external standards itself. It is used to monitor the overall health of Open Access NetSpire network devices in field or carrier deployments, with OACOMMON-MIB SNMP polling as the primary mechanism.

IPNetwork Monitor allows you to monitor SNMP objects defined in OACOMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Open Access NetSpire network device

Monitoring Examples

A monitoring system would poll netSpireDeviceUptime and netSpireDeviceRestartCount together to detect an unexpected reboot, and check netSpireDeviceCPULoad, netSpireDeviceStorageUsed, and netSpireDeviceSystemTemperature to catch resource exhaustion or overheating before it causes an outage. netSpireDeviceAlarmStatus provides a quick top-level "device has an active alarm" flag that would trigger deeper investigation into the other counters. netspireDeviceName and netspireDeviceUnitLocation help identify which physical unit and site an alert refers to during triage.

What Can Be Monitored

device uptime
restart count
CPU load
storage used
system temperature
alarm status

Imported Objects

From OA-SMI

oacommon

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using netSpireDeviceFaultActive OID:

Select an Open Access NetSpire network device (identity, alarm, and system health telemetry) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type netSpireDeviceFaultActive into the Find box to locate it in the OID tree, then select it and click OK. It reports the whether the fault is active or not. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'Inactive', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
netspire	1.3.6.1.4.1.1732.2.1			NetSpire device Common Detail
STR netspireDeviceName	1.3.6.1.4.1.1732.2.1.1	DisplayString	read-only	NetSpire device name
STR netspireDeviceUnitLocation	1.3.6.1.4.1.1732.2.1.2	DisplayString	read-only	NetSpire device Unit location
STR netSpireDeviceAlarmStatus	1.3.6.1.4.1.1732.2.1.3	DisplayString	read-only	NetSpire device Alarm Status
INT netSpireDeviceUptime	1.3.6.1.4.1.1732.2.1.4	INTEGER	read-only	NetSpire device Uptime in Seconds
STR netSpireDeviceCurrentTime	1.3.6.1.4.1.1732.2.1.5	DisplayString	read-only	NetSpire device Current Wall Time
STR netSpireDeviceTimeSource	1.3.6.1.4.1.1732.2.1.6	DisplayString	read-only	NetSpire device Time Source
INT netSpireDeviceRestartCount	1.3.6.1.4.1.1732.2.1.7	INTEGER	read-only	NetSpire device Restart Count
INT netSpireDeviceStorageUsed	1.3.6.1.4.1.1732.2.1.8	INTEGER	read-only	NetSpire device Storage Percentage
INT netSpireDeviceCPULoad	1.3.6.1.4.1.1732.2.1.9	INTEGER	read-only	NetSpire device CPU Load Percentage
INT netSpireDeviceSystemTemperature	1.3.6.1.4.1.1732.2.1.10	INTEGER	read-only	NetSpire device System Temperature in Celsius
STR netSpireDeviceDeviceSerialNo	1.3.6.1.4.1.1732.2.1.11	DisplayString	read-only	NetSpire device Serial Number
STR netSpireDeviceProductionDate	1.3.6.1.4.1.1732.2.1.12	DisplayString	read-only	NetSpire device Production Date
STR netSpireDeviceHardwareRevision	1.3.6.1.4.1.1732.2.1.13	DisplayString	read-only	NetSpire device Hardware Revision
STR netSpireDeviceWarrantyExpiryDate	1.3.6.1.4.1.1732.2.1.14	DisplayString	read-only	NetSpire device Warranty Expiry Date
STR netSpireDeviceBootFirmwareVersion	1.3.6.1.4.1.1732.2.1.15	DisplayString	read-only	NetSpire device Boot Firmware Version
STR netSpireDeviceSystemFirmwareVersion	1.3.6.1.4.1.1732.2.1.16	DisplayString	read-only	NetSpire device System Firmware Version
INT netSpireDeviceFaultActiveEx	1.3.6.1.4.1.1732.2.1.17	INTEGER	read-only	Whether the fault is active or not.
STR netSpireDeviceAlarmDescription	1.3.6.1.4.1.1732.2.1.18	DisplayString	read-only	NetSpire device Alarm Description
INT netSpireDeviceNonAckFaultActive	1.3.6.1.4.1.1732.2.1.19	INTEGER	read-only	Whether an unacknowledged fault is active or not.
INT netSpireDeviceInfoFaultCount	1.3.6.1.4.1.1732.2.1.20	INTEGER	read-only	The number currently active alarms on the device where alarm severity is Info.
INT netSpireDeviceMinorFaultCount	1.3.6.1.4.1.1732.2.1.21	INTEGER	read-only	The number currently active alarms on the device where alarm severity is Minor.
INT netSpireDeviceMajorFaultCount	1.3.6.1.4.1.1732.2.1.22	INTEGER	read-only	The number currently active alarms on the device where alarm severity is Major.
INT netSpireDeviceSevereFaultCount	1.3.6.1.4.1.1732.2.1.23	INTEGER	read-only	The number currently active alarms on the device where alarm severity is Severe.
INT netSpireDeviceInfoNonAckFaultCount	1.3.6.1.4.1.1732.2.1.24	INTEGER	read-only	The number currently active alarms on the device that are not acknowledged where alarm severity is Info.
INT netSpireDeviceMinorNonAckFaultCount	1.3.6.1.4.1.1732.2.1.25	INTEGER	read-only	The number currently active alarms on the device that are not acknowledged where alarm severity is Minor.
INT netSpireDeviceMajorNonAckFaultCount	1.3.6.1.4.1.1732.2.1.26	INTEGER	read-only	The number currently active alarms on the device that are not acknowledged where alarm severity is Major.
INT netSpireDeviceSevereNonAckFaultCount	1.3.6.1.4.1.1732.2.1.27	INTEGER	read-only	The number currently active alarms on the device that are not acknowledged where alarm severity is Severe.
INT currentMaxFaultSeverity	1.3.6.1.4.1.1732.2.1.28	INTEGER	read-only	The maximum severity of all currently active alarms.
INT currentMaxNonAckFaultSeverity	1.3.6.1.4.1.1732.2.1.29	INTEGER	read-only	The maximum severity of all currently active and not acknowledged alarms.
faults	1.3.6.1.4.1.1732.2.1.32		not-accessible	A table containing the faults for the device.
fault	1.3.6.1.4.1.1732.2.1.32.1		not-accessible	device fault definition
INT type	1.3.6.1.4.1.1732.2.1.32.1.1	INTEGER	read-only	The type of the fault.
INT severity	1.3.6.1.4.1.1732.2.1.32.1.2	INTEGER	read-only	The severity of the fault.
STR errorText	1.3.6.1.4.1.1732.2.1.32.1.4	DisplayString	read-only	A human readable summary of the fault.
STR acknowledged	1.3.6.1.4.1.1732.2.1.32.1.5	DisplayString	read-only	Shows whether a user has acknowledged the fault.
STR device	1.3.6.1.4.1.1732.2.1.32.1.6	DisplayString	read-only	The device on which the alarm is active.
INT netspireDigitalInCount	1.3.6.1.4.1.1732.2.1.33	INTEGER	read-only	Number of Digital Inputs present
INT netspireDigitalOutCount	1.3.6.1.4.1.1732.2.1.34	INTEGER	read-only	Number of Digital Outputs present
netspireDigitalInTable	1.3.6.1.4.1.1732.2.1.36		read-only	Information for each Digital Input Port.
digitalInEntry	1.3.6.1.4.1.1732.2.1.36.1		read-only	Digital Input Port Information
INT digitalInPort	1.3.6.1.4.1.1732.2.1.36.1.1	INTEGER	read-only	Digital Intput port
STR digitalInName	1.3.6.1.4.1.1732.2.1.36.1.2	DisplayString	read-only	Digital Intput name
INT digitalInStatus	1.3.6.1.4.1.1732.2.1.36.1.3	INTEGER	read-only	Digital Input status
netspireDigitalOutTable	1.3.6.1.4.1.1732.2.1.37		read-only	Information for each Digital Output Port.
digitalOutEntry	1.3.6.1.4.1.1732.2.1.37.1		read-only	Digital Output Port Information
INT digitalOutPort	1.3.6.1.4.1.1732.2.1.37.1.1	INTEGER	read-only	Digital Output port
STR digitaloOutName	1.3.6.1.4.1.1732.2.1.37.1.2	DisplayString	read-only	Digital Output name
INT digitalOutStatus	1.3.6.1.4.1.1732.2.1.37.1.3	INTEGER	read-only	Digital Output status
STR netspireDeviceDescription	1.3.6.1.4.1.1732.2.1.40	DisplayString	read-only	NetSpire device Description
STR netspireDeviceModelName	1.3.6.1.4.1.1732.2.1.41	DisplayString	read-only	NetSpire device Model name
INT managedDeviceCount	1.3.6.1.4.1.1732.2.1.43	INTEGER	read-only	Managed device Count
INT managedDisplayCount	1.3.6.1.4.1.1732.2.1.44	INTEGER	read-only	Managed Display Count
managedDevicetable	1.3.6.1.4.1.1732.2.1.46		not-accessible	A table containing the managed device.
managedDevice	1.3.6.1.4.1.1732.2.1.46.1		not-accessible	Managed device
INT destinationNumber	1.3.6.1.4.1.1732.2.1.46.1.1	INTEGER	read-only	device Destination Number
STR name	1.3.6.1.4.1.1732.2.1.46.1.2	DisplayString	read-only	device name
STR location	1.3.6.1.4.1.1732.2.1.46.1.3	DisplayString	read-only	device location
STR iP	1.3.6.1.4.1.1732.2.1.46.1.4	DisplayString	read-only	Ip address
INT online	1.3.6.1.4.1.1732.2.1.46.1.5	INTEGER	read-only	whether a device is online or not
managedDisplaytable	1.3.6.1.4.1.1732.2.1.47		not-accessible	A table containing the managed display.
managedDisplay	1.3.6.1.4.1.1732.2.1.47.1		not-accessible	Managed Display
INT displayNumber	1.3.6.1.4.1.1732.2.1.47.1.1	INTEGER	read-only	Display Number
STR displayName	1.3.6.1.4.1.1732.2.1.47.1.2	DisplayString	read-only	Display name
STR displayLocation	1.3.6.1.4.1.1732.2.1.47.1.3	DisplayString	read-only	Display location
STR displayIP	1.3.6.1.4.1.1732.2.1.47.1.4	DisplayString	read-only	Ip address
INT displayOnline	1.3.6.1.4.1.1732.2.1.47.1.5	INTEGER	read-only	whether a display is online or not
control	1.3.6.1.4.1.1732.2.2
INT netSpireSystemBackup	1.3.6.1.4.1.1732.2.2.1	INTEGER	read-write	Set to one to commence system backup
INT netSpireSystemRestore	1.3.6.1.4.1.1732.2.2.2	INTEGER	read-write	Set to one to commence system restore
INT netSpireSystemSelfHealthCheck	1.3.6.1.4.1.1732.2.2.3	INTEGER	read-write	Set to one to initiate self health check
INT netSpireSystemFactoryReset	1.3.6.1.4.1.1732.2.2.4	INTEGER	read-write	Set to one to reset to factory defaults
INT netSpireSystemRestart	1.3.6.1.4.1.1732.2.2.5	INTEGER	read-write	Set to one to restart device
INT netSpireSystemReboot	1.3.6.1.4.1.1732.2.2.6	INTEGER	read-write	Set to one to reboot device
INT netSpireSystemIsolate	1.3.6.1.4.1.1732.2.2.7	INTEGER	read-write	Set to one to isolate device
TIK netSpireSystemSetTime	1.3.6.1.4.1.1732.2.2.8	TimeTicks	read-write	Set system time
INT netSpireSystemTimeZone	1.3.6.1.4.1.1732.2.2.9	INTEGER	read-write	Set system timezone offset in hours
netSpireDigitalOutControlTable	1.3.6.1.4.1.1732.2.2.10		read-write	Control for each Digital Output Port.
digitalOutControlEntry	1.3.6.1.4.1.1732.2.2.10.1		read-write	Digital Output Port Control
INT digitalOutControlPort	1.3.6.1.4.1.1732.2.2.10.1.1	INTEGER	read-only	Digital Output Control Port
INT digitalOutSetState	1.3.6.1.4.1.1732.2.2.10.1.2	INTEGER	read-write	Digital Output Set State

RFC description

Common device management objects for NetSpire devices. Provides device identification, status, alarm information, and system parameters.

Start monitoring Open Access NetSpire network device (identity, alarm, and system health telemetry) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OACOMMON-MIB