Nortel-Magellan-Passport-MgmtInterfacesMIB

All MIBs › Nortel-Magellan-Passport-MgmtInterfacesMIB

Category: Management & Admin Interfaces, Nortel Magellan Passport

Description: Provides SNMP management objects for configuring and monitoring management interfaces on Nortel Magellan Passport switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-Magellan-Passport-MgmtInterfacesMIB?

Nortel-Magellan-Passport-MgmtInterfacesMIB is a Nortel Networks (Magellan Passport WAN switch) proprietary MIB managing the Network Management Interface Server (NMIS) component. Its row-status table controls component creation/deletion, a local row-status table manages a local sub-component, a local-state table records admin/operational/usage state, and a local-operational table records max-allowed and active session counts alongside a local-session row-status table. As a configuration/status MIB it lets an administrator confirm NMIS session capacity and current active-session count on a Nortel Magellan Passport switch. It is deployed on Nortel Magellan Passport WAN switches. Engineers can download the Nortel-Magellan-Passport-MgmtInterfacesMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-MgmtInterfacesMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Magellan Passport WAN switches

Monitoring Examples

An administrator checks nmisLocalActiveSessions against nmisLocalMaxAllowedSessions to confirm NMIS session capacity headroom on a Nortel Magellan Passport switch.

What Can Be Monitored

NMIS session capacity and active-session count

Imported Objects

From Nortel-Magellan-Passport-StandardTextualConventionsMIB

DisplayString
Integer32
RowPointer
RowStatus
StorageType
Unsigned32

From Nortel-Magellan-Passport-TextualConventionsMIB

AsciiString
AsciiStringIndex
NonReplicated

From Nortel-Magellan-Passport-UsefulDefinitionsMIB

components	OBJECT-IDENTITY
passportMIBs	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
nmis	1.3.6.1.4.1.562.2.4.1.17
nmisRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.1		not-accessible	This entry controls the addition and deletion of nmis components.
nmisRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.1.1		not-accessible	A single entry in the table represents a single nmis component.
ROW nmisRowStatus	1.3.6.1.4.1.562.2.4.1.17.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmis components. These components cannot be added nor deleted.
STR nmisComponentName	1.3.6.1.4.1.562.2.4.1.17.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisStorageType	1.3.6.1.4.1.562.2.4.1.17.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmis tables.
NON nmisIndex	1.3.6.1.4.1.562.2.4.1.17.1.1.10	NonReplicated	not-accessible	This variable represents the index for the nmis tables.
nmisLocal	1.3.6.1.4.1.562.2.4.1.17.2
nmisLocalRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.2.1		not-accessible	This entry controls the addition and deletion of nmisLocal components.
nmisLocalRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.2.1.1		not-accessible	A single entry in the table represents a single nmisLocal component.
ROW nmisLocalRowStatus	1.3.6.1.4.1.562.2.4.1.17.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisLocal components. These components cannot be added nor deleted.
STR nmisLocalComponentName	1.3.6.1.4.1.562.2.4.1.17.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisLocalStorageType	1.3.6.1.4.1.562.2.4.1.17.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisLocal tables.
NON nmisLocalIndex	1.3.6.1.4.1.562.2.4.1.17.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the nmisLocal tables.
nmisLocalSession	1.3.6.1.4.1.562.2.4.1.17.2.2
nmisLocalSessionRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.2.2.1		not-accessible	This entry controls the addition and deletion of nmisLocalSession components.
nmisLocalSessionRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.2.2.1.1		not-accessible	A single entry in the table represents a single nmisLocalSession component.
ROW nmisLocalSessionRowStatus	1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisLocalSession components. These components cannot be added nor deleted.
STR nmisLocalSessionComponentName	1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisLocalSessionStorageType	1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisLocalSession tables.
I32 nmisLocalSessionIndex	1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.10	Integer32	not-accessible	This variable represents the index for the nmisLocalSession tables.
nmisLocalSessionOperTable	1.3.6.1.4.1.562.2.4.1.17.2.2.10		not-accessible	This group contains the operational attributes for a Local session.
nmisLocalSessionOperEntry	1.3.6.1.4.1.562.2.4.1.17.2.2.10.1		not-accessible	An entry in the nmisLocalSessionOperTable.
STR nmisLocalSessionUserid	1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.1	AsciiString	read-only	This attribute indicates the Userid logged in to the Session.
OCT nmisLocalSessionDataStreams	1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.2	OCTET STRING	read-write	This attribute indicates which data streams will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4)
NUM nmisLocalSessionHostCard	1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.3	RowPointer	read-only	This attribute holds the component name of the host control processor Card servicing the local operator session.
U32 nmisLocalSessionScreenWidth	1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.4	Unsigned32	read-write	This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width.
nmisLocalStateTable	1.3.6.1.4.1.562.2.4.1.17.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
nmisLocalStateEntry	1.3.6.1.4.1.562.2.4.1.17.2.10.1		not-accessible	An entry in the nmisLocalStateTable.
INT nmisLocalAdminState	1.3.6.1.4.1.562.2.4.1.17.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT nmisLocalOperationalState	1.3.6.1.4.1.562.2.4.1.17.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT nmisLocalUsageState	1.3.6.1.4.1.562.2.4.1.17.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
nmisLocalOperTable	1.3.6.1.4.1.562.2.4.1.17.2.11		not-accessible	This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers.
nmisLocalOperEntry	1.3.6.1.4.1.562.2.4.1.17.2.11.1		not-accessible	An entry in the nmisLocalOperTable.
U32 nmisLocalMaxAllowedSessions	1.3.6.1.4.1.562.2.4.1.17.2.11.1.1	Unsigned32	read-only	This attribute indicates the maximum number of simultaneous sessions the manager will allow.
U32 nmisLocalActiveSessions	1.3.6.1.4.1.562.2.4.1.17.2.11.1.2	Unsigned32	read-only	This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up.
nmisTelnet	1.3.6.1.4.1.562.2.4.1.17.3
nmisTelnetRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.3.1		not-accessible	This entry controls the addition and deletion of nmisTelnet components.
nmisTelnetRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.3.1.1		not-accessible	A single entry in the table represents a single nmisTelnet component.
ROW nmisTelnetRowStatus	1.3.6.1.4.1.562.2.4.1.17.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisTelnet components. These components cannot be added nor deleted.
STR nmisTelnetComponentName	1.3.6.1.4.1.562.2.4.1.17.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisTelnetStorageType	1.3.6.1.4.1.562.2.4.1.17.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisTelnet tables.
NON nmisTelnetIndex	1.3.6.1.4.1.562.2.4.1.17.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the nmisTelnet tables.
nmisTelnetSession	1.3.6.1.4.1.562.2.4.1.17.3.2
nmisTelnetSessionRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.3.2.1		not-accessible	This entry controls the addition and deletion of nmisTelnetSession components.
nmisTelnetSessionRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.3.2.1.1		not-accessible	A single entry in the table represents a single nmisTelnetSession component.
ROW nmisTelnetSessionRowStatus	1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisTelnetSession components. These components cannot be added nor deleted.
STR nmisTelnetSessionComponentName	1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisTelnetSessionStorageType	1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisTelnetSession tables.
I32 nmisTelnetSessionIndex	1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.10	Integer32	not-accessible	This variable represents the index for the nmisTelnetSession tables.
nmisTelnetSessionClient	1.3.6.1.4.1.562.2.4.1.17.3.2.2
nmisTelnetSessionClientRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.3.2.2.1		not-accessible	This entry controls the addition and deletion of nmisTelnetSessionClient components.
nmisTelnetSessionClientRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1		not-accessible	A single entry in the table represents a single nmisTelnetSessionClient component.
ROW nmisTelnetSessionClientRowStatus	1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisTelnetSessionClient components. These components cannot be added nor deleted.
STR nmisTelnetSessionClientComponentName	1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisTelnetSessionClientStorageType	1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisTelnetSessionClient tables.
NON nmisTelnetSessionClientIndex	1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the nmisTelnetSessionClient tables.
nmisTelnetSessionClientOperTable	1.3.6.1.4.1.562.2.4.1.17.3.2.2.10		not-accessible	This group contains the operational attributes for a Telnet client.
nmisTelnetSessionClientOperEntry	1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1		not-accessible	An entry in the nmisTelnetSessionClientOperTable.
NUM nmisTelnetSessionClientVirtualRouter	1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.1	RowPointer	read-only	This attribute indicates the VR instance that determines which address space the remoteIpAddr belongs to.
IP nmisTelnetSessionClientRemoteIpAddr	1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.2	IpAddress	read-only	This attribute indicates the IP address of the remote side of the client connection.
U32 nmisTelnetSessionClientRemoteTcpPort	1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.3	Unsigned32	read-only	This attribute indicates the TCP port number of the remote side of the client connection.
nmisTelnetSessionOperTable	1.3.6.1.4.1.562.2.4.1.17.3.2.10		not-accessible	This group contains the operational attributes for a Telnet session.
nmisTelnetSessionOperEntry	1.3.6.1.4.1.562.2.4.1.17.3.2.10.1		not-accessible	An entry in the nmisTelnetSessionOperTable.
STR nmisTelnetSessionUserid	1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.1	AsciiString	read-only	This attribute indicates the userid logged in to the session.
OCT nmisTelnetSessionDataStreams	1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.2	OCTET STRING	read-write	This attribute indicates which data streams (alarm, debug, log, scn) will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. When a client connection is up through this interface, all of the values are turned off. This means that this data is discarded when the session has a Telnet client connection set up. When the client connection terminates, the data which was being received prior to the client being set up is requested again. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4)
IP nmisTelnetSessionRemoteIpAddr	1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.3	IpAddress	read-only	This attribute indicates the IP address of the remote device connected to the session.
U32 nmisTelnetSessionRemoteTcpPort	1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.4	Unsigned32	read-only	This attribute indicates the TCP port number of the Telnet client being used on the remote device connected to the session.
U32 nmisTelnetSessionScreenWidth	1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.5	Unsigned32	read-write	This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width.
nmisTelnetStateTable	1.3.6.1.4.1.562.2.4.1.17.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
nmisTelnetStateEntry	1.3.6.1.4.1.562.2.4.1.17.3.10.1		not-accessible	An entry in the nmisTelnetStateTable.
INT nmisTelnetAdminState	1.3.6.1.4.1.562.2.4.1.17.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT nmisTelnetOperationalState	1.3.6.1.4.1.562.2.4.1.17.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT nmisTelnetUsageState	1.3.6.1.4.1.562.2.4.1.17.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
nmisTelnetOperTable	1.3.6.1.4.1.562.2.4.1.17.3.11		not-accessible	This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers.
nmisTelnetOperEntry	1.3.6.1.4.1.562.2.4.1.17.3.11.1		not-accessible	An entry in the nmisTelnetOperTable.
U32 nmisTelnetMaxAllowedSessions	1.3.6.1.4.1.562.2.4.1.17.3.11.1.1	Unsigned32	read-only	This attribute indicates the maximum number of simultaneous sessions the manager will allow.
U32 nmisTelnetActiveSessions	1.3.6.1.4.1.562.2.4.1.17.3.11.1.2	Unsigned32	read-only	This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up.
nmisFmip	1.3.6.1.4.1.562.2.4.1.17.4
nmisFmipRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.4.1		not-accessible	This entry controls the addition and deletion of nmisFmip components.
nmisFmipRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.4.1.1		not-accessible	A single entry in the table represents a single nmisFmip component.
ROW nmisFmipRowStatus	1.3.6.1.4.1.562.2.4.1.17.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisFmip components. These components cannot be added nor deleted.
STR nmisFmipComponentName	1.3.6.1.4.1.562.2.4.1.17.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisFmipStorageType	1.3.6.1.4.1.562.2.4.1.17.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisFmip tables.
NON nmisFmipIndex	1.3.6.1.4.1.562.2.4.1.17.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the nmisFmip tables.
nmisFmipSession	1.3.6.1.4.1.562.2.4.1.17.4.2
nmisFmipSessionRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.4.2.1		not-accessible	This entry controls the addition and deletion of nmisFmipSession components.
nmisFmipSessionRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.4.2.1.1		not-accessible	A single entry in the table represents a single nmisFmipSession component.
ROW nmisFmipSessionRowStatus	1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisFmipSession components. These components cannot be added nor deleted.
STR nmisFmipSessionComponentName	1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisFmipSessionStorageType	1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisFmipSession tables.
I32 nmisFmipSessionIndex	1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.10	Integer32	not-accessible	This variable represents the index for the nmisFmipSession tables.
nmisFmipSessionOperTable	1.3.6.1.4.1.562.2.4.1.17.4.2.10		not-accessible	This group contains the operational attributes for an FMIP session.
nmisFmipSessionOperEntry	1.3.6.1.4.1.562.2.4.1.17.4.2.10.1		not-accessible	An entry in the nmisFmipSessionOperTable.
STR nmisFmipSessionUserid	1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.1	AsciiString	read-only	This attribute indicates the userid logged in to the session.
OCT nmisFmipSessionDataStreams	1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.2	OCTET STRING	read-write	This attribute indicates which data streams will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4)
IP nmisFmipSessionRemoteIpAddr	1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.3	IpAddress	read-only	This attribute indicates the IP address of the remote device connected to the session.
U32 nmisFmipSessionRemoteTcpPort	1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.4	Unsigned32	read-only	This attribute indicates the TCP port number of the FMIP client being used on the remote device connected to the session.
U32 nmisFmipSessionScreenWidth	1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.5	Unsigned32	read-write	This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width.
nmisFmipStateTable	1.3.6.1.4.1.562.2.4.1.17.4.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
nmisFmipStateEntry	1.3.6.1.4.1.562.2.4.1.17.4.10.1		not-accessible	An entry in the nmisFmipStateTable.
INT nmisFmipAdminState	1.3.6.1.4.1.562.2.4.1.17.4.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT nmisFmipOperationalState	1.3.6.1.4.1.562.2.4.1.17.4.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT nmisFmipUsageState	1.3.6.1.4.1.562.2.4.1.17.4.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
nmisFmipOperTable	1.3.6.1.4.1.562.2.4.1.17.4.11		not-accessible	This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers.
nmisFmipOperEntry	1.3.6.1.4.1.562.2.4.1.17.4.11.1		not-accessible	An entry in the nmisFmipOperTable.
U32 nmisFmipMaxAllowedSessions	1.3.6.1.4.1.562.2.4.1.17.4.11.1.1	Unsigned32	read-only	This attribute indicates the maximum number of simultaneous sessions the manager will allow.
U32 nmisFmipActiveSessions	1.3.6.1.4.1.562.2.4.1.17.4.11.1.2	Unsigned32	read-only	This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up.
nmisFtp	1.3.6.1.4.1.562.2.4.1.17.5
nmisFtpRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.5.1		not-accessible	This entry controls the addition and deletion of nmisFtp components.
nmisFtpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.5.1.1		not-accessible	A single entry in the table represents a single nmisFtp component.
ROW nmisFtpRowStatus	1.3.6.1.4.1.562.2.4.1.17.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisFtp components. These components cannot be added nor deleted.
STR nmisFtpComponentName	1.3.6.1.4.1.562.2.4.1.17.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisFtpStorageType	1.3.6.1.4.1.562.2.4.1.17.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisFtp tables.
NON nmisFtpIndex	1.3.6.1.4.1.562.2.4.1.17.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the nmisFtp tables.
nmisFtpSession	1.3.6.1.4.1.562.2.4.1.17.5.2
nmisFtpSessionRowStatusTable	1.3.6.1.4.1.562.2.4.1.17.5.2.1		not-accessible	This entry controls the addition and deletion of nmisFtpSession components.
nmisFtpSessionRowStatusEntry	1.3.6.1.4.1.562.2.4.1.17.5.2.1.1		not-accessible	A single entry in the table represents a single nmisFtpSession component.
ROW nmisFtpSessionRowStatus	1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of nmisFtpSession components. These components cannot be added nor deleted.
STR nmisFtpSessionComponentName	1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO nmisFtpSessionStorageType	1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the nmisFtpSession tables.
I32 nmisFtpSessionIndex	1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.10	Integer32	not-accessible	This variable represents the index for the nmisFtpSession tables.
nmisFtpSessionOperTable	1.3.6.1.4.1.562.2.4.1.17.5.2.10		not-accessible	This group contains the operational attributes for an FTP session.
nmisFtpSessionOperEntry	1.3.6.1.4.1.562.2.4.1.17.5.2.10.1		not-accessible	An entry in the nmisFtpSessionOperTable.
STR nmisFtpSessionUserid	1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.1	AsciiString	read-only	This attribute indicates the userid logged in to the session.
IP nmisFtpSessionRemoteIpAddr	1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.2	IpAddress	read-only	This attribute indicates the IP address of the remote device connected to the session.
U32 nmisFtpSessionRemoteTcpPort	1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.3	Unsigned32	read-only	This attribute indicates the TCP port number of the FTP control connection being used on the remote device connected to the session.
nmisFtpStateTable	1.3.6.1.4.1.562.2.4.1.17.5.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
nmisFtpStateEntry	1.3.6.1.4.1.562.2.4.1.17.5.10.1		not-accessible	An entry in the nmisFtpStateTable.
INT nmisFtpAdminState	1.3.6.1.4.1.562.2.4.1.17.5.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT nmisFtpOperationalState	1.3.6.1.4.1.562.2.4.1.17.5.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT nmisFtpUsageState	1.3.6.1.4.1.562.2.4.1.17.5.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
nmisFtpOperTable	1.3.6.1.4.1.562.2.4.1.17.5.11		not-accessible	This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers.
nmisFtpOperEntry	1.3.6.1.4.1.562.2.4.1.17.5.11.1		not-accessible	An entry in the nmisFtpOperTable.
U32 nmisFtpMaxAllowedSessions	1.3.6.1.4.1.562.2.4.1.17.5.11.1.1	Unsigned32	read-only	This attribute indicates the maximum number of simultaneous sessions the manager will allow.
U32 nmisFtpActiveSessions	1.3.6.1.4.1.562.2.4.1.17.5.11.1.2	Unsigned32	read-only	This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up.
ac	1.3.6.1.4.1.562.2.4.1.18
acRowStatusTable	1.3.6.1.4.1.562.2.4.1.18.1		not-accessible	This entry controls the addition and deletion of ac components.
acRowStatusEntry	1.3.6.1.4.1.562.2.4.1.18.1.1		not-accessible	A single entry in the table represents a single ac component.
ROW acRowStatus	1.3.6.1.4.1.562.2.4.1.18.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of ac components. These components can be added.
STR acComponentName	1.3.6.1.4.1.562.2.4.1.18.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO acStorageType	1.3.6.1.4.1.562.2.4.1.18.1.1.4	StorageType	read-only	This variable represents the storage type value for the ac tables.
NON acIndex	1.3.6.1.4.1.562.2.4.1.18.1.1.10	NonReplicated	not-accessible	This variable represents the index for the ac tables.
acUserid	1.3.6.1.4.1.562.2.4.1.18.2
acUseridRowStatusTable	1.3.6.1.4.1.562.2.4.1.18.2.1		not-accessible	This entry controls the addition and deletion of acUserid components.
acUseridRowStatusEntry	1.3.6.1.4.1.562.2.4.1.18.2.1.1		not-accessible	A single entry in the table represents a single acUserid component.
ROW acUseridRowStatus	1.3.6.1.4.1.562.2.4.1.18.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of acUserid components. These components can be added and deleted.
STR acUseridComponentName	1.3.6.1.4.1.562.2.4.1.18.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO acUseridStorageType	1.3.6.1.4.1.562.2.4.1.18.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the acUserid tables.
STR acUseridIndex	1.3.6.1.4.1.562.2.4.1.18.2.1.1.10	AsciiStringIndex	not-accessible	This variable represents the index for the acUserid tables.
acUseridProvTable	1.3.6.1.4.1.562.2.4.1.18.2.10		not-accessible	This group contains the provisionable attributes for a userid.
acUseridProvEntry	1.3.6.1.4.1.562.2.4.1.18.2.10.1		not-accessible	An entry in the acUseridProvTable.
STR acUseridPassword	1.3.6.1.4.1.562.2.4.1.18.2.10.1.1	AsciiString	write-only	This attribute holds the password for the userid. This is a write-only attribute to provide additional security for passwords. The password string consists of 5-8 characters, which may be any printable ASCII characters. If the password string includes any non-alphanumeric character, such as $ or *, the entire string must be enclosed in double quotes. Letters in the password string are case-sensitive.
U32 acUseridCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.18.2.10.1.2	Unsigned32	read-write	This attribute indicates the Customer Identifier (CID) assigned to the userid. The CID is used in Customer Network Management (CNM). A CNM operator may only send commands to components provisioned with the same CID as the operator. A CNM operator will only receive event data, such as alarms, which is generated by components provisioned with the same CID as the operator. The special CID of 0 is reserved for the network owner, known as the Netman. The Passport CID attribute is compatible with DPN-100 Netman and Basic CIDs.
INT acUseridCommandScope	1.3.6.1.4.1.562.2.4.1.18.2.10.1.3	INTEGER	read-write	This attribute indicates the command scope assigned to the userid. The scope determines the importance of the components on which the userid will be allowed to execute commands. Scope has three levels: 1) Network scope implies the userid can manage components that affect the operation of the entire network, such as trunks. 2) Device scope implies the userid can manage components that affect the operation of the entire Passport module, such as processors or the file system. 3) Application scope implies the userid can manage components that affect the operation of a single application. Note that scope is hierarchical: A userid provisioned with network scope can also manage components with a scope of device or application.
INT acUseridCommandImpact	1.3.6.1.4.1.562.2.4.1.18.2.10.1.4	INTEGER	read-write	This attribute indicates the command impact assigned to the userid. The impact determines the importance of the commands which the userid will be allowed to execute. Impact has five levels: 1) Debug impact implies the userid can issue all debugging commands. Debug is the highest impact level. 2) System Administration impact implies the userid can issue provisioning commands on security components. This means the userid can Add, Delete, Display, or Set the Userid and IpAccess subcomponents of AccessControl. 3) Configuration impact implies the userid can issue provisioning commands to alter the provisioned configuration of the Passport module, such as Start Prov, Add, Delete, and Set. 4) Service impact implies the userid can issue operational commands which may affect the service of running components, such as Lock and Unlock. 5) Passive impact implies the userid can only issue query commands which display unrestricted information but otherwise do not affect the operation or configuration of the Passport module. Commands such as List and Display. Passive is the lowest impact level. Note that impact is hierarchical: A userid provisioned with debug impact can also issue all other commands at lower impact levels.
OCT acUseridAllowedAccess	1.3.6.1.4.1.562.2.4.1.18.2.10.1.5	OCTET STRING	read-write	This attribute indicates the set of network management interfaces through which the userid will be allowed incoming access to the Passport. The allowedAccess attribute can be used to restrict a userid to a desired subset of the network management interfaces provided. Description of bits: local(0) telnet(1) fmip(2) ftp(3)
STR acUseridLoginDirectory	1.3.6.1.4.1.562.2.4.1.18.2.10.1.6	AsciiString	read-write	This attribute is the login directory for file system commands or FTP commands. The userid will initially be placed in this directory upon logging in to Telnet, FMIP, Local or FTP. The default value of '/' is the root of the /sfs/ shadowed file system.
OCT acUseridAllowedOutAccess	1.3.6.1.4.1.562.2.4.1.18.2.10.1.7	OCTET STRING	read-write	This attribute indicates whether or not the userid will be allowed outgoing Telnet access from the Passport. Description of bits: telnet(0)
acIpAccess	1.3.6.1.4.1.562.2.4.1.18.3
acIpAccessRowStatusTable	1.3.6.1.4.1.562.2.4.1.18.3.1		not-accessible	This entry controls the addition and deletion of acIpAccess components.
acIpAccessRowStatusEntry	1.3.6.1.4.1.562.2.4.1.18.3.1.1		not-accessible	A single entry in the table represents a single acIpAccess component.
ROW acIpAccessRowStatus	1.3.6.1.4.1.562.2.4.1.18.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of acIpAccess components. These components can be added and deleted.
STR acIpAccessComponentName	1.3.6.1.4.1.562.2.4.1.18.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO acIpAccessStorageType	1.3.6.1.4.1.562.2.4.1.18.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the acIpAccess tables.
IP acIpAccessIndex	1.3.6.1.4.1.562.2.4.1.18.3.1.1.10	IpAddress	not-accessible	This variable represents the index for the acIpAccess tables.
acIpAccessProvTable	1.3.6.1.4.1.562.2.4.1.18.3.10		not-accessible	This group contains the provisionable attributes for an IpAccess component.
acIpAccessProvEntry	1.3.6.1.4.1.562.2.4.1.18.3.10.1		not-accessible	An entry in the acIpAccessProvTable.
IP acIpAccessIpAddressMask	1.3.6.1.4.1.562.2.4.1.18.3.10.1.1	IpAddress	read-write	This attribute indicates the bit mask indicating the significant bits which are used in the comparison of an incoming IP address against the 'friendly' IP address in the instance value of the IpAccess component. This bit mask is ANDed to the incoming IP address, and ANDed to the instance value, before the comparison. An IP subnetwork address, in combination with this bit mask attribute, may be provisioned to include an entire IP subnetwork into the friendly IP address list with a single IpAccess component.
acProvTable	1.3.6.1.4.1.562.2.4.1.18.10		not-accessible	This group contains the provisionable attributes which apply to the overall access of the the node.
acProvEntry	1.3.6.1.4.1.562.2.4.1.18.10.1		not-accessible	An entry in the acProvTable.
OCT acPublicKeyAuth	1.3.6.1.4.1.562.2.4.1.18.10.1.1	OCTET STRING	read-write	This attribute indicates whether Telnet sessions require a public key exchange in order to log in to the node. FMIP sessions always require a public key exchange for login authentication. Description of bits: telnet(0)
mgmtInterfacesMIB	1.3.6.1.4.1.562.2.4.2.15
mgmtInterfacesGroup	1.3.6.1.4.1.562.2.4.2.15.1
mgmtInterfacesGroupBE	1.3.6.1.4.1.562.2.4.2.15.1.5
mgmtInterfacesGroupBE01	1.3.6.1.4.1.562.2.4.2.15.1.5.2
mgmtInterfacesGroupBE01A	1.3.6.1.4.1.562.2.4.2.15.1.5.2.2
mgmtInterfacesCapabilities	1.3.6.1.4.1.562.2.4.2.15.3
mgmtInterfacesCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.15.3.5
mgmtInterfacesCapabilitiesBE01	1.3.6.1.4.1.562.2.4.2.15.3.5.2
mgmtInterfacesCapabilitiesBE01A	1.3.6.1.4.1.562.2.4.2.15.3.5.2.2

RFC description

Management interfaces (Telnet, FTP, SNMP, FMIP) configuration for Nortel Magellan Passport switches.

Start monitoring Nortel Magellan Passport WAN switch (Network Management Interface Server) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-Magellan-Passport-MgmtInterfacesMIB

What Is Nortel-Magellan-Passport-MgmtInterfacesMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description