OACOMMON-MIB DEFINITIONS ::= BEGIN 

    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, Counter32    FROM SNMPv2-SMI
        oacommon                                              FROM OA-SMI
        DisplayString		                              FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP   FROM SNMPv2-CONF;

-- 1.3.6.1.4.1.1732.2.1.1

netspire MODULE-IDENTITY
      LAST-UPDATED "201610050000Z" -- 2016 October 5 12:00AM"
	ORGANIZATION "Open Access Pty Ltd."
	CONTACT-INFO
		"	Open Access Pty Ltd
			Customer Service

		Postal: PO Box 61 North Ryde Business Centre
			North Ryde,  1591
			Australia

		   Web: http://www.oa.com.au
		   Tel: +61 9978 7009
		E-mail: techsupport@oa.com.au"
       DESCRIPTION  "NetSpire device Common Detail"
       ::= { oacommon 1 }

-- ===========================================================================
-- ======================   Enumeration  G r o u p   =========================
-- ===========================================================================

-- 1.3.6.1.4.1.1732.2.1.1
netspireDeviceName OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device name"
    ::= { netspire 1 }

-- 1.3.6.1.4.1.1732.2.1.2
netspireDeviceUnitLocation OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Unit location"
    ::= { netspire 2 }

-- 1.3.6.1.4.1.1732.2.1.3
netSpireDeviceAlarmStatus OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Alarm Status"
    ::= { netspire 3 }

-- 1.3.6.1.4.1.1732.2.1.4
netSpireDeviceUptime OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Uptime in Seconds"
    ::= { netspire 4 }

-- 1.3.6.1.4.1.1732.2.1.5
netSpireDeviceCurrentTime OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Current Wall Time"
    ::= { netspire 5 }

-- 1.3.6.1.4.1.1732.2.1.6
netSpireDeviceTimeSource OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Time Source"
    ::= { netspire 6 }

-- 1.3.6.1.4.1.1732.2.1.7
netSpireDeviceRestartCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Restart Count"
    ::= { netspire 7 }

-- 1.3.6.1.4.1.1732.2.1.8
netSpireDeviceStorageUsed OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Storage Percentage"
    ::= { netspire 8 }

-- 1.3.6.1.4.1.1732.2.1.9
netSpireDeviceCPULoad OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device CPU Load Percentage"
    ::= { netspire 9 }

-- 1.3.6.1.4.1.1732.2.1.10
netSpireDeviceSystemTemperature OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device System Temperature in Celsius"
    ::= { netspire 10 }

-- 1.3.6.1.4.1.1732.2.1.11
netSpireDeviceDeviceSerialNo  OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Serial Number"
    ::= { netspire 11 }

-- 1.3.6.1.4.1.1732.2.1.12
netSpireDeviceProductionDate  OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Production Date"
    ::= { netspire 12 }

-- 1.3.6.1.4.1.1732.2.1.13
netSpireDeviceHardwareRevision  OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Hardware Revision"
    ::= { netspire 13 }

-- 1.3.6.1.4.1.1732.2.1.14
netSpireDeviceWarrantyExpiryDate  OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Warranty Expiry Date"
    ::= { netspire 14 }

-- 1.3.6.1.4.1.1732.2.1.15
netSpireDeviceBootFirmwareVersion  OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Boot Firmware Version"
    ::= { netspire 15 }

-- 1.3.6.1.4.1.1732.2.1.16
netSpireDeviceSystemFirmwareVersion  OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device System Firmware Version"
    ::= { netspire 16 }

-- 1.3.6.1.4.1.1732.2.1.17
netSpireDeviceFaultActive OBJECT-TYPE
    SYNTAX        INTEGER {
                      Inactive(0),
                      Active(1)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Whether the fault is active or not."
    ::= { netspire 17 } 

-- 1.3.6.1.4.1.1732.2.1.18
netSpireDeviceAlarmDescription OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Alarm Description"
    ::= { netspire 18 }

-- 1.3.6.1.4.1.1732.2.1.19
netSpireDeviceNonAckFaultActive OBJECT-TYPE
    SYNTAX        INTEGER {
                      Inactive(0),
                      Active(1)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Whether an unacknowledged fault is active or not."
    ::= { netspire 19 } 

-- 1.3.6.1.4.1.1732.2.1.20
netSpireDeviceInfoFaultCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "The number currently active alarms on the device where alarm severity is Info."
    ::= { netspire 20 }

-- 1.3.6.1.4.1.1732.2.1.21
netSpireDeviceMinorFaultCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "The number currently active alarms on the device where alarm severity is Minor."
    ::= { netspire 21 }

-- 1.3.6.1.4.1.1732.2.1.22
netSpireDeviceMajorFaultCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "The number currently active alarms on the device where alarm severity is Major."
    ::= { netspire 22 }

-- 1.3.6.1.4.1.1732.2.1.23
netSpireDeviceSevereFaultCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "The number currently active alarms on the device where alarm severity is Severe."
    ::= { netspire 23 }

-- 1.3.6.1.4.1.1732.2.1.24
netSpireDeviceInfoNonAckFaultCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "The number currently active alarms on the device that are not acknowledged where alarm severity is Info."
    ::= { netspire 24 }

-- 1.3.6.1.4.1.1732.2.1.25
netSpireDeviceMinorNonAckFaultCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "The number currently active alarms on the device that are not acknowledged where alarm severity is Minor."
    ::= { netspire 25 }

-- 1.3.6.1.4.1.1732.2.1.26
netSpireDeviceMajorNonAckFaultCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "The number currently active alarms on the device that are not acknowledged where alarm severity is Major."
    ::= { netspire 26 }

-- 1.3.6.1.4.1.1732.2.1.27
netSpireDeviceSevereNonAckFaultCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "The number currently active alarms on the device that are not acknowledged where alarm severity is Severe."
    ::= { netspire 27 }

-- 1.3.6.1.4.1.1732.2.1.28
currentMaxFaultSeverity OBJECT-TYPE
    SYNTAX        INTEGER {
                      none(0),
                      info(1),
                      minor(2),
					  major(3),
					  severe(4)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "The maximum severity of all currently active alarms."
    ::= { netspire 28 } 

-- 1.3.6.1.4.1.1732.2.1.29
currentMaxNonAckFaultSeverity OBJECT-TYPE
    SYNTAX        INTEGER {
                      none(0),
                      info(1),
                      minor(2),
					  major(3),
					  severe(4)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "The maximum severity of all currently active and not acknowledged alarms."
    ::= { netspire 29 } 

-- 1.3.6.1.4.1.1732.2.1.32
faults OBJECT-TYPE
    SYNTAX        SEQUENCE OF FaultEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION   "A table containing the faults for the device."
    ::= { netspire 32 }

-- 1.3.6.1.4.1.1732.2.1.32.1
fault OBJECT-TYPE
    SYNTAX        FaultEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION   "device fault definition"
    INDEX         { type }
    ::= { faults 1 }

FaultEntry ::=
    SEQUENCE {
        type          INTEGER,
        severity      INTEGER,
        module        DisplayString,
        errorText     DisplayString,
        acknowledged  DisplayString,
        device		  DisplayString
    }

-- 1.3.6.1.4.1.1732.2.1.32.1.1
type OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "The type of the fault."
    ::= { fault 1 }

-- 1.3.6.1.4.1.1732.2.1.32.1.2
severity OBJECT-TYPE
    SYNTAX        INTEGER {
                      none(0),
                      info(1),
                      minor(2),
                      major(3),
                      severe(4)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "The severity of the fault."
    ::= { fault 2 }

-- 1.3.6.1.4.1.1732.2.1.32.1.3
module OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "The module in which the fault was detected."
    ::= { fault 3 } 

-- 1.3.6.1.4.1.1732.2.1.32.1.4
errorText OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "A human readable summary of the fault."
    ::= { fault 4 } 

-- 1.3.6.1.4.1.1732.2.1.32.1.5
acknowledged OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Shows whether a user has acknowledged the fault."
    ::= { fault 5 } 

-- 1.3.6.1.4.1.1732.2.1.32.1.6
device OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "The device on which the alarm is active."
    ::= { fault 6 } 

-- 1.3.6.1.4.1.1732.2.1.33
netspireDigitalInCount OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Number of Digital Inputs present"
    ::= { netspire 33}

-- 1.3.6.1.4.1.1732.2.1.34
netspireDigitalOutCount OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Number of Digital Outputs present"
    ::= { netspire 34}

-- 1.3.6.1.4.1.1732.2.1.36
netspireDigitalInTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF DigitalInEntry
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Information for each Digital Input Port."
    ::= { netspire 36 }

digitalInEntry OBJECT-TYPE
    SYNTAX  DigitalInEntry
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Digital Input Port Information"
    INDEX   { digitalInPort }
    ::= { netspireDigitalInTable 1 }

DigitalInEntry ::=
    SEQUENCE {
        digitalInPort   	 DigitalInPort,
        digitalInName   	 DigitalInName,
	    digitalInState       DigitalInState
    }

digitalInPort OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Digital Intput port"
    ::= { digitalInEntry 1 }

digitalInName OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Digital Intput name"
    ::= { digitalInEntry 2 }

digitalInStatus OBJECT-TYPE
    SYNTAX        INTEGER {
                    Low(0),
                    High(1)
				 }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Digital Input status"
    ::= { digitalInEntry 3 }


-- 1.3.6.1.4.1.1732.2.1.37
netspireDigitalOutTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF DigitalOutEntry
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Information for each Digital Output Port."
    ::= { netspire 37 }

digitalOutEntry OBJECT-TYPE
    SYNTAX  DigitalOutEntry
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Digital Output Port Information"
    INDEX   { digitalOutPort }
    ::= { netspireDigitalOutTable 1 }

DigitalOutEntry ::=
    SEQUENCE {
        digitalOutPort   	 DigitalOutPort,
        digitalOutName   	 DigitalOutName,
	    digitalOutState      DigitalOutState
    }

digitalOutPort OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Digital Output port"
    ::= { digitalOutEntry 1 }

digitaloOutName OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Digital Output name"
    ::= { digitalOutEntry 2 }

digitalOutStatus OBJECT-TYPE
    SYNTAX        INTEGER {
                    Low(0),
                    High(1)
				 }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Digital Output status"
    ::= { digitalOutEntry 3 }


-- 1.3.6.1.4.1.1732.2.1.40
netspireDeviceDescription OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Description"
    ::= { netspire 40 }

-- 1.3.6.1.4.1.1732.2.1.41
netspireDeviceModelName OBJECT-TYPE
    SYNTAX        DisplayString
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "NetSpire device Model name"
    ::= { netspire 41 }
	
-- 1.3.6.1.4.1.1732.2.1.43
managedDeviceCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "Managed device Count"
    ::= { netspire 43 }	

-- 1.3.6.1.4.1.1732.2.1.44
managedDisplayCount OBJECT-TYPE
    SYNTAX        INTEGER
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION   "Managed Display Count"
    ::= { netspire 44 }	
	
-- 1.3.6.1.4.1.1732.2.1.46
managedDevicetable OBJECT-TYPE
    SYNTAX        SEQUENCE OF ManagedDeviceEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION   "A table containing the managed device."
    ::= { netspire 46 }

-- 1.3.6.1.4.1.1732.2.1.46.1
managedDevice OBJECT-TYPE
    SYNTAX        ManagedDeviceEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION   "Managed device"
    INDEX         { destinationNumber }
    ::= { managedDevicetable 1 }

ManagedDeviceEntry ::=
    SEQUENCE {
        destinationNumber           INTEGER,
        name        DisplayString,
        location     DisplayString,
        iP  DisplayString,
        online		  INTEGER
    }

-- 1.3.6.1.4.1.1732.2.1.46.1.1
destinationNumber OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "device Destination Number"
    ::= { managedDevice 1 }

-- 1.3.6.1.4.1.1732.2.1.46.1.2
name OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "device name"
    ::= { managedDevice 2 }

-- 1.3.6.1.4.1.1732.2.1.46.1.3
location OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "device location"
    ::= { managedDevice 3 } 

-- 1.3.6.1.4.1.1732.2.1.46.1.4
iP OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Ip address"
    ::= { managedDevice 4 } 

-- 1.3.6.1.4.1.1732.2.1.46.1.5
online OBJECT-TYPE
    SYNTAX        INTEGER {
					N(0),
					Y(1)
				  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "whether a device is online or not"
    ::= { managedDevice 5 } 

-- 1.3.6.1.4.1.1732.2.1.47
managedDisplaytable OBJECT-TYPE
    SYNTAX        SEQUENCE OF Display
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION   "A table containing the managed display."
    ::= { netspire 47 }
	
-- 1.3.6.1.4.1.1732.2.1.47.1
managedDisplay OBJECT-TYPE
    SYNTAX        Display
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION   "Managed Display"
    INDEX         { displayNumber }
    ::= { managedDisplaytable 1 }

Display ::=
    SEQUENCE {
        displayNumber           INTEGER,
        displayName        DisplayString,
        displayLocation     DisplayString,
        displayIP  DisplayString,
        displayOnline		  INTEGER
    }

-- 1.3.6.1.4.1.1732.2.1.47.1.1
displayNumber OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Display Number"
    ::= { managedDisplay 1 }

-- 1.3.6.1.4.1.1732.2.1.47.1.2
displayName OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Display name"
    ::= { managedDisplay 2 }

-- 1.3.6.1.4.1.1732.2.1.47.1.3
displayLocation OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Display location"
    ::= { managedDisplay 3 }

-- 1.3.6.1.4.1.1732.2.1.47.1.4
displayIP OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Ip address"
    ::= { managedDisplay 4 }

-- 1.3.6.1.4.1.1732.2.1.47.1.5
displayOnline OBJECT-TYPE
    SYNTAX        INTEGER {
					N(0),
					Y(1)
				  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "whether a display is online or not"
    ::= { managedDisplay 5 } 
	
-- ===========================================================================
-- ========================   Control  G r o u p   ===========================
-- ===========================================================================

-- 1.3.6.1.4.1.1732.2.2
control    OBJECT IDENTIFIER ::= { oacommon 2 }

-- 1.3.6.1.4.1.1732.2.2.1
netSpireSystemBackup OBJECT-TYPE
    SYNTAX        INTEGER {
                      Inactive(0),
                      InProgress(1)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set to one to commence system backup"
    ::= { control 1 } 


-- 1.3.6.1.4.1.1732.2.2.2
netSpireSystemRestore OBJECT-TYPE
    SYNTAX        INTEGER {
                      Inactive(0),
                      InProgress(1)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set to one to commence system restore"
    ::= { control 2 } 


-- 1.3.6.1.4.1.1732.2.2.3
netSpireSystemSelfHealthCheck OBJECT-TYPE
    SYNTAX        INTEGER {
                      Inactive(0),
                      InProgress(1)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set to one to initiate self health check"
    ::= { control 3 } 

-- 1.3.6.1.4.1.1732.2.2.4
netSpireSystemFactoryReset OBJECT-TYPE
    SYNTAX        INTEGER {
                      Inactive(0),
                      InProgress(1)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set to one to reset to factory defaults"
    ::= { control 4 } 


-- 1.3.6.1.4.1.1732.2.2.5
netSpireSystemRestart OBJECT-TYPE
    SYNTAX        INTEGER {
                      Inactive(0),
                      InProgress(1)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set to one to restart device"
    ::= { control 5 } 

-- 1.3.6.1.4.1.1732.2.2.6
netSpireSystemReboot OBJECT-TYPE
    SYNTAX        INTEGER {
                      Inactive(0),
                      InProgress(1)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set to one to reboot device"
    ::= { control 6 } 


-- 1.3.6.1.4.1.1732.2.2.7
netSpireSystemIsolate OBJECT-TYPE
    SYNTAX        INTEGER {
                      Available(0),
                      Isolated(1)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set to one to isolate device"
    ::= { control 7 } 


-- 1.3.6.1.4.1.1732.2.2.8
netSpireSystemSetTime OBJECT-TYPE
    SYNTAX        TimeTicks
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set system time"
    ::= { control 8 } 

-- 1.3.6.1.4.1.1732.2.2.9
netSpireSystemTimeZone OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Set system timezone offset in hours"
    ::= { control 9 } 

-- 1.3.6.1.4.1.1732.2.2.10
netSpireDigitalOutControlTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF DigitalOutControlEntry
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Control for each Digital Output Port."
    ::= { control 10 }

digitalOutControlEntry OBJECT-TYPE
    SYNTAX  DigitalOutControlEntry
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Digital Output Port Control"
    INDEX   { digitalOutPort }
    ::= { netSpireDigitalOutControlTable 1 }

DigitalOutControlEntry ::=
    SEQUENCE {
        digitalOutPort   	 DigitalOutControlPort,
	    digitalOutSetState   DigitalOutSetState
    }

digitalOutControlPort OBJECT-TYPE
    SYNTAX        INTEGER
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Digital Output Control Port"
    ::= { digitalOutControlEntry 1 }

digitalOutSetState OBJECT-TYPE
    SYNTAX        INTEGER {
				      High (0),
				      Low (1)
				 } 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION   "Digital Output Set State"
    ::= { digitalOutControlEntry 2 }

END